E72 won't turn on after update

Hi all. Tonight I did a sync and was informed of a phone software update.
Done a few of these now on my E72 so thought it would be plain sailing. Wrong. The process obviously froze, I gave it plenty of time. The screen said if necessary remove battery etc and reconnect USB lead which is what I did.
The phone is now dead other than vibrating as you turn it on. I've tried a hard reset by holding shift, space and backspace while powering up but nothing (other than the vibrate).
I take it I have a pile of junk now? Anything else I can try?
Not too happy at the minute as my last phone was an N97, so am on the edge!
Thanks in advance,
Mike.

Got the same issue here, I was updating my E72 phone connected to my laptop then it gives a notifications like "installing new Nokia ROM.. Fail" after that my laptop just crashed.
After booting up, here's the information from event viewer.
Windows Logs (System):
"The Windows Installer service entered the running state."
"Driver Management has concluded the process to add Service nmwcdnsux64 for Device Instance ID USB\VID_0421&PID_0106\6&3CDD1B6&0&2 with the following status: 0."
"Driver Management concluded the process to install driver FileRepository\nmwcdnsux64.inf_amd64_neutral_8e26c7ce86db0581\nmwcdnsux64.inf for Device Instance ID USB\VID_0421&PID_0106\6&3CDD1B6&0&2 with the following status: 0x0."
"Driver Management has concluded the process to add Service nmwcdnsucx64 for Device Instance ID NMWCD\VID_0421&PID_0106&IF_OTH\7&F32066B&0&00 with the following status: 0."
"Driver Management concluded the process to install driver FileRepository\nmwcdnsucx64.inf_amd64_neutral_a68d3697987a166d\nmwcdnsucx64.inf for Device Instance ID NMWCD\VID_0421&PID_0106&IF_OTH\7&F32066B&0&00 with the following status: 0x0."
Windows Logs (Application):
"The description for Event ID 1 from source Nokia M Platform cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Nokia M Platform 2.7.44 (NLib 0.8.713)
NokiaMServer: Started (precheck)
the message resource is present but the message is not found in the string/message table"
"The description for Event ID 1 from source Nokia M Platform cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Nokia M Platform 2.7.44 (NLib 0.8.713)
Nokia M Data Store opened at location "c:\users\jrt\appdata\local\nokia\nokiad~1\DataBase\MDataStore.db3"
the message resource is present but the message is not found in the string/message table"
I'm using Windows 7 64-bit Professional.
Code: 0587035
JT

Similar Messages

Mac 10.6 won't turn off after update

Macbook air a1304 won't turn off after updating unless you push on/off button.

Phone your nearest HP Support to request warranty service. Worldwide contact info can be accessed here>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My iPod touch 5th gen won't turn on after updating to iOS 8 using the computer,help!?

On my computer (using windows) I tried to update my iPod touch 5th gen to iOS 8 using iTunes, using this website http://www.gottabemobile.com/2014/09/17/the-secret-to-skipping-long-ios-8-downlo ads-and-problems/ as a guide.
It kept coming up with this error http://support.apple.com/en-us/HT201442 after the update.
Now my iPod won't turn on and it shows the charger with the lightening with an arrow above it pointing to the iTunes logo.
So i plugged it into iTunes but i don't know what i'm supposed to do, any help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Q10 Won't Turn On After Update

