E72 - The GPS connects very slow

Hi, 
When I turn on the Ovi GPS on my Nokia e72 it connects sometimes fast and can show my where am at BUT when I want a guide to show me the way to a location it takes sometimes 20 - 30 minutes to find a road. And I live in Sweden in a big city. It dosent mater if I hold it in the air standing still or if im at the road in my car. And it dosent matter if I hold it in a horizontal way.
And the phone is updated..
Should I send it to service?

Hi underr
No need to send your E72 for service, it is a software issue of which Nokia are aware:/t5/Maps-Navigation-and-GPS/quot-Waiting-for-GPS-quot-problem-in-my-Nokia-E72/m-p/736353/highlight/t...
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Local mac-to-mac transfers goes through the internet connection (very slow)

    Transfering files from my iMac to my MacBook Air (or the opposite way) over my local Time Capsule wireless network is extremely slow. I connect to my MacBook Air using my local username account on that machine (which is the same as on the iMac). When I click on the connected MacBook Air again (under shared in Finder’s left column) it says I'm connected as [email protected] (my MobileMe address). Transfers then goes with around 50KB/s which is the same as my outbound capacity on my internet connection. If I disconnect the internet from the Time Capsule I get transfers around 2.2MB/s.
    I can’t actually log in as a local user on my other local machine. It goes through the internet no matter how I log in. Back To My Mac is even turned off on both machine.
    How can I fix this?

    You actually are close enough to their 3meg down that you can't complain. 2.8meg down and 700kb up is fine, unless it's supposed to be their FIOS that is.
    Sounds like it is the site(s) that are slow, like these boards at times.
    Joe

  • A user connect to the database is very slow.

    Hi, all!
    I met a problem in the database. A user(schema) connect to the database is very slow. and the user query the data is slow too.

    And some errors in the listener.log :
    23-Aus -2012 06:03:54 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=ora36)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(PORT=24923)) * establish * ora36 * 12514
    TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
    23-Aus -2012 06:03:54 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=ora36)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(PORT=23409)) * establish * ora36 * 12514
    TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
    23-Aus -2012 06:03:55 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=ora36)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(PORT=9103)) * establish * ora36 * 12514
    TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
    How can I resolve this, thanks!

  • Wireless N connection very slow

    I was running my wireless router at home (internet through Comcast) in mixed mode (b/g/n), and noticed that my S3's download speed when on the wireless seemed very slow. I confirmed this using speedtest.net (the android app) and saw a very big difference between the S3 on the wireless router and my laptop. I tested my wife's laptop and S3 as well, with the same results. (The laptops consistently got 20Mbps down while the S3s both got around 1.8Mpbs down.) The 4g LTE speeds were incredible, but since I'm on a data cap now, I can't use that for the majority of what I want to do with the phone.
    After some testing, I found that if I disabled N altogether on my router, our S3s connect and get the same speeds as our laptops. Now my router runs only in 2.4Ghz band, and I have not had a chance to test my N connection on a 5Ghz band. For whatever reason, the Verizon version of the S3 does not have a setting where you can tell the phone what band to connect to, but from what I've read it only connects at 2.4. I'm going to try some more testing to see if this is in fact the case or not.
    Anywho, I'm now getting good download speeds connecting in mode G, but I'm kind of bummed that Verizon has (surprise surprise) limited the phone in this way. AT&T and Sprint customers I've talked to are able to connect to Wireless N, and though some of them have problems if the band is set in auto mode, if they specifically choose the band their router is running in, it works just fine. Don't get me wrong, I choose to be with Verizon and generally am happy with the service (losing unlimited data notwithstanding), but I just don't understand why they took away the ability to control the wireless connection in this way. Its doesn't make sense.

    First of all, the speeds you are quoting all sound like Mbps (megabits per second) connection speeds, not data throughput speeds.  You really need to measure your actual download speed to tell what is actually going on with your system.
    Use speedtest.net and test your system.  Turn off all other computers except the test computer.  Test under the following conditions:
    1)  connect one computer, by wire, directly to your modem
    2)  connect the same computer, by wire, directly to your router
    3)  connect the same computer wireless to your router
    4)  connect your other computers, wirelessly to the router, one at a time
    Also, state the speed that you are paying your ISP for.
    Report your download and upload speeds for all of the above tests.
    Note that the speed that you are paying for should be about the same as your results from test 1 and 2 above.
    After you have done these tests, it will be much easier to tell where the problem is. 

  • Installed my new Airport extreme and try to link it to airport express  but the wifi still very slow

    I installed my new Airport extreme today and try to link it to my airport express to expend my wifi coverage to my second floor  but the wifi si very slow on second florr not better then without express? what can I do??

    Hi Francois
    Any wired connection or WiFi network extension (using your AirPort Express) with your second floor will make your network signal stronger but not necessarly faster.  If your WiFi signal is so poor that internet connection keeps dropping, it will make a speed difference.  Otherwise the only difference you'll notice is that the range of the wireless network has increased.
    You say "wifi is very slow on the second floor".  Do you mean that the internet is slow?  Is it very fast on the first floor?
    Try checking your internet connection speed on a laptop on each floor:
    speedtest.net
    and press "begin test recommended server".
    The download speed should approximate your ISP contracted speed.  Upload speed will be a fraction of this.  Wifi will be slower but unless you have a super-fast internet connection, you probably shouldn't notice it.
    Peter

  • Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    Hey there Logic Pro21,
    It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Verify that your computer meets the system requirements for Logic Pro X
    See Logic Pro X Technical Specifications.
    Test using the computer's built-in audio hardware
    If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
    Start Logic with a different project template
    Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
    Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    Isolate an issue by using another user account
    For more information see Isolating an issue by using another user account.
    Reinstall Logic Pro X
    Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
    In the Finder, choose Applications from the Go menu.
    Locate the Logic Pro X application and drag it to the trash.
    Open the Mac App Store
    Click the Purchases button in the Mac App Store toolbar.
    Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
    Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
    Click Install to download and install Logic Pro X.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on

    I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on and back off.  It is very, very frustrating.  The other issue is that the battery drains very quickly.  I have called Verizon numerous times regarding these issues.  They tell me to do different things that never help.  We eventually did a factory reset and it still has the same issues.  Help!  It is a brand new phone and unfortunately I am in a new two year contract.  Ugh. Is there anyone out there who can help me?

