E73 Compatibility with iSync and Nokia Multimedia ...

Just switched from an N95 to a E73 and can't get my Mac to sync with the phone. Are there updates available or planned?

I am having the same problem. My E73 is unlocked (purchased from ebay). The phone works well in every other respect but I cannot get iSync to recognize it, nor can I get the plug-in from Nova Media to recognize it. I'm now wondering if there is something about the unlocking process that is preventing the kind of bluetooth connection iSync needs.
If anyone has info., please reply. I have been investigating and working on this for over a week. If I cannot sync my data, I'll have to get rid of this phone.
I've attached a picture of what Nova Media's application says. As you can see, my Mac won't even provide the right icon for the E73, whereas it does for the E71 and E7. (I've sold the E71 and returned the E7, so I can't use them).
Attachments:
Unsupported Nokia E73 - Nokia's isync plugin.png ‏31 KB
Unsupported Nokia E73-nova media plugin.png ‏104 KB

Similar Messages

  • Mac issues with iSync and N95

    I have just upgraded to an N95. I run an iMac with OSX 10.4.11 & iSync 2.4 and have installed the Nokia iSync plugin (and the Multimedia Transfer software. I have no SD or SDHC card installed in the N95.
    I connect the N95 in PC Suite mode as recommended.
    When I click Sync Devices in iSync, contacts are transferred from the N95 to the Mac, but not from the Mac to the N95. This occurs using both the "Merge data..." and "Erase data..." settings in iSync.
    As my old phone (Sony Ericsson K800i) and the N95 are not Bluetooth compatible (when are manufacturers going to sort that one out), I have transferred contacts from the K800i to the Mac and want to get them onto the N95 without doing them one by one via Bluetooth on the Mac.
    Any help would be greatly appreciated.
    Nokia N95-1, 3 network
    iMac Intel Core Duo, OSX 10.4.11
    iSync v2.4 with Nokia N95 isync plugin
    Nokia Multimedia Transfer v1.2

    Hi jollyon!
    Sometimes the iSync setup gets a little confused, sometimes there is some problem with the system. Same steps apply for problems with iCal.
    Your combination should work perfeclty.
    So there are some things to try:
    0.) MAKE A BACKUP OF YOUR ADRESS - BOOK. Adress Book -> Make Backup.
    1.) The usual:
    - remove the BT pairing in System Settings -> Bluetooth/Devices and o your phone (Menu/connections/BT/devices)
    - repair disk permissions with Hard Disk Utility
    - re - pair phone and Mac.
    If that does not cure your problem, try resetting the Sync - log. iSync -> Settings - Reset Sync Log (do not know the english word for ist...)
    If that does not work, create a new group in Adress Book, Quit and restart iSync, klick on your device and look under the Adress - Popup, if your new group is there.
    If so, maybe your contacts database is corrupted. Select all contacts, drag them to the Desktop. Warning: If you have groups, you will loose them! (Not the contacts, only the association with the groups)
    Quit AddressBook.
    Go to: Users/Your user/Library/Application support/AddressBook, copy all the files to your desktop.
    Restart AddressBook. Drag teh exported contacts back to the AddressBook - window.
    If the new group/calender do not appear in the iSync - prefs,
    Quit iSync
    Goto Users/Your user/Library/Application support/iSync/ and drag the SyncLocalCopy to your Desktop
    Restart iSync.
    That schould do the trick...
    Happy digging...
    wok4
    macbookpro:~$: mount /dev/head/brain/

