E72: Swedish and other special characters not work...

When I send mail through MfE, swedish and other special characters do not reach the recipient, they are just ignored. No blanks or nothing. Every word with a swedish character ends up one letter short.
Before the firmware upgrade this was intermittent, happening only on about half of my mails.
Now I upgraded yesterday, and it seems the problem is now permanent.
Have seen similar posts from E75 and E90 owners, their problems seem to have been fixed by newer firmware.
Our setup is: Exchange 2003, Portwise authentication.
All other phone models work fine, like iPhone, E71 etc.
/Sebastian

After some testing I found out that if I use swedish chars in the subject line, it works fine. Even in the mail body.
If I don't use swedish chars in the subject, they won't work in the body. I either get garbage or nothing where the swedish chars should be.
The problem doesn't exist at all in my private IMAP mail account.
Could someone who uses Mail for Exchange and have special chars in their alphabet (swedish, finnish, german, hungarian etc) pls tell me how it's working out for you?
Message Edited by Seb_Martin on 28-Jan-2010 11:15 AM

Similar Messages

10g won't recognize ellipsis and other special characters.

I'm trying to insert data into both VARCHAR2 and CLOB columns that contains characters such as ellipsis and other special characters. Oracle doesn't recognize the characters and just converts it to garbage. Is there a way to make Oracle easily recognize these characters?
For example, it won't recognize the following ellipsis in the string:
"Here we are … right now."

My bad...I did look at the national character set instead.
When I performed theq query you posted, I got the following:
NLS_CHARACTERSET
WE8MSWIN1252
NLS_NCHAR_CHARACTERSET
AL16UTF16
I hope this new information helps. Also, the tool involved is SQL *Plus, but I'm currently concentrated on getting the insert to work via JDBC. Thanks in advance.

Capturing returns and other special characters

Greetings,
I'm curious to know what is 'normally' done to capture
returns and other special characters from textareas. I want my user
to be able to insert 'control' characters into the text area to
allow them to provide some structure to the information they're
entering. At the moment, I'm processing the text char by char and
working out if it's an 'enter' or whatever, then appending a
'<br />' to the string before I store it and so on.
Is there a more established way to do this sort of
thing?

Use the replace function to replace either chr(10) or chr(13)
with a break tag. It's using cold fusion functions to accomplish
the same thing you appear to be doing manually.

Facebook, hotmail and other sites are not working on safari?

Facebook, hotmail and other sites are not working on safari. i have tried everything. downloaded google chrome still didn't work. downloaded firefox, still didnt work. tried to update my computer but at the end it always says an error occurs. and i cant find a download for mac os x anywhere.. someone help?

If you look at the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. It appears you are not the only two having this problem.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

IPhoto and other iLife Apps not working

About a month ago I was having serious problems with my iMac. Ended up needing a new hard drive, so Apple sent it away, put in a new hard drive, and sent it back. I've had it for two weeks and am just now using some applications (probably should have checked everything when I got it back, oh well), and some iLife stuff and programs that come installed are not opening. I am running Mac OS X 10.4.11 FYI
What works: Mail, Safari, iChat, Address Book, Itunes, iMovie, iCal, Quicktime
What doesn't work: iPhoto, iDVD, Garageband, iWeb, Photo Booth
Just a note, iWeb is the only one that prompts me and tells me that I need to re-install iLife. When I went to download latest iLife update it told me there was nothing to update and I needed to reinstall iLife.
Also just went into the applications folder again and realized I have both Spaces and Time Machine installed, except they do not work with my OS, so I don't know why they are on there (when I try opening them just to see what would happen it says "does not work with your OS X). Also, Senuti and iPodRip also are not working, so anyone have any ideas as to programs that would let me get my music off my ipod and back on to the computer?
The programs that don't work just bounce out of dock once then go back down immediately, and do not open at all. I tried installing the software bundle package from my OS X install disk but while the install was seemingly successful it did not change anything. So AAGGHH what do I do???
Thanks in advance!

I have the Core 2 Duo in the white case, released late 2006. Definitely have been running Tiger on it (just checked and I am running 10.4.11), sent it away, got it back, and just noticed that these programs don't work and I have programs native to Leopard inexplicably on the computer for some reason. I don't really want to remove them though cause I would like to have them on in case I have to go to the Apple Store so I can point it out to them and ask some questions about why Tiger (the OS installed on the computer) applications are not working while Leopard applications are installed even though they don't work and shouldn't be on there.

