E72 :: Ringtones according to Contact Groups

On the E72, if you have tingtones associated to Caller Groups and a particular Contact is a member of 2 (or even 3) Groups, which ringtone will sound when he calls in?
There ought to be laws out there on the use of the term 'smartphone'

No Sujay, please read my question again - I've not assigned any ringtone directly to the contact.
I have a contact that is a member of TWO groups. each of the groups have been assigned a different ringtone. ...... So which ringtine will be played when that contact calls in?
Or are you saying that both the ringtones for the 2 groups will be IGNORED and instead the default ringtone will be played?
There ought to be laws out there on the use of the term 'smartphone'

Similar Messages

Contact Groups

Hi all,
I have a few groups in my Contacts, and every now and then I add a contact to the wrong group, or a contact moves to a different group for some or other reason.
How can I move a contact from one group to another without having to delete from the wrong group and recreate in the correct one?
In the Create or Edit of Contacts, there should be a dropdown of all your groups and you select the group for that contact while creating or editing.

Yes, you can create groups but you can't set ringtones by group. You'd have to create the group, then set the ringtone for each contact manually.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

How can I specify which contacts group is my preferred/default for my iPhone?

Similar situation as others I've seen...
My wife and I share an iTunes account. We also use that account for our iCloud account. We want to share our calendar(s) with each other. We enjoy having access to the number of contact groups we've put together over the years.
I want to be able to designate one of the contact groups as my default reference for my iPhone so that when I recieve messages and calls they are recognized by the identifiers in my phone's contacts list (not as if they are my wife's contacts). Sure, we could set up multiple iCloud accounts... We feel we shouldn't have to, besides, that wouldn't allow us to share our calenders and contacts anymore. It seems to my that the most "Apple" way of fixing this would be to have a "Settings" option in the "Mail, Contacts, Calendars" - particularly in the "Contacts" grouping to have a "Primary Contacts Group" (if more than one is detected) option to choose from.
Is this something that can be done or do I need to submit this as a requested future feature to something like the Apple Bug Reporter?
Thanks all!
ツ

Is there a way to specify which network card (IP
address) that the jvm will use as default? (Whenever
opening a connection such as URL.openConnection,
sockets without specifying the local address etc.)No there isn't, but if you are only talking about outbound connections and the network cards are on distinct subnets, unicast routing will ensure that the most appropriate outbound NIC is used for the target IP address, so configure your firewall accordingly.

Changing Ringtones on Multiple Contacts - Nokia 58...

I created a group in my contacts and selected a few contacts and placed them in the group. Then I change the group's ringtone. However this did not change the ringtones of each contact. This was not what I expected.
Could anyone explain why and how I might be able to change several contact ringtones at the same time?
Thanks.
M.

If your group is not that large, try deleting the group and redoing it.
What else could be going on is that you have a contact in a group but also have it assigned a personal ringtone in the Contact details. I believe that the ringtone in the Contacts will override the ringtone in the group.
Also, check and make sure that one contact is not in several groups.

Routing according to Organizational groups

Hi all,
In the current process which I am building, I have just one role. The role has just three activities.
But the routing is based on groups and sub-groups and on call type and sub call type. For example:-
If role is Support Center
If groups are Lan Services, Database Admin, Network Services.
If sub groups are Lan Services - Data, Network Services- Data, Network Services - Voice.
And if the call type and sub-call type is Connectivity and Access VPN respectively, then I should be able to route to the sub group Network Services-Data.
Can this be done using Organizational Groups and having only one role defined?
All groups and sub-groups perform the same task.
Can this be done?

No Sujay, please read my question again - I've not assigned any ringtone directly to the contact.
I have a contact that is a member of TWO groups. each of the groups have been assigned a different ringtone. ...... So which ringtine will be played when that contact calls in?
Or are you saying that both the ringtones for the 2 groups will be IGNORED and instead the default ringtone will be played?
There ought to be laws out there on the use of the term 'smartphone'