  • Events in iCal doubled after use of iSync and Nokia 6300

    Hi,
    I’ve got a problem with the sync though iSync of the Nokia 6300 and iCal on my Mac – a problem which might be related to the imported phoneplugin – but I really don’t think so, as other users doesn't seem to have any problems with this phoneplugin:
    http://nokia6300.net/3/isync-and-nokia-6300
    The story goes like this:
    During sync with iSync somehow over 505 of the events are doubled in both iCal on my PowerBook G4 with OS X 10.4. AND in the calender of Nokia 6300. If I sync three times an event is tripled in both iCal and phone etc. It seems like iCal doen’t want to obey the phone during sync – and I always use the phone as my primary source – as far as I know, anyway. iCal is thus used as a backup.
    And there is another curious thing going on:
    I’ve created my own calender in iCal. Even though I subscribe to Holidays and Weeknumbers in iCal, they are turn of during sync with iSync. But still they emerge in the calender of my Nokia 6300 after sync. As far as I can see, the setup is correct.
    If anyone knows how to deal with these issues, I’d be must greatful, as deleting all these extra events in the phone and iCal after each sync is both rather irritating and terrible time consuming.
    PowerBook G4 1.25 GHz   Mac OS X (10.4.9)   2 GB RAM

    OK, I've found the answer. I've used the plugin found here (in my case the one for iSync 2.4):
    http://www.s60themes.co.uk/
    - and it works wonderful. Nokia 6300, iSync and iCal now plays together like a sweet dream!
    PowerBook G4 1.25 GHz   Mac OS X (10.4.7)   2 GB RAM

  • Lenovo Wireless Headset W770 compatibility with Linux and Mac

    Hi,  
    Can someone provide me information on Lenovo Wireless Headset W770 compatibility with Linux and Mac distributions.  On the product overview page under Software Requirements, only Windows is mentioned.  http://support.lenovo.com/en_US/downloads/detail.page?submit=true&componentID=1343112653906&DocID=PD...
    Please let me know if the headset can work with other distributions as well. 
    Thanks & Regards,
    Keya
    Solved!
    Go to Solution.

    I just received W770 and tried it on a PC and it worked. But when I plug the USB receiver in a macbook air (2011 MAC OS 10.6.8), it didn't work. The message I got is that MAC can't recognize the "keyboard" and asked me to press the shift button on the unrecognized keyboard- which I guess meant that the MAC treated the USB dongle as if it were a wireless keyboard of some sort. Anyway, would appreciate it if you could let me know how to make it work on MAC. The previous statement saying that it would work on any Lenovo machine regardless of OS is kinda of unclear - do you mean that it would also work on lenovo running MAC OS (is there any Lenovo running Mac OS?). Thanks.

  • N8 AND NOKIA MULTIMEDIA TRANSFER

    I was unable to connect my N8 with NMT. As per support webpage it is supportedby Nokia Multmedia Transfer for mac.http://europe.nokia.com/support/download-software/nokia-multimedia-transfer/download.
    This is what you need to do if you have problem to connect N8 & NMT:
    1. Connect the device to Mac
    2. Launch NMT from the menu bar.
    3. Click tools and settings and then check for updates. It will download the device profile for N8.
    4. Then quit NMT and disconnect the device.
    5. Connec the device and lauch NMT. It should be connected now.
    If its not showing any message that new device profile has been updated, then you can download the N8 device profile manually.
    Go to https://www.nmtapp.com/profiles-14/n8.profile
    This should offer to pull down the profile manually
    Then save this file HDD/Library/Application Support/Nokia Multimedia Transfer/Profiles/
    Hopefully this helps
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

    Since this is a user-user board, I don´t think anybody will be able to tell you when an update is coming out...
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • Problems with isync and itunse and ical

    Hello,
    i can't sync my ical Calendar with my new ipod with itunes and with isync for my Nokia.
    When I select in isync die Calendar, an Dialog shows: "Es wurde kein beschreibbarer Kalender gefunden".
    In itunes it shows: "Kein Kalender vorhanden".
    I use actualy Leopard. In ical all shows fine, in MenuCalenderClock too.
    Any Ideas?
    Regards Ulrich

    this worked for me:
    1) exporting all my calenders one by one (NOT making one backup for all calenders by "sicherungskopie")
    2) closing calendar & calendar related apps
    3) clearing the calender cache (user/library/cache/ical)
    4) deleting the calender plist (com.apple.ical.plist --> found in users/library/preferences)
    5) log out & log in
    6) creating new calenders (previous names are allowed)
    7) importing the old calenders from the export-files
    8) opening isync/ituns

