E75 Mail and Destinations
Hello,
Does anyone know how to set up Mail to use Destinations? Can't see it anywhere, I have to keep selecting WIFI at home and 3G out. I don't get any signal in my house.
Cheers, Keiran.
You need to install Birdstep Smartconnect. Its a free download and works perfectly. I have it set to 2 wireless connections (home & work) as 1st and 2nd priority and 3G as 3rd priority. It works well changing between connections seamlessly for MfE. It can confuse connections to browse. I'm experimenting with a Smartconnect destination for that also.
Once you have installed SC you will find it in your applications folder. You can set up a group of connections that you have already configured using the native destinations feature. You give the group a name, I used MAIL. Then you go to mailbox settings in MfE and in advanced settings you can set your access point to your new SC group. Perfect.
Similar Messages
-
How to Schedule and then mail to Destination
pls tell me the procedure or code or steps to schedule and when report executed sucessfully then mail to destination
i am using 10g application Server
thanks
JaiFor the mail element to work properly, the Reports Server must know which outgoing SMTP mail server to send mail to. You specify this information in the Reports Server configuration file (server_name.conf located in ORACLE_HOME\reports\conf). This file has a pluginParam element where you can enter the name of a mail server. For example:
<pluginParam name=mailServer>smtp01.mycorp.com</pluginParam>
Refer the link below for details about Configuring Reports Server
[http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_conf.htm#g1041448|http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_conf.htm#g1041448] -
My Mac Pro takes long time to load mail and start applications
My 13-inch early 2011 Mac Pro runs very slowly, particularly when downloading Apple Mail and when starting applications.
Here is what I get with EtreCheck:
EtreCheck version: 2.0.11 (98)
Report generated November 6, 2014 at 7:44:23 AM CST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.4 (13E28) - Uptime: 4 days 17:41:5
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (340.75 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.cisco.nke.ipsec (2.0.0) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
Startup Items: ℹ️
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Daemons: ℹ️
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.memeo.Memeod.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
macfusionAgent UNKNOWN (missing value)
iTunesHelper UNKNOWNHidden (missing value)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify ApplicationHidden (/Applications/Spotify.app)
Google Drive Application (/Applications/Google Drive.app)
Activity Monitor Application (/Applications/Utilities/Activity Monitor.app)
VidyoDesktop ApplicationHidden (/Applications/Vidyo/Vidyo Desktop/VidyoDesktop.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 67 Check version
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.12 Support
AdobePDFViewer: Version: 10.1.12 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
RealPlayer Plugin: Version: (null) Support
Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 Support
Safari Extensions: ℹ️
Dashlane
3rd Party Preference Panes: ℹ️
Flash Player Support
FUSE for OS X (OSXFUSE) Support
Java Support
TeXDistPrefPane Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
FreeAgent GoFlex Drive [Local]
Total size: 1.00 TB
Total number of backups: 28
Oldest backup: 2012-01-29 05:38:02 +0000
Last backup: 2014-10-05 11:34:28 +0000
Size of backup disk: Excellent
Backup size 1.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% loginwindow
1% PluginProcess
1% Microsoft PowerPoint
1% opendirectoryd
Top Processes by Memory: ℹ️
223 MB Mail
69 MB WindowServer
64 MB Memeod
52 MB mds_stores
52 MB systemstats
Virtual Memory Information: ℹ️
26 MB Free RAM
933 MB Active RAM
916 MB Inactive RAM
1.08 GB Wired RAM
10.18 GB Page-ins
526 MB Page-outsCheck out ds store's excellent user tip - Why is my computer slow?
Even a full one minute can be too long, depending on your login items...
Clinton -
Snow Leopard, Mail and Recovered message
I just installed Snow Leopard and every time I open Mail, it "Recovers" some message 2 or 3 times, I never had this problems before, it began the next hour after installed SL.
Any idea please,
Thank youHi Ernie,
I run a private IMAP server I run on my home LAN - primarily for moving email between my Windows Live (Hotmail) mail folders, and Mac Mail. I use a PC to copy email from Hotmail to the IMAP server, and then the Mac to retrieve those messages (I'm also fairly new to Mac - well, the last time I used it in anger it was System 7!).
The private IMAP server is normally reliable, but occasionally a largeish file appears to fail to transfer from Mac to IMAP folder (never from PC to IMAP folder) - it then becomes 'stuck', not appearing in either the POP3 inbox, or the destination folder.
But - and this is the worrying part - Mail whirs away and 'recovers' the stuck email into a 'Recovered Messages' folder. A minute later it whirs some more and creates another copy of the SAME email in the same folder. A minute later and another copy is created.
This carries on - I've left it alone, restarted Mail, restarted the Mac, but each time it creates a new copy of the stuck email. I've seen 20 copies of the same email created. If left unchecked I could imagine it filling
I've tried moving the email out of the folder back into the POP3 inbox, into another IMAP folder, just deleting the messages and emtying the Mail trash - but each time Mail whirs away and carries on creating recovered copies of the same email.
