E75 110.48.125 + BH 703 = cannot establish bluetoo...

Hello. My E75 110.48.125 does not want to work with my beloved BH-703 headset. I had no problem with E65.
I can authorize both E75 and the headset but after a while my handy shows only "cannot establish bluetooth connection". I find it annoying, and at the same time I do not understand why BH-703 is a "dedicated accessory" to E75 (in line with nokia.com).
Any ideas?
PS. E75 bluetooth connection with my hp pavilion works fine.
Regards
barti
Message Edited by barti_g on 11-Nov-2009 06:58 PM

Hi barti_g,
it looks like you are sharing my experience very closely: same previous phone (E65), same problems with an explicitly declared compatible accessory. It's only that I am experiencing the problem with a 5730 XpressMusic which, however, has pretty the same specs as the E75.
There is a (really) weird solution posted in this thread. I hope it works for you just as it did for me as well as many other users.

Similar Messages

Maps 3.0 with E75 (new SW 125) A-GPS Problem

Hello,
I have yesterday updatet my E75 with nokia maps 3.0. It works fine but allways it takes a long time to fix GPS.
So I think A-GPS doesn´t work.
With maps 2.0 it takes 2-3 sec. to fix the GPS.
My E75 has the new firmware 110.48.125
Has anybody a idea?
Thanks
Scoty81

Well, not only that the Ovi Maps is slow. Here is a complete symptom list which I could think this far with latest updates.
First mistake was to click update maps downloader link.
1. Maps loader 3.0 seems to be incompatible with Maps 2.0 app on the phone.
2. Downloading Ovi Maps to phone should help, but now you either will get error that not enough memory on memory card (even that there is actually 7 gigabytes in my case)
3. or if you use bluetooth you will probably see error about connection been lost.
4. Downloading a new firmware does not help. Now however with latest firmware on phone you have gained a new "feature" with USB cable that it will crash your computer (in Vista or in XP. No difference). If you take USB connection as mass memory, your pc will start to recognize the phone over and over again. In one point it may stop. Somewhere between 20th and 120th accept click. But usually slower computers have crashed totally before this happens.
So, at the moment I have latest Maps downloader, latest Firmware, Latest Ovi Maps on my phone and yet still I cannot actually download any maps because of the list of symptons above. So using your mobile as gps abroad is now extremely expensive because all map data must be downloaded through GPRS.
Good thing about Maps 3.0 is that it is actually faster to load than the old Maps 2.0 app, but the connection time with satellites and positioning seems to be still extremely long. Usually I manage to find my way to a needed place before I actually get a positioning working.

Office 2013 - Word cannot establish a connection with this document after the system resumed from suspend mode

Hiya!
This issue has been answered numerous times for Office 2010 and Office 2007, but I have yet to any solutions or Hotfixes that work for Office 2013 (x64) on Win7.
How to replicate the issue:
Open a file from a network share.
Edit file.
Leave computer on with file open. Computer goes to sleep or into stand-by mode.
Wait a bit
Wake up computer
CPU opens file in Read-Only mode and gives you the following error "Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes."
What I've tried:
http://support.microsoft.com/kb/2434898 - Office 2007 registry fixes. Does not apply.
http://support.microsoft.com/kb/2413659 - Office 2010 problem. This exact issue. Says 'No microsoft products that match this hotfix are installed'
Work Around:
I can saving new versions of these files overrides this issue, but this is sometimes not possible for end-users who only have specific access to ONE SPECIFIC FILE in a particular network share.
Please let me know how I can alleviate this issue!
Thanks
-Chris

Hi,
Are those problematic documents created via previous versions of Office?
Please also try to run a repair of your Office 2013 installtion and check if it helps. See:
http://office.microsoft.com/en-in/excel-help/repair-office-programs-HA010357402.aspx
Regards,
Steve Fan
TechNet Community Support

JDBC receiver error Cannot establish connection with the registered driver

Hi Expert,
I am constructing a proxy to JDBC scenario. And I am getting error saying "
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection with the registered driver. oracle.jdbc.driver.OracleDriver returns: The Network Adapter could not establish the connection. : SQLException: The Network Adapter could not establish the connection"
I can get into my Oracle database using TOAD with same IP address, user name and password. Could anybody tell me what should I do? Thanks a lot!
Charles

Hi,
Check with your network team, network conenction between PI and Data base not working , Network team have to open Data base system ports inorder connect PI System.
check with Basis team about network connectivty,like they are bale to ping Data base server ip or not.
please go through below thread,
SQLException: Io exception: The Network Adapter could not establish the con
regards,
ganesh.