Restore contact groups from time machine

We have had enormous problems restoring contacts from a TIme Machine backup. Does anyone know how to do this so that it works?
1. All contact data disappeared. We still don't know why
2. Opening the contacts program and then opening Time Machine allowed me to restore all contacts but not the contact groups
3. Resptoring Username/Library/ Appication Support/ Address Book failed repeatedly because OSX kept recreating the Address Book folder with Configuration.plist in it before the restore took place. This obstructed the restore process
4. After checking the user groups we turned off iCloud. OSX still kept on recreating Configuration.plist making it impossible to complete the estore from TIme Machine
5. The process that worked (below) is very messy and demands a very quick hand. Please can someone tell me that there is a better and more foolproof method than this:
5.1 Disconnect Contacts from iCloud and Shut the Contacts Application
5.2 Delete Username/Library/Application Support/Address Book
5.3 Restore the Address Book folder from Time machine to a different location
5.4 Rename the restored Address Book folder to "Address Book 2"
5.5 Move Address Book 2 into the Application support folder
5.6 Select Address Book - you've just deleted it but OSX will have put it back. Press Get Info
5.7 Select Address Book 2 (the one you have restored from Time Machine) and press Get Info
5.8 Quickly before OSX has time to think using the two Get Info windows rename Address Book to Address Book Old and IMMEDIATEY rename Address Book 2 to Address Book
5.9 If you are lucky / fast enough the restored Address Book will now be there when you open Contacts
6. I have not yet checked to see what happens when we reconnect to iCloud. According to another user group post we may have to
6.1 Export the (now correctly restored) Address book
6.2 reconnect to iCloud
6.3 Delete all the contacts
6.4 Reimport the exported address book
Please someone tell me there is a better way than this. When it works Time Machine is marvellous. But this isn't how it is meant to be
Many thanks
Julian

With Mail in the foreground and the browser window showing, enter Time Machine. Scroll back to a snapshot that contains the messages you want to restore. Select them, then click the Restore button in the lower right corner of the screen.

New 4s. Adjusted all ringtones by contact and now they are all showing as "multiple ringtones" for each contact. Help!

I set up my new iphone 4s and assigned ringtones to my contacts on my phone. A day later each contact showed "multiple ringtones". How do I keep that from happening? I did not physically sync my phone and am set up on icloud to sync. thx.

I had this problem due to Linked contact cards so that each contact was composed of more than one entry. Apparently the Contacts list can get corupted and have more entries than you think. I found the answer in the Linked /Unknown discussion on this community. My reply that I poste dthere fixed the problem.
This is what I wrote:
================================================
I had a problem where I could not get the assigned ringtone to ring correctly. Tried removing and restoring the contacts from MobileMe several times and resetting sync to copy the computer contacts to replace the MobileMe contact. Still no luck. Then I looked at the All Contacts number and it was larger than the total number in my Contacts list on the computer. So there were extras I couldn't see. When I turned off the MobileMe Contacts, some where still left anyway.
I then tried to cleanup the list by looking for hidden contacts. I tried the contacts "cleaner app" I had, called Group, which removes duplicates, but it did not find anything. Then I tried your recommended Cleanup app (seach in App Store for Cleanup), and, lo and behold, it found a lot of contacts that should not have been there still. Cleanup removed them all, leaving the list squeaky clean.
Then I turned on MobileMe Contacts again, and after the Contacts list populated, the number agreed with the number on my computer. And the switching of assigned ringtones now works correctly.
So, I basically did what you recommended, but since I am not using iCloud to sync, since I haven't switched to Lion, I did the same thing using MobileMe.
============================

Does PC suite sync contact groups?

Hi all,
Got the 6230i phone, and I use the Nokia PC suite to sync it with the PC. Now recently when my phone broke down and then replaced by a similar one, I've notice that my contact groups weren't backed up, and I had to enter them again manually. So checked PC suite, and saw it wasn't aware of contact groups at all, although according to its help, contact groups were supposed to be supported. Can anyone help with this?
Thanks,
David.

> - First, unlike what you say, my contact groups weren't safe. As I explained in my original message, contact groups weren't restored to the replaced phone I had got.
You can check if the contact group is correctly backuped using Noki. The problem you mentioned is usually occurred between S40 and S60 phones. They store contact group differently - S40 stores in a separate section and S60 stores contact group together with contact database (in the contacts.cdb file). These two format doesn't recognize each other very well.
What's the law of the jungle?

Delelet about 2000 contact groups with same starting sequence for name

Hi,
I have about 2000 contact GROUPS, which I need to delete. All groups start with _ModGrp and were created by a Deutsche Telekom app (according to the groups names) on my iphone and syncronized to all my devices. I´ve reported this app to apple a while back and the bug got fixed, however I still have all those groups.
Any and all help would be greatly appreciated.

All recently created Group Chats will be Cloud based group chats. It doesn't matter whether a group is created using Skype 6.21 or 7.0 version. Obviously, all groups created using 7.0 are cloud based, because the 7.0 version was not yet available when P2P groups could still be created.
Groups created in the past using 6.21 version might still be P2P type but they can be accessed by the 7.0 version too.
However, groups created on one Skype device are not automatically added to Contact List on Skype clients installed on other devices.
As pointed out by Capreolus, the group created using 6.21 should appear in the Recent tab whenever some one sends a new message to this group, and from there it can be added to the Contact List. At least in theory, this should work. The "real life" might be unpredictable.

Contacts Groups Nokia X2DS

how i can create contacts groups for easily conveying text messages ...