The only way I have found to stop this from happening is to remove the account, restart Mail and then re-add the account for the IMAP server. It then downloads all the messages again and the problem is gone.
Is there just a way to remove the 'stuck' message, or tell Mail to ignore the recovered message so it doesn't create multiple copies?
Cheers, Richard -
I have 2 computers with the same OS 10.7.5. How can I transfer all my Mail & Mail boxes from one to the other?
Hello Gene,
It sounds like you would like to transfer your mail and mailboxes from one computer to another. I recommend exporting the mailboxes from one Mac and then importing them to the destination Mac. You can find steps in the following articles:
Lion Mail: Export mailboxes
http://support.apple.com/kb/PH4811
Lion Mail: Import mailboxes
http://support.apple.com/kb/PH4853
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Script spol to mail , and report which sends output to spools
Hi All,
Please give me
script spol to mail , and report which sends output to spool.
thaks,
babuHi,
Check the below code:
scripts through email:
*& Report ZRICHA_OTF_PDF
report zricha_otf_pdf
message-id zz.
CONSTANTS *
constants : c_x(1) type c value 'X', " For constant value
c_otf(3) type c value 'OTF', " For format
c_u(1) type c value 'U'. " Mail Option
VARIABLES *
data : v_rqident type tsp01-rqident, " For Spool Number
v_rqclient type tsp01-rqclient, " For Client
v_rqo1name type tsp01-rqo1name, " For Object name
v_spool type tsp01-rqident, " For Spool Number
v_spool1 type tsp01-rqident. " For Spool Number
FLAGS *
data : f_spool type c.
INTERNAL TABLES *
Internal table for sending mails
data: it_pdf like tline occurs 10 with header line,
it_xi_pdf like tline occurs 0 with header line,
it_html like solisti1 occurs 0 with header line,
it_xi_temp like bapiqcmime occurs 0 with header line,
it_xi_mime(255) type c occurs 0 with header line.
For sending mail
data: it_objpack like sopcklsti1 occurs 2 with header line.
Internal table for Single List with Column Length 255
data : it_objbin like solisti1 occurs 10 with header line.
Internal table for Single List with Column Length 255
data : it_objtxt like solisti1 occurs 10 with header line.
Internal table for Structure of the API Recipient List
data : it_reclist like somlreci1 occurs 5 with header line.
Structure of the API Recipient List
data: x_doc_chng like sodocchgi1.
Internal table for storing the variants
data : begin of it_variant1 occurs 0,
variant like varid-variant,
end of it_variant1.
Internal table to store variants for the programs
data: it_variant2 like it_variant1 occurs 0 with header line.
Internal table for storing the selected values
data it_return type ddshretval occurs 0 with header line.
Internal table for storing the mail-ids
data : begin of it_mailid occurs 0,
kokrs like csks-kokrs,
kostl like csks-kostl,
datbi like csks-datbi,
telx1 like csks-telx1,
end of it_mailid.
Internal table for storing the mail-ids
data : it_mailid1 like it_mailid occurs 0 with header line.
SELECTION SCREEN *
data : v_char type char50.
selection-screen begin of block b1 with frame title text-001.
select-options: s_email for v_char no intervals
lower case
no-display.
select-options: s_email1 for v_char no intervals
lower case
no-display.
selection-screen end of block b1.
selection-screen begin of block a1 with frame title text-028.
selection-screen begin of line.
parameters : p_c1 as checkbox.
selection-screen comment 3(66) text-026 for field p_c1.
selection-screen end of line.
parameters : p_set like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara1 type rs38m-selset.
selection-screen end of block a1.
selection-screen begin of block a2 with frame title text-029.
selection-screen begin of line.
parameters : p_c2 as checkbox.
selection-screen comment 3(56) text-027 for field p_c1.
selection-screen end of line.
parameters : p_set1 like tsp1d-papart matchcode object zh_tsp1d.
selection-screen skip 1.
parameters : p_vara2 type rs38m-selset.
selection-screen end of block a2.
AT SELECTION SCREEN ON VALUE REQUEST
at selection-screen on value-request for p_vara1.
For fetching the variants available for the program
perform fetch_variants.
at selection-screen on value-request for p_vara2.
For fetching the variants available for the program
perform fetch_variants1.
AT SELECTION SCREEN
at selection-screen.
For Validation
perform validation.
START OF SELECTION *
start-of-selection.
To get the output data and mail
perform fetch_data.
END OF SELECTION *
end-of-selection.
if f_spool = c_x.
message e000 with 'Spool Not Generated'(060).
endif.
*& Form fetch_data
To get the output data and mail
form fetch_data .
