E72, tailored for speed?

Anybody have tried tweaking e72 for speed modifying the rom files?
I hardly need apps like World Traveler, etc.. that consume a lot of resources of the handset, let alone nagging on start-up. But it's not just that. Taking into consideration that the only way to upgrade here is to buy a new phone. I would like to know if there are any tweaks and / or general tips to improve the general responsiveness of the phone. I just did a hard reset and it seems to be a step in the right direction, but then again... come a week or two and it will probably get slow again. Where is the swap file stored here? What data other than user files can be used for on the phone memory?
Any help would be greatly appreciated.Thanks.

Thank you for the valuable feedback:
To investigate this could you provide the following info:
E72 software version and language set (dial *#0000#)?
Email version, to get it select Menu > Email > Options > About?
Product code of E72, it is written on the White Label on the device, under the battery, CODE: ?
What is the Exchange version : 2003, 2007, 2010, any service packs?
Do you have a lot of emails in the inbox?
Do you sync the sent and other folders with the device?
Are you using a 2G, 3G or WiFi connection to sync the emails?

Similar Messages

MSI ti 4200 128 MB and Problems with "Need for Speed: HighStakes"

Does any one know of a fix for "Need for Speed: HighStakes" with the new 45.32 drivers. When trying to start this game it won't even load, the screen goes dark for a second and then falls back to the desktop. Did the same thing with 43.45, but if I install the drivers that came with the Video card ( I think they were 31.XX) then the game works fine. Haven't come across any other games that won't run except this one, some examples that work fine are UT 2003, C&C: Generals, Warcraft 3, Hot Pursuit 2.
System:
XP pro OS (sevice pack 1) DirectX 9
Athlon 1800
512 MB RAM
MSI nforce 2 Main board
MSI GeForce 4 4200 ti 128 MB 8X AGP
Thanks for any info.

well I "bugged" the game makers (EA) and the response is that the game doesn't suport Windows XP. Strange that the older nVidia 31.xx drivers work fine with the game. Also played it on my last machine which had XP and a ATI radeon video card. OH well who ever said Direct X was supposed to be backward compatible.
Too bad the older drivers don't work so well with the newer games.

How to Optimize SCXI 1600 for speed with Thermocouples

I'm working on a data acquisition system for my engineering firm and I'm trying to find a way to use our new thermocouple system as fast as possible.
The requirements for the DAQ process are:
Read 32 voltage channels from a PCI-6071E card
Read 32 thermocouple channels from a SCXI-1600 with an 1102C accessory
Complete the entire operation in under 5ms (this is so other parts of the program can respond to the incoming data quickly and trigger safety protocols if necessary)
Using LabVIEW 7.1 and MAX 4.4, I've got the voltage channels working to my satisfaction (with traditional DAQ VIs) and the rep rates I measure when I run the program are around 1ms (I do this by putting the DAQ code in a loop and reading the millisecond timer every time through that loop, then calculating the average time between loop executions). I have been trying to get similar performance from the thermocouple channels using DAQ Assistant and DAQmx. Some of the problems I've encountered are:
Very slow rep rates with 1-sample and N-sample acquisition modes (300-500ms)
Good rep rates when I switch to continuous mode, but then I get buffer overflow error -200279.
When I attempted to correct that error by setting the DAQmx buffer to overwrite unread data and only read the most recent sample, the calculated sample rate went to 20ms. It was around 8ms when I left the error unhandled and continued acquisition.
At this point I'm out of ideas and am just looking for something to try and optimize the DAQ process for speed, as much as is possible.
Thank you for any help.

I guess I would be interested in checking out your code to see if there is anything I can recommend on changing. However, I do have a few general Ideas of how to improve your performance. These recommendations are purely based on what you could be doing to slow down the speed of the program because I am not sure how exactly you have everything set up.
-Are you setting up the task and closing the task each time that you read from your daq card?  the way to get around this is to only have the DAQmx read vi in the while loop so you do not have time alloted for opening and closing the task each time.
-Try using a Producer/Consumer architecture. This architecture uses queues and splits the aquisition with the post processing.  Here is a link to how to set up this architecture and some information on when to use it.
Application Design Patterns: Producer/Consumer
http://zone.ni.com/devzone/cda/tut/p/id/3023
Message Edited by Jordan F on 02-06-2009 04:35 PM
Regards,
Jordan F
National Instruments

Best practice for speeding up animation...

