E72 WiFi Connectivity based on IEEE 802.1x (PAEP)

Hello,
I have a WiFi in my office that requires you to have a certificate installed on your laptops to connect through it using IEEE802.1x (PAEP) authentication. Now I have my laptop connected through Wifi but when I want to connect my Nokia E72 cell phone using the same WiFi; it is unable to connect, in fact it asks for a WEP Key which I don't know what is it because when I connected my laptop after configuring my domain user id and password it worked without asking for any key. Now how do I add my these settings onto my cell phone to be able to use my office's WiFi. I have added the certificate into my cell phones certificate library but it is still not working. Can anyone suggest a possible solution for this issue. It would be of real great help.
Regards,
Adil J. Chughtai

Read the posts from Saataja about EAP-PEAP.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

  • E72 - WIFI connection to house routers

    Hi,
    I have this Nokia E72 for a while, recently I am using it again.  Unable to connect my house's WIFI connection.  My house's internet connection is via Fibre.  Last time, I used the mobile to connect my old router's connection, have no problem.  I have tried my mobile data connection (wireless) also have no problem.  Please help!

    Presumably you are using WLAN Wizard in Menu > Control Panel > Connectivity?
    Is this a Virgin Media Superhub router?http://help.virginmedia.com/system/selfservice.controller?CMD=VIEW_ARTICLE&ARTICLE_ID=345026&CURRENT...
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Is there a way to have your iPad automatically switch wifi connection based on signal strength?

    I have multiple wifi access points in my house as it is very large. The SSID's are different, and signal is fine coming from one of the two access points. The problem is that when I move about my house, I will stay connected to the access point that is far away, and so I have to go into settings and switch wifi networks each time. Is there a way to set up your iPad so that it automatically switches connections based on signal strength?

    Probably not, or .. maybe. I can't think of any reason why that would be added into the OS as the number of situations where it would come into play is really quite small.
    If they're all entered as wifi accounts and all show as accessible, walk around the house and sign in to each one in turn. They should all be remembered after that; now, walk around while staying logged into one and see what happens when you get a big spread in received signal strengths.
    I really don't think it will change on its own, but it might. Who knows? Even if not, it'd be a matter of not more than 10-15 seconds to make the switch manually.

  • Sudden slow wifi connection with Airport Express 802.11n

    Recently, all of a sudden I noticed the speed of my internet droped dramaticlly from ~27Mbps to ~4Mbps (Speedtest.com) Comcast's blast. When I connect my laptop directly to the modem there is no problem with the speed. I tried restarting the modem, changing the channel/radio mode on the airport express, hard reset the airport epress, change the location of the airport express but nothing has changed. I notice that the speed fluctuate on speedtest.com meaning it ranges from 1-3 to 5-7Mbps. I test the speed on three other laptops but still got the same result. The only change I can think of that could effect this is the addetion of two computers to the network but I would still get the same speed when they are powered off.
    Thanks

    willcyrier wrote:
    Do I have to change anything on my computers?
    you use +airport utility+ (AU) (in your applications > utilities folder). launch AU, double-click on the icon of your extreme to enter manual setup, and go to the wireless tab. see this screen shot
    however, before you do, i recommend you download iStumbler (does not work with Snow Leopard) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel of your network as far away as possible from those.
    good luck !

  • New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,etc

    New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2.  Currently router is running in mixed b and g mode.

    If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
    It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

  • IEEE 802.1x port-based authetication

    I want to configure IEEE 802.1x port-based authentication on cisco switches, preferable 2960 series. Which models support this feature?. I have try with some older switches but it doesn't works properly on everyone.
    I have upgraded them whitout better results, there is namely an issue with TLS handshaking on some switches which produces authentication to fail.

    Hi Claudia,
    do you mean that the EAP-TLS authentication fails only on some 2960 switches and it works on other 2960s?
    What is the IOS version you're using there?
    What is the RADIUS server in use?
    What is the exact error message you see on the RADIUS side?
    Usually, the reason for the EAP-TLS handshake failure is to be troubleshoot on the supplicant and AAA server, however, there may be something on the switch depending on the certificate size and MTU settings on the switch(es).
    What is the server cert size and the MTU configured on the switches?
    With the info you provided it's difficult to say what's the reason of this failure.
    I would suggest to start looking into the above mentioned topics, else you would need to proceed with deeper debugging and sniffer traces, which may be better/easier to handle through a TAC case.
    I hope this helps.
    Regards,
    Federico
    If this answers your question please mark the question as "answered" and rate it, so other users can easily find it.

  • Anyone successfully configured 802.1x Cisco LEAP wifi connection?

    Till now I've tried couples of profile setting via iPhone configuration web utility, but finally I still didn't get there, the wifi connection of our office. Right account name and password, right protocol, but I didn't find the CKIP encryption option and domain name type-in frame. Anyone could help me? Thanks in advance!
    office wifi security: Cisco 802.1x/LEAP/CKIP

    Same problem here. Sometimes it says I'm connected with a 192.168.x.x address, and I can't get to the web, but other times it doesn't even pretend to connect, and has an IP address of 169.x.x.x.
    Our normal internal company IP addresses are 10.125.x.x.
    WEP encryption, CPIK.
    Corporate laptop connects just fine with the same settings (as far as I can tell anyway), the only odd thing is that we use the intel proset utility to enable cisco extensions to the LEAP section of the security. Don't know if the iPhone supports that or not?

  • Having trouble staying connected to IEEE 802.1X with my iPhone 4s

    I got my iPhone 4S pre-ordered with Verizon and I am having trouble staying connected to my college's 802.1x WiFi connection. My college has a help website with a walkthrough to connect to the network and it works and I can get WiFi on my phone but when I lock my phone for about 1 minute my phone forgets the connection and I have to go through the steps all over again to get connected.
    Here are the steps my school site has me follow:
    Connecting to the RPI Wireless Network Using 802.1x Authentication on the iPhone / iPod Touch
    Make sure that your device has been updated to the latest software version available.
    Go into Settings and select Wi-Fi.
    Make sure the Wi-Fi switch is set to ON.
    Under Choose a Network, select Other....
    Enter rpi_802.1x for the Network Name, and press the Security option.
    Select WPA2 Enterprise as the security, then press the Other Network button in the top-left corner to return to the previous screen.
    Enter your RCS userID and password in the appropriate fields and press the blue Join button in the bottom-right.
    Let the network access load, then press the Accept button to accept the certificate provided.
    This is really annoying so any help would be appreciated.

    We use 802.1x Authentication here at UCSD and it seems fine.
    The only problem i see is it will disconnect when you lock the phone but it automatically reconnects when you unlock the phone.
    Our setup is a lot simpler, you just select the network and enter in your AD account information.
    It could be your college has not setup their wifi correctly. You should connect your network team.
    http://blink.ucsd.edu/technology/network/connections/wireless/iphone4.html

  • Wifi connection drops down. [SOLVED]

