E75 fails to upgrade firmware via USB

Hi,
My Ovi suit tells me that there is a firmware upgrade to my E75. From 202.12.01 to
211.12.01.
I have now tried at least 10 times to upgrade via USB cable but all of them fails before they even start to copy the firmware to the Phone.
I have tried through OVSuite, PCSuit and also with Nokia SW updatear stand alone but all fails with slightly different error messages.
Ovi suite 2.5.8se only tells me it fail because of a disconection withthe phone
PC Suit tells me that I can't connect the phone through an USB hub (which I haven't ).
The strange thing is that I can see that they are comminucation becasue both sw are able to identify my phone and also what FW I am using.
What could be wong.
All the SW is that latest versions and I have disabled firewals + antivirus.
Also both my laptop and phone have fully charged batteries
/MrG
Solved!
Go to Solution.

What exact version do you have *now* installed on your E75?
Do you know which product code you have?
Have a look here:
http://www.nokia.co.uk/support/product-support/device-software-update/can-i-update
Please note that the product code written on the paper label may not necessarily be the product code of your telephone. If you bought it from Nokia it probably is the same. In my case, I bought it from an online store in Germany and the internal product code was not the same as the one on the label.. which is suspicious, but anyway.

Similar Messages

Epson xp-410 cannot be located after upgrade, connected via usb

after upgrade to Yosemite, cannot print, looking deeper, message says printer cannot be located. It is connected via USB. I am very confused.

Hi,
First
Please Download and run the Printer doctor tool to find and fix your problem
http://ftp.hp.com/pub/softlib/software12/COL50849/mp-135113-1/HPPSdr.exe
If you still have the issue then,
The detailed description of troubleshooting steps has been given in below link. Click on the windows XP link and follow the steps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02266743&tmp_task=solveCategory&cc=us&dlc=en&lc...
Happy Printing
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Switch fail to upgrade firmware

Hi
I use a SG200-26 smartswitch. It's a fine switch and works OK no problems.
Recently a new firmware was released 1.4.0.88 My current firmware is 1.3.7.18 - but when I try to load the new firmware I end up with an error message saying the file is over size. What can I do to make it load the file ?? I redownloaded the firmware but got the same result.
I you got an idea of how to make it load the firmware, please share it :-)

Hi,
You need to upgrade boot version first to latest one then try to upgrade firmware. upgrade boot version to 1.4.0.02 through tftp
switch57053a#show version
Unit SW version Boot version HW version
1 1.4.0.88 1.4.0.02 V02
Regards,
Akash

SPA devices - factory reset/upgrade firmware via HTTP?

I've a number of clients using SPA502G's, SPA504G's, and some of the older/Linksys SPA-922 devices with a hosted PBX.
Getting these devices to resync via http is really handy, e.g.
http://192.168.1.12/admin/resync?http://prov.domainname.com/something
I also seem to be able to reboot them via http using:
http://192.168.1.12/admin/reboot
I've just checked the provisioning guide to see if there's any documentation suggesting that I can perform other functions via http, namely:
Firmware updates, or
Factory reset
Any clues?
Similarly, I understand that a sip notification can also force a resync/update, but I can't find any official documentation describing how the SIP message should be formatted, e.g. to specify a URL in the notification.
Can anybody provide pointers to documentation for these?
Thanks in advance!
Mark

You can upgrade like the following
http://192.168.1.12/upgrade?http://domain.com/filename.bin