Storing carriage return and other special characters in a TestStand variable and passing to LabVIEW

I am using TestStand step to call a LabVIEW VI that writes commands to a serial device. The device expects a carriage return at the end of the command. I can create a constant string in TestStand with the carriage return, e.g., "ATA\x0D" and pass that to a LabVIEW string control which shows ATA\r and the VI works properly.
To provide consistency and flexibility in my code, I want to store the terminator character(s) in a TestStand variable. However, when I try to use an expression to create the command string, i.e. "ATA" + "Locals.Terminator", where Locals.Terminator is set to "\x0D", my LabVIEW VI string control shows "ATA\\x0D" which doesn't work. And when I try Locals.Terminator set to "\r", the LabVIEW string control shows "ATA\\r" which doesn't work either.
Is there a way to store special characters in a TestStand variable and pass them to LabVIEW as special characters? I saw in another post that if you edit the TestStand variable by pressing Cntl-Enter, it will store the newline \n properly and it can be sent to LabVIEW - that works for me as well for \n. But I need to send a carriage return.
I've attached my test sequence and the corresponding LabVIEW VI with a string control.
Hans
Attachments:
Special Chars.seq ‏27 KB
String Passing.vi ‏13 KB

Hi Hans,
Thanks for your detailed explanation and examples. In TestStand, change the String parameter's String Type to Binary String instead of ASCII. Then it will pass the desired value.
Cheers,
David Goldberg
National Instruments
Software R&D

Cut and Paste and other things do not work in 1.3.1_01 or higher.

I develop a tool that uses an Swing based, applet UI that is compiled using JDK1.1.8 and is distributed to our customers. To enable cut and paste we have the customer choose to trust the applet and in JRE and Plug-In level 1.3.1 everything worked fine. We are now getting several differet problems, including cut and paste not working and URLs that nolonger resolve properly, when customers try to use 1.3.1_01 or higher.

cut and paste in JTextComponents requires signed Applets... (no problems with console Java applications)
a alternate solution is to use the old TextArea instead of a JTextArea
http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html

LAMBDA and other SPECIAL CHARACTERS

Hello,
Does someone know how to put in a lambda character? I have Framemaker 7.0 and the document I'm working on is non-structured. OS is Win XP Pro. All help and suggestions are greatly appreciated!!!

Hi Bear,
You could also try using the Equations pallete to insert the lambda symbol in para text. Here are the steps you could try:
1. Place the cursor where you want to insert the character.
2. Select Special > Equations
3. From the Equations drop-down list, select New Small eqaution. An Eq frame is added with a ? mark.
4. Click the lambda symbol from the buttons in the Equations palette. ? is replaced by the lambda symbol.
5. Shrinkwrap the equation shortcut Esc m p.
This should insert just the lambda character inline with the para text.
Hope this helps.

Preview, iPhoto and other Apple apps not working

I upgraded to Lion. My Time Machine backup disk saved me. Lion has been fraught with issues from the beginning of my experience with it. Why even release it? If this level of inconvenience and disruption was even remotely foreseeable, more tutorials should precede such an important, far-reaching software upgrade. How disappointing and how much more agravation is in store? I hope not much

I have the Core 2 Duo in the white case, released late 2006. Definitely have been running Tiger on it (just checked and I am running 10.4.11), sent it away, got it back, and just noticed that these programs don't work and I have programs native to Leopard inexplicably on the computer for some reason. I don't really want to remove them though cause I would like to have them on in case I have to go to the Apple Store so I can point it out to them and ask some questions about why Tiger (the OS installed on the computer) applications are not working while Leopard applications are installed even though they don't work and shouldn't be on there.

Headphone and other audio jacks not working on msi GT 70

I was wondering if anyone could tell me why the headphone jack isn't working properly on my new laptop. When I plug them in it only works in one ear and the onboard speakers still play. Also nothing pops up from realtek when I plug them in. I have already tried uninstalling and reinstalling the newest version of realtek.
I have been having a heck of a time with the graphics cards. It will not default to the Nvidia GTX 670MX when I am in a program such as adobe premiere pro or photoshop. I went into Nvidia and changed the certain programs that I wanted to run the Nvidia card - still wont run off of it. I changed the global setting to Nvidia - still nothing. Finally I just disabled the intel driver in the device manager. It works fine now except exported video is very glitchy on the players. It plays the videos fine when I enable the intel driver again.
I guess I can live with the graphics card problems, but can't live without the headphones working. Any help is greatly appreciated
Thanks

be sure everybody has same problem https://forum-en.msi.com/index.php?topic=180629.0 or https://forum-en.msi.com/index.php?topic=180690.0 I found a way if you had new nvidia driver delete nvidia sound driver after delete your msi sound driver after reboot , install your msi sound driver it will be normal but if not try first msi driver after nvidia with beta or new sound driver if still not use realtek new drivers but dont forget delete nvidia sound driver , but you should always repeat it , msi couldnt fix this problem just offer to use old driver and old nvidia driver