    Hi, I'm having some issues with the wifi, in my notebook lenovo b5070. The main problem is that the connection drops down after 20, 30 minutes. I tried to change from NetworkManager to Wicd, but that didn't change anything. I also tried to create a profile and connect me through netctl, but again that didn't change anything. Other issues that I'm having are: Sometimes I can't even connect to the wifi, or if I can connect finally, and I try to request some website, the browser keeps idle and finally shows a "Server not found" message. Also the wifi signal seems pretty fine. I also tried change the tx, rts to the max with iwconfig, but this didn't change anything. I'm running out of ideas. Any idea?
    Here is some info:
    [astinx@compu ~]$ lsusb
    Bus 003 Device 002: ID 8087:8000 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 005: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
    Bus 001 Device 004: ID 0bda:b728 Realtek Semiconductor Corp.
    Bus 001 Device 003: ID 0c45:6514 Microdia
    Bus 001 Device 002: ID 0458:012b KYE Systems Corp. (Mouse Systems)
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    [astinx@compu ~]$ iwconfig
    wlp9s0 IEEE 802.11bgn ESSID:"albele"
    Mode:Managed Frequency:2.437 GHz Access Point: 00:1D:7E:6A:C4:67
    Bit Rate=54 Mb/s Tx-Power=20 dBm
    Retry short limit:7 RTS thr=2347 B Fragment thr:off
    Power Management:off
    Link Quality=52/70 Signal level=-58 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    lo no wireless extensions.
    enp8s0 no wireless extensions.
    [astinx@compu ~]$ ifconfig
    enp8s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    ether f0:76:1c:0c:12:99 txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 bytes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
    inet 127.0.0.1 netmask 255.0.0.0
    inet6 ::1 prefixlen 128 scopeid 0x10<host>
    loop txqueuelen 0 (Local Loopback)
    RX packets 336 bytes 29472 (28.7 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 336 bytes 29472 (28.7 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    wlp9s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet 192.168.1.111 netmask 255.255.255.0 broadcast 192.168.1.255
    inet6 fe80::fa77:2850:54a4:4213 prefixlen 64 scopeid 0x20<link>
    ether 38:b1:db:4f:f7:33 txqueuelen 1000 (Ethernet)
    RX packets 192 bytes 52270 (51.0 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 1297 bytes 138803 (135.5 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    [astinx@compu ~]$ lspci -k
    00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
    Subsystem: Lenovo Device 3978
    00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: i915
    Kernel modules: i915
    00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_pci
    00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: mei_me
    Kernel modules: mei_me
    00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 2 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: lpc_ich
    Kernel modules: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel driver in use: ahci
    Kernel modules: ahci
    00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
    Subsystem: Lenovo Device 3978
    Kernel modules: i2c_i801
    02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
    Subsystem: Lenovo Device 3801
    Kernel driver in use: rtsx_pci
    Kernel modules: rtsx_pci
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
    Subsystem: Lenovo Device 380e
    Kernel driver in use: r8169
    Kernel modules: r8169
    09:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
    Subsystem: Lenovo Device b736
    Kernel driver in use: rtl8723be
    Kernel modules: rtl8723be
    [astinx@compu ~]$ lsusb
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.5-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009735ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000097360000-0x0000000097b5ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000097b60000-0x000000009c36efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009c36f000-0x000000009c56efff] type 20
    [ 0.000000] BIOS-e820: [mem 0x000000009c56f000-0x000000009cebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
    [ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem02: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem03: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000080000) (0MB)
    [ 0.000000] efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000080000-0x0000000000082000) (0MB)
    [ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000082000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem06: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3b000) (14MB)
    [ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f3b000-0x0000000037926000) (873MB)
    [ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000037926000-0x0000000037c8b000) (3MB)
    [ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037c8b000-0x000000006ea96000) (878MB)
    [ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000006ea96000-0x0000000094b70000) (608MB)
    [ 0.000000] efi: mem13: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000094b70000-0x0000000094b90000) (0MB)
    [ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000094b90000-0x00000000968e3000) (29MB)
    [ 0.000000] efi: mem15: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000968e3000-0x0000000097360000) (10MB)
    [ 0.000000] efi: mem16: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000097360000-0x0000000097b60000) (8MB)
    [ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097b60000-0x0000000097d52000) (1MB)
    [ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000097d52000-0x0000000097d6f000) (0MB)
    [ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000097d6f000-0x000000009951f000) (23MB)
    [ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009951f000-0x0000000099f09000) (9MB)
    [ 0.000000] efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f09000-0x0000000099f0e000) (0MB)
    [ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f0e000-0x0000000099f14000) (0MB)
    [ 0.000000] efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f14000-0x0000000099f16000) (0MB)
    [ 0.000000] efi: mem24: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f16000-0x0000000099f3f000) (0MB)
    [ 0.000000] efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099f3f000-0x0000000099f40000) (0MB)
    [ 0.000000] efi: mem26: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000099f40000-0x000000009a08e000) (1MB)
    [ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a08e000-0x000000009a094000) (0MB)
    [ 0.000000] efi: mem28: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a094000-0x000000009a095000) (0MB)
    [ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a095000-0x000000009a097000) (0MB)
    [ 0.000000] efi: mem30: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a097000-0x000000009a09b000) (0MB)
    [ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a09b000-0x000000009a09c000) (0MB)
    [ 0.000000] efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a09c000-0x000000009a0d5000) (0MB)
    [ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0d5000-0x000000009a0d7000) (0MB)
    [ 0.000000] efi: mem34: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0d7000-0x000000009a0dc000) (0MB)
    [ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0dc000-0x000000009a0df000) (0MB)
    [ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0df000-0x000000009a0e7000) (0MB)
    [ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0e7000-0x000000009a0ea000) (0MB)
    [ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ea000-0x000000009a0eb000) (0MB)
    [ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a0eb000-0x000000009a0ef000) (0MB)
    [ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a0ef000-0x000000009a193000) (0MB)
    [ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009a193000-0x000000009a194000) (0MB)
    [ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009a194000-0x000000009bd6f000) (27MB)
    [ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009bd6f000-0x000000009bf51000) (1MB)
    [ 0.000000] efi: mem44: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009bf51000-0x000000009bf5b000) (0MB)
    [ 0.000000] efi: mem45: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bf5b000-0x000000009c36f000) (4MB)
    [ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c36f000-0x000000009c56f000) (2MB)
    [ 0.000000] efi: mem47: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c56f000-0x000000009cabf000) (5MB)
    [ 0.000000] efi: mem48: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009cabf000-0x000000009cebf000) (4MB)
    [ 0.000000] efi: mem49: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009cebf000-0x000000009cfbf000) (1MB)
    [ 0.000000] efi: mem50: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cfbf000-0x000000009cfff000) (0MB)
    [ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
    [ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000015f600000) (1526MB)
    [ 0.000000] efi: mem53: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem54: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
    [ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [ 0.000000] efi: mem56: [Reserved | | | | | | | | | ] range=[0x00000000fe101000-0x00000000fe113000) (0MB)
    [ 0.000000] efi: mem57: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
    [ 0.000000] efi: mem58: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem59: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
    [ 0.000000] efi: mem60: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem61: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem62: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffa00000-0x0000000100000000) (6MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20384/Lenovo B50-70, BIOS 9DCN21WW(V2.02) 06/27/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
    [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
    [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
    [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
    [ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
    [ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
    [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
    [ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9735ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x971fffff] page 2M
    [ 0.000000] [mem 0x97200000-0x9735ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x97b60000-0x9c36efff]
    [ 0.000000] [mem 0x97b60000-0x97bfffff] page 4k
    [ 0.000000] [mem 0x97c00000-0x9c1fffff] page 2M
    [ 0.000000] [mem 0x9c200000-0x9c36efff] page 4k
    [ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
    [ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x37926000-0x37c8afff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 0x000000009CFE7000 00DA18 (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x000000009CFBA000 000040
    [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 0x000000009CFE6000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFE5000 000700 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x000000009CFE3000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: LPIT 0x000000009CFE2000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 0x000000009CFE0000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DBGP 0x000000009CFDF000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFDA000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD9000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD5000 003537 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 0x000000009CFD4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x15f5f9000-0x15f5fcfff]
    [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0006efff]
    [ 0.000000] node 0: [mem 0x00070000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x9735ffff]
    [ 0.000000] node 0: [mem 0x97b60000-0x9c36efff]
    [ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x15f5fffff]
    [ 0.000000] On node 0 totalpages: 1028342
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 24 pages reserved
    [ 0.000000] DMA zone: 3974 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9902 pages used for memmap
    [ 0.000000] DMA32 zone: 633712 pages, LIFO batch:31
    [ 0.000000] Normal zone: 6104 pages used for memmap
    [ 0.000000] Normal zone: 390656 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x97360000-0x97b5ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9c36f000-0x9c56efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9c56f000-0x9cebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88015f200000 s82880 r8192 d31808 u262144
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012248
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=37f0494b-6280-4a2a-92af-9abc262b3476 rw resume=UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3909256K/4113368K available (5480K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 204112K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:760 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2394.377 MHz processor
    [ 0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.28 BogoMIPS (lpj=7981256)
    [ 0.000045] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20140926
    [ 0.018809] ACPI: All ACPI Tables successfully acquired
    [ 0.039185] Security Framework initialized
    [ 0.039194] Yama: becoming mindful.
    [ 0.039553] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.040627] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.041121] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.041129] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.041378] Initializing cgroup subsys memory
    [ 0.041384] Initializing cgroup subsys devices
    [ 0.041386] Initializing cgroup subsys freezer
    [ 0.041389] Initializing cgroup subsys net_cls
    [ 0.041391] Initializing cgroup subsys blkio
    [ 0.041417] CPU: Physical Processor ID: 0
    [ 0.041419] CPU: Processor Core ID: 0
    [ 0.041424] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.042651] mce: CPU supports 7 MCE banks
    [ 0.042667] CPU0: Thermal monitoring enabled (TM1)
    [ 0.042682] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.042812] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.043856] Ignoring BGRT: invalid status 0 (expected 1)
    [ 0.045955] ftrace: allocating 20931 entries in 82 pages
    [ 0.058119] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.091151] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
    [ 0.091159] TSC deadline timer enabled
    [ 0.091185] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.091212] ... version: 3
    [ 0.091214] ... bit width: 48
    [ 0.091215] ... generic registers: 4
    [ 0.091216] ... value mask: 0000ffffffffffff
    [ 0.091217] ... max period: 0000ffffffffffff
    [ 0.091218] ... fixed-purpose events: 3
    [ 0.091220] ... event mask: 000000070000000f
    [ 0.111308] x86: Booting SMP configuration:
    [ 0.111311] .... node #0, CPUs: #1
    [ 0.125959] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.132620] #2 #3
    [ 0.168461] x86: Booted up 1 node, 4 CPUs
    [ 0.168465] smpboot: Total of 4 processors activated (19162.14 BogoMIPS)
    [ 0.173479] devtmpfs: initialized
    [ 0.176167] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
