E72 phone conversation speaker way too low at max ...

Hi,
I checked three E72 units. In all three, the speaker, when at full volume, is way too quiet. This applies to phone conversations put on speaker or off speaker (unit next to ear). In comparison, my previous phone (Nokia 6131) doesn't exhibit this major fault.
I checked with the local distributor, Eurocom Israel, and they experimented a bit and eventually confirmed my findings.
Is there a technical solution to this issue? It really is a shame for an otherwise decent phone...
Thanks,
--Neta

Hi patroni73
I too have noticed that ever since my last upgrade to 7.0.4 on my iPhone4s I am having the same trouble of increasing speaker volume to High. Although all of the tools (my volume bars on locked screen, side + bar, General Settings volume) are all the way up to max with my side switch to ON my ringtones and sounds are all very low. It feels like this latest upgrade has forgotten the speaker system controls and took care of whatever else the problem was.
Before the ios 7.0.4 upgrade, my iPhone 4s speaker was high enough and working just fine. Please help!!!

Similar Messages

Earpiece voume way too low.............E71

Hey all,
the earpiece volume on my E71 is WAY too low. How can i get this increased ?
Thanks

during a call you can hit the volume button on your phone to increase volume... It's hard to know exactly how low it is for us others, but if youre volume is set to full and you cannot hear a got damned thing, and you've made sure the people who call you are speaking directly into the phone, and you don't have a ear damage, it might be a faulty earpiece.
I remember I had no troubles with my E71 when it came to earpiece volume even outside.
Has it always been like this? When did you buy your phone?

HP Pavilion DV6 Notebook Speaker Volume Too Low

I have all speaker/audio settings everywhere set at maximum, but the speaker volume I get when I play any kind of audio or video feed from anywhere is way too low. (If I plug external speakers into the headphone jack, the volume is much better.) I've seen all of the posts where the solution was to do something on the "Enhancements" tab in Playback Devices, Properties, but I don't have that tab on my system. When I go into the Configure option and do the audio test, the volume there is great! I've also checked for updates on my audio drivers and the results have come back saying I have the best version already.
I've been putting up with this for a long time, but I'm really tired of having to plug external speakers in when I want to watch a video or listen to streaming music. I'd appreciate any suggestions (other than the one involving the "Enhancements" tab that I don't have) that might help fix this problem!

Hello @Lagil ,
Welcome to the HP Forums!
I understand the audio appears to be way too low. I will do my best to help! First, please provide the following information and try the following steps:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
5. What steps have been attempted from the following thread, and what were the results: Troubleshooting Guide: Audio does not Work after a Certain Period of Time
Thanks!
Mario
I worked on behalf of HP.

Pavilion g6-1322tx, suddenly volume of speaker turned too low (not mute). system & player volume max

Hello,
My hp notebook pavilion g6-1322tx just working amaizing and I'm so happy with this device. But suddenly oneday when I was watching a movie in VLC player, I maximized the volume of player and system (Windows 7 64-bit) and then after few minutes suddenly volume of speaker turned too low like 1%!!!! Headphone working just fine and loudy. I had already tried to update IDT driver and it's not fixing my problem.
Please please gimme a solution. Thanks in advance.
Regards,
M. Rony

Hi
Please try doing a system restore to the date where unit was working fine.
Aslo update the Bios on the unit.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

T420 Microphone volume way too low

Hi,
I am having a problem with my ThinkPad's microphone. The problem occurs with the internal microphone as well as an external microphone. The volume is way too low. I need to have my mouth very close (almost against it) to the microphone in order to be able to record anything and therefore to be able to see my microphone level shift at the recording devices section of Windows. Because of this using a mic is pretty much impossible. The sound level recorded is way too low.
I have tried a lot of things and settings: I have deleted the SoundMax drivers to try the drivers that Windows installs by default, and they don't work either. I have tried the put the microphone boost level to the highest settings possible and it certainly helps, but it is still almost just as bad, plus the noise added when boosting the level is unacceptable. I have also checked if the microphone sound recorded isn't being played through the speakers and it isn't. I also disabled any type of post signal processing I came across, but this also didn't help.
As a last resort I completely reinstalled Windows on my system and installed the SoundMax drivers again, but this didn't work either.
Important thing:
I just tried a Ubuntu live CD and the microphone worked fine. I could just sit away from it and talk to it and it would record my voice pretty good. So I guess the whole problem is pretty much software related.
Some side info:
As external mic I was using a headset that comes with almost any type of smartphone nowadays, a headset which has a small (and usually clip-on) microphone and a four pole jack-plug (which the T420 only accepts unfortunately).
OS: Windows 7 64 bit Professional
I really, really hope someone is able to help me with my problem. I love my T420, but this is just unacceptable and very annoying.