Hi,
What would be best practice for speeding up an animation? - Increase the frame rate, or is that considered cheating (already set to 25)?
The alternative would be to manually adjust the length of the tweens on each layer.
~ Let me know what you'd do.
Thanks!

Keep the frame rate as low as possible to create acceptable smooth tween and adjust the length (amount of frames) of the tween on the timeline. By keeping frame rate low you are reducing the amount of code execution per unit time (i.e. 24 FPS or 0.04167 seconds per frame)

I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

But how do you install the drivers if Bootcamp is running interference?
Bottom line, I'ev tried to install three different versions of updated ATI driver sover the last few momnths and on each and every occassion have ended up with the original Bootcamp driver. A number of current games are unplayable on a Mac running Bootcamp as a result.
And if I can't run the software I want, then Bootcamp is as useless as boobs on a bull.

Live for speed (racing sim) vs bt's packet shaping

For the past 1/2 a year I've been getting more and more annoyed at bt broadband. Now I understand that they have to packet shape because its their fair usage policy but now its started affecting this game, live for speed. Its a online racing simulator that becomes impossible to play (constantly unable to find server / excessive lag / disconnecting) until it becomes 00:00 and it suddenly plays fine again. The odd thing is that I play counterstrike: source and Team fortress 2 and they have no problems with packet shaping what so ever.
I thought bt was supposed to have gaming ports as high priority or something like that? Anyway, Live for speed uses different ports, depending on which server your connected to:
Master Port 8080
Server IP 192.168.0.107
Server Name (IHR)IRONHORSE RACING
Server Port 8888
Game Port 63392
The master port and game port stay the same, where as the server port changes. So if anyone can help, I will be very grateful!
Many Thanks
Ryan

Anything with 192.168.x.x is a local address on your own router, not elsewhere on the internet, usually.
You would be better off asking the question on LFS to be honest.

PL/SQL: Optimize for speed

I've got a very simple function that i need
use to order the result of a SELECT.
I takes two parameters. One is the current code (that keeps changing with the values of
the SELECT), and the other does not
change.
I'm using Oracle 8.1.5 under Linux and i'd
like to optimize this for speed.
Any suggestions?
Thanks a lot!
FUNCTION OrdenarNomenclator2 (CurrentCode in varchar2, CodeToFind in varchar2) return number IS
BEGIN
IF CurrentCode LIKE CodeToFind| |'%' then
IF CurrentCode = CodeToFind then
return 20;
ELSE
return 10;
END IF;
ELSE
return 0;
END IF;
END;

Ferran,
There is an overhead in calling stored functions. Try this as an expression in your select:
decode(CurrentCode ,CodeToFind,20,decode(substr(CurrentCode ,1,length(CodeToFind)),CodeToFind,10,0))
which seems quite fast.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Ferran Foz ([email protected]):
I've got a very simple function that i need
use to order the result of a SELECT.
I takes two parameters. One is the current code (that keeps changing with the values of
the SELECT), and the other does not
change.
I'm using Oracle 8.1.5 under Linux and i'd
like to optimize this for speed.
Any suggestions?
Thanks a lot!
FUNCTION OrdenarNomenclator2 (CurrentCode in varchar2, CodeToFind in varchar2) return number IS
BEGIN
IF CurrentCode LIKE CodeToFind| |'%' then
IF CurrentCode = CodeToFind then
return 20;
ELSE
return 10;
END IF;
ELSE
return 0;
END IF;
END; <HR></BLOCKQUOTE>
null

Hi, I'd like to know how SAP CRM has been 'tailored' for the High Education sector? Is it basically the same product than the existing CRM or a totally different syste,? Where has it been implemented? Is there an existing document/presentation about it

Hi, I'd like to know if the SAP CRM solution for High Ed is the same product thant the existing CRM solution? Or has it been 'tailored' for High Ed? If so, how? Is there existing documentation/presentation about it? Where has it been implemented?
Thanks!
Sylvie from Montreal

