E75 email setup problems with 210.12.15

Corporate email and gmail have worked fine for a year, but after 210.12.15 upgrade started first to have synch problems. After shutting of the E75 it now loses email setup information and just keeps asking passwords. I have tried resetting to factory defaults and restoring phone data, but still not able to sync email. Trying to setup email from scratch also gives error message in the beginning and is not able to connect to the server. 210.12.15 included changes to the email software, so it is the obvious candidate, but I haven't seen any other people with the same problem?
80's user

Hi,
after repairof keyboard, E75/ FW 210.12.15 was installed. I've not only problems connecting to my home WIFI network for checking mail (MAC filtered and with WEP key), I also can't connect to Internet thru this WIFI network. Checked with another open WIFI network and did not succeed either.
I've indeed noticed changing some settings were not stored.
Aonther thread mentions FAT of memory card corrupted, letting E75 reboot spontanuously. Formatted my microSD card. Still rebooting unexpectedly.
I find it strange this version is not on official Nokia support site.
Hope we can find solution.
Stefan

Similar Messages

Email setup problem with bigpond

I have purchased complete office from a computer store. I cannot set up the email to my bigpond email address, the outgoing server gives a warning
mail.bigpond.com does not use encryption. its also does not recognise my password. Any suggestions please?

Indeed there is no mention of encryption here: https://go.telstra.com.au/helpandsupport/-/standard-configuration-and-settings#accordion2
I think we need to see your account settings.
# Go to '''Help|Troubleshooting Information''' in Thunderbird
# Clear the checkbox labelled "Include account names"
# Click the button "Copy text to clipboard"
# In your reply here, paste (ctrl+v, or right-click|paste)
Check it over for anything you'd like not to share. You can remove all the printer and font stuff, since it isn't likely to be relevant.
I'm not sure of the significance of "I have purchased complete office from a computer store". Is that a software suite, or the hardware?

Pearl 8120 - email setup problem-pls advise

Hi everybody,
I bought my bb via ebay - unlocked,new. I cant setup my email, as it only has 2 options:
1/ setup using bb enterprise server
2/ skip email setup
missing the option setup /add new email address for bb internet email
i am a private person with no enterprise password, is there something i can do to make this work?
my seller has no clue what i´m talking about, replaced the phone and it has the same problem
thanks a lot
Erika

Maryteetee wrote:
Pls,I just bought a new BB,I want to set up email but it is not co-operating. What can I do?
Hello,
Please add some details..."not co-operating" is inadequate to even make any guesses. What exactly do you try? What exactly happens with what you try? Are there error messages? If so, what are they (exact, complete, including punctuation please)?
Details always help us to help you better.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

E72 email setup problems. Please help

I am trying for some time now to set up my email account on my new Nokia E72 without any succes. I hit the email setup button, chose the right acces point provided by the mobile company and after I enter the email and password the mesage "maximum number connections in use. Close an active connection first" appears. Here I only have two options OK or CANCEL. Hitting CANCEL it just gets out of what I was doing. Hitting OK it only gives me the acces point which I am using without any other option so I have to close it. Could anyone help me with this problem please?

Then you better check if other apps like Facebook, Worldmate, etc.. use connections.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Email setup problems - user name error

Hello,
This afternoon, I was handed a blackberry for the first time by my work. It had previously been someone elses but was wiped. I am having problems trying to get it to set up my emails. Here's what is happening:
Click on Setup Wizard
Click on Email Setup
Select 'I want to create or add an email address'. Click Next.
Get a message saying 'After you click Next, the Blackberry Internet Service setup application opens.' Click Next
The screen says 'Existing users - If you want to access your email settings or you changed your device, log in.'
It then asks me to enter my user name and password. I put in the user name and password that I registered on the Blackberry ID website earlier today, and it gives me an error saying: 'Blank User Name. Type a valid user name.'
I have tried several times now, tried turning the phone on and off, but nothing seems to work.
Can anyone help?

Hi and Welcome to the Community!
It may be that you have an older device, older OS, and older email configuration app. As such, BIS is likely not linked to the BB ID (that's a newer capability). Rather, you need the actual BIS credentials that are associated with that BB...the BIS service is linked to the BB PIN, and that linkage is at the service provider side, so wiping the device itself does nothing concerning the BIS account credentials. You either need those or you need the carrier to reset the BIS account.
As a company BB, you should probably seek support from your admins...it is also possible that they are blocking the use of personal email accounts on the company owned BBs.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BlackBerry Storm 2 9550 Email setup problem