I am currently on Windows Phone and wanted to try Blackberry 10 as I am fan of my old Blackberry. I wanted to try it out cheap so I bought a Q10 on Ebay for $50 even though the seller said the phone had a water damaged sticker thinking I could fix it. I also bought a brand new battery from Amazon to go with it.
So my issue is when I got the phone, it was having trouble connecting to Link and reloading the OS would fail due to connection loss, so I nuked the phone with a program to clear the phone. I also soaked the phone in isopropyl alcohol after reading that soaking it could get rid of mineral deposits on water damaged phones. After the nuke and clean, the phone does the two quick blinking red lights which (I think) means the phone has no OS on it which is what I wanted after the nuke.
So, I plug the phone into the computer and Link recognizes it as a Q10. I have BB OS 10.2 downloaded and went to reload it. It completes the update all the way with a green LED on the whole time it is updating. When Link says to unplug the phone to let it reboot, the phone does nothing. Holding down power for any length of time can't turn on the phone. Plugging the phone into a wall charger causes the orange charging LED to flash on like it's going to start charging before quickly turning to a red LED while it stays plugged in.
I nuked the phone and tried Autoloader which does the same thing in the end as the phone won't turn on when it unplugs from the computer after updating. Seeing as how the phone is recognized by Link, seems to update correctly with the green LED on, and can be nuked fine, is there any way I can get this phone to work? It seems as though the battery isn't charging because once I unplug from the computer / wall, nothing seems to do anything and the LED doesn't flash. It is a new battery, so could the water have caused an issue on the circuit board which is not letting the battery charge?
Any help is appreciated, and I am willing to try pretty much anything and have decent knowledge of software / hardware. I have done tons of searching for similar issues to no success, but have not found this exact problem. Thanks in advance for any help!

OK, you bought a new battery which I would recommend, and it still is NOT charging or powering on.
You've done this already >> Make sure you let it charge with the wall outlet charger for several hours and then with it still connected to the wall outlet charger, remove the battery and reinsert... what happens?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to restore my iphone 5 that won't turn on after updating to iOS 7.0.2

I have my iphone 5 and recently tried to update to the new iOS 7.0.2 but it appears to have frozen with a black screen as the background and an apple with a little progress bar. My lock screen is broken and so there is no way to hold the home button and lock screen at the same time to attempt to reset it. Is there any other way to restore my iphone. Please i'm so worried about it, it has been in this freeze for over 4 hours!!

screen won't turning on

IPhone won't turn on after update

I tried to do an update on my iPhone4 and now the phone won't turn back on and iTunes isn't saying that it's in recovery mode.

I have already tried that, and it just comes back to the screeen that says I need to connect to iTunes, which I am.

IPad won't turn on after update to ios7

After updating to ios7 on my iPad, it would keep resetting itself and show the apple logo until finally starting up. Over a few days this got worse and worse and eventually stopped working where I would have to hold the home and on/off buttons to reset it. I have now reached a point where it no longer starts up. Having went to an apple store they say they can't identify the issue as they can't start it up and offered me to pay £199 to have it replaced (how very nice of them). I have had online chats with an advisor and a senior advisor who have diagnosed this as a 'hardware' issue!!!
Guess what apple, no it is not, this is a result of the updgrade to ios7!!! My iPad worked perfect before and I will not be paying £199 to replace it!!!
If anybody else has had similar problems please let me know.
Thanks.

Try this reset ...
Tap Settings > General > Reset > Reset All Settings
If that doesn't help, restore the iPad > Tunes: Restoring iOS software

My iPhone 4s won't turn on after update

SO tried to update my phone new software and it went black and did not turn on then it started buzzing and now the screen is blue.

my q is same as u. after upgrade ******* ios 8.2 my 4s stuck in recovery mode. every time i connect to itune(my pc) it say it must restore. and i try that 20 time. (when restoring)every time it show apple logo with loading sign, when loading complete, restart, then same before and itune say restore. what is the problem. it was not jailbroken. what should i do......no apple store in my country available

Ideapad U410 no main hard drive, won't turn on after updates.

Hi,
I just imported an Ideapad u410 from the US to the UK. It turned on fine, I started noticing the wifi proglem everyone else are having. No big deal, got a usb wifi adapter laying around I can use. Then I noticed that the hard drive (C, no other harddrive visible) was rediculously small (20-30 some GB, I forgot the exact figure) with almost all of it's space used. I figured this was a partition for the OS and that for whatever reason the rest of the drive wasn't showing. I noticed the windows update icon showing on the shutdown button and figured perhaps setup wasnt complete so I pressed restart. It kept restarting, downloading more updates and restarting, I walked away to have dinner when it proclaimed it would now install update 1 of 96. When I came back the laptop was off. I turned it on to be met by an endless cycle of BSOD during startup followed by a failed startup repair... I guess there wasn't enough space on the C drive for the windows update. What do I do now?
Solved!
Go to Solution.