Network Adapter cannot establish connection

Hello. I can't seem to find an answer to this anywhere: I have a database that can be accessed via JDBC from certain IP addresses but not others. The ones that can't access it give me the exeception: "Network Adapter cannot establish connection" The database machine can be PINGed from the client; the IP address of the database is used so it's not a name resolution problem; we are instatiating the driver correctly...AND it WORKS from other clients!
Does anyone have any ideas as to what the problem could be?
Thanks.

If there are firewalls involved, connections on port 1521 have to be allowed.

Sybase Connection Error - cannot establish database connection

BO Data Services Tool -> Creation of new Data Store -> Sybase ASE
When I tried to create a sybase datastore(New connection), I've got this error message. But I am able to connect to sybase database with client application with same connection parameter. I appreciate if someone come across same issue.
ERROR MESSAGE
*WARNING: Cannot establish database connecton.
u2018Sybase connecton error: <Sybase ASE Server message number <1640> State <2> Severity <16> From Server <tstlS03>: Message Text is:
Adaptve Server requires encrypton of the login password on the network.
Sybase ASE Server message number <4002> State <1> Severity <14> From Server <tstlSO3>: Message Text is: Login failed.
Sybase CS Library message number <6717S468> Severity <4>: Message Text is: ct_connectO: protocol specific layer: external error: The attempt to connect to the server failed.>.u2019 lODI- 1111341)

I tried to create repositories for sybase, it failed. But it succeeded when created datastore. The procedures's as follow:
1. Create ODBC for this sybase connection, and it should display "Connection successful" when you click "Test connection".
(you need to specify several parameters like user id & password, server,database name and file, etc.)
2. Create datastore by using ODBC connection.

Cannot establish connection (updated)

I am trying to connect to an oracle 9.2.0.4 Database on Windows Server in shared mode through SQL Developer on Mac OS X and get only:
Failure E/A-Exception: the network adapter could not establish the connection.
This is my working jdbc connection string (from a linux server with tomcat):
jdbc:oracle:thin:@(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)
(HOST=xxx.yyy.de)
(PORT=1525)
(CONNECT_DATA=
(SERVICE_NAME=DATABASENAME.yyy.de)
(SERVER=shared)
I tried this one in the advanced tab with no success (the basic settings also did not work). I have a blank OS X Installation.
What is going wrong?
kind regards,
Sven
------------- update ------------------
trying to start sqldeveloper manually gives the following error:
Error: Java home /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home//bin/java is not a J2SE SDK.
Running Oracle SQL Developer 1.0 under a JRE is not supported.
If the Java VM specified by the SetJavaHome is actually a full J2SDK installation
then add 'SetSkipJ2SDKCheck true' to /Users/einstein/Desktop/SQLDeveloper.app/Contents/Resources/Java/sqldeveloper/jdev/bin/sqldeveloper.conf
I added this and SQL Developer starts (and looks the same like starting via the App Icon)
I used a small Java program to test the jdbc connectivity:
java -classpath .:../SQLDeveloper.app/Contents/Resources/Java/sqldeveloper/jdbc/lib/ojdbc14.jar TestConnection jdbc:oracle:thin:@xxx.yyy.de:1525:SID
this works !
But SQLDeveloper still cannot establish a connection ?

I got it: the database server was not excluded in the proxy settings of the system network preferences!
Now it works ...

Cannot establish TLS with SMTP...wrong address, connection error 5

An error occurred sending mail: The mail server sent an incorrect greeting: Cannot establish TLS with SMTP server 65.55.176.126:587, SSL_connect error 5:connection closed.

Is this for an Outlook/Hotmail type account? What do you have for the server settings under Tools/Account Settings/Outgoing Server (SMTP)? (For outlook/hotmail it should be STARTTLS security on port 587, normal password authentication, email address for the User name.)
If you have an anti-virus/security program scanning outgoing mail, disable that option and see if it helps.

