E72: When I connect a Bluetooth device, I get a te...

Hi there,
I wonder if you could help me. I just bought an E72. It's not tied to any service provider but I'm using it on Voda. It works fine. I've updated to most recently availible firmware.
I have a Honda Jazz with built in Bluetooth. The two are paired and work, no worries. The odd thing is that when I get in the car, the BT connect happens and almost in the same moment, I receive a text from "Service Provider" with MMS settings.
Initially I just accepted these settings as default, but it's getting quite anoying now as i'm sure you can imagine. I've searched this site for info and not found anything.
If anyone knows how to stop these messages, I'd really appreciate your comments.
Thanks for your attention.
Kind regards,
Dave

Again Hi David
another thing
try another SIM from the same and from other service provider. Maybe that's the cause
I hope that works this time , and please let me know
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

Similar Messages

Hi when I try to connect some bluetooth devices I get asked for my pass code for the mac air . I never had 1 is there a default code

hi
when I try to connect some bluetooth devices I get asked for my pass code for the mac air .
I never had 1 is there a default code
thanks
rob

the shaker wrote:
is there a default code
no.

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

My Iphone 6 (8.1.2) is very slow and sluggish to response whenever it is connected any bluetooth devices ex. my car audio or bluetooth headsets
The moment I disconnect the bluetooth , the phone turns normal again. This happens when i awaken the phone and try to access the home screen, this takes almost 4 to 5 seconds at times.
Is anyone facing similar issues, Please advice

HT204387 what is the bluetooth pairing default code to connect to bluetooth device (car).

What is the bluetooth pairing code to connect to bluetooth device (car) for iphone 4 w 7.os

first you must put your iphone in the discover mode by going to bluetooth on your phone which places it in discovery mode. Them you must go to your car's bluetooth discovery mode and place it in discovery mode. If the phone sees the car and visa versa, the car will give you a code to place into your phone. Once you put the code into the phone the two will be linked. Make sure that your car has "automatic" link set so that your phone will link every time you turn on the ignition. Refer to your car's manual for more help or go to your dealer, they should be able to help you or even do it for you, but you need to know how to be able to discover and then link bluetooth devices yourself because every bluetooth device uses the same discovery formula especially if you want to use your IOS devices to play music through your system using bluetooth.

I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers

I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers & stays until i restart.

Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen

HT204368 iphone5 bluetooth not connecting with bluetooth device

Hi
I am haveing problem to connect my bluetooth device with my iphone5.

Supported Bluetooth Profiles > http://support.apple.com/kb/HT3647

I have uninstalled and reinstalled iTunes multiple times. When I connect my iPod Classic I get the following message: The software for this iPod is not installed correctly. Please reinstall iTunes to install the required software. Any ideas?

I have uninstalled and reinstalled iTunes multiple times. When I connect my iPod Classic I get the following message: The software for this iPod is not installed correctly. Please reinstall iTunes to install the required software. Any ideas?

Assuming you have windows, try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

HT4623 I try to update ios to 6.1 but it doesn't work and now iphone gone to factory mode from initial stage and upon when am connecting to itune its not getting thru, kindly advice

I try to update ios to 6.1 but it doesn't work and now iphone gone to factory mode from initial stage and upon when am connecting to itune its not getting thru, kindly advice

From the Firefox help files;<BR><BR>
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.

How do I connect multiple bluetooth devices to macbook pro

Hi,
I would like to connect bluetooth headset(Bose), my Magic mouse together to my macbook pro.
Also, If possible, I would like to use bluetooh headset and wired headset at the same time.
Is it possible, if yes, could some one guide me.
Regards
Sandy

Multiple Bluetooth devices may be connected to your computer at the same time.
Set up differs from device to device. The Bluetooth set up assistant should find new devices when they are turned on and in range of your computer.
Barry

Anyone unable to connect to bluetooth devices on iphone 4 GSM after 4.3.5 update?

After I updated my iphone 4 to 4.3.5 firmware I have not been able to connect to any bluetooth devices. Also what is strange is that I also updated my wife's 3GS to 4.3.5 and she cannot connect to any bluetooth devices eitherl. When I search for anyone else having this issue I find nothing. Anybody?

cliffsnotez wrote:
After I updated my iphone 4 to 4.3.5 firmware I have not been able to connect to any bluetooth devices. Also what is strange is that I also updated my wife's 3GS to 4.3.5 and she cannot connect to any bluetooth devices eitherl. When I search for anyone else having this issue I find nothing. Anybody?
I have no bluetooth problem after updating to 4.3.5. Have you tried un-pairing the devices, then pairing them as new devices? Have you tried Reset Network Settings? And have you seen this: iOS: Wi-Fi or Bluetooth settings grayed out or dim

Trouble connecting to bluetooth devices.