Try disabling all of the Conexant services in Services.
Also go into Sound, Recording, Internal Microphone, Levels tab.
Set volume to 100, and boost to +10. This is what works optimally for my W520 on TeamSpeak.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Speaker volume too low on 3GS - any way to increase it?

The speaker volume is too low on my IPhone 3GS. Other than the volume control is there any other way to increase it?

With volume control do you mean the buttons on the side of the phone? or in settings? When playing something on speaker and i want it louder, I just click the up button on the side of the phone.

3000 530G Speaker level is way too low

I just got my Lenevo last week. When I play a dvd and have the sound all the way up it is just loud enough to hear if there is not backround noise. If you put in earphones u have to turn it down. I have checked all the levels and they are on high. Not sure what the issue is?

Did you find out any solution about the speaker volume being low?
I'm currently having the same problem.
Thanks in advance

Alarm volume way too low

Droid Razor Maxx, 2 days old. Alarm volume is just barely audible if I put my ear next to the speaker. Ringer volume seems ok and the speakerphone seems ok as well. Yes, I've gone to settings volume and turned all of them up. I also went to the alarm app itself and made sure it was all the way up also.
The alarm volume is only audible if you actually put the phone up to your ear.
Suggestions??

The cache was already empty and it (of course) didn't have a clear button. Data had a tiny bit in it, cleared that. Alarm volume was unchanged; still too low.
When I go to settings>sound>volume and move the alarm slider from the far right to the middle then back to the far right, the alarm sounds, but it is exactly the same volume....too low.
Factory Reset?? Doesn't that mean I get to spend a couple of hours setting the phone up again??

HomeFusion 4G/LTE data caps way too low!!! Please raise them!!

I've had HomeFusion 4G/LTE since January 5th and I absolutely love the speed and low latency over satellite. There's just one big problem that I'm really disturbed about and that's the extremely low data cap it has. I'm paying $135 a month for the 30GB package and I've already hit 25GB in just over 2 weeks. I've watched no movies other than what videos I watch on YouTube. I've downloaded no movies or software in ISO format. I have played WOW a few hours over the past couple of weeks but that uses very little data.
This HomeFusion is being used by a family household and I can tell you that unless I just tell everyone to just not use the internet, there's no way 30GB is going to be enough data. Supposedly for the first 2 months I'm on some kind of promotional period that actually gives me 45GB, but then it's suppose to drop down to the 30GB thereafter.
If VZW doesn't raise the caps to real world usage expectations, then I'm going to be spending $300 a month on this connection just to get the extra 15GB that's being offered during the promotional period. That's $10 per 1GB over your limit, which 15GB is $150, then added to the $135 already which will be $285 plus taxes.. That's outrageous for a fixed 4G/LTE connection to my house.
I'm out in the sticks and probably 1 of only a few that are using the tower for the 4G/LTE it offers. I seriously doubt I'm causing any congestion with how I use my connection.
Hopefully there are other HomeFusion customers that see the need for VZW to amp up the data caps to something more realistic at around 100GB.
Recently an article came out showing that the ISPs were using data caps to solely monetize data usage and it had nothing to do with congestion.
http://www.techspot.com/news/51392-former-fcc-chair-isp-data-caps-are-about-monetization-not-network-congestion.html
Isn't $135 for a 4G/LTE connection at home already too much?? Come on VZW, please raise the data caps or better yet, eliminate them and just charge for the connection.