Ged,
whilst generally I agree with you a question (or two) for clarification so we can be sure we're not comparing apples with oranges
I'm not familiar with O2's product lineup but given you're on Annex M is that a business package?
Are you on an Infinity residential or business package?
On the subject of the offshore support teams my experience from the other sife of the fence is that many, many of them are very technically orientated. The problem is that the ISPs they work for don't give them access to many of the tools that are needed (they need to raise internal requests to even get line checks done in some cases) and also they are very heavily scripted & monitored in what they do/say on a call.
Sounds like O2 are operating as a contact centre rather than as a call centre which is much more preferable from the customers point of view.
DISCLAIMER: although I work in the industry I do not work for BT and any opinions given are purely my own.

Optimize for Speed = LV runtime error in file CCGArrSupport2.c (LV2009 / MCB2400)

Hello,
I have a MCB2400 and LV2009 and the normal Code-Generation works fine. But if I try the Run-Time Option: "Optimize for Speed" I always get this Error:
"LV runtime error in file ...\CCGArrSupport2.c at line 2621: 6 3"
I already tried a workaround, which helped somebody for blackfin: http://forums.ni.com/ni/board/message?board.id=420&thread.id=811
But it didn´t help in my case.
bye
amin
Solved!
Go to Solution.

Hi,
you are right. In the example it was just a Problem with the output.
Now here is one little part of the project which brings the runtime error allone, which brings the runtime error (just if the optimize option ist activated).
The Black Node is a Sub-Vi.
bye & thanks
amin
Message Edited by aminat on 10-23-2009 09:02 AM
Attachments:
PUB.zip ‏15 KB

Need For Speed: Carbon & Intel iMac 2.8 GHz

Hello All,
I just bought *Need For Speed: Carbon*. I thought I met the requirements, but some other forumes discuss the ATI card may not be enough for the game. The game gives me the error "Cannot locate the DVD-ROM", although it is clearly inserted. I followed the instructions exactly, installed it onto my iMac, and then typed in the CD Key provided on the booklet.
*My Apple iMac* from 2007 has 2.8 GHz, Intel Core 2 Duo, with 2GB DDR2 SDRAM. 800MHz Bus Speed and L2 cache of 4 MB. I am using an _ATI Radeon HD2600_ graphics card. I am running Mac OSX 10.5.7.
*Need For Speed: Carbon's* requirements for the game are Mac OSX 10.4.9 or higher, 1.83 GHz Intel Core 2 Duo or faster, 512 MB RAM or more, 8x or faster DVD-ROM drive, 5.3 GB or more free space on HDD, and finally video cards Nvidia (7300 or better), *ATI (X1600 or better)* +Note: GMA950 integrated graphics adapter is not supported.+
Help!? I have all the required specifications. I don't understand why it isn't accepting the program and not booting at user prompt. Thanks in advance.
Message was edited by: mojolevy (Morris Levy).

EA has some information on this problem here. If that doesn't help, you may want to take this up on EA's own forums.
Good luck.

Quick Tips For Speed Your Digital Publishing WorkFlow

I think that we have a great problem with our Digital Publishing Workflow's speed . I talk about, for example, of set up State Objets Sliedshows for multiple page, and I mean, there are another similar examples about that. Do you know if does exist more tips for speed our workflow in InDesign for Digital Publishing Output?
Thanks a lot!
Sorry for my bad english.
Bye!
Marco Toscano

Muito abrigado my friend! Seriously thanks a million, but I was curious to know about my situation regarding replacing my first shot multiple times... In another words there's a clip already in the storyline which won't allow me to replace edit since it just moves out of the way. Would you just go back into the browser and add the original selection to the first clip? Because I kept having to move my connected music and solid I just gave up and would wait until the end to add the music and solid (I add the solid to give the background a different color when I want to create the letterbox effect).
I just watched a music video tutorial where someone created a 3 minute solid, made like a hundred cuts with the blade tool and manually dragged each clip from his browser to replace from start for each of those cuts in the solid...
What is your workflow for music-based edits? Do you place the song in the primary story line and use the video as connected clips? Do you use a solid or gap clip and dissect it with cuts and replace the segments with clips? I really hate not being able to add markers to the timeline and must make those marks on a clip/generator/music track of some kind. Also if you have a project that has the same settings with fps, crop size, solid as a background is there a way to make template so I don't have to do that each and every time?
Thanks again my friend!!!
Anthony