I have an iPhone 4 with ios 5.0.1 software and i am having trouble connecting it via bluetooth to a mac so i can send pictures from one to another. I am also unable to connect to any other bluetooth device except for one in the past, a Motorola device that let you listen to music in the car wirelessly with any bluetooth device such as droid, blackberry, or iphone. Please help?

http://http://worldwide.bose.com/productsupport/en_us/web/troubleshooting_soundl ink_mobile_pairing_connecting/page.html
On the SoundLink® speaker, press and hold the Bluetooth® button for approximately 10 seconds until you hear a tone. The SoundLink® speaker clears all Bluetooth® devices from its memory and becomes discoverable
Clear the list on your Bluetooth® device. For more information, please refer to the manufacturer of the device
Perform a product reset. On the speaker, press and hold Mute for 10 seconds, the LEDs will flash briefly. Press Power to turn the SoundLink® speaker back on
Try pairing the device again by following these steps:
With the Bluetooth® device and the SoundLink® speaker both turned on, press and hold the Bluetooth® button on the speaker for three seconds to make the speaker discoverable. The Bluetooth® indicator will slowly fade on and off approximately once every second to show the speaker is in discoverable mode
Set your Bluetooth® device to "Discoverable." This will allow your device to discover the SoundLink® speaker
On your device, locate the Bluetooth® device list. Select "Bose SoundLink" from the list
If your device asks for a passkey, enter digits 0000 and press OK. Some devices also ask you to accept the connection. YourBluetooth® device indicates when pairing is complete. The SoundLink® speaker indicates pairing is complete when the Bluetoothindicator stops fading on and off and remains on

NO audio from laptop speaker when phone connected to Bluetooth with media audio checked

Hey guys, when I connect my Verizon Samsung Galaxy SIII (SGS3) phone through my Toshiba Qosmio x875-Q7280 Windows 7 X64 Bluetooth with media audio checked on my SGS3; for what ever reason there is no audio playing through the speaker when I try to listen to my music and for what ever reason I notice in the recoding tab under Sound my SGS3 profile mic audio bar was moving up and down. When I went in to configure it, I click a check box which played the music that I was playing through the laptop speaker but it sounded all muffled. If anyone can help would very much appreciate it.
Solved!
Go to Solution.

Just wanted to update just incase someone else is have this same problem also, so I manage to solve this on my own my installing a bluetooth driver from Intel. I'm not sure if link posting is allow, so I'll just direct you there. If you google Intel and navigate to their download center, search for Intel® PROSet/Wireless Bluetooth Software for Windows 7* it should have two choice 32 bit and 64 bit. After it finish installing there should be another bluetooth icon in your bottom right tray. Next right click the bluetooth icon and add a new device as you would any other and enable media audio from your connected device (in this case it would be my Samsung Galaxy S 3) and you should be good to go with music or what ever sound coming out through the laptop speaker.

Can`t connect to bluetooth devices with iphone6

When I go into Bluetooth, the onlty devices that show are my other Iphone and Ipad. Can`t connect to anything else as it doesn`t show up.

I Am having the same issue, and it looks like its an iPhone 6 thing. I connect my phone to my car stereo via Bluetooth, and my iPhone 4 and 5 worked perfectly. My 5 is even running iOS 8 and has no problem. I got my iPhone 6 yesterday and Bluetooth cannot connect. It can't even see any Bluetooth devices out there, while my 5, running alongside it can. I set up my phone via my iCloud backup, so I assumed maybe there are old settings in there from the 5, so I deleted network preferences. No luck. It also does not connect to wifi unless forced. What is wrong? I am disappointed in the quality of both ios8 and iphone6. They remind me of flaky android devices. Any suggestions??

Can't connect to bluetooth device and wifi really por

Hi,
I bought recently a Pavilion 15-p036tx and I can't connect to my bluetooth device as logitech audio adapter, toshiba bluetooth mose and phone HTC.
I noticed as well that the wifi connection is realy por only 1strip.
I have a old HP Pvilion I bought in 2007 which is connecting to my bluetooth devices and the wifi is at full bandwith perfectly.
It's realy seams to be a driver issue. On the HP support donwload page the is too many drives. Which one should I use?
Nicolas

@NicolasBilly ,
Hello and thank you for posting on the HP support forums. Here is a link that you may find useful.
HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)
Here is another one may help.
HP PCs - Using Bluetooth Devices (Windows 8)
Let me know if you need any more help.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Can I connect multiple bluetooth devices, to an IOS device

Hi I have a Logitech Ultrathin keyboard cover, for the new IPad. I'm using the keyboard, all the time my IPad is in use. And sometimes I want to connect my Bluedio R+ bluetooth stereo headset, with bluetooth 4.0 NFC technology. So my question is can I connect both of my external bluetooth devices, at th same time?
Best Regards Alican!

Yes.
Barry

E72: When I connect a Bluetooth device, I get a te...

Similar Messages

Maybe you are looking for