    I have done that several times.  In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly.  I keep telling them I have already done them but they insist they are SURE it will work this time.  It never does.  After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying.  I did what you suggested above on the slim chance it would work this time but it did not.  I bought two S5's that day and the other one works perfectly fine.  I know I got a bad phone.  Verizon just does not listen.  It is a bad phone.  I just want a new phone that works properly.  Is that too much to ask?  I bought a new phone that has been bad from day one.  Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this?  It shouldn't be this difficult!  Help please!!!

  • Since installing ICloud, and updating IO, programs and websites close whenever I scroll, going back to home page. I have tried turning it off, but that does not work. Can anyone help me out? Also, the keyboard is very slow.

    I am frustrated with the new update and the ICloud. Any program i open, or website I am in, closes suddenly, an returns to the Home page. Also the keyboard is very slow. None of this existed until I did the two updates. Can anyone help?

    MaryAmanda wrote:
    Does anyone know anything about onsite specifics?
    I'm wondering where the onsite warranty can be in effect.  Like, can it be used in ANY city in the US?  Can it be used only in metrololitan areas?  What is a metro area in Lenovo's eyes?
    Does anyone know where I can get better and accurate info on the onsite warranty?  Like a coverage map would be very helpful.  Because why should I spend the money on it, if I can't access it?
    Looking forward to more info...thanks.
    There is no coverage map as such.
    I live in what is considered a rural area and had techs driving 60-70 miles one way to get to me, never an issue.
    Obviously, YMMV.
    In my not-so-modest experience, both onsite and accidental damage upgrades are worth every penny if one intends to keep their ThinkPads for an extended period of time.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • The problem is with the new operating system  and sending photo via email when used in my iPad.   From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

    The problem is with the new operating system  and sending photo via email when used in my iPad.
    From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
    Can you amend he system to allow emails to be sent from photo as previously.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    You can always shut it down manually via the Task Manager
    (CtrlShiftEsc)...
    On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

  • Why the system is very slow than before

     I have two computers, One is desktop, another is laptop,but I met the problems about the performance for the two
    computers, from last Monday, two computers speed are very slow, after I checked the task manager, I found the service(ntoskrnl.exe) used the 60-70% CPU resource, but why the ntoskrnl.exe cause this? I also download the tools and analysised it, but it seems
    that no useful information,how to find the root cause?
    summary all the information as below
    1.Suddenly this problems happened
    2. I closed the AVP (Kaspersky antivirus software), but it seems no improved for the performance
    3. I have closed the Windows search service, but no change for this
    4\I use the maxthon and Firefox browse
    , all the same thing happened.
    you can download the Log file from http://1drv.ms/WwTBhU

    Hi,
    Any update in this thread?
    http://social.technet.microsoft.com/Forums/windows/en-US/ce42930b-f0f3-4df7-a621-d8f9d59109b4/why-the-system-is-very-slow-than-before?forum=w8itpronetworking
    Regards
    Yolanda Zhu
    TechNet Community Support

  • I installed yesterday iCloud , since the performance the system  is very slow with pinwheel at every clic

    I installed iCloud yesterday, since the system is very slow, with pin wheel at every click
    What can I do?

    I would ask in the dedicated iCloud forum.  Good luck.  https://discussions.apple.com/community/icloud

  • Since I've up-dated iPad 2 with IOS7, the typing is very slow. What should I do ?

    Since I've up-dated iPad 2 with IOS7, the typing is very slow. What should I do ?

    (A) Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.
    (B) Go to Settings>iCloud>Turn off Documents & Data>Restart your iPad.

  • Compaq sr1320nx /win xp after keystroke/command, the system is very slow 10-15 secs. before response

    after keystroke/command, the system is very slow 10-15 secs. before response

    What I've done is that I reinstalled 10.8.1 and each time, I ran disk utilitiy.  It has helped but fter a while, especially when waking up from sleep, EVERY app can take a lot of time to come up, including those already activated.  Every click would take at least 5secs to respond... and then the spinning ball comes up.
    It's only after the same app was used, then it would be smooth.  For example, I run my cursor down to the bottom of the screen where my dock is hidden.  It would take a few times of running down before the dock shows up.  From that point on, it would would work nicely unless I click on any of those apps in the dock.  Then, it would take another 5secs or more before something shows on the screen such as clicking on Mail.  It takes more than 5secs before mail pops up.  Then, when I click on any mailbox, it would take another 5secs or the spinning ball comes up.  From that point on, clicking on Mail is smooth and cicking on the same mailbox is smooth unless I click on a different mailbox or go to preferences, for example.
    So, I keep running disk utility almost everyday and now, it works 99% of the time.  If it slows again, I run the disk utility.  I guess that's the way to go until they come up with a proper fix.
    All this housekeeping work reminds me of Windows and the endless defragging and optimising.  That was one of the few reasons why I switched to Apple and now...
    Dear Mr Steve Jobs, please send some enlightenment to your Apple teams!

Maybe you are looking for