I have a Tmobile BlackBerry curve 3g originally with a BlackBerry plan (BIS) that has an email, internet, and blackberry messenger working perfectly. My question is, I would like to use my older Blackberry Storm 2 9550 (unlocked) with my present Tmobile BlackBerry plan. However, after the "device change" I could not move my emails perfectly as I would get errors setting up on Storm although I was able to have internet access, use bbm and gps under EDGE signal.
To fully understand the problem, I tried doing the same procedure onto my other unlocked Bold 9650 device and was able to move and synchronize emails, together with internet access, gps and bbm. I just do not understand why I could not move my emails onto Storm 9550 just like on the Bold 9650 which are basically the same unlocked CDMA phone.
I have done the following:
-back up and restore (everything including service books from the present curve 3g to storm2)
-have done "register now" on host routing table on storm 2
-checked service books on storm2 and able to find "Email [CMIME]
-email setup would result to "The application has encountered an error and cannot continue"
-TCP/IP APN setting set to: epc.tmobile.com
-Storm 9550 has v5.0.0.1015 (Bundle 1656, Platform 4.2.0.442
If you could please help me step by step I would really appreciate it. Thanks
Marc

Hello marc1075 and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're having an issue with your Email setup application.
Backup your device and do a security wipe (click here) and before any data is restored, click on Email settings. Does the same error occur?
Could you send me a private message with the PIN? I can investigate further for you.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Remote Delta link setup problem with Bean / Access Service

Hello,
I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
I already have the Remote Role Assignment working without any issues.
The following have been done successfully:
1. Same user repository has been setup for both the portals
2. Setup trust between producer and consumer (SSO working fine)
3. Producer added and registered succesfully on consumer
4. Permissions setup on producer and consumer
4. pcd_service user with required UME actions setup
I am able to see all the remote content in the Consumer portal.
When I try to copy the remote content and paste it as local content, I am getting the following error:
Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
After increasing the log severity, I am able to see the following in Default Trace:
com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
AbstractAdvancedOperation.handleDirOperationException
[EXCEPTION]
com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
Could not retrieve the bean / access service to connect with producer
Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
I am stuck at this point and am not able to find any information on this.
I would really appreciate if some one can point me in the right direction.
Thank you for reading.
- Raj

Hi Raj,
Please check your config of the P4 port on the producer. Is it really 50004 (check SystemInfo of the producer)?
I do think there's a problem with the P4 communication since RDL requires P4 connection.
Do you have load balanced consumer-producer connection? Please refer to this blog for further details
Little known ways to create a load balanced Consumer Producer connection in a FPN scenario
Regards,
Dao

E75 - Contacts. Problem with cache

Hey there
I've got my brand new E75 and I'm quit happy with it but there is a very strange problem. When I open the contactsmenu and try to search after some names it shows me the errormessage that the cache will be bbuild up soon. I should try it later. But I've been waiting since yesterday and it shows me all the time the same message. Is that a bug oder a system error or is that the problem with guy in front of the device???
Sorry for my bad english ... I'm just a german
Regards from the sunny baltic coast
Uli

Hi Uli,
Please read through following thread ignore there comments about simcard (that's pure coinsidence)
Most probably you will have to give it more time, but as usertein as it sounds - noone just knows it for sure.
Just for sake of asking - did you upgraded firmware to the last version already? do that if you didn't.
# if you have found my comment useful please click on KUDOS! button #

My Macpro has stopped my emails No problem with Ipad or Iphone but unable to send or receive or even look at history. what to do?

Question My macbook pto has stopped my emails. No problem with Ipad or Iphone but history stops two days ago and unable to access anything. Help.

OS X Mail: Troubleshooting sending and receiving email messages

Email setup problem on 6760 slide.

What can I do if the email setup function on my new 6760 slide goes all the way through and then fails. This has happened with a normal personal POP email account with just a password and with a business IMAP account with SSL security. Is there another way to set email up? Is there a known bug?

Hello everyone,
I have discovered a workaround that solves this issue:
1. On the list of mail clients, scroll down to the bottom and select 'Other'
2. Enter a nonsense email address e.g. [email protected] and password
3. Proceed through the 'Validating e-mail account' message, than select the 'POP/IMAP' option
4. Now, change the fields to reflect your valid email account settings.
Hotmail/Live users can follow these guidelines:
Email address: your email address
Username: your email address
Password: your email address password
Mailbox Type: POP3
Incoming mail server: pop3.live.com
Incoming mail security: SSL/TLS
Incoming port number: 995
Outgoing mail server: smtp.live.com
Outgoing mail security: StartTLS
Outgoing port number: 465
You can find alternate settings for different accounts fairly easily by searching on the web.
5. You will then proceed to the mailbox screen (and hopefully your emails). From this point onwards you can enter the settings menu and change the above settings again if you need to.
You can also change the preferred connection type in here.
I found that i needed to change the default connection (that the mail application had chosen) to my WAP connection.
After this, my emails were fully funtional.
Hopefully, this will help a few of you,
Regards,
Luke.