What os do you have? The main problem is the one key recovery, so if not interested it should be similar to the ordinary installation if there are no cache ssd installed.

My phone won't turn on after updating ios 6.1

I've updated ios 6.1. The phone went off durign the night (it had 60% battery).
Now it only turns on plugged to the wall socket (not if I plug it to the USB port) and it shows the "iOS 6 Configuration" screen, telling me to connect to iTunes, but if I unplug it to connect to the USB, it turns off.
If I plug it to the USB, it keeps showing the little apple, and turns off, again and again. It never gets to the same screen of the "iOS 6 configuration".
I can´t seem to turn it on with de DFU mode plugged to the computer.

Hi elmauki,
Error 21
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 1602
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
See http://support.apple.com/kb/TS3694 for more information on Error codes when restoring software using iTunes.

Won't turn on after update

Hi,
I just tried to do an update of 5 things. Stupid me doesn't know what they were except for an itunes update. Now my computer is trying to restart but won't! It goes to the apple screen and then restarts and this is all it does. Does anyone have any idea on what to do??? Please help!

You may be able to get it to go past that step by holding down the
Shift key on startup; and continue holding until you get a login
screen and it should say something about SafeBoot in a window.
If you can get this far, and get a desktop screen, find and use
Disk Utility's 'repair disk permissions' and note the repaired list
of permissions; it should have several. And run the repair again.
May as well; if you get this far. Then quit Disk Utility, and restart.
(You can use GO in the Finder desktop as a shortcut to go to
the Utilities folder, where Disk Utility is located.)
Another option, should the above not work, would be to get your
OS X Installer Disc and see about booting the computer from that.
And use the Disk Utility version on that disc; available prior to any
launch of the Installer itself, is a menu bar in the top of the Installer
to choose other options. Disk Utility is among options in a drop-down
menu beneath the Installer's header menubar. Do not launch Installer.
You can 'repair disk' as well as 'repair disk permissions' from this version
of Disk Utility in the installer; among other things more drastic, irreversible.
Be sure to use the Installer disc of the OS version now in use; should you
have upgraded to a new OSX, use that. Don't use an older boot installer.
When done running Disk Utility's tools (first aid components) you can quit
D.U. and then look back into the Installer's drop-down menubar and find
Startup Disk, to choose to boot the computer from its hard disk drive OS.
{The look, feel, and some names of things may be different in Leopard 10.5
than in Tiger 10.4.11; but the actual tools and procedures are similar. See
or search Apple Support's database for exact documents if in doubt.}
Good luck & happy computing!
edited.

My Ipad air won't turn on after the new IOS7 update

my Ipad Air won't turn on after updating to the new IOS 7.1.1. It ask me for my password I put it in, the apple logo appear and then it want off now it won't come back on. need help please

Did you try this?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

HT1222 iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

P.S. I just noticed; when I hold the power and home button at the same time while it's plugged in as if I was going to restart it, my computer acts as if I'd plugged it in again (it makes the USB notification sound, itunes opens up again, I get the same "your iphone is in recovery mode" message, etc.), but that's the only response I've been able to get from pressing anything on the iphone. thanks again.

Iphone 5s won't turn on after the update

iphone 5s won't turn on after downloaded recent update

Hey lillyluv2010!
Here is an article for you that will help you troubleshoot this issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

My iphone won't turn on after recent update

My iphone won't turn on after recent update. How do I fix this?

2 more options:
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

E72 won't turn on after update

Similar Messages

Maybe you are looking for