Cannot establish connection - JDBC driver for MS SQL server 2000

Hi,
We are facing problems in connecting to SQL server 2000.
We have installed the latest version of the driver from followin link and following
https://websmp108.sap-ag.de/msplatforms > SQL Server > JDBC Driver for MS SQL Server (Version 3.70.10)
We have given the following entries in our communication channel:
JDBC Driver : com.microsoft.sqlserver.jdbc.SQLServerDriver
Connection: jdbc:sqlserver://<SQLserver IP>:1433;databaseName=production_info
Please let us know the procedure to find if the JDBC driver for SQL 2000 is installed from our SAP XI.
ERROR DETAILS:
Error during database connection to the database URL 'jdbc:sqlserver://<SQLserverIP>:1433;databaseName=production_info' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://<SQLserverIP>:1433;databaseName=production_info': SAPClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver'
Please help.
Regards,
Rehan

Hi Chris,
We have used the same because we have downloaded the driver from following location
https://websmp108.sap-ag.de/msplatforms ; > SQL Server > JDBC Driver for MS SQL Server (Version 3.70.10)
I have tried with both "com.microsoft.jdbc.sqlserver.SQLServerDriver"; and "com.microsoft.sqlserver.jdbc.SQLServerDriver";, but still I am facing the same error.
Service market place has given the driver as "JDBC Driver for MS SQL Server (Version 3.70.10)", is there a way to find out if it is for 2000 or 2005?
Thanks for your reply.
Regards,
Rehan

Error 12703 VMM cannot establish a trust relationship SSL/TLS V2V

Issue with V2V in VMM. I though I'd share this one. On a customer site doing a number of V2Vs and P2Vs via VMM. On the V2V it would create the object then fail with the message below where %ServerName is one of the Hyper-V hosts:
12703 VMM cannot establish a trust relationship for
the SSL/TLS secure channel for %ServerName;
server.
Install the certificate to the trusted
people root store of the VMM server
and then try the operation again.
After much digging and testing I found it was an issue with VMM talking to the ESX host. Nothing to do with certs or the hyper-v hosts. I've worked round this issue by migrating the VM onto another ESX host. The ESX environment is going to be decommissioned
anyway.
Hope this helps someone out there.

Please let us know if you are using
SharePoint communicates to an external service via HTTPS
Please try perform following steps:
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
In SharePoint Central Administration site, go to “Security” and then “Manage Trust”. Upload the certificates to SharePoint. The key is to get both the root and subordinate certificates on to SharePoint.
The steps to get the certificates from the remote server hosting the WCF service are as follows:
1. Browse from IE to the WCF service (e.g., https://remotehost/service.svc?wsdl)
2. Right click on the browser body and choose “Properties” and then “Certificates” and then “Certificate Path”.
This tells you the certificate chain that’s required by the other server in order to communicate with it properly. You can double-click on each level in the certificate chain to go to that particular certificate, then click on “Details” tab, “Copy to
File” to save the certificate with the default settings.
As an example, get both VeriSign & VeriSign Class 3 Extended Validation SSL CA.
reference : http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

Windows host cannot establish Ethernet link to Arch Router

This is a weird problem.
I have a Windows host about 20 meters away from my Arch Router, the Ethernet cable goes into the wall, with wall sockets, so it's a total of 3 cables (1 in wall, 1 @ router, 1 @ host). I've tested the Ethernet cables with a LAN tester, they are all fine. When I connect the host to a Linksys router using the same cables, an IP address is obtained and the link is up and running.
But when I connect the host to my Arch Router (an Arch computer with some network cards), no ethernet link at all is detected. No lights on the ethernet card of the host, and ethtool on the router reports the link being down. I have connected my laptop to this ethernet card of the router and it works just fine, I get an IP and I can surf the web etc.
I really have no clue why this other host cannot establish a link. Does anyone have a clue what the problem might be?

pyther is right. Check for Auto-MDIX support on your network cards.
What network cards are you using?
Rule of thumb:
Auto-MDIX is a requirement in the Gigabit Ethernet specification, so proper Gigabit capable cards will work 99% of the time whatever cable you use.
Fast Ethernet (100mbit) and below does not have Auto-MDIX in it's specification, so those 9 out of 10 of those cards will not perform it! When connecting these directly to another network card, use a cross-cable.
Also make sure the network cards are in working order. I assume the ArchRouter PC's network runs fine when you connect that to your Linksys router?

