E75 Email (Access Point problem)

Hi,
I've setup nokia email without any problem using my WiFi and it was synchronizing without a problem. Since then I've I'm unable to change the Access Point to my Mobile provider. I keep getting "Server not found", even though the server name is still properly configured (netac3.vie.hosting.com). Can anyone help?
Regards,
Nuno

Sorry when I wrote this was in Houston at the Continental Presidents club being yelled at... sorry
The problem still exists, with no solution found so far, can anyone help?

Similar Messages

Nokia Email Access Point Configuration Disappeared

I`ve just upgraded to the new Nokia Email client on my N95-1 (model RM-159). It says it's version 9.04 (21).
Since upgrading, I haven't been able to configure the Access Point to be used by the email app, which used to be under General|Service Info. This is quite important to me, since I only want to let the app work when using WiFi.
Does anyone know what happened, or how can I fix it ?

This works for the E71: for the time being a workaround for the access point problem:
I set my SmartConnect connection (you can only download this from the Download icon on your phone) group as the default APN, I have the client using Wifi if available and the cellular network if not. This MUST be configured at initial setup, ie when you install Nokia Messaging, change it from "default" to the SmartConnect access point group.

Nokia email - access point

I have an N96 with S60 r3 fp2. It supports "destinations" (ie access point groups) as well as the concept of a "default" access point (group).
Only "new" apps use these capabilities. The internal imap client seems to be ok with default, but "nokia messaging" is not and will only allow a specific AP to be selected.
Since I have trouble with 3G/GSM at work I roam onto WIFI for other apps. NOkia messaging needs to do the same.
Ideas?

This works for the E71: for the time being a workaround for the access point problem:
I set my SmartConnect connection (you can only download this from the Download icon on your phone) group as the default APN, I have the client using Wifi if available and the cellular network if not. This MUST be configured at initial setup, ie when you install Nokia Messaging, change it from "default" to the SmartConnect access point group.

N80 email access point wandering

Hiya
I've set up email and wlan fine - and the standard Orange settings for GPRS are working with no problems.
My issue is when I start wandering around!
I set up the phone to check for email though my wifi connection on a regular basis. The idea is that I'm sitting around in the evening without a PC on and my phone will alert me of new email. This also works fine.
However when I leave my hotspot, I want the phone to think "err ok I can't get that connection, I won't keep checking email". I thought that "only in home net." would probably do this in "Automatic retrieval". This appears to work ok as the "Access point in use" for "Incoming email" is et to my wlan..
But, when I go out and about and manually try and check my email, the phone says "Can't find [wlan]" and gives up with no option to check the GPRS connection.
Err - any ideas? I don't think I'm trying to do anything out of the ordinary. I just wwant regular email checks when I'm within range of my lan, and this to stop (unless I manually override) when my only option is internet access that I have to pay for.
I don't see tinkering with the settings on 3 email accounts whenever I come in / go out to be an option.
Any ideas?
Thanks in advance,
Neil
www.babylondirect.com

Menu > Tools > Settings Wizard.
If this doesn't work, back up everything and type *#7370# to soft reset or take it to your nearest Nokia Service Centre and get software version 4.
Nokia N80 - v4.0623.0.41

LAPAC1750 Access Point Problem

I have a device (Sony Xperia Z1 Compact) which cannot connect to the Access Point. The device can connect to other Access points (tried Motorola, Fritzbox, Cisco) without any problems.
It does not matter what setting I configure on the LAPAC1750. It does not work for the Sony Xperia Z1 Compact.
Any idea?
Solved!
Go to Solution.

Did Linksys ever get a resolution back to you? I noticed they have not posted any new firmware since June (stil 1.05.00), and from other threads on other products it seems this is typically resolved with a firmware update. I bought three LAPAC1750s to install in our large home on each of our three floors, and every device (PC and Mac laptops, iPad, Kindle Fire HD, iPod, iPhones) can connect to them EXCEPT my HTC One M8 running Android 4.4.4. Shows same behavior you are seeing, will try to connect and then just disable it. Same behavior on both 2.4GHz and 5GHz.

Search function + Access Point problem

I access the Google Search from the Search software pre-installed with the N97 and set the Network destination as "Internet". I got 3-4 access points under "Internet" (4 if there is a saved wifi point).
I have no problem at all conducting the search as it would use the 1st access point under Internet, but when I try to view one of the search results, which is opened in the native broswer of the phone, it would use another access point (the 3rd priority access point) to connect.
Does anyone have any clues on how to resolve this?

Hi, not sure if this will solve your problem but try:
Select 'Web'
Once there Click 'Options'
Select 'Settings'
Select 'General'
Select 'Access Point'
Choose 'Ask when needed'
Hope this helps

Setting email access point

I'm trying to set my internet access point for emails to automatic. But it only gives me an option to pick one. I want it to connect to my few preffered access points only so how do I fix this.
Appreciate your help

I found the solution...I think.
If you set it on default connection then it should just connect to the network your on, or the next priority.