Hello!
From which backup did you restore that?
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

Syncing to selected contact group wants to delete files outside of it

Hello -
I am trying to sync my iPhone contacts to my address book in a specific way. In my address book, I have my personal contacts - friends and family. I also have mailing list subscribers (which gets into the 1,000s - people with whom I am not personally connected). I copied all of my personal contacts into a separate group and selected that group under the iPhone sync options in iTunes. I also checked the box marked "add contacts created outside of groups in this iPhone to" and again chose the special "personal contacts only" group.
However, when I go to actually sync, I get a pop-up box saying that so many contacts will be added (to my laptop), so many contacts will be modified, and so many contacts will be deleted. Which ones are getting deleted? All the ones that are not on my phone, so basically all of my mailing list, non-personal contacts.
Isn't the point of syncing specific contact groups so that you can have your phone dialogue with that particular folder and nothing else - leaving anything outside of that folder alone?
Just to test it out though, I changed the sync setting to "all contacts" to see what would happen, and I get the same message (it's basically going to delete anything that's on my laptop, but not currently on my phone). Why does this happen? Isn't the whole idea of synchronization that the two devices end up having the same file lists? How can I get the iPhone to populate any contacts I added on it to a specific group on my laptop, and vice versa. Seems like they should populate each others lists with missing pieces, rather than one taking the other one over and deleting, well, anything (unless I tell it to).
And no, I do not have any of the advanced overwrite functions enabled.
Does anybody have a solution to this problem? I'd like to sync my contacts, but obviously don't need 2,000 names of people I don't personally know taking up space on my phone.
Thanks for any advice you all can provide!

I think MobileMe is all or nothing--I asked a chat agent a few months back, and that was the case, haven't seen any reports or UI changes.
Send them feedback--it would be great to select Groups and Calendars.
http://www.apple.com/feedback/mobileme.html

How do I delete a contact group from my iphone

How do I delete a contact group from my iphone?

Download Easy Group. It is totally free. Lauch it. Click on Edit. Click on red-cross next to your unwanted group. That's all. http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
Rémi
Note: As I am Easy Group developper, I may receive some form of compensation, financial or otherwise,from my recommendation or link.

Custom Ringtone for your Contacts on Nokia N900

Hey guys,
Its great to know that We got Nokia N900 in India now.
Many of people searching for custom ringtone for their contacts. I have installed app for it and worked great, here is the screen of how to do it.
1-goto app manager and download Ringtino app ( name specified in attached screen )
2-goto contact and click on title not edit contact, u will get " custom Ringtone " as like my screen.
Let me know if anything needed.
my other post
/t5/Maemo-Devices/Nokia-N900-works-in-India/m-p/658528#M7963
Rasu
Pallipalayam
Attachments:
Screenshot-20100719-110252.png ‏50 KB
Screenshot-20100719-111207.png ‏79 KB
Screenshot-20100719-111256.png ‏56 KB

works great now. you should be fine.
@elie
nice new avatar...

Not all emails are showing up when using a contact group

Hi,
I haven't seen a similar question posted to the forum, so hopefully someone can help me.
I have a MBP running Mavericks 10.9.5 and I'm trying to create a contact group to expedite emails. I've created the group in my mac's contact app, however when I select the group to email (regardless of if I select "send email to..." in contacts or do a search for the group directly in the To: line of the email) only 2 of the 6 contacts in the group show up.
Some troubleshooting I've already tried: adding the same group to all the accounts in the contacts app (i.e. iCloud, On My Mac and my personal email account); verifying there's only one email address shown in each of the individual contact cards; switching all the email address labels from "email" to "home" in each contact person's card; and the classic restart.
It's always the same 2 contacts of the 6 that show up, so I'm assuming there must be something those two have the the others don't. I appreciate any ideas on what else to try.
Thanks!

Thanks. I had the first row colored as a header but it wasn't defined as a header. As soon as I did that within Numbers the table appeared.

PO Change according to material group and G/L Account no.

Hi Expert,
I have a requirement of "PO Change according to material group and G/L Account no.". I am using BAPI_PO_CHANGE.
But it is giving error.
"I 06 684 Releases already effected are liable to be reset
E BA 003 Instance 4500010532 of object type PurchaseOrder could not be changed
E ME 046 Purchase order item 00010 still contains faulty account assignments
W ME 039 Goods receipt posted unvaluated due to multiple account assignment
E ME 083 Enter G/L account no."
Can any body tell me how to fill this BAPI.......
Even i am trying to debug standard tocde of PO but it is not calling bapi BAPI_PO_CHANGE.
Could you please help me on this.
Regards
Sanjay Kumar

Hello,
To assign material group to G/l account you have to matain valuation class for Material group
SPRO >> Materials Managment >> Purchasing >> Material Master >> Entry aids for items with out material master.
Assign this valaution class to G/l in OBYC.
Regards,
Shailesh

E72 :: Ringtones according to Contact Groups

Similar Messages

Maybe you are looking for