Cannot establish secure connection to account--trying again

When I try to get to the itunes store from itunes, I get a message saying that Apple cannot establish a secure connection. It suggests checking to see that my browser has SSL3.0 or TLS 1.0 enabled. I have both of those protocols enabled, and always have had them enabled. I can order from other websites with no problem at all, so they obviously can establish a secure connection with my computer. I have enabled phobos.apple.com on my Windows firewall and deleted McAfee firewall (my subscription was up, anyway). I have reset the files I was told to reset. NOTHING has changed--I still get the same message every time. I can load CD's onto itunes and load the music from my PC to my ipod. Does anyone have any ideas?
Is it possible to contact an actual person through itunes store support? So far, all I have found is useless files and this discussion forum. Does apple provide software support for the itunes store? Any help is welcome.
Specs:
OS = XP Home edition
emachines, 3.3 Ghz chip, 368 MG ram
Thank you in advance...
emachines T3508 Windows XP

After a long hassle involving uninstalling and reinstalling both iTunes and QuickTime, I stumbled across the solution--the problem was with my browsers. Not that there was anything wrong with my browsers themselves--I was using Firefox and Mozilla--but it turns out that the iTunes store does not work on these. It works only on internet explorer, as far as I can determine. So, instead of being able to use the browser of my choice, I am stuck with that perennial hacker magnet, IE.
IMHO, Apple made three major errors. First, they have not optimized their site for browsers that work just fine for other on-line merchants (Amazon, Sierra Trading Post, etc.).
Second, their message is misleading. Other websites with the same constraint give users a message saying that "We are sorry, but this site is optimized only for Internet Explorer."
Third, their e-mail response message to people with this problem says to uninstall and reinstall the software. It does not mention switching browsers. Apple, I expected better from a company with your reputation for innovation.
Windows XP
Windows XP

Cannot establish a secure connection

I bought a MBP few days ago and then upgraded to Mountain Lion.
When I connect my iphone to my macbook pro,error occurs with this message
"iTunes cannot connect to this iphone.Cannot establish a secure connection to the device."
but iPhoto works well to import my camera photos.
How should i do to establish the conncection because i want to back up my iphone using this notebook.
Thanks!

Hmm, no changes. Still the same issue. I deleted the files described, rebooted and reconfigured the network.
hmm, Finder still remembers his old server connection settings, maybe i should delete those, too. Any idea where finder stores his server connections?
In my perception the message that no secure connection can be established comes up immediately after sending the connect command. I don't think that there is network traffic, there is no noticeable latency...

Why Cannot establish connection.

Hi,
I'm a new for weblogic and jdeveloper, and now I try to deploy FOD (http://www.oracle.com/technology/products/jdev/samples/fod/index.html) on a Linux server(Jdeveloper is running on the same server),but the connection to localhost can't be established. When I check the connection to 127.0.0.1 on port 7101, it always complains like that:
Testing JSR-160 Runtime ... failed.
Cannot establish connection.
Testing JSR-160 DomainRuntime ... skipped.
Testing JSR-88 ... skipped.
Testing JSR-88-LOCAL ... skipped.
Testing JNDI ... skipped.
Testing JSR-160 Edit ... skipped.
Testing HTTP ... success.
Testing Server MBeans Model ... skipped.
but the website: http://127.0.0.1:7101/console can be accessed, anyone knows why?
Thank you.

You are not able to establish a connection from jdev to the server right. If so you need to add an entry with the ip address and the hostname of server in the host file C:\WINNT\system32\drivers\etc\hosts.

Firefox cannot establish connection to server 127.0.0.1:1234

I want to open my bank's security and it says that firefox cannot establish connection to server 127.0.0.1:1234

I now know that a file " user.js " has been installed (probably by the Trojan) along with " user.js.BAK " in my Profiles Folder. The Support article on " user.js " says that it is never installed by default. Unless FF4 installs one (unlikely) the presence of this file explains exactly what is happening. It contains changes to the normal configuration and is read at every FF startup when it automatically transfers its content to another file in Profiles. This is " prefs.js " where all the preferences are stored. It also has a BAK file added by the Trojan: " prefs.js.BAK ".
The above Article says these files can be read by Notepad. But mine cannot. The BAK files display pure gibberish in Notepad. The parent files cannot be opened at all. They generate a Compile error. They seem heavily protected from interference.
Would somebody kindly tell me (1) What application normally opens BAK files; (2) Assuming I can do so, would it be OK to simply delete the user.js file and its backup?
Even if I have to rename them first?
With that gone, I can probably reset "prefs.js" either using "about:config" (which Preference?) or using the UI on the Tools | Advanced tab to select "No Proxy". But I am unsure about these next steps and would welcome corroboration.

E75 110.48.125 + BH 703 = cannot establish bluetoo...

Similar Messages

Maybe you are looking for