TexasRebel wrote:
Man..spare me the `there's only so much bandwidth to go around' speech. I live out in a podunk town that is serviced by AT&T, Verizon and Sprint, along with all the other smaller carriers. There's maybe like a dozen people in my area that might even have HomeFusion and that's because they are crazy enough to shell out $60-$120 a month for a better internet experience than satellite.
Just because YOUR area has few people doesn't mean that what Verizon should base pricing on. Verizon has standardize pricing. So they have to price for ALL areas.
I just want more data than the 30GB,, because number 1, HomeFusion is marketed as a home residential service. It's not like there are thousands of smart phones like in a mid-sized city accessing it. It's a broadband product that is marketed for family use. 30GB is a joke to give a family, when whoever it is that runs the HomeFusion department knows that a family can easily eat up 100GB if everyone were to stream movies and play games. 100GB would be more than enough for the HomeFusion subscriber that has to pay $150 just for internet. LTE is delivering 40+Mbps where I'm located.. I would settle for 10Mbps for my needs.
LTE is not a replacement for REAL internet. That's just factual. So if yo want REAL internet you'll have to move where it is. Maybe that's not fair but that's the reality. Maybe in a couple of years you can get more than 30 GB.
If Verizon is so concerned about bandwidth consumption, then use QoS metrics to balance out the bandwidth to everyone connected to a specific tower if congestion is detected.. You act like if someone uses 100GB of data over a wireless connection it's eating up all the available bandwidth a tower might have.. Not really. Suppose that 100GB is being scheduled to download at late night when the network is generally idle??
Ok then everyone will get 500 kbps. How does that sound?
I've had both Exede and Hughesnet Gen4. Fast they are, but they pull the same crap that the wireless carriers are pulling.. Claiming that people who use too much data are congesting their networks.. That's a load of crap. What's congesting the network is having low bandwidth and having too many people eating up that bandwidth to download content.. If you have 50Mbps wireless that download takes a fraction of the time it would take someone with 3-5Mbps. They get what they want fast and the available bandwidth becomes free again for whoever else may need it.
Just like mobile they are bandwidth constrained. You can belive what you want. Not believing the truth doesn't make it not true. 2+2=4 no matter how much you want it to equal 5.
It's basically called control. The carriers want control of what you can do on their networks. It used to be subscribers just paid for the connection fee and they did what they wanted. But ever since carriers thought they could monetize data usage and there's no law for them to not do it, they do whatever they want, squeezing the customer for more and more money...
Even if what you said was 100% true there is nothing you can do about it. Coming here to complain certainly won't do anything. Your choice is to either pay or not to pay.
VZW has 115 million subscribers.. do the math. They make billions each month. They make more than enough money to put back into their network to increase capacity. So does AT&T. If either carrier doesn't want their wireless networks to become too congested, then start upgrading their wireline services to fiber/cable instead of claiming they are dumping wireline services and pushing people to wireless..
Actually they do invest in their networks. They spend billions each year. Verizon has 20 MHz total for LTE right now. 10 for uplink 10 for downlink. That has to be share with Homefusion and mobile data customers both residential and business. Spectrum is a finite resource. It will take time to acquire and deploy it. Try doing some research on how mobile technology works before question the validity of what I'm saying. I did the research you should too. My posts are based on FACTS not wishes or conspiracy theories..

Palm Pre Sound System WAY TOO LOW

Omg it worked perfectly a couple of hours ago and now is really low whenver im throwin a task or window away the little sound it makes can barelly be heard
I checked on sounds & ringtones and the volume is all the way up
what can be wrong with it?
Post relates to: Pre p100eww (Sprint)

I have an iPhone 5 and I noticed this too when I installed the update to iOS 7. I miss all my calls now! Hopefully they fix this sooner than later... Just ***** we have to wait for a huge update instead of sending us a fix for just the volume RIGHT NOW!

E51 - speaker volume too low.

Hi All, I have an E51 and the problem I have is it's so hard to hear anything.
I have to press the handset into my ear and place the hearing area directly over my ear .
Volume is already on max when I press volume up button on the right side of the phone,
or right on the navigation button during call.
and I've upgraded to 3xx, but it still is low!
Too many friend have the same problem.
Please Help......

I am sure the warranty on your phone is expired and you don't really care. I also know your intentions are genuine and you mean well.
However, discussions involving the disassembly of phones is expressly prohibited by Nokia because it may result in other users voiding their warranties.
Don't take this personally because I agree with your post but it may be removed by the moderators in the morning..

"Patton"/"Tora Tora Tora!" album low volume is way TOO low

Hello,
I was going to use the echoing trumpet and flute in the main title music of "Patton" in a military-themed video. But, with all volume controls UP, the low parts of the music on ALL tracks are essentially not there. You can hear this on the 30-second sample on the iTunes site. And looking at the waveform, in iMovie, there is no waveform. So, I've wasted $9.99. Can this be fixed? Anyone downloading this would have the same problem, I suppose.
Thank You.