To send the output to spool
perform generate_spool.
endform. " fetch_data
*& Form generate_spool
To send the output to spool
form generate_spool .
data: l_params like pri_params,
l_days(1) type n value 2,
l_count(3) type n value 1,
l_valid type c,
l_valid1 type c,
l_params1 like pri_params.
data: l_device type usr01-spld.
*Get the printer name for the user
select single spld into l_device from usr01 where bname = sy-uname.
if l_device is initial.
l_device = 'LOCL'.
endif.
For report-1
if p_c1 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 255
LINE_COUNT = 65
layout = p_set
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params
valid = l_valid.
if l_valid <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit rkaep000 to sap-spool
using selection-set p_vara1
spool parameters l_params
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
f_spool = c_x.
if p_c2 is initial.
stop.
endif.
else.
Checking the format ( ABAP/OTF)
perform format_check tables s_email.
endif.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
For Report-2
if p_c2 = 'X'.
Setting the print parameters
call function 'GET_PRINT_PARAMETERS'
exporting
destination = l_device
copies = l_count
list_name = sy-uname
list_text = 'SUBMIT ... TO SAP-SPOOL'(008)
release = c_x
new_list_id = c_x
expiration = l_days
LINE_SIZE = 200
LINE_COUNT = 65
layout = p_set1
sap_cover_page = space
cover_page = space
receiver = 'SAP*'(010)
department = 'System'(011)
no_dialog = c_x
importing
out_parameters = l_params1
valid = l_valid1.
if l_valid1 <> space.
clear v_spool.
Fetch the spool number b4 submit
perform fetch_recent_spool using v_spool.
Submitting the program to spool
submit gp3diehxy88snfj0391v7kf9ek7050 to sap-spool
using selection-set p_vara2
spool parameters l_params1
without spool dynpro
and return.
clear v_spool1.
Fetch the spool number after submit
perform fetch_recent_spool using v_spool1.
if v_spool = v_spool1.
message e000 with 'Spool Not Generated'(060).
stop.
endif.
Checking the format ( ABAP/OTF)
perform format_check tables s_email1.
else.
message e000 with 'Problem in print settings'(003).
stop.
endif.
endif.
endform. " generate_spool
*& Form fetch_recent_spool
Fetch the recent spool number generated
form fetch_recent_spool using p_v_spool type tsp01-rqident .
data: l_user like tsp01-rq2name.
clear : v_rqident,
v_rqclient,
v_rqo1name.
l_user = sy-uname.
Get latest Spool No
select single rqident
rqclient
rqo1name
into (v_rqident , v_rqclient , v_rqo1name)
from tsp01
where rqcretime = ( select max( rqcretime )
from tsp01
where rq2name eq l_user
and rqfinal eq '.' ).
if sy-subrc = 0 .
p_v_spool = v_rqident.
endif.
endform. " fetch_recent_spool
*& Form format_check
Checking the format ( ABAP/OTF)
form format_check tables p_s_email structure s_email.
data : l_objtype like rststype-type.
call function 'RSTS_GET_ATTRIBUTES'
exporting
authority = 'SP01'(019)
client = v_rqclient
name = v_rqo1name
part = 1
importing
objtype = l_objtype
exceptions
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if l_objtype(3) = c_otf.
Convert OTF Spool to PDF
perform convert_otf2pdf tables p_s_email.
else.
Convert ABAP Spool to PDF
perform convert_abap2pdf tables p_s_email.
endif.
endform. " format_check
*& Form convert_otf2pdf
Convert OTF Spool to PDF
form convert_otf2pdf tables p_p_s_email structure s_email .
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to get the PDF format
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page format
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_otf2pdf
*& Form convert_abap2pdf
Convert ABAP Spool to PDF
form convert_abap2pdf tables p_p_s_email structure s_email.
clear it_pdf.
refresh it_pdf.
data : l_bytecount type i.
Fn. to convert to PDF format
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = v_rqident
no_dialog = 'X'
importing
pdf_bytecount = l_bytecount
tables
pdf = it_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
if sy-subrc = 0.
For page formatting
perform page_format tables p_p_s_email.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " convert_abap2pdf
*& Form send_mail
For sending mail
form send_mail tables mail structure s_email .
Structures and internal tables for the send data
data: objpack like sopcklsti1 occurs 2 with header line,
objhead like solisti1 occurs 1 with header line,
objbin like solisti1 occurs 0 with header line,
objtxt like solisti1 occurs 10 with header line,
reclist like somlreci1 occurs 5 with header line.
data: doc_chng like sodocchgi1,
tab_lines like sy-tabix.
Data for the status output after sending
data: sent_to_all like sonv-flag.
clear: it_reclist, it_reclist[],
it_objtxt , it_objtxt[],
it_objpack, it_objpack[],
it_objbin , it_objbin[],x_doc_chng.
loop at it_html.
objbin-line = it_html-line.
append objbin.
clear objbin.
endloop.