  • Isync and nokia 6102i what are my options?

    trying to sync to cell phone. found out can not use my cell and I sync. Now the really funny part......... I already deleted ALL the contacts from my cell phone. hehehehehe.... fact of my life. but i do have backup on pc. just hate to go backwards.
    what are my options to get address book to sync to nokia 6102i.
    thank you.

    Hi there...
    Ok, i will try to help. I think you are backed up using the address book and im fairly sure you can use isync to get the contacts back on to your phone. If you go into the address book and go to preferences and tick the synchronize with exchange box and then configure it. Then go to isync and try syncing devices...Im pretty sure this should work. Good Luck!!

  • Problem with iTunes compatability with iMovie and iPhoto

    I purchased some music from the iTunes music store and wanted to use that music in a homemade DVD I made. I also have tried using the purchased music when I play a slideshow in iPhoto. In both instances, an error window popped up saying that I needed to launch iTunes and authorize the computer to play the song... Well I bougth the music on the same computer and it is authorized. I typed in the authorization anyways and then after that iMovie and iPhoto both pop up with an error saying that it can't use the file.
    Thinking it might just be one song file... I have tried this with many purchased song. I have had the same problem with all of the purchased songs I've tried.
    Are some purchased songs not compatable with the iLife applications? How can I fix this problem? I'm running iLife 05 and I have installed all of the updates, including the most recent...
    iTunes 6.0.2
    iPhoto 5.0.4
    iMovie HD 5.0.2

    Do you need to update Quicktime as well?

  • My syncron with isync and sony erikson k700i failes

    Hey...
    I just got at k700i and in the beginning i worked fine with isync but then suddently i startet to fail every time i tryed... I dont think I have changen any thing but the name of the phone... Do anybody know what there can be wrong?
    The computer write:
    [MH-Phone] Connection to the phone failed.
    Please make sure that your phone is turned on. If this error occurs again, please restart your phone.
    Device "MH-Phone" synchronization failed
    The phone write:
    session failed
    communication got disconnected
    I really hope some one can help...

    This is a known problem with iSync 2.2 and has been the subject of a number of threads on here already.
    A possible solution is here:
    http://mobile.feisar.com/k700isync22hack.html
    BE WARNED, that this is a hack, and requires direct editing of files within the iSync application. DO NOT attempt this hack if you are not at all competent in doing so. It is very possible to break iSync if you are not careful.
    If you decide to proceed, make sure you do adequate backups before starting. Then read ALL the instructions VERY carefully and fully a couple of times before going ahead.

  • Project Server 2010 compatibility with IE11 and Windows 8.1

    Hi All!
    Maybe a silly question since compatibility is always asked about older versions, but here is my question:
    Is Project Server 2010 compatible with IE11 and Windows 8.1?
    I personnaly tested with IE11 and it seems to be ok. All views and pages can be opened with IE11.
    But what about windows 8.1? 
    Has Microsoft done any communication about this?
    Thanks in advance for your helps.
    Guillaume.
    Guillaume Rouyre - MBA, MCP, MCTS

    I am seeing a minor issue with the timesheet grid after users are upgraded from IE8 to IE11.
    We are using Project Server 2010 with SP1 and Oct 2013 CU.
    When some users (using IE11) switches between filters or views in the Timesheet page, the grid shrinks making to content un readable.  The only way to get it back is to refresh the page. After a refresh, the grid returns to normal size, but the pane
    divider is too far to the left and always must be dragged to the right in order to see the task names in the left grid. 