    [ 0.177292] pinctrl core: initialized pinctrl subsystem
    [ 0.177339] RTC time: 15:39:50, date: 02/08/15
    [ 0.177475] NET: Registered protocol family 16
    [ 0.189973] cpuidle: using governor ladder
    [ 0.203321] cpuidle: using governor menu
    [ 0.203363] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.203364] ACPI: bus type PCI registered
    [ 0.203366] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.203456] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.203459] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.203881] PCI: Using configuration type 1 for base access
    [ 0.217092] ACPI: Added _OSI(Module Device)
    [ 0.217094] ACPI: Added _OSI(Processor Device)
    [ 0.217096] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.217098] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.222927] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.237854] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.250192] ACPI: Dynamic OEM Table Load:
    [ 0.250204] ACPI: SSDT 0xFFFF880158F80C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [ 0.263714] ACPI: Dynamic OEM Table Load:
    [ 0.263726] ACPI: SSDT 0xFFFF880158F59800 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
    [ 0.276877] ACPI: Dynamic OEM Table Load:
    [ 0.276887] ACPI: SSDT 0xFFFF880158E92800 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [ 0.303769] ACPI: Interpreter enabled
    [ 0.303781] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.303790] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.303817] ACPI: (supports S0 S3 S4 S5)
    [ 0.303818] ACPI: Using IOAPIC for interrupt routing
    [ 0.303851] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.416427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.416435] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.417003] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.417721] PCI host bridge to bus 0000:00
    [ 0.417725] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.417728] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.417730] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.417732] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.417734] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.417736] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.417738] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.417740] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.417742] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.417744] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.417746] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.417748] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.417750] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 0.417760] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.417946] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.417962] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb23fffff 64bit]
    [ 0.417971] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.417977] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 0.418153] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.418164] pci 0000:00:03.0: reg 0x10: [mem 0xb2610000-0xb2613fff 64bit]
    [ 0.418365] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.418385] pci 0000:00:14.0: reg 0x10: [mem 0xb2600000-0xb260ffff 64bit]
    [ 0.418450] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.418565] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.418612] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.418635] pci 0000:00:16.0: reg 0x10: [mem 0xb2618000-0xb261801f 64bit]
    [ 0.418711] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.418877] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.418893] pci 0000:00:1b.0: reg 0x10: [mem 0xb2614000-0xb2617fff 64bit]
    [ 0.418968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.419082] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.419126] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.419198] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.419353] pci 0000:00:1c.1: [8086:9c12] type 01 class 0x060400
    [ 0.419428] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.419584] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.419659] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.419813] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.419888] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.420052] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.420074] pci 0000:00:1d.0: reg 0x10: [mem 0xb261c000-0xb261c3ff]
    [ 0.420172] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.420309] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.420363] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.420631] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.420647] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f]
    [ 0.420655] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
    [ 0.420663] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087]
    [ 0.420671] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
    [ 0.420678] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 0.420686] pci 0000:00:1f.2: reg 0x24: [mem 0xb261b000-0xb261b7ff]
    [ 0.420728] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.420878] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.420894] pci 0000:00:1f.3: reg 0x10: [mem 0xb2619000-0xb26190ff 64bit]
    [ 0.420915] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f]
    [ 0.421136] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.421234] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
    [ 0.421269] pci 0000:02:00.0: reg 0x10: [mem 0xb1000000-0xb1000fff]
    [ 0.421424] pci 0000:02:00.0: supports D1 D2
    [ 0.421427] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
    [ 0.421466] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.427022] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
    [ 0.427027] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.427030] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
    [ 0.427036] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
    [ 0.427119] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.427139] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
    [ 0.427169] pci 0000:08:00.0: reg 0x18: [mem 0xb2504000-0xb2504fff 64bit]
    [ 0.427188] pci 0000:08:00.0: reg 0x20: [mem 0xb2500000-0xb2503fff 64bit]
    [ 0.427291] pci 0000:08:00.0: supports D1 D2
    [ 0.427293] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.427358] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 0.433685] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [ 0.433689] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.433693] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
    [ 0.433780] pci 0000:09:00.0: [10ec:b723] type 00 class 0x028000
    [ 0.433803] pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff]
    [ 0.433837] pci 0000:09:00.0: reg 0x18: [mem 0xb2400000-0xb2403fff 64bit]
    [ 0.433959] pci 0000:09:00.0: supports D1 D2
    [ 0.433961] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.433994] pci 0000:09:00.0: System wakeup disabled by ACPI
    [ 0.443696] pci 0000:00:1c.3: PCI bridge to [bus 09]
    [ 0.443699] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
    [ 0.443703] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
    [ 0.443740] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.497639] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497748] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497800] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497902] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.497953] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.498004] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.498197] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.498242] ACPI : EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
    [ 0.498365] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.498368] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.498372] vgaarb: loaded
    [ 0.498373] vgaarb: bridge control possible 0000:00:02.0
    [ 0.498519] PCI: Using ACPI for IRQ routing
    [ 0.504636] PCI: pci_cache_line_size set to 64 bytes
    [ 0.504686] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
    [ 0.504688] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.504689] e820: reserve RAM buffer [mem 0x97360000-0x97ffffff]
    [ 0.504691] e820: reserve RAM buffer [mem 0x9c36f000-0x9fffffff]
    [ 0.504693] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    [ 0.504695] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
    [ 0.504822] NetLabel: Initializing
    [ 0.504823] NetLabel: domain hash size = 128
    [ 0.504824] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.504838] NetLabel: unlabeled traffic allowed by default
    [ 0.504863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.504870] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.506900] Switched to clocksource hpet
    [ 0.512939] pnp: PnP ACPI init
    [ 0.513126] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.513129] system 00:00: [io 0x0500-0x053f] has been reserved
    [ 0.513132] system 00:00: [io 0xffff] has been reserved
    [ 0.513134] system 00:00: [io 0xffff] has been reserved
    [ 0.513136] system 00:00: [io 0xffff] has been reserved
    [ 0.513139] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 0.513141] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.513145] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.513202] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.513256] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 0.513259] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.513288] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.513351] pnp 00:04: Plug and Play ACPI device, IDs SYN2b39 SYN0700 SYN0002 PNP0f13 (active)
    [ 0.563797] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.563800] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.563802] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.563804] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.563807] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.563809] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.563811] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.563813] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
    [ 0.563816] system 00:05: [mem 0xff001000-0xff0010ff] has been reserved
    [ 0.563818] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
    [ 0.563821] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.563823] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
    [ 0.563825] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [ 0.563829] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.564138] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.564571] pnp: PnP ACPI: found 7 devices
    [ 0.571172] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.571185] pci 0000:00:1c.1: PCI bridge to [bus 02-07]
    [ 0.571188] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.571193] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff]
    [ 0.571197] pci 0000:00:1c.1: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
    [ 0.571203] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [ 0.571206] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    [ 0.571211] pci 0000:00:1c.2: bridge window [mem 0xb2500000-0xb25fffff]
    [ 0.571218] pci 0000:00:1c.3: PCI bridge to [bus 09]
    [ 0.571221] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
    [ 0.571226] pci 0000:00:1c.3: bridge window [mem 0xb2400000-0xb24fffff]
    [ 0.571235] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.571237] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.571239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.571241] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.571243] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.571245] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.571247] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.571249] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.571251] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.571253] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.571255] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.571257] pci_bus 0000:00: resource 15 [mem 0x9fa00000-0xfeafffff]
    [ 0.571260] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
    [ 0.571261] pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb1ffffff]
    [ 0.571264] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
    [ 0.571266] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
    [ 0.571268] pci_bus 0000:08: resource 1 [mem 0xb2500000-0xb25fffff]
    [ 0.571270] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
    [ 0.571272] pci_bus 0000:09: resource 1 [mem 0xb2400000-0xb24fffff]
    [ 0.571305] NET: Registered protocol family 2
    [ 0.571528] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.571618] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.571715] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.571736] TCP: reno registered
    [ 0.571744] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.571763] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.571824] NET: Registered protocol family 1
    [ 0.571842] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.583761] PCI: CLS 64 bytes, default 64
    [ 0.583812] Unpacking initramfs...
    [ 0.665763] Freeing initrd memory: 3476K (ffff880037926000 - ffff880037c8b000)
    [ 0.665775] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.665778] software IO TLB [mem 0x90b70000-0x94b70000] (64MB) mapped at [ffff880090b70000-ffff880094b6ffff]
    [ 0.665818] Simple Boot Flag at 0x44 set to 0x1
    [ 0.666015] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.666080] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666087] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666095] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666104] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
    [ 0.666156] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.666187] Scanning for low memory corruption every 60 seconds
    [ 0.666541] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.666577] Initialise system trusted keyring
    [ 0.666959] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.668721] zpool: loaded
    [ 0.668726] zbud: loaded
    [ 0.668990] VFS: Disk quotas dquot_6.5.2
    [ 0.669031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.669172] msgmni has been set to 7751
    [ 0.669234] Key type big_key registered
    [ 0.669453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.669499] io scheduler noop registered
    [ 0.669502] io scheduler deadline registered
    [ 0.669540] io scheduler cfq registered (default)
    [ 0.669759] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.669935] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.670110] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.670269] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 0.670374] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.670379] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.670396] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.670398] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.670402] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.670419] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.670421] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