Create the document which is to be sent
doc_chng-obj_name = 'List'(012).
doc_chng-obj_descr = 'Mail'(013).
Heading
objtxt-line = 'Mail with pdf attachment'(014).
append objtxt.
clear objtxt.
Size
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
Fill the fields of the packing_list for the main document:
clear objpack-transf_bin.
The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'(015).
append objpack.
Create the attachment (the list itself)
describe table objbin lines tab_lines.
Fill the fields of the packing_list for the attachment:
objpack-transf_bin = 'X'.
Header
objpack-head_start = 1.
objpack-head_num = 0.
Body
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'PDF'(016).
objpack-obj_name = 'Attachment'(017).
objpack-obj_descr = 'Mail with pdf Attachment'(018).
objpack-doc_size = tab_lines * 255.
append objpack.
*-Fill the mail recipient list
loop at mail.
reclist-receiver = mail-low.
reclist-rec_type = c_u.
append reclist.
clear: reclist,
mail.
endloop.
*-Send the document by calling the SAPoffice API1 module for sending
*-documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = doc_chng
put_in_outbox = c_x
commit_work = c_x
importing
sent_to_all = sent_to_all
tables
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
case sy-subrc .
when 0.
message i000 with 'Mail has been sent successfully'(006).
when others.
message e000 with 'Problem in sending the mail'(023).
endcase.
endform. " send_mail
*& Form page_format
For page foramtting
form page_format tables email structure s_email .
data : l_lines type i,
l_temp(500) type c,
l_offset type p,
l_lineslen(2) type p,
l_mimelen(2) type p,
l_tabix like sy-tabix.
clear : it_xi_pdf,
it_xi_temp.
refresh : it_xi_pdf,
it_xi_temp.
it_xi_pdf[] = it_pdf[].
Reformat the line to 255 characters wide (code from SAP)
clear: l_temp, l_offset, it_xi_temp.
describe table it_xi_pdf lines l_lines.
describe field it_xi_pdf length l_lineslen in character mode.
describe field it_xi_temp length l_mimelen in character mode.
loop at it_xi_pdf.
l_tabix = sy-tabix.
move it_xi_pdf to l_temp+l_offset.
if l_tabix = l_lines.
l_lineslen = strlen( it_xi_pdf ).
endif.
l_offset = l_offset + l_lineslen.
if l_offset ge l_mimelen.
clear it_xi_temp.
it_xi_temp = l_temp(l_mimelen).
append it_xi_temp.
shift l_temp by l_mimelen places.
l_offset = l_offset - l_mimelen.
endif.
if l_tabix = l_lines.
if l_offset gt 0.
clear it_xi_temp.
it_xi_temp = l_temp(l_offset).
append it_xi_temp.
endif.
endif.
endloop.
clear : it_xi_mime,
it_xi_mime[].
loop at it_xi_temp.
it_xi_mime(255) = it_xi_temp-line.
append it_xi_mime.
clear it_xi_mime.
endloop.
Final Data
clear : it_html,
it_html[].
it_html[] = it_xi_mime[].
For sending mail
perform send_mail tables email.
endform. " page_format
*& Form fetch_variants
For fetching the variants available for the program
form fetch_variants .
data : l_program like rs38m-programm value 'RKAEP000',
l_vara1 type dfies-fieldname value 'P_VARA1'.
clear : it_variant1,
it_variant1[].
Get variants
perform get_variants tables it_variant1
using l_program.
F4 Help
if not it_variant1[] is initial.
perform get_f4_help tables it_variant1
using l_vara1
changing p_vara1.
else.
message e000 with 'No variants available for report1'(054).
endif.
endform. " fetch_variants
*& Form validation
For Validation
form validation .
data : l_pro1 like rs38m-programm value 'RKAEP000',
l_pro2 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_c1,
l_c2.
If both check-box are unchecked
if p_c1 is initial
and p_c2 is initial.
message e000 with 'Check any one check-box'(049).
endif.
If checked without varaint
if not p_c1 is initial and p_vara1 is initial.
message e000 with 'Please give any one of the variant for report1'(055).
endif.
If checked without varaint
if not p_c2 is initial and p_vara2 is initial.
message e000 with 'Please give any one of the variant for report2'(061).
endif.
Reading the variant and fetching the mail-ids
if p_c1 = c_x.
l_c1 = '1'.
clear : s_email,
s_email[].
perform read_variants tables it_mailid
s_email
using p_vara1
l_pro1
l_c1.
if s_email[] is initial.
message e000 with 'No Id available for given Cost report1'(066).
else.
sort s_email by low.
delete adjacent duplicates from s_email comparing low.
endif.
endif.