  • Sprint Phone compatable with Isync

    I need to get a new phone and we use Sprint. Would like to get a phone that I can sync with Ical and address book but don't really need email/web capabilities...any suggestions?
    Thanks,
    Hagen

    You can get the list of devices compatible with iSync by following the link from this page: http://www.apple.com/macosx/features/isync/
    Note that some networks - I believe Sprint is one - both rename/renumber devices and have capability deliberately crippled so ensure you make it clear when purchasing that you want to use it with iSync so that you can return if it fails to do so.

  • BasicTx and BasicRx daughter boards compatibility with USRP2920 and LabView

    I want to know that BasicTx and Basic Rx daughter boards from Ettus research are compatible with USRP2920 and Labview or not.
    Also do these boards supports variable gain or not? Please confirm 
    Thanks
    JK
    Solved!
    Go to Solution.

    They will work but you need to use property nodes to configure them. Ther is no LO so ther is no center frequency parameter. I and Q are separate channels so you will need to break them apart and treat them as such. There is no gain because the boards essentially provide access to the ADC.

  • VNC tool compatibility with WinCE and Windows Embedded Compact 2013 operating systems

    What are all the VNC tools that are compatible with WinCE and Windows Embedded Compact 2013 operating systems or are there any RDP solutions available?
    I am looking for a common VNC tool which is compatible on both the operating systems?

    This forum is for POSREady. Please try one of the Windows CE forums:
    http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact
    Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com

  • Help! New to Mac - compatability with DVI and JVC HDTV

    Hope someone can help. I'm new to mac and have just bought a mac mini and a JVC LT32DS HDTV to use as a media centre. I've scanned through the hundreds of postings on the DVI problem with the mac and would like an idiots guide (literally!)as how to set the mini to work with the JVC TV.
    Following the advice I've got the two working witha VGA connection but once I use the DVI/HDMI (profigold)cable the screen is not stable and keeps flashing in and out view. I've tried various resolution settings but get no stability. I've read about Switch Res X but don't really know if this is the right way to go.

    I went to "Mediamarkt" and tried two Philips HDTVs
    1) 26PF5320
    2) 26PF9320
    TV 1) had no problem accepting the DVI signal from the mini at all the native resolutions I tried (no extra software). TV 2) -- originally my favoured one -- had a barely noticeable overscan on the menubar.
    So I bought the 26PF5320: a bit cheaper but also higher native resolution.
    So it pays to compare even similar models. Retailers will understand the situation. However, it's important to go on a slow day -- not on Saturday -- and maybe hurry up before Christmas. Understandably they don't want to spend too much time on demonstrations when the store is full of potential customers.
    The young man from the store was very impressed with the mini. Less impressed with Quicktime and that you have to pay to get a full-screen video. But that's another story.
    I was able to carry the TV and the mini (the latter in a backpack) from the store to the tram and then from the tram stop to home. Just two year ago this would have been science-fiction.
    I will try to collect more data on HDTV/mini matches and mismatches and maybe put it in an ASCII table for a start.
    iMac G4, Dual G4, mini, Xserves G5    

  • Best format for external HDD for compatibility with Windows and Mac?

    I have a couple of USB HDDs formatted as MS-DOS (FAT32)  which I use on both my iMac and Toshiba laptop  . 
    This week I discovered that I could have used  exFAT  which would have avoided the 4GB file limitation.
    Apart from this, are there any other pros or cons associated with  exFAT  and would it be advisable to use this formatting in future?

    I am cross using extern HDD and USB Stick's. Win7 64 and OSX 10.9. I had the best results when i format the drive with OSX (best cluster size by automatic). I am using small 16GB USB Stick's and large 2TB HDD.
    Some Windows Programs does not work if they are not installed on NTFS and you also have no security on both systems in filesystem because exFat has no security. Could be also a bad idea to use a exFat drive for iPhoto Library but not tested.
    I use exFat for Data like Music, Pictures, and Movies. To share home made things with friends and family.
    If you use "active" Files like programs or databases use the "OS Native" filesystem, you have less problems :-)

Maybe you are looking for