Facelets: Issue with and other special characters

We are trying to use facelets for our JSF based project. If we use in the included jsf pages these are not rendered properly in the resultant page. The resulting page eats all the
layout file:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:ui="http://java.sun.com/jsf/facelets"
<f:loadBundle basename="bundle.MessageBundle" var="res" />
<head>
<title>
<ui:insert name="title">Foo</ui:insert>
</title>
<sm:html-base target="_top" />
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<link href="styles/default.css" rel="stylesheet" type="text/css" />
<script language="javascript" type="text/javascript" src="scripts/main.js" />
</head>
<frameset rows="80,*,22" cols="*" framespacing="0" frameborder="no" border="0">
<ui:insert name="header">
<frame name="header" src="common/header.jsf" scrolling="no" noresize="yes" />
</ui:insert>
<frameset rows="*" cols="187,*" framespacing="0" frameborder="no" border="0">
<frame name="navigation" src="tree/tree.jsf" scrolling="auto" />
<ui:insert name="content">
<frame name="content" src="" scrolling="yes" />
</ui:insert>
</frameset>
<ui:insert name="footer">
<frame name="footer" src="common/footer.jsp" scrolling="no" noresize="yes" />
</ui:insert>
</frameset>
<noframes>
This browser does not support frames
</noframes>
</html>
~
In header.jsf
<td align="right" valign="middle" nowrap="yes">Start <img src="images/seperatorGrey.gif"/> Tools <img src="images/seperatorGrey.gif"/> Support <img src="images/seperatorGrey.gif"/> Logoff </td>

Thank you both for replies ....
Since these urls are generated through code, what is the best way to go about it ?
Could you please explain a little about using of hash map in this case?
and excpet using escape characters, is there any other way to do it ?
Thanks again

Garage Band and other Plug-Ins not Working

My Garage band isn't working. When I click on it the icon just bounces continually and never does anything. It was working fine yesterday. I also have a couple plug-ins, KORG M1 and Wavestation, that I use with Garage band and they are doing the exact same thing. Why am I having these issues??

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

[SOLVED]Special characters not working on terminal

Hi everybody, my problem here is that when i log in from tty i can see characters like áéíóúñ and so, but when i start a terminal in E17, i can't see them. I just see diamonds with ? or just the ?.
Here's my output of locale and locale -a
Yes, Master earth? >
locale
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME=es_US
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
locale -a
C
en_US
en_US.iso88591
en_US.utf8
es_SV
es_SV.iso88591
es_SV.utf8
POSIX
PD: I use Sakura as my main terminal, but also UXterm and Xterm
Any ideas?
thanks!
TheEdward
Last edited by TheEdwardRCT (2012-12-19 23:44:48)

Oh I see, you don't use setfont to set an X terminal's font.
Edit: I realized that answer was a bit sparse. It depends on the terminal in how you set the font. But you should know that the fonts that X uses are not the same as teh fonts that the console/tty use. There are a number of wiki pages dedicated to fonts (inluding one appropriately titled "Fonts"). When in doubt, use the wiki. If that fails, come ask here.
Last edited by WonderWoofy (2012-12-18 05:23:01)

Close Tags and other code hints not working after installing Dreamweaver 2014

I'm working on a windows machine. All the code hinting features where working on previous installations, but they're not on 2014. I'm not sure if it's a bug or something was changed and I have to turn the features on somewhere other than the Code Hints settings?

Try re-starting CC2014.
Nancy O.

Skype and Other VOIP services not working on my N...

Hi,
I got a new Nokia Lumia Icon with Verizon Wireless contract. I installed skype and when trying to make International Voice calls, all I see the blue backgroud with Skype call outgoing icon and then nothing happens. Sometimes, the call gets active as in it shows the seconds counter of the call,but nobody can here anything on either side of the call. I do have some credit balance in my Skype account.
I tried re-installing the app but to no avail.
I tried with both Wifi and Mobile data
Also, I installed Nimbuzz- a VOIP service and when tried to make calls, it behaved similar to above.
Previously, I had an Android device and when I tried to make same International mobile calls now in it, I am able to connect and talk without any issues. I also chatted with an Skype support team and they also couldn't help much. They said that I am reporting such type of issue for first time and told that one of their tech specialist will get in touch with me once they have completely assessed the issue. I haven't gt any response though.
Is anyone else facing issues with VOIP apps in Lumia Icon?
Also, are there any fix for these issues?
Thanks

Thanks for posting your concern, Win_Phone. Do you have a stable internet connection when trying to make a call? Have you tried accessing any website using the phone's browser to verify the stability of the connection? Have you also tried connecting to another available Wi-Fi network to check if there's any difference? About the audio, does it happen as well if there's a headphone connected to your phone? BTW, do you also have an issue when you are not using the Skype app?
We'll wait for your response so we can help you further.

E72: Swedish and other special characters not work...

Similar Messages

Maybe you are looking for