Reading the variant and fetching the mail-ids
if p_c2 = c_x.
clear : s_email1,
s_email1[].
l_c2 = '2'.
perform read_variants tables it_mailid1
s_email1
using p_vara2
l_pro2
l_c2.
if s_email1[] is initial.
message e000 with 'No Id available for given Cost report2'(067).
else.
sort s_email1 by low.
delete adjacent duplicates from s_email1 comparing low.
endif.
endif.
endform. " validation
*& Form GET_VARIANTS
Fetching Variants
form get_variants tables p_it_variant structure it_variant1
using p_v_program type rs38m-programm.
select variant
from varid
into table p_it_variant
where report = p_v_program.
endform. " GET_VARIANTS
*& Form GET_F4_HELP
text
form get_f4_help tables p_it_variant1 structure it_variant1
using p_l_vara1 like dfies-fieldname
changing p_p_vara like p_vara1.
Fn. for Pop-Up
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = p_l_vara1
value_org = 'S'
display = ' '
tables
value_tab = p_it_variant1
return_tab = it_return
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc = 0.
p_p_vara = it_return-fieldval.
else.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " GET_F4_HELP
*& Form FETCH_VARIANTS1
text
form fetch_variants1 .
data : v_program1 like rs38m-programm value 'GP3DIEHXY88SNFJ0391V7KF9EK7050',
l_vara2 type dfies-fieldname value 'P_VARA2'.
clear : it_variant2,
it_variant2[].
Get Variants
perform get_variants tables it_variant2
using v_program1.
F4 Help
if not it_variant2[] is initial.
perform get_f4_help tables it_variant2
using l_vara2
changing p_vara2.
else.
message e000 with 'No variants available for report2'(050).
endif.
endform. " FETCH_VARIANTS1
*& Form read_variants
Reading the variant and fetching the mail-ids
form read_variants tables p_it_mailid structure it_mailid
p_s_email structure s_email
using p_p_vara1 like p_vara1
p_l_pro1 like rs38m-programm
p_l_c1 type c.
data : l_temp(44),
it_valutab like rsparams occurs 0 with header line.
ranges : r_cocen for csks-kostl.
Function Module to get the variant contents
call function 'RS_VARIANT_CONTENTS'
exporting
report = p_l_pro1
variant = p_p_vara1
tables
valutab = it_valutab
exceptions
variant_non_existent = 1
variant_obsolete = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear : r_cocen,
r_cocen[].
loop at it_valutab where selname = 'KOSTL'
or selname = '_C-CCTR'.
Getting the range of cost centers
if it_valutab-option = 'BT'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-high = it_valutab-high.
For Conversion Routine
perform conversion using r_cocen-high.
r_cocen-option = 'BT'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
Getting the single cost centers
if it_valutab-option = 'EQ'.
r_cocen-low = it_valutab-low.
For Conversion Routine
perform conversion using r_cocen-low.
r_cocen-option = 'EQ'.
r_cocen-sign = 'I'.
append r_cocen.
clear r_cocen.
endif.
endloop.
If no cost centers
if not r_cocen[] is initial.
select kokrs
kostl
datbi
telx1
from csks
into table p_it_mailid
where kostl in r_cocen.
if p_it_mailid[] is initial.
if p_l_c1 = '1'.
message e000 with 'No IDs available for report1'(059).
elseif p_l_c1 = '2'.
message e000 with 'No IDs available for report2'(062).
endif.
endif.
Deleting the blank entries
delete p_it_mailid where telx1 = space.
clear l_temp.
read table p_it_mailid index 1.
l_temp = p_it_mailid-telx1.
data : l_check.
loop at p_it_mailid where telx1 <> l_temp.
l_check = c_x.
endloop.
For checking the unique ids
if l_check = c_x.
if p_l_c1 = '1'.
message e000 with 'No unique mail-ids for report1'(058).
elseif p_l_c1 = '2'.
message e000 with 'No unique mail-ids for report2'(065).
endif.
endif.
Populating the IDs for the cost centers
loop at p_it_mailid.
set locale language sy-langu.
translate p_it_mailid-telx1 to lower case.
set locale language space .
concatenate p_it_mailid-telx1 '@allergan.com' into l_temp.
p_s_email-low = l_temp.
p_s_email-sign = 'I'.
p_s_email-option = 'EQ'.
append p_s_email.
clear p_s_email.
endloop.
else.
if p_l_c1 = '1'.
message e000 with 'No Cost Center Available for report1'(057).
elseif p_l_c1 = '2'.
message e000 with 'No Cost Center Available for report2'(063).
endif.
endif.
endform. " read_variants
*& Form CONVERSION
For Conversion Routine
form conversion using p_it_valutab_low type c.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_it_valutab_low
importing
output = p_it_valutab_low.
endform. " CONVERSION
REPORT Z_RMTIWARI_SEND_SPOOL_MAIL_ATT .
PARAMETERS : P_SPOOL TYPE TSP01-RQIDENT OBLIGATORY .
PARAMETERS : P_MAIL TYPE char100 OBLIGATORY .
TYPES : TY_LINE type string.