Well, my friend says the low volume of quieter passages being WAY low is the same on the vinyl, so "I guess I'm satisfied".
Thank you.

Volume way too low!

what should i do? i cant even here it outside in the rain. its annoying paying 600 bucks for a low volume phone

You are not alone. This is one of the most viewed topics on the fourms here.
Options include;
Send iPhone in for repair. (other have had success doing that).
Leave Apple Feedback (might help for next model).
Hope for a fix from Apple, again Feedback to Apple is important.
Buy anothr cell phone for calls and keep this one for the iPod and web stuff.

Airport signal strength seems way too low...possible for antenna to break?

Hi,
I have a 17" aluminum Powerbook 1.33Ghz that came with built in Airport. I use it on wireless networks both at home and at work. In recent weeks, it's seemed like my connection drops a lot or I have a hard time getting a solid signal.
Right now at work I'm sitting about 15 feet and through a sheetrock wall from a Cisco Aironet 1200 wireless access point, which I understand to be a quality item...MacStumbler is showing a signal strength in the low 20s, but can sometimes jump up to around 50. It seems like the Airport menubar icon used to always show full strength at work, but lately usually shows 2-3 bars.
At home I get a signal strength in the 30s when parked right next to my Airport Extreme, and have trouble losing connection in other parts of the house. An older Powerbook one floor above gets a signal strength in the 60s.
I'm considering the following options:
(a) Take Powerbook apart and see if the antenna has somehow become detached from the Airport card.
(b) Buy an upgraded antenna for the Powerbook from QuickerTek.com
(c) Open an AppleCare ticket, but I hate to send the PB to Texas even for a few days.
or is there something else I should be doing? or is this normal?

From reading your post it sounds like Interference.
In a commercial building you will find that the Metal Studs used in the construction, will and can Interfere, not to mention Metal Bookcases. Just about anything metal.
http://www.wi-fiplanet.com/tutorials/article.php/1497111
Note the 3rd paragrapgh
This of course doesn't rule out that you could have a loose Antenna connection, or your Airport Extreme Card could have become unseated, or loose as well.
Remember the use of microwave, wireless phones and any number of other things can cause Interference.
Cheers Don

Adding assets to Windows Phone project takes way too much time !

So I'm trying to make a universal app for Windows 8.1 and Windows Phone 8.1. Back when I was doing a WP 8.0 app it took an extreme amount of time to mark all my assets as content since when I drop in my compiled shader files (with .vs and .ps extensions)
VS doesn't know they are meant to be content so I have to do that manually.
I'm now seeing how marking just 4 files as "Content" in VS2013 in a universal app takes around 10+ seconds ! Is there an extension list somewhere so that when I add in the files they're marked as Content by default ?
Also, I might add that I have around 6000 shaders in my project and I tried marking about 1000 at a time, waited 10 minutes and it wasn't done ! (Visual Studio hanged !). It feels as though it tries to reload all assets in the project for every small little
change.
http://www.facebook.com/relativegames

Yes, I already know that the project file is an XML, the problem is 1) that I need to also add the "Copy Always" flag which is a child to the Content tag
<Content Include="Shaders\DX11\4_0_level_9_3\UberShader_PS_-48991411.info.xml"> <CopyToOutputDirectory>Always</CopyToOutputDirectory> </Content> <Content Include="Shaders\DX11\4_0_level_9_3\UberShader_PS_-602767781.info.xml"> <CopyToOutputDirectory>Always</CopyToOutputDirectory> </Content>
and doing copy-paste for 6000 items is not something I want to do all day and 2) We're in 2015 and all of a sudden IDEs are not useable anymore and we need to go to manual file editing because it takes 1 second to modify 1 attribute ?
Furthermore I would classify this issue as a VS bug that shouldn't go through QA, is there a public bug reporter for Visual Studio ? Take note that this issue existed for the past 2 years, ever since the WP8.0 SDK. I kind of thought that VS2013 or Update
1 through 4 would fix this :|
UPDATE : One more oddity that came up, I just added a couple more .cs files to a Universal App and for some reason my PC was running slow, then I found these processes
Were pretty much eating 80% of my CPU. The other devenv.exe is from a solution I closed like 10 minutes before.
I also noticed how if I change the source control plug-in to none, every time I open my Universal App .sln I get the Git plug-in again !
http://www.facebook.com/relativegames

E72 phone conversation speaker way too low at max ...

Similar Messages

Maybe you are looking for