Will playing excessive need for speed games on my macbook pro damage the arrow keys(i play using them) ??

hey guyz i wanted to ask whether playing excessive (1-2 hours daily) need for speed carbon on my macbook pro using the arrow keys to control the car damage the arrow keys of the MBP??
pls answer asap i am worried..

I don't think that you have to worry about arrow keys because they won't damage with their use (unless you hit heavily these keys). Using games, there are other things to worry, as the temperature of the Mac, but fans will turn on automatically when your Mac needs

I can't adjust to wide screen mode in Need For Speed: Carbon

Dear guys,
I can't adjust the graphic to Wide Screen Mode in EA game "Need For Speed: Carbon", I had tried to adjust the dpi in "Options", but it seems no wide screen mode there!
Is that normal? Thank you guys!
-DANIEL

The '''''Yahoo! Toolbar''''' and the '''''Babylon''''' extension have been reported to cause that problem. They seem to invisibly extend downward over the top of the web page display area. Disable or uninstall those add-ons.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
*See --> https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Missing icons for Tetris and Need for Speed

Hello,
I've had a good look around the forums but cannot find an answer to my problem.
According to "My World", I have installed both "Need for Speed" and "Tetris". However, no icons for these appear on the Playbook.
My home screen currently consists of two pages. These icons do not appear on either page. I have checked carefully.
I have checked inside the BlackBerry Bridge folder, just in case.
I have uninstalled and reinstalled Tetris and still no luck.
I have reset the PlayBook (held down the power, and volume buttons for 10 seconds).
I have checked inside File Manager, Pictures, Music.
I am based in the UK, is it possible the app is not available to people in the UK?
Thanks for any advice!
Tom

Yeah. With the help of someone smarter than me in the office I now have the answer. And in case you miss this too - my icons for both Need for Speed and Tetris were not in the panel to the right. Instead, they were on the default panel but I had to swipe UP. I did not know that icons could be hidden there.
So I'm not feeling like the sharpest tool in the shed but in my defense the PlayBook offers no cues that there are any icons off the screen below (or above) in the same way that it does to the left or the right.

Image Moment - Optimizing Code for Speed

Hello
I'm want to find the moment of inertia of an 2d-array. The array is converted from an image using "IMAQ ImageToArray".
The algorithm I'm using is discribed here:
Wikipedia - Image Moments
I need to calculate this formula with different values for i and j:
i.j = 0.0 - 0.1 - 1.0 - 1.1 - 0.2 - 2.0
I programmed the code shown above/attached VI, but I need the optimize it for speed.
The 2d array can be any size with a maximum of 2048 x 2048 with values varying between 0 and 4095.
My question:
How can I make this code faster?
Thank you and kudos will be given!
The Enrichment Center is required to remind you that you will be baked, and then there will be cake.
Solved!
Go to Solution.
Attachments:
Image Moment.vi ‏19 KB

Hello falkpl,
" If you are looking at moments, the IMAQ particle analysis will do moments on particles all in imaq to avoide the slower image to array.
As for optomizing your code a few observations
1. why are you using doubles- your image is 12 (actually 16bit in imaq)
2. do nor calculate intedex on each itteration pre calculate these and cache.
3. when possible do calculation on arrays at a time, ie multiple 2 arrays instead of doing it in a loop. "
Thank you for your reply, sir. As stated before, the "IMAQ Particle Analysis" only calculates moments on non-weighted (e.g. binary) particles.
The formula above includes the weight of each pixel.
1. The doubles are because the image is first filtered. This filter needs to convert the image to the DBL Type.
2. Could you please elaborate this, sir? I do not understand what you mean.
3. Effectively done in the solution. Thank you.
The Enrichment Center is required to remind you that you will be baked, and then there will be cake.

E72, tailored for speed?

Similar Messages

Maybe you are looking for