DATA: IT_ATTACHMENT TYPE soli OCCURS 0 WITH HEADER LINE.
DATA: IT_ATTACHMENT_LONG TYPE TY_LINE OCCURS 0 WITH HEADER LINE.
DATA: LV_PDF_SIZE type i.
DATA: LT_PDF type standard table of tline with header line.
PERFORM SEND_EMAIL USING P_SPOOL P_MAIL.
FORM send_email
--> X_SPOOL_ID
--> X_EMAIL
FORM send_email USING X_SPOOL_ID X_EMAIL.
DATA: LT_OBJPACK LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE,
LT_OBJHEAD LIKE solisti1 OCCURS 1 WITH HEADER LINE,
LT_OBJBIN LIKE solisti1 OCCURS 10 WITH HEADER LINE,
LT_OBJTXT LIKE solisti1 OCCURS 10 WITH HEADER LINE,
LT_RECLIST LIKE somlreci1 OCCURS 5 WITH HEADER LINE,
LV_DOCUMENT_DATA TYPE sodocchgi1.
DATA: L_ATT_LINES TYPE i.
DATA : LV_SPOOL_DESC(68) type c.
CHECK NOT ( X_EMAIL IS INITIAL ).
CLEAR: LT_RECLIST, LT_RECLIST[],
LT_OBJHEAD, LT_OBJHEAD[],
LT_OBJTXT, LT_OBJTXT[],
LT_OBJBIN, LT_OBJBIN[],
LT_OBJPACK, LT_OBJPACK[].
CLEAR LV_DOCUMENT_DATA.
Read spool and get the pdf internal table and name of spool
PERFORM READ_SPOOL USING X_SPOOL_ID LV_SPOOL_DESC.
CHECK NOT ( LT_PDF[] IS INITIAL ).
Convert pdf itab to 255 line itab.
data :LV_COUNTER type i.
data :LV_FROM type i.
loop at LT_PDF.
translate LT_PDF using ' ~' .
concatenate IT_ATTACHMENT_LONG LT_PDF into it_attachment_long.
endloop.
translate IT_ATTACHMENT_LONG using '~ ' .
append IT_ATTACHMENT_LONG.
clear : LV_COUNTER.
DO.
LV_COUNTER = strlen( IT_ATTACHMENT_LONG ).
if LV_COUNTER ge 255.
IT_ATTACHMENT = IT_ATTACHMENT_LONG(255).
append IT_ATTACHMENT.
SHIFT IT_ATTACHMENT_LONG by 255 places.
else.
IT_ATTACHMENT = IT_ATTACHMENT_LONG(lv_counter).
append IT_ATTACHMENT.
exit.
endif.
ENDDO.
Body of email
MOVE 'Email sent to you from SAP' TO LT_OBJTXT.
APPEND LT_OBJTXT.
LV_DOCUMENT_DATA-obj_name = 'SpoolMail'.
Title of the email as spool name
LV_DOCUMENT_DATA-obj_descr = LV_SPOOL_DESC.
LV_DOCUMENT_DATA-sensitivty = 'O'.
LV_DOCUMENT_DATA-expiry_dat = SY-datum + 15.
LV_DOCUMENT_DATA-doc_size = STRLEN( LT_OBJTXT ).
e-mail body
CLEAR LT_OBJPACK.
LT_OBJPACK-head_start = 1.
LT_OBJPACK-head_num = 0.
LT_OBJPACK-body_start = 1.
LT_OBJPACK-body_num = 1.
LT_OBJPACK-doc_type = 'RAW'.
LT_OBJPACK-doc_size = STRLEN( LT_OBJTXT ).
APPEND LT_OBJPACK.
For e-mail attachment
DESCRIBE TABLE IT_ATTACHMENT LINES L_ATT_LINES.
READ TABLE IT_ATTACHMENT INDEX L_ATT_LINES.
CLEAR LT_OBJPACK.
LT_OBJPACK-transf_bin = 'X'.
LT_OBJPACK-head_start = 1.
LT_OBJPACK-head_num = 1.
LT_OBJPACK-body_start = 1.
LT_OBJPACK-body_num = L_ATT_LINES.
LT_OBJPACK-doc_type = 'PDF'.
LT_OBJPACK-obj_name = 'email'.
LT_OBJPACK-obj_descr = LV_SPOOL_DESC.
LT_OBJPACK-doc_size = ( 255 * ( L_ATT_LINES - 1 ) ) + STRLEN( IT_ATTACHMENT-line ).
APPEND LT_OBJPACK.
make recipient list
LT_RECLIST-receiver = X_EMAIL.
LT_RECLIST-rec_type = 'B'. "To external email id
APPEND LT_RECLIST.
send mail with attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = LV_DOCUMENT_DATA
put_in_outbox = 'X'
TABLES
packing_list = LT_OBJPACK
object_header = LT_OBJHEAD
contents_bin = IT_ATTACHMENT
contents_txt = LT_OBJTXT
receivers = LT_RECLIST
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
If SY-subrc = 0.
write:/ 'Message sent'.
else.
write:/ 'Error encountered'.
endif.