Thawte Personal Email Cert - Problem with Mac Mail

Hi, I have requested a free cert from Thawte and there seems to be a problem with Mac Mail (using 2.0.7).
I am using Entourage to send a signed message from [email protected] to [email protected]
If I check mail for [email protected]
Mac Mail reports "There was a problem reading the digital signature for this message"
If I check the same account with Thunderbird, everything works fine.
Anyone else having or had problems?
-chris

Hi,
Thanks for the responses. I requested another cert and that did not help. Here is the process I used after requesting another cert.
1. Logged into www.thawte.com and requested a new cert.
2. Using Firefox, retrieved the cert.
3. In Firefox, backed up the cert to a pkcs12 file.
4. Opened Keychain and deleted the first cert.
5. Imported the pkcs12 backup file. Imported fine.
6. Open Entourage, under tools, accounts, exchange profile, security, selected the cert Thawte Freemail Member.
7. Checked all 3 options (sign, include cert, clear test signed.
8. Created a test message from Entourage to .mac account address.
9. Checked mail with Mac Mail and signature fails.
10. Check with 1.02 Thunderbird and it comes back with valid digital signature.
Next, I sent a test email to my Exchange account from Entourage and that message verifies fine. It just seems to not work when I check my email with Mac Mail.
Thanks!
-chris

Email attachment problems with "excel" files.

I have just upgraded to the iphone 4 from the 3gs and since doing so any emails I receive with excel files attached will not open the attachment? These files openened with no problem on the same email account on my 3gs.
Instead when I download the attachment and go to open it I am met with a page displaying....
"Unable to read document.
An error occured while reading the document."
Has anyone else having this problem or even better anyone know what the fix is to get these files showing up?
Any help would be appreciated,
Kris

After much frustration about excel files not opening and repeatedly not getting answers from apple, I think I might have found another way. It seems that the new apple OS does not support older versions of excel. By saving the excel file in question (Save As) to "Microsoft Excel 2007 Workbook" the Workbook opens just fine as an E-mail attachment. If you have macro's you can save as "Microsoft Excel 2007 Workbook (Macro Enabled)" and it works also.
The Workbook in question as far as I was concerned was created in Microsoft Excel 2003.
Hope this helps
Apple needs to get on the ball. This was almost a dealbreaker with me.
Android is looking better and better every day.

8520 Differerent email setup problem

My gaffer got his 8520 back from repair, but Im unable to set up his email. When you got to email setup it asks for existing username and password. Ive assumed the username is his email address, but it doesnt like it and asks for a valid username. Ive tried this on both his emails and am getting knowhere.
Any ideas?

Hi and Welcome to the Forums!
The credentials being requested are not the email account credentials. Rather, they are the BIS (Blackberry Internet Service) credentials that have been created. BIS holds the credentials for all email accounts configured on a BB...and BIS has it's own credentials so as to protect the email credentials. Someone created BIS credentials and only those credentials will allow access into the BIS account and configuration screens. If no one knows what those are, then contact the carrier as they manage the BIS account.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Email account setup problem with Messages app

Having recurring problems lately with a Rogers pop3 email account not syncing properly in the Playbook Messages app, unless I'm on a wifi connection. Continually tells me it's encountered an unexpected problem connecting to the Rogers server when only bridged through my phone. Is something screrwing up, or is the app designed for wifi only? I don't recall this problem originally.
Also having all kinds of fun setting up the account and having it complete the process properly. It tells me it can't connect with the server/it's not available at this time, blah blah blah. Tried just entering the email address and letting the tablet do its thing; have used multiple settings in the Advanced setup, as verified by using the EVAT tool (though it seems to only have PC, not Playbook options). Again, maybe this is just a wifi-only issue(?), but even on wifi setup seems iffy.
Duh

Rogers has different setting for home and mobile use and it can be painful to deal with
Basically they lock it down for one use or the other and not for both.
It was inteneded to be used only with your home PC and not a mobile device and some ISP have made changes to allow it
POP protocol isnt that robust and if possible use IMAP or better to use exchange active sync if possible (not all ISP use IMAP or EAS)
I gave up on it and switched to outlook.com
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/SMTP-server-issue-with-your-...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Simple setup problems with JSTL and Tomcat

Hi all, I'm having some problems getting JSTL to work the 1st time. JSTL setup seems to be a common problem for relative newbies, but having read previous threads, I still haven't been able to solve my problem so hopefully someone can help:
the jstl.jar and standard.jar are in my WEB-INF/lib directory, so I don't think it's a classpath problem.
My jsp page has the following at the top:
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>Later, I reference a bean var with :
<c:out value="My var is : ${var.property}"/>In my web.xml I have:
<taglib>
<taglib-uri>http://java.sun.com/jstl/core</taglib-uri>
<taglib-location>/WEB-INF/lib/jstl.jar</taglib-location>
</taglib>And I've placed the actual tld (c.tld) in the WEB-INF directory.
On startup I get the error when compiling the JSP:
No such tag out in the tag library imported with prefix c
Can anyone help here?
Thanks in advance,
Mike

I think this note from the JSTL mailing list by Shawn Bayern, one of the lead developers of Jakarta JSTL and the author of "JSTL In Action", will clarify it:
http://www.mail-archive.com/[email protected]/msg04587.html
Don't put that <taglib> in your web.xml. All the books tell you to do it, but Shawn Bayern has the right answer. The URI should be the one that's in the TLD JAR .tld files.
I use JSTL and Tomcat 4.1.24 without the <taglib>, and it works fine. - MOD

E75 email setup problems with 210.12.15

Similar Messages

Maybe you are looking for