Failed to Upgrade firmware on Second Qlogic HBA

Dear All,
I have 2 Dual PCI-X FC HBA (SG-XPCI2FC-QF2) in v445.
I tried to upgrade the firmware version using 114874-07 patch.
The first HBA was successfully upgraded, but the second HBA was failed (please see below message).
=============================
bash-2.05# ./flash-upgrade
Using file: ./fcode_1.17/isp2312.prom
Found Path to 4 FC100/P, ISP2200, ISP23xx Devices
Opening Device: /devices/pci@1e,600000/pci@0/pci@1/pci@0/pci@8/SUNW,qlc@2/fp@0,0:devctl
Detected FCode Version: ISP2312 Host Adapter fcode version 1.14.15 05/16/06
New FCode Version: Adapter Driver: 1.17 08/09/06
WARNING!! This program will update the FCode in this FC100/PCI, ISP2200/PCI, ISP23xx/PCI, JNI1560/PCI device.
This may take a few (5) minutes. Please be patient.
Do you wish to continue ? (y/n) y
Loading FCode: ./fcode_1.17/isp2312.prom
Successful FCode download: /devices/pci@1e,600000/pci@0/pci@1/pci@0/pci@8/SUNW,qlc@2/fp@0,0:devctl
Opening Device: /devices/pci@1e,600000/pci@0/pci@1/pci@0/pci@8/SUNW,qlc@2,1/fp@0,0:devctl
Detected FCode Version: ISP2312 Host Adapter fcode version 1.14.15 05/16/06
New FCode Version: Adapter Driver: 1.17 08/09/06
WARNING!! This program will update the FCode in this FC100/PCI, ISP2200/PCI, ISP23xx/PCI, JNI1560/PCI device.
This may take a few (5) minutes. Please be patient.
Do you wish to continue ? (y/n) y
Loading FCode: ./fcode_1.17/isp2312.prom
Successful FCode download: /devices/pci@1e,600000/pci@0/pci@1/pci@0/pci@8/SUNW,qlc@2,1/fp@0,0:devctl
Opening Device: /devices/pci@1f,700000/pci@0/pci@2/pci@0/pci@8/SUNW,qlc@1/fp@0,0:devctl
Detected FCode Version: ISP2312 Host Adapter fcode version 1.14.15 05/16/06
New FCode Version: Adapter Driver: 1.17 08/09/06
WARNING!! This program will update the FCode in this FC100/PCI, ISP2200/PCI, ISP23xx/PCI, JNI1560/PCI device.
This may take a few (5) minutes. Please be patient.
Do you wish to continue ? (y/n) y
Loading FCode: ./fcode_1.17/isp2312.prom
Error: Driver interface FCIO_DOWNLOAD_FCODE failed
Error: FCode download failed: /devices/pci@1f,700000/pci@0/pci@2/pci@0/pci@8/SUNW,qlc@1/fp@0,0:devctl
Opening Device: /devices/pci@1f,700000/pci@0/pci@2/pci@0/pci@8/SUNW,qlc@1,1/fp@0,0:devctl
Detected FCode Version: ISP2312 Host Adapter fcode version 1.14.15 05/16/06
New FCode Version: Adapter Driver: 1.17 08/09/06
WARNING!! This program will update the FCode in this FC100/PCI, ISP2200/PCI, ISP23xx/PCI, JNI1560/PCI device.
This may take a few (5) minutes. Please be patient.
Do you wish to continue ? (y/n) y
Loading FCode: ./fcode_1.17/isp2312.prom
Error: Driver interface FCIO_DOWNLOAD_FCODE failed
Error: FCode download failed: /devices/pci@1f,700000/pci@0/pci@2/pci@0/pci@8/SUNW,qlc@1,1/fp@0,0:devctl
Complete
=============================
What is the solution for this problem?
What is the possible cause?
Thanks for your attention and cooperation.
Best Regards,
Novelino F.C

Hi you will not be be able to upgrade your router to Version 2.0 since this version refers to the hardware. E4200 has 2 hardware versions. The firmware version that you have is for the E4200 V1 and you already have the latest. No need to look for any other update since you already have it.

N73 Failed To Update Firmware Via PC

i've tried using pc to update my n73 firmware but it'll stop updating when it reach 53.3mb. i've been repeating to update dozens of times but it ended with the same problem. can't even find solutions in the internet. any ideas? thank in advance

at last, my n73 was succesfully updated after keep on trying for 8 hrs. thanks

How to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB

how to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB?
The 7921g is connected via USB to a PC. I am using a browser to access the phone. Documentation says "Click the Phone Upgrade hyperlink under SYSTEM options. " but that option is not present or not visible.