ENDFORM. " send_email
*& Form read_spool
FORM read_spool USING X_SPOOL_ID Y_SPOOL_DESC.
DATA : LV_SPOOL_TYPE TYPE TSP01-RQDOCTYPE.
SELECT SINGLE RQDOCTYPE RQTITLE
INTO (lv_spool_type, y_spool_desc)
FROM TSP01
WHERE RQIDENT eq X_SPOOL_ID.
IF Y_SPOOL_DESC IS INITIAL.
concatenate 'Spool-' X_SPOOL_ID into Y_SPOOL_DESC.
ENDIF.
IF LV_SPOOL_TYPE eq 'LIST'. " If spool is a list
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID -
The message "Exchange server is not responding. Try again later." appears on our E75's and is quite common. Is there a way to kickstart MfE to start the connection to our mail server again?
I suggest updating firmware to the latest release (201.12.01) with NSU or FOTA: http://nokia.com/softwareupdate
-
comment changer l adresse mail de destination pour la reinitialisation des questions secretes ? merci d avance.
Sebdo377 wrote: (Google Translate)
how to change the email address destination for reinitialization of secret questions? thank you in advance.
Rescue email address and how to reset Apple ID security questions
Hope this helps/Espérons que cela aide. -
Very Odd Issue Using Mail and Comcast
I have been unable to send email from my Comcast email account in Apple Mail. It shows emails as having been sent fine, but they don't arrive at the other persons mailbox. I have tried sending test emails to myself, to no avail. I tried trashing the preference file, which cleared up the issue, only for it to return several hour (or even minutes) later. This issue is particularly annoying because one would never know it exists. All emails sent from this account appear to send fine, with no errors being reported, but never are sent. I can send emails fine from my gmail account using Apple Mail, and for experimental purposes I tried Thunderbird, which worked fine. The SMTP server is clearly not the issue. I tried other servers, including the local server, using RapidoSMTP, but still, the same issue. Just a note: I can recieve emails on that account, but not send them. My installed plugins for Mail are: AttachmentScanner, MailFollowup, and Growl Mail. If anyone can offer any tips on resolving this weird issue, please share them.
If Mail put the message in Sent, that means the outgoing (SMTP) server told Mail that the message would be delivered. If the message never reached its destination, it could be because the SMTP server didn’t fulfill its promise or because the message was filtered out by either the recipient’s incoming mail server or the recipient’s mail client for some (probably spam-related) reason.
Check that your System Preferences > Date & Time settings are correct. An invalid timestamp in the message headers could be the reason one of the servers involved is rejecting those messages.
It’s strange that the problem happens with Mail, but not with other mail clients such as Thunderbird, though. I can only guess there is something about the way the messages are composed/encoded when you use Mail that causes them to be considered spam at some point. If you compose those messages as Rich Text, try composing them as Plain Text instead. -
Hi,
I work in a not-very-Mac-friendly school district, but use a Mac anyway. We've figured out how to open the correct ports, etc. for internet use (via Network Preferences) but still can't access email (on an MS Exchange server) or any POP mail (Yahoo) or .mac mail through the mail program. I'm guessing it's something with a port somewhere that needs to be opened. Any thoughts on what it might be, or how to open ports on Mail?
Thanks for any help anyone might offer.
-WidgetFrom the client side, you don't need to open any ports in Sys Prefs Sharing at all. Opening ports there is only for dealing with inbound traffic that you didn't initiate and weren't expecting as a response to something, i.e., if you were a mail or web server. But you're not a server, you're a client. So close 'em. Plus, in Mail.app (or any other application for that matter), those port numbers (like 25 or 587 or 465 for smtp, or 110 or 995 for pop, or 143 or 993 for imap) are at the destination mailserver, not your computer.
If you launched Terminal.app, "su {adminUserName}" and "sudo tcpdump -i en1" (en1 if wireless, en0, if ethernet cable) you will find that when you launch Mail and try to check mail or send mail, stuff from your computer is leaving your machine on a randomly chosen (by Mail.app) five-digit port number and it's at the destination server where these port numbers (25, 587, 465, 110, 995, 143, 993) have any meaning. Same holds true for all applications, e.g. Safari, port 80 refers to the web server, not what port on which you are sending out your browser request to the server. The (mail, web, other) server responds back from its port (25, 143, ..., 80, etc.) port to the random port number that your application chose.