Access point problem... help

i have an access point which is not suppose to be in the native vlan, the port which is connected to the access point has no trunk.
when i checked the native vlan, this error prompted...
%SYS-4-P2_WARN: 1/Tag 1 on packet from <mac add> port 1/3, but port's native vlan is 2
but when i unchecked it, the connection lost between AP & switch...
what actually happened? can anyone plz help me?

Hi,
the connected switch a Cisco Switch? If yes do you have configured a "switchport access vlan xx"?
If the connected Switch is not a Cisco i had a problem similiar to yours and fixed it with the setup of the used VLAN (in my case VLAN 10) as Native VLAN in the AP.
Maybe you should setup the Native VLAN to 2 in your AP Config.
I Hope that helps.
Best regards,
Frank

3600 Series Access Point Problem

Have a AIR-CT5508-K9 Controller running 7.0.116.0 software.
Just purchased 3 AIR-CAP3602I-A-K9 access points.
When these try to join the controller we receive the following error message.
%CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 7.0.116.0 on WLC Plt-72-Controller-1
Do the 3600's require a certain revision of code?
Also I read were the 3600's require a GE connection. Will they work on a FE connection?
Please advise.....................

Yes, you need to be funning 7.2 code for the 3600 to join and work.
Make sure you check the release notes for hte supported AP, incase you are running any that are not supported in 7.2
Steve

Access point problem

I installed a MIDlet in my nokia 6600. When application tries to open an Http connection I have to select the access point. In my mobile I have set my default access point. Still it asks me to select access point everytime. How can I make the access point selection automatic? Can somebody please help me?
Regards to everyone.

2.2mb of free space seems to be more than enough for you to create a new access point, hmm.. strange.
Would you want to try freeing some memory space by moving gallery items from the phone memory to the memory card? If it still don't work, restoring of factory settings might work but all data will be lost if you choose to restore all. The last resort would be to have a software reflashing which can be done either via the NSU or at the service point.

S110 wifi access point problems

I am trying to connect my camera to wifi by adding it as an access point. I typed in the password correctly but it keeps telling me unable to connect. Please help! Thanks in advance!

Hello Rainingmisery,
Rather than going through the steps here through the Canon Forum, we would actually like to direct you to our web site where we have a dedicated section on getting the PowerShot S110 connected wirelessly.
We anticipated that our customers would like more in depth information on wireless connections and as such made a specialized support site complete with videos and articles dedicated to this camera.
The main PowerShot S110 wireless help web site is here.
Here you will see specific videos and at the bottom are links to articles for making wireless connections through WPS or Manual. We think you will find this quite useful in setting up the camera wirelessly.
If you need further assistance or would like to speak to someone directly, we have our world class technical support team at your disposal. Get in touch with us through our service and support site!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Automatic Email Retrieval through Access Point Gro...

Hi,
Has anyone else had problems with applications locking up while using 'Automatic Retirieval' through 'Access Point Groups' on a wireless network?
My phone works fine in every other respect but as soon as I schedule it to access my email account (not BB) I invariably get one of the following instabilities:
The email application will not collect at the set intervals or...
It'll collect emails at the set intervals for a while & then lock up either the:
• Email application,
• All internet applications,
• The 'Email key' (but the application is still accessible via the icons).
• or the Email Key loses its settings: ‘Item no longer available. Restoring default multimedia key’
I can manually collect email & use the web through the same ‘Access Point Group’ & I have two other computers running off this wireless network fine?
Nokia E61. Firmware: 1.0310.04.04Message Edited by infinitybeach on 13-Jun-2006
11:28 AM

This sounds like a reasonable request, is the v11 firmware just broken in this regard?

Problems with static IP from TP-Link Access Point

Hello Guys!
I'm new with Apple - i got a Macbook Pro Mid 2012 since 2 weeks.
Everythings running fine and im really happy with the Macbook - except of the Wifi.
I have the problem that the internet connection is just working temporarily, sometimes its just working for 1 minute, then its just stopping. im still connected to the wifi, no connection abortion. websites are just not getting loaded or just half.
i cant find a solution for it, so please help me
I connected a TP-Link tl-wa801nd with a ethernet cable to our companys network - creating a wifi network access point with which i can connect to with my devices (Macbook Pro, iphone and Win7 PC)
I have to give my devices a static ip, when i want to connect with it:
IP: 192.168.0.151 - 192.168.0.199
Subnet mask: 255.255.255.0
Router and DNS: 192.168.0.1
These preferences are working perfect with the iphone, Win 7-PCs and some friends Android or BB phones. No problems.
Except of the Macbook pro:
I got the newest Mavericks on it and the same network preferences (except of a ascending ip address and the search domain 192.168.0.1)
But like i said above - network is just working temporarily, sometimes for 1 minute, then stopping for 10 minutes... The problem must be the macbook, because every other devices is working fine.
Thank for your helping answers
banana-benjiro