    [ 0.670424] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.670440] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.670442] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
    [ 0.670446] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.670466] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.670499] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
    [ 0.670533] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
    [ 0.670539] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.670583] efifb: probing for efifb
    [ 0.670605] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010800000, using 4160k, total 4160k
    [ 0.670606] efifb: mode is 1366x768x32, linelength=5504, pages=1
    [ 0.670607] efifb: scrolling: redraw
    [ 0.670609] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.674675] Console: switching to colour frame buffer device 170x48
    [ 0.678177] fb0: EFI VGA frame buffer device
    [ 0.678188] intel_idle: MWAIT substates: 0x11142120
    [ 0.678190] intel_idle: v0.4 model 0x45
    [ 0.678191] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.678506] GHES: HEST is not enabled!
    [ 0.678574] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.679056] Linux agpgart interface v0.103
    [ 0.679108] rtc_cmos 00:01: RTC can wake from S4
    [ 0.679243] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.679273] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.679287] Intel P-state driver initializing.
    [ 0.679431] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.679696] TCP: cubic registered
    [ 0.679919] NET: Registered protocol family 10
    [ 0.680456] NET: Registered protocol family 17
    [ 0.681245] Loading compiled-in X.509 certificates
    [ 0.681277] registered taskstats version 1
    [ 0.682279] Magic number: 3:299:689
    [ 0.682435] rtc_cmos 00:01: setting system clock to 2015-02-08 15:39:50 UTC (1423409990)
    [ 0.682615] PM: Checking hibernation image partition UUID=38f5c3ea-1283-4a7e-a952-49dee4e9b5ae
    [ 0.682621] PM: Hibernation image not present or could not be loaded.
    [ 0.684595] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 0.684599] Write protecting the kernel read-only data: 8192k
    [ 0.688817] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 0.690614] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 0.702916] random: systemd-tmpfile urandom read with 3 bits of entropy available
    [ 0.718779] sdhci: Secure Digital Host Controller Interface driver
    [ 0.718781] sdhci: Copyright(c) Pierre Ossman
    [ 0.720168] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
    [ 0.726783] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.726825] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.727977] ACPI: bus type USB registered
    [ 0.727998] usbcore: registered new interface driver usbfs
    [ 0.728005] usbcore: registered new interface driver hub
    [ 0.728031] usbcore: registered new device driver usb
    [ 0.728826] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.728833] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.728904] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.728919] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
    [ 0.729105] hub 1-0:1.0: USB hub found
    [ 0.729116] hub 1-0:1.0: 9 ports detected
    [ 0.729254] rtsx_pci 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 0.729269] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
    [ 0.729962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.730134] ehci-pci: EHCI PCI platform driver
    [ 0.731658] SCSI subsystem initialized
    [ 0.732538] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.732545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.732737] hub 2-0:1.0: USB hub found
    [ 0.732750] hub 2-0:1.0: 4 ports detected
    [ 0.733058] libata version 3.00 loaded.
    [ 0.733952] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.733959] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.733972] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.737882] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.737904] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb261c000
    [ 0.747112] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.747298] hub 3-0:1.0: USB hub found
    [ 0.747312] hub 3-0:1.0: 2 ports detected
    [ 0.747491] ahci 0000:00:1f.2: version 3.0
    [ 0.747673] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
    [ 0.747695] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.760531] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
    [ 0.760537] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
    [ 0.761117] scsi host0: ahci
    [ 0.761280] scsi host1: ahci
    [ 0.761400] scsi host2: ahci
    [ 0.761527] scsi host3: ahci
    [ 0.761587] ata1: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b100 irq 46
    [ 0.761590] ata2: SATA max UDMA/133 abar m2048@0xb261b000 port 0xb261b180 irq 46
    [ 0.761591] ata3: DUMMY
    [ 0.761592] ata4: DUMMY
    [ 0.763988] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.054094] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.080772] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.090784] usb 1-3: new low-speed USB device number 2 using xhci_hcd
    [ 1.108052] ata1.00: ATA-8: ST500LT012-1DG142, 0002LVM1, max UDMA/133
    [ 1.108057] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.147102] ata1.00: configured for UDMA/133
    [ 1.147357] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 LVM1 PQ: 0 ANSI: 5
    [ 1.178260] hub 3-1:1.0: USB hub found
    [ 1.178324] hub 3-1:1.0: 8 ports detected
    [ 1.267676] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.269353] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.271432] usbcore: registered new interface driver usbhid
    [ 1.271435] usbhid: USB HID core driver
    [ 1.427737] usb 1-6: new high-speed USB device number 3 using xhci_hcd
    [ 1.467751] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.472648] ata2.00: ATAPI: PLDS DVD-RW DA8A5SH, RL61, max UDMA/100
    [ 1.473654] ata2.00: configured for UDMA/100
    [ 1.487478] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8A5SH RL61 PQ: 0 ANSI: 5
    [ 1.506690] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.506695] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.506762] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.506765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.506805] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.526586] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.526589] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.526753] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.576727] sda: sda1 sda2 sda3 sda4
    [ 1.577520] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.668501] tsc: Refined TSC clocksource calibration: 2394.458 MHz
    [ 1.834689] usb 1-7: new full-speed USB device number 4 using xhci_hcd
    [ 1.866481] PM: Starting manual resume from disk
    [ 1.866486] PM: Hibernation image partition 8:2 present
    [ 1.866488] PM: Looking for hibernation image.
    [ 1.866742] PM: Image not found (code -22)
    [ 1.866745] PM: Hibernation image not present or could not be loaded.
    [ 2.008615] usb 1-7: No LPM exit latency info found, disabling LPM.
    [ 2.168326] usb 1-8: new full-speed USB device number 5 using xhci_hcd
    [ 2.200127] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.668929] Switched to clocksource tsc
    [ 2.998993] random: nonblocking pool is initialized
    [ 5.035645] EXT4-fs (sda4): re-mounted. Opts: discard
    [ 7.983617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 8.001442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
    [ 8.001451] ACPI: Power Button [PWRB]
    [ 8.001539] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
    [ 8.001584] ACPI: Lid Switch [LID0]
    [ 8.001677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 8.001681] ACPI: Power Button [PWRF]
    [ 8.067218] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
    [ 8.169733] thermal LNXTHERM:00: registered as thermal_zone0
    [ 8.169739] ACPI: Thermal Zone [TZ00] (29 C)
    [ 8.239918] ACPI: Battery Slot [BAT1] (battery present)
    [ 8.270385] ACPI: AC Adapter [ACAD] (on-line)
    [ 8.341145] [drm] Initialized drm 1.1.0 20060810
    [ 8.435780] ACPI Warning: SystemIO range 0x0000000000006040-0x000000000000605f conflicts with OpRegion 0x0000000000006040-0x000000000000604f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
    [ 8.435788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 8.524972] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
    [ 8.571862] [drm] Memory usable by graphics device = 2048M
    [ 8.571868] checking generic (a0000000 410000) vs hw (a0000000 10000000)
    [ 8.571870] fb: switching to inteldrmfb from EFI VGA
    [ 8.571892] Console: switching to colour dummy device 80x25
    [ 8.571969] [drm] Replacing VGA console driver
    [ 8.590169] i915 0000:00:02.0: irq 48 for MSI/MSI-X
    [ 8.590182] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 8.590184] [drm] Driver supports precise vblank timestamp query.
    [ 8.590211] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 8.648474] fbcon: inteldrmfb (fb0) is primary device
    [ 8.665898] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 8.665971] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
    [ 8.665996] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
    [ 8.789354] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0458:012B.0001/input/input7
    [ 8.789415] hid-generic 0003:0458:012B.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0
    [ 8.812071] media: Linux media interface: v0.10
    [ 8.833777] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 8.840567] Linux video capture interface: v2.00
    [ 8.897231] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0c45:6514)
    [ 8.929823] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input10
    [ 8.929908] usbcore: registered new interface driver uvcvideo
    [ 8.929909] USB Video Class driver (1.1.1)
    [ 9.036891] cfg80211: Calling CRDA to update world regulatory domain
    [ 9.056738] Bluetooth: Core ver 2.19
    [ 9.056751] NET: Registered protocol family 31
    [ 9.056751] Bluetooth: HCI device and connection manager initialized
    [ 9.056757] Bluetooth: HCI socket layer initialized
    [ 9.056758] Bluetooth: L2CAP socket layer initialized
    [ 9.056766] Bluetooth: SCO socket layer initialized
    [ 9.348730] usbcore: registered new interface driver btusb
    [ 9.452303] iTCO_vendor_support: vendor-support=0
    [ 9.452955] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 9.452990] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 9.453081] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 9.494632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 9.494637] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 9.501333] r8169 0000:08:00.0: irq 49 for MSI/MSI-X
    [ 9.501800] r8169 0000:08:00.0 eth0: RTL8168g/8111g at 0xffffc90010788000, f0:76:1c:0c:12:99, XID 10900800 IRQ 49
    [ 9.501802] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 9.582307] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
    [ 9.640127] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 9.640351] rtlwifi: rtlwifi: wireless switch is on
    [ 9.653001] mousedev: PS/2 mouse device common for all mice
    [ 9.667517] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800, board id: 2848, fw id: 1581875
    [ 9.686347] r8169 0000:08:00.0 enp8s0: renamed from eth0
    [ 9.708662] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 9.727739] Console: switching to colour frame buffer device 170x48
    [ 9.730327] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 9.730328] i915 0000:00:02.0: registered panic notifier
    [ 9.737976] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
    [ 9.743445] AVX2 version of gcm_enc/dec engaged.
    [ 9.743448] AES CTR mode by8 optimization enabled
    [ 9.745577] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
    [ 10.040841] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 10.040848] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 10.040851] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 10.040852] sound hdaudioC1D0: mono: mono_out=0x0
    [ 10.040854] sound hdaudioC1D0: inputs:
    [ 10.040857] sound hdaudioC1D0: Mic=0x19
    [ 10.040859] sound hdaudioC1D0: Internal Mic=0x12
    [ 10.046345] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
    [ 10.046446] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
    [ 10.046909] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
    [ 10.047361] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
    [ 10.047575] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
    [ 10.047649] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
    [ 10.097496] rtl8723be 0000:09:00.0 wlp9s0: renamed from wlan0
    [ 10.655545] cfg80211: World regulatory domain updated:
    [ 10.655549] cfg80211: DFS Master region: unset
    [ 10.655550] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 10.655553] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655555] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655559] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655561] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 10.655563] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 10.655564] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [ 10.655566] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [ 10.732705] intel_rapl: Found RAPL domain package
    [ 10.732711] intel_rapl: Found RAPL domain core
    [ 10.732714] intel_rapl: Found RAPL domain uncore
    [ 10.732717] intel_rapl: Found RAPL domain dram
    [ 10.844302] Adding 4009760k swap on /dev/sda2. Priority:-1 extents:1 across:4009760k FS
    [ 13.353211] systemd-journald[146]: Received request to flush runtime journal from PID 1
    [ 18.647280] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 18.647284] Bluetooth: BNEP filters: protocol multicast
    [ 18.647293] Bluetooth: BNEP socket layer initialized
    [ 21.632791] r8169 0000:08:00.0 enp8s0: link down
    [ 83.137005] wlp9s0: authenticate with 00:1d:7e:6a:c4:67
    [ 83.729985] wlp9s0: send auth to 00:1d:7e:6a:c4:67 (try 1/3)
    [ 83.731584] wlp9s0: authenticated
    [ 83.731753] rtl8723be 0000:09:00.0 wlp9s0: disabling HT as WMM/QoS is not supported by the AP
    [ 83.731757] rtl8723be 0000:09:00.0 wlp9s0: disabling VHT as WMM/QoS is not supported by the AP
    [ 83.734174] wlp9s0: associate with 00:1d:7e:6a:c4:67 (try 1/3)
    [ 83.737516] wlp9s0: RX AssocResp from 00:1d:7e:6a:c4:67 (capab=0x411 status=0 aid=3)
    [ 83.737660] wlp9s0: associated
    [astinx@compu ~]$ systemctl status
    ● compu
    State: running
    Jobs: 0 queued
    Failed: 0 units
    Since: dom 2015-02-08 13:47:04 ART; 24min ago
    CGroup: /
    ├─1 /sbin/init
    ├─system.slice
    │ ├─dbus.service
    │ │ └─301 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
    │ ├─org.cups.cupsd.service
    │ │ └─299 /usr/bin/cupsd -l
    │ ├─ModemManager.service
    │ │ └─303 /usr/bin/ModemManager
    │ ├─wpa_supplicant.service
    │ │ └─346 /usr/bin/wpa_supplicant -u
    │ ├─lightdm.service
    │ │ ├─314 /usr/bin/lightdm
    │ │ └─329 /usr/bin/Xorg.bin :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
    │ ├─accounts-daemon.service
    │ │ └─331 /usr/lib/accountsser