Your problem, most likely, is that your IT Dept is blocking outbound traffic destined for any "foreign" host addresses at ports like 25 or 143, that are NOT the host addresses of your IT Dept's own mailservers. They would be blocking this at their firewall to the internet. My work's IT Secret Police does this. So unless they relax their firewall restrictions, you're going to have to do something like use your cellphone as a dialup modem to access those mail accounts, or use webmail (since they probably aren't blocking all http (destination server) port 80 traffic -- although they could be blocking traffic addressed to specific host addresses like yahoo.com/webmail). -
I originally encrypted my hard disk. instead of just reformatting. I deleted hardisk entirely. Now I cant login. or do anything. I am in Afghanistan so internet is slow, so I cant reinstall lion software via internet. I cant send it in the mail, and there surely isnt a apple store around here. HELP!!
Didn't want to make you feel like an Idiot. Just pointing otu that most all externals come, these days, formatted NTFS as the world runs on Windows computers and at least the last 2 Win OS version will only install and likes to use NTFS formatted drives. So most drive manufacturers Pre-Format their drive in that format.
What do you mean "I'm Cloning Time Now"? I don't get the TIME reference?
You Clone the install of OS X from a working Mac to the External. The Cloning willl make that external Bootable (It will boot on like Mac computers).
Then when that is done disconnect that external and connect it to your Mac. Start your Mac and it should boot off that external. If it doesn't then Restart and hold down the Option key and select the external as the boot drive.
Once the your Mac starts from the external the cloning program should already by running as it was running whenn the clone was made. Select the external as the source and your internal as the destination. you may want to shut the cloning program down and first use Disk Utility to Re-Partition your drive as One Partition.
Hopefully that will get rid of the encryption you enabled and give you a clean freshly formatted drive to clone to.
Then start up the cloniing software and do as pointed out above. -
Mac OSX Mail and deleting "undeliverables"
We receive (too much) junk in our Mail program; normally we “bounce” it back but most of the time it comes back as: (From) Mail Delivery System; (Subject) Undeliverable Mail Returned to Sender. The normal next step has been to delete the returned mail, and then empty the trash.
We have two Mac minis. I run OSX (10.4.7) and Mail (Version 2.1 (752/752.2)).
On my wife’s Mac mini, over the last week plus, every time we take the delete/trash steps, the file pops back up in the Inbox. When we delete/trash the file again it immediately reappears in the Inbox.
I don’t want to trash the Account and start over because there is a lot of “good” mail she needs. Help!!
Pete FWhy do you people keep bouncing spam?
If the bounce doesn't reach the destination, it's just a waste of time and bandwith, plus a source of problems, because in all likelihood it'll be bounced back to you.
If the bounce reaches the destination, then it's even worse, because you're either (1) telling the spammer that your address is valid and that you're willing to spend time on his/her/its junk, or (2) contributing to the spammer's effort by sending his/her/its junk to the innocent whose address was stolen for sending it (and who, in turn, might end up posting in a forum such as this wondering why does he/she receive bounces for messages he/she hasn't sent).
So what exactly is the point of bouncing spam? Don't you have anything better to do with your time?
OK, enough ranting. Back to the problem, to fix it you must re-create Envelope Index. Problem is, Mail may choke on those messages while re-creating the index, so either be prepared for that or perform optional steps 1 and 3:
1. (Optional, but recommended). Assuming this is a POP account, try to find in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/ the *.emlx files associated with the troublesome messages. Viewing the *.emlx files as List in the Finder showing the creation/modification date may help. Just identify them; do not get rid of them yet (you must quit Mail first).
2. Quit Mail.
3. (Optional, but recommended). If you found the troublesome *.emlx files in step 1, move them to the Trash.
4. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
5. Locate the Envelope Index file and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
6. In the Finder, go to ~/Library/Mail/POP-username@mailserver/. Locate Deleted Messages.mbox, and move it to the Trash. I assume there is nothing to be preserved there.
7. Open Mail. It will tell you that your mail needs to be "imported". Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it's "importing", but it just re-creates the index if the mailboxes are already in Mail 2.x format.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder. -
Transfer mail and contact from an old account to a new one ?
Hi,
The employe from the company where I got my internship are currently using mail address that are like [email protected] and the company wants them to
use the new mail address [email protected] (in both case the employee are using outlook).
The problem is that they would like to keep their old mail and contact. I know you can do a manual archive but can you import it in a new account ? Will it also
save the contact of the user ? Since it's a new account with a new domain, I really have no idea how to transfer mail and contact from the old account to the new one.
Best regards,
DimitriThis step-by-step article describes how to copy or how to move your Personal Address Book (PAB) from one computer to another
computer.
On all installations, including those with no e-mail accounts, Microsoft Outlook creates a default Outlook Address Book. The Outlook
Address Book consolidates all your Outlook Contacts folders. The Outlook Address Book is a virtual address book instead of a physical address book because Outlook does not store the Outlook Address Book as a file that is separate from your data store. The
Outlook Address Book provides a view to your Contacts folders.
Unlike the Outlook Address Book, a personal address book (PAB) is a physical address book that Outlook stores on disk that is separate
from your data