You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

E75 does get charged via USB if attached to PC

Hi,
I upgraded the E75s firmware to 110.48.125, now when I connect the phone via USB cable to my PC it does not get charged, earlier it used to get charged via the USB cable. Are there any settings that needs to be changed or has Nokia removed this feature in the current firmware?
Thanks in advance.
Anish

Yep - same error messages - looks like it can't find drivers but when I try and get it to search for them on installation disk it says it can't find anything more appropriate than current settings (which btw says does not need any drivers !).
Great so a few of us have the same issue. Does anyone have an answer ? Is there anyway of getting these questions to Apple or did they cut their support costs by replacing tech support with discussion groups.
Compaq Deskpro Windows XP

Trying to update firmware on my canon printer MG5320 but in doesn't recognize the printer being plugged in via USB cable

I am trying to update firmware on my canon printer MG5320 to be able to use the airprint feature but in doesn't recognize the printer being plugged in via USB cable. I have tried restarting the macbook, turning on and off the printer, repairing permissions, deleting and redownloading the update what else can I do? The prinyrt works fine otherwise...

If there are no drivers for Yosemite you might be in trouble.. HP will tend not to support printers once they are EOL.
Getting it running over wireless rather than USB might be worthwhile.
Can’t connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Has the printer been working and now failed after update.. what update caused the failure if that is the problem??

Since upgrading to mavericks anything i connect via usb disconnects

since upgrading to mavericks anything i connect via usb disconnects randomly. everything from ipods, phones and usb thumb drives is there a patch or fix out there. starting to become a pain. PLEASE HELP

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

Iphone 4 won't play via USB in car after ios7 upgrade

Music will not play via USB or Bluetooth. I own 2013 Toyota Corolla. When I plug via USB my car audio display lets me select folders and music through browse but when I select a song I get an error on the car audio display that says "read manual or contact dealership for information on how to connect". This did not happen prior to ios 7 update on my iPhone 4. Anyone else experiencing this and is there a solution or setting that I am missing?

Hi I have a 2012 Volvo V50 with premium audio. USB audio via 4S worked fine until the IOS 7 upgrade. Now i keep getting the "this accessory is not supported message"
I have read through this forum and the only thing apple suggests is "update your car oudio system"
This is total BS! Ever heard of backward compatibility? Get this fixed or Android is next for me! Apples resoponse so far shows absolute arrogance.
I am not the only one and a simple search shows thousands of people having the same issues. Asked my car dealer already and they have loads of people with the same issues. Only devices with issues are Iphones and Ipods since the IOS 7 upgrade. Reset as suggested does not work.

Since upgrading to 10.8 my iMac can't see video files to copy across in Finder when connecting my AVCHD camcorder via USB

Hi, I usually connect my Panasonic AVCHD Camcorder via USB to copy the .MTS files across to my iMac for editing. Since upgrading to Mountain Lion, Finder sees the directories for photos stored on the Camcorder but not the video directories/files. I can see them via Parallels. Any ideas why?
Thanks, Julian

ML will show the AVCHD as a pkg, so you are not able view the directories like BDMV-->Stream-->MTS. You can right click AVCHD file, then choose show package contents. you will see BDMV, then you right click BDMV to choose show package, you will see stream folder, just do it again, you will find MTS files. Next time if you want to check the MTS files you just need to do above again. right click AVCHD....
Another way, rename AVCHD to AVCHD.mts then do it same with BDMV and Stream folder, it will let you see MTS files after that. Those mts files will keep showing on your mac next time.
Hope it helps

IPhone 5 not connecting hotspot via USB to Macbook after upgrade to IOS 7.

My Macbook can only get internet hotspot net through wifi or bluetooth but unable to connect via USB and this happen after upgrade to IOS 7.0.2

You do not want to try to sync photos back from a computer that you do not sync with. That will erase everything from the phone. The pictures you downloaded to the computer do not go back to the camera roll. They are part of the iTunes sync process now. Take and put them on a CD or flash drive, put them on the computer at home and then sync them back via the photo tab in iTunes.

E75 fails to upgrade firmware via USB

Similar Messages

Maybe you are looking for