    So long I tried as Gusar said to loading the rtl8723b module with those params:
    sudo modprobe rtl8723be fwlps=0
    sudo modprobe rtl8723be ips=0
    So far by now, the connection hasn't dropped (one hour since I made the change)
    But is quite strange that when I do
    [astinx@compu ~]$ more /sys/module/rtl8723be/parameters/ips
    Y
    I mean, the parameters changed or not? I also tried with setting with N instead of 0.
    EDIT:
    The drop downs come back shortly after. I find quite strange that I cannot manage the power from iwconfig
    [astinx@compu ~]$ sudo iwconfig wlp9s0 power off
    [sudo] password for astinx:
    Error for wireless request "Set Power Management" (8B2C) :
    SET failed on device wlp9s0 ; Operation not supported.
    Last edited by astinx (2015-02-08 21:46:47)

  • Mac Mini gets wifi connection for 3 seconds, then drops it.

    Hey all,
    Long time listener, first time caller.
    I'm running a 1.66 Mac Mini with 10.5.4 on it. My wifi network is based on a Comcast broadband connection and is broadcast through an 802.11g Airport Express. Also on the network are: a Macbook (3,1), my iBook G4 (1.33 ghz), my original iPhone, my Tivo, an HP desktop using an 802.11g wireless adapter and occasionally a Wii. All of these have great wifi connections, run fast and connect easily. The wifi is normally WEP ASCII 128 bit encrypted.
    The Mac Mini, however, does not. The Mac Mini has been in several positions near my TV (This is what it uses as a monitor), but in most of these has had an extremely hard time finding the wifi network. This got a bit better after I removed all of it's locations, keychains and such and re-set-up everything. Except it still, whenever it connects, drops the web connection within about 10 seconds on an extremely good day. I'll select my network from the Airport drop down menu, it'll join happily, I'll click a bookmark and the page will load very slowly, get about halfway and then stop. Sometimes it'll just go straight to "You are not connected to the internet. (Network Diagnostics)" When I click network diagnostics, either Airport Settings or ISP has failed, but when I go through the process of trying to repair/diagnose the problem, suddenly they will all be working fine.
    For what it's worth, I took it to the Genius Bar, and it worked amazingly well on the Apple Store Wifi.
    Any thoughts?