Hello banana-benjiro,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
http://support.apple.com/kb/ts3408
Best of luck,
Mario

IOS 6.0.1 - Problems with certificate based authentication on wireless access point

Hi all
We are using iPad 2 as order terminals in our shops for about 5 months. Some of the iPads (the first who entered the field) started to cause problems now. These iPads are no longer able to keep long-term connection to the wireless access point in our stores. After selecting the SSID a successful authentication using the stored EAP-TLS certificate is performed (this can be seen in the log files of our wireless controller and by the IP adress that is given by DHCP). But within seconds the affected iPads opening up a captive portal page (empty, without contents) and separates the connection to the SSID after a short time again.
Affected are currently only iPads 2 with iOS 6.0.1, which were staged about 5 months ago. The newer devices with iOS 6.1+ connect without problems and open no captive portal page. The first cases occurred on the last Wednesday. Before that everything worked without difficulty. No modifications took place on the security structure. The numbers of affected devices increased until all iOS 6.0.1 were affected.
Access to other SSIDs (without use of certificates, by entering a key) for the devices is still possible (the devices does not open an captive portal page). The DHCP scope is not used up, so there are enough IP addresses available.
"Newer iPads" with an iOS of 6.1+ are are showing no problems on the same wireless access point, where the older devices are rejected. New and old devices use the same certificates and authentication mechanisms.
In the analysis of the issue, it turned out that the problem can be solved by an update to iOS 6.1.3. Subsequently, the iPads will be able to rebuild a connection with the access point, without a captive portal page.
Since the bandwidth is very narrow dimensioned in our stores, the communication of the iPads was severely restricted. Thus, the iPads are for exampleare accessible for the APNS but can not find iOS updates or check for their availability.
A comprehensive update to iOS 6.1.3 is currently excluded.
Does anyone knows this issue? What else can be done (except from updating)?

I will answer my own question in case it helps anyone else.
It would "seem" the ios 6 devices try the proxy and if that is not working they resort to the def gateway.
To Fix I did the following:
Brocade WIFI network has IPS and Advanced Firewall rules that seemed to be tthwarting some traffic, the iphones would then try the default gateway and be blocked at the FW.
I disabled the IPS and the Advanced Firewall Settings on the wifi as they are redundant to our main IPS and firewall that all traffic flows through anyway. I will tune it later, but when the CEO is demanding a fix "**** the security, full speed ahead"
Created some rues on the firewall to allow...
- IMAP-SSL (port993) outbound
- SMTPS (port 465) to yahoo servers outbound
- tcp port 587 to yahoo servers outbound
- https to akamai servers
Most http and https goes through the proxy as it should, BUT...
It seems that the akamai traffic allways ignores the wifi proxy settings and just heads straight for the default gateway. I suspect there is a bug in the icloud app?
Hope this helps someone else.
-Bo

Problems with AirPort and WPA access point

Okay, I have done quite a bit of research and I still cannot resolve my problem because of this, I am turning to this user community.
Here is what I know as of right now:
I am running Windows OS X 10.4.4 with AirPort Update 2005-001. My Access Point is a 3COM 8250.
The AP is setup not to broadcast its SSID, to use WPA-TKIP (or in Apple terminology, WPA Personal) and the password is set to use alphanumeric.
When I try to connect my PowerBook with the SSID name, WPA Personal and the correct password, I get the following error:
The password you entered is not correct for the Airport network *******.
To troubleshoot here are the test I have run and their outcomes:
Test
- Result
Set the AP to completely open
- Connected
Set the AP to open, didn't broadcast the SSID
- Connected
Set the AP to WEP, broadcast the SSID
- Connected
Set the AP to WEP, didn't broadcast the SSID
- Connected
Set the AP to WPA & WEP, broadcast the SSID
- WEP : Connected
- WPA : Not Connected
Set the AP to WPA & WEP, didn't broadcast SSID
- WEP:Connected
- WPA:Not Connected
Set the AP to WPA only
- Not Connected.
Now, I should mention that when I was running 10.3.3 I could not connect either. The AP is running the newest firmware and I have three Windows XP SP2 laptops / workstations that can connect with no problems.
I have tried to find a compatibility matrix on both 3COM's and Apple's websites to see if it might be a compatibility issue but I have not been able to find one on either site.
Any help that anyone could provide would be greatly appreciate.
Thanks in advance.
17" PowerBook G4 Mac OS X (10.4.4)

Hello MisssAsh. Welcome to the Apple Discussions!
It's always a good idea to do a complete power recycle when changing network configurations.
Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AirPort Express Base Station (AX), & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

E75 Email (Access Point problem)

Similar Messages

Maybe you are looking for