    I was having an identical issue with my Mini, and I have an eerily similar mix of devices on my network. Last night I went into my Airport Express configuration and changed the channel that it is broadcasting on (also turned on Interference Robustness) and everything is now working great. By default, my Airport channel was broadcasting on channel 1 - I changed it manually to channel 7, restarted the Airport and that did the trick. All of my macs (including the Mini), tivos and wii are now getting a stronger wireless signal since I changed the channel.

  • Wifi Connection Speed

    Hi everyone,
    I had a thread in the newbie corner about filesharing, however I have now come across an even worse issue.
    It's to do with my wifi speed. I am using netcfg to set up a connection automatically, however I have done the setup manually and it made no difference. The problem is the speed is pretty bad. I plan on using the machine as I download and local fileserver, so wireless speeds of max 100kb/s vs. my Windows' machines 800kb/s is not quite good enough.
    I use the ath9k driver for my TP-Link card, and I have tried disabling power-saving and forcing a higher bitrate, but neither of those solutions work.
    Can anyone assist?

    ewaller wrote:
    Question:  How did you establish that it is 100 kBits/second?  Any chance you are mixing units and comparing 100 kBytes/sec to 800 kBits/sec ?
    What is the output of iwconfig  ?
    I meant 100 kilobytes per second. I got that from getting packages from mirrors, donwloading some torrents, and downloading Big Buck Bunny to test my filesharing. It never got much above 100, whereas on Windows I get 800+.
    Output of iwconfig:
    wlan0 IEEE 802.11bgn ESSID:"wifinetwork"
    Mode:Managed Frequency:2.412 GHz Access Point: 08:76:FF:46:D4:4C
    Bit Rate=54 Mb/s Tx-Power=14 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=62/70 Signal level=-48 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:11346 Missed beacon:0

  • [SOLVED] WiFi connection drops

    Hey guys,
    I'm having some trouble with my WiFi connection lately as it tends to drop the connection every like 2-10 mins.
    It is not directly linked to any specific action, it just happens while browsing the web, watching a video or chatting.
    It's definitely not hardware related either as I do not have any connection losses when running windows on the same laptop (Dell Latitude E4300).
    lspci: 0c:00.0 Network controller: Intel Corporation WiFi Link 5100
    iwconfig: wlan0     IEEE 802.11abgn  ESSID:"****" 
              Mode:Managed  Frequency:2.422 GHz  Access Point: 00:1C:28:1C:D6:8A   
              Bit Rate=54 Mb/s   Tx-Power=15 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Power Management:off
              Link Quality=61/70  Signal level=-49 dBm 
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:14   Missed beacon:0
    Is this some known bug or is anyone else having the same problem? I couldn't find anything specifically similar to my problem on the forums and the rest of the web but maybe you guys know how to fix this?!
    Cheers
    Tobi
    Last edited by zoryfl (2012-02-20 17:32:38)

    masutu wrote:
    You can try out to load the module with
    modprobe iwlwifi 11n_disable=1 swcrypto=1
    or, to make it permanent, create a file /etc/modprobe.d/iwlwifi.conf containing
    #/etc/modprobe.d/iwlwifi.conf
    options iwlwifi 11n_disable=1 swcrypto=1
    That did it for me (i had the same problems: "wlan0: deauthenticating from 00:11:22:33:44:55 by local choice (reason=3)"). Don't know, if both parameters are needed, wasn't patient enough for testing.
    Big maustu! that did the job for me as well.
    This problem may be related to iwlwifi and some adsl routers. Everything was ok for me until we changed internet provider. The new provider (Fastweb, italy). placed their own router. Since then, my connection drops every 15 minutes or so and then it hangs. I have to restart network in order to reconnect.
    I tried disabling networmanager and connecting with wpa_supplicant and wpa_supplicant.conf and fiddling with the file templates but the problem persisted.
    I did pacman -Syu after we got the new router. Just to verify that it is the new router causing the problem I downgraded iwlwifi to previous version and the problem persisted. I didn't bother downgrading the kernel though...
    Booting the same pc with another distro that loads iwlagn everything is ok. Another pc with ubuntu that uses iwl3945 is also fine. The problem seems to be just with iwlwifi, my network card and that f...g router which I have not access to.
    My network card is Intel WiFi Link 5300.
    The logs in case it really is a problem with iwlwifi and someone know how to deal with it.
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): bringing up device.
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> WiFi hardware radio set enabled
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> WiFi now enabled by radio killswitch
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): bringing up device.
    Feb 5 14:34:38 localhost kernel: [ 7642.175703] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    Feb 5 14:34:38 localhost kernel: [ 7642.176099] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: starting -> ready
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
    Feb 5 14:34:38 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: ready -> inactive
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Auto-activating connection 'FASTWEB-1-XqkFmfh2na6e'.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) starting connection 'FASTWEB-1-XqkFmfh2na6e'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0/wireless): access point 'FASTWEB-1-XqkFmfh2na6e' has security, but secrets are required.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0/wireless): connection 'FASTWEB-1-XqkFmfh2na6e' has security, and secrets exist. No new secrets needed.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: added 'ssid' value 'FASTWEB-1-XqkFmfh2na6e'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: added 'scan_ssid' value '1'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: added 'psk' value '<omitted>'
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> Config: set interface ap_scan to 1
    Feb 5 14:34:42 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: inactive -> scanning
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: scanning -> associating
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: associating -> 4-way handshake
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: 4-way handshake -> group handshake
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): supplicant interface state: group handshake -> completed
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'FASTWEB-1-XqkFmfh2na6e'.
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> dhcpcd started with pid 6079
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Beginning IP6 addrconf.
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
    Feb 5 14:34:45 localhost dhcpcd[6079]: version 5.2.12 starting
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
    Feb 5 14:34:45 localhost dhcpcd[6079]: wlan0: rebinding lease of 192.168.1.128
    Feb 5 14:34:45 localhost dhcpcd[6079]: wlan0: acknowledged 192.168.1.128 from 192.168.1.254
    Feb 5 14:34:45 localhost dhcpcd[6079]: wlan0: leased 192.168.1.128 for 1800 seconds
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> address 192.168.1.128
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> prefix 24 (255.255.255.0)
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> gateway 192.168.1.254
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> hostname 'pabhost'
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> nameserver '62.101.93.101'
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> nameserver '83.103.25.250'
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> domain name 'fastwebnet.it'
    Feb 5 14:34:45 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> (wlan0): IP6 addrconf timed out or failed.
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started...
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete.
    Feb 5 14:35:05 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> (wlan0): writing resolv.conf to /usr/sbin/resolvconf
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> Policy set 'FASTWEB-1-XqkFmfh2na6e' (wlan0) as default for IPv4 routing and DNS.
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> Activation (wlan0) successful, device activated.
    Feb 5 14:35:06 localhost NetworkManager[574]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
    Feb 5 14:35:06 localhost dbus[548]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
    Feb 5 14:35:06 localhost dbus[548]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Feb 5 14:49:46 localhost dhcpcd[6079]: wlan0: renewing lease of 192.168.1.128
    Feb 5 14:49:46 localhost dhcpcd[6079]: wlan0: acknowledged 192.168.1.128 from 192.168.1.254
    Feb 5 14:49:46 localhost dhcpcd[6079]: wlan0: leased 192.168.1.128 for 1800 seconds
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> (wlan0): DHCPv4 state changed reboot -> renew
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> address 192.168.1.128
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> prefix 24 (255.255.255.0)
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> gateway 192.168.1.254
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> hostname 'pabhost'
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> nameserver '62.101.93.101'
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> nameserver '83.103.25.250'
    Feb 5 14:49:46 localhost NetworkManager[574]: <info> domain name 'fastwebnet.it'
    Feb 5 14:49:46 localhost dbus[548]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
    Feb 5 14:49:46 localhost dbus[548]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Feb 5 15:04:46 localhost dhcpcd[6079]: wlan0: renewing lease of 192.168.1.128
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): device state change: activated -> unavailable (reason 'none') [100 20 0]
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): deactivating device (reason 'none') [0]
    Feb 5 15:09:57 localhost dhcpcd[6079]: received SIGTERM, stopping
    Feb 5 15:09:57 localhost dhcpcd[6079]: wlan0: removing interface
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 6079
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): removing resolv.conf from /usr/sbin/resolvconf
    Feb 5 15:09:57 localhost dbus[548]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
    Feb 5 15:09:57 localhost dbus[548]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> (wlan0): taking down device.
    Feb 5 15:09:57 localhost kernel: [ 9761.463858] cfg80211: Calling CRDA to update world regulatory domain
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> WiFi hardware radio set disabled
    Feb 5 15:09:57 localhost NetworkManager[574]: <info> WiFi now disabled by radio killswitch
    Feb 5 15:09:57 localhost NetworkManager[574]: <warn> (pid 6079) unhandled DHCP event for interface wlan0

  • Yoga 8 and 10 Tablets - KitKat 4.4.2 - Wifi Connection and Notification

    After upgrading to KitKat 4.4.2, some customers report that sometimes after device awakes from sleep, the Wifi connection does not resume on their Yoga 8 or 10 tablets (B6000-F/H or B8000-F/H). Also, Notifications may not show the name of the connection.
    Please note that Lenovo has escalated internally on this issue. I was personally able to reproduce the Wifi Notification not showing the name of the wifi connection.
    These reports originated from this thread: http://forums.lenovo.com/t5/Idea-Android-based-Tablets/KitKat-roll-out-for-Yoga-Tablets-starting-Jun...
    The original thread will be closed when new threads have been opened by type of issue to assist in reporting and resolution. My personal thanks to the forums members who provided feedback to help identify post-upgrade symptoms.
    Thank you for your patience,
    Amy Tupper
    Technical Resolution Lead, Pervasive Issues
    Lenovo US
    ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
    First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
    Solved!
    Go to Solution.

    I can say that the wifi had not yet been fixed.   My tablet was created after the dates listed for you reported updates.   Mine was delivered in the first week of April 2015, and still had hasn't ups after sleep and wifi problems where it randomly drops the connection.   Can't tell when the connection has been dropped since the tablet still shows that it's connected.  
    Please see the link below for some of us that have come together with the same problems.   We all can't have crappy Internet (especially sebum we have other devices connected that are solid) .   You've responded to one person in the link,  the originator,  but it would be nice to see some response to the remainder of the thread.  Everyone is getting to where they want to return their tablets and I'm sure you don't want to lose the money and reputation. 
    https://forums.lenovo.com/t5/Android-Yoga-Series-Tablets/Yoga-Tablet-2-8-830-Freezing-After-Sleep-Mo...

  • Windows 7 desktop drops WIFI connection

    Hi -
    I seem to see a lot of posts with this same problem, but no solution that's relevant to me.  I have a DLink DIR 655 router that has the latest firmware installed (I updated it yesterday). One of the machines on my wireless network is having problems. 
    Two Microsoft Surfaces, three Windows phones, and one Canon WIFI printer all work fine, its only a desktop that uses a USB Wireless card that has the problem.  I am currently using a Medialink MWNUSB150N wireless card.  Note, however, that I had
    exactly the same problems with a DLink wireless card.
    The problem is that the WIFI connection drops frequently.  The systray will indicate that I am connected to the wireless network with internet access.  Then I will notice that web pages are not loading, but it will still show that I am connected
    to the WIFI network and the internet.  After a short time, the systray will show that I am connected to the network, but have no internet access.  After some more time it will show that I am not connected, but will usually show that connections
    are available.  When I try to reconnect (my SSID shows as available at this point), then I get an error saying no network is available.  At this point, my SSID no longer shows as available.  I've run the troubleshooter probably 100 times over
    the course of several months.  It never helps.  Rebooting sometimes helps.  Sometimes it seems like I need to do a voo doo dance to get the connection back.  Following is the result of running netsh wlan show driver.
    Any ideas?
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Users\Dennis>netsh wlan show driver
    Interface name: Wireless Network Connection
        Driver                    : 802.11 USB Wireless LAN Card
        Vendor                    : Ralink Technology, Corp.
        Provider                  : Microsoft
        Date                      : 2/26/2009
        Version                   : 3.0.0.61
        INF file                  : C:\Windows\INF\netr28ux.inf
        Files                     : 2 total
                                    C:\Windows\system32\DRIVERS\netr28ux.sys
                                    C:\Windows\system32\drivers\vwifibus.sys
        Type                      : Native Wi-Fi Driver
        Radio types supported     : 802.11b 802.11g 802.11n
        FIPS 140-2 mode supported : Yes
        Hosted network supported  : Yes
        Authentication and cipher supported in infrastructure mode:
                                    Open           
    None
                                    Open           
    WEP-40bit
                                    Open           
    WEP-104bit
                                    Open           
    WEP
                                    Shared          WEP-40bit
                                    Shared          WEP-104bit
                                    Shared          WEP
                                    WPA-Enterprise  TKIP
                                    WPA-Enterprise  CCMP
                                    WPA-Personal    TKIP
                                    WPA-Personal    CCMP
                                    WPA2-Enterprise TKIP
                                    WPA2-Enterprise CCMP
                                    WPA2-Personal   TKIP
                                    WPA2-Personal   CCMP
        Authentication and cipher supported in ad-hoc mode:
                                    Open           
    None
                                    Open           
    WEP-40bit
                                    Open           
    WEP-104bit
                                    Open           
    WEP
                                    WPA2-Personal   CCMP

    Thanks Cody! 
    Questions: 
    Regarding your advice to check the wireless security settings - I don't know exactly what to do.  I went into the router admin page and checked the wireless security - its set to "WPA-Personal". Other than that, I don't know how to tell if
    its using TKIP or not.
    The next time it fails, I will try your suggestion to remove the network and reconnect.  I can't remember if I tried that at some point, so I'll give it a shot.  I'm waiting for it to fail right now as I tried something yesterday that I think has
    a low chance of success, and it hasn't failed yet.  I noticed that the option to "allow Windows to turn off this device to save power" was checked for the wireless adapter, so I unchecked that value.  I only think it has a low chance of
    success, since the timing of the shutdowns was pretty random and did not "smell" like a power saving thing, but thus far it hasn't failed.  I'm still within the window of randomness, though.  Sometimes it works for a little over a day and
    sometimes it fails after less than 5 minutes, so I'm just keeping my fingers crossed for the moment.
    Comments:
    Tried using different USB ports, USB 2.0 and USB 3.0, and front panel vs. real panel just in case there was anything weird going on.  No difference.
    Updated the driver using the "update driver" button.  Windows believes I have the best driver installed. I did look for other versions, didn't find anything.
    Dennis

  • When I bootup my Macbook my family's PCs  wifi connections stop working !

    Hi everybody, when my nephew boots up his Macbook (Snow Leopard 10.6.5) he can regularly surf the web through a wireless router. However the wifi connection on other devices (Windows Vista notebook PCs, Linux Pcs, Windows 2000 PC, Playstation 3 wireless, PSP, Xbox ecc.) stops working. When he shuts off his Macbook, wifi connection on Windows/Linux PCs etc. starts to work again.
    I've had similar issues only with a wireless TV signal transmitter (working at 2.54 GHZ). When it is on, wifi connection is impossible, no matter what channel is selected (it has 4 channels).
    What to do with my nephew's Macbook? I can see that every 10 seconds Airport is searching for wireless signals (the wifi led on the router blinks), but no other traffic is sent/received so I don't think it's a bandwidth problem.
    Can Airport be shut off and can I connect to wifi router without airport using other apps or using a terminal (console) application (I use Linux and many commands are the same, i.e " iwconfig - ifconfig ")?
    Maybe it's the transmitting power of MAcbook wifi device (too strong?). Can it be modified? I'm not a Mac guru... In linux there is a command, say "iwconfig wifi0 txpower 20mW " to tell the wifi driver to use 20 mW transmitting power on wifi0 device. In that Macbook the wifi device is called "en1"...
    Many thanks in advance for good ideas..!

    Many thanks for such a fast answer!
    @ a brody
    I have so many wifi devices (at least 17) I don't want to create a MAC address filtering rule for each one of them! I don't ever know if my router can accept filters on so many MAC addresses!! But I will try out your suggestion if I can't solve in other way.. Thank you!
    @ J D McIninch
    Thank you, I will try... However, my router don't need to be restarted to get online again: when my nephew shuts off his Macbook the wifi connection is all ok. How could it be that a routing table gets corrupted when the Macbook is on, and that very same routing table gets repaired as soon as the Macbook is shut down? I'm sure, however, my router is a pre-N one ( Belkin modem/router bought in 2004, 802.11 b/g 54Mb with 125Mb turbo mode feature always turned off for backward wifi compatibility)
    Thanks

Maybe you are looking for

  • Please help -can't uninstall or install iTunes  - Error code 2330

    I tried to open up iTunes 9.1.1 today and got a message that windows was trying to configure iTunes. Midway through, i got an error message: "An error occurred while attempting to create directory: C:\documents and settings\all users\application data

  • NCS 2.1.1 - strange behavior with wired clients

    Hello guys!  I have a problem regarding the NCS 2.1.1. I have the NCS 2.1.1 connected with the ISE 1.2.1 patch 1. and have a handful of switches configured into the ncs.  If a client connects, with 802.1x port security the ncs takes AGES to register

  • Connection Pooling in a JAAS Provider

    What is the recommended way of doing resource pooling inside of a JAAS provider? I'm trying to use a DataSource inside of my providers (my realm uses an Oracle database), but, of course, WebLogic want's to check access for the DataSource => infinite

  • T510 Screen resolutions error?

    To my knowledge, the screen resolution of 15,6" models should be as follows: HD: 1366 x 768 HD+: 1600 x 900 FHD: 1920 x 1080 Then why on European Lenovo websites all T510 models are listed as 15.6 " HD+ AntiGlare 1366x768 ?? Here is Italy, Germany an

  • Copied query running indefinitely.

    Dear All, I am facing a strange issue. I have a query say A. On execution of the query it works fine and displays the results. When I save this query as B and execute it, it does not display any result. The query executes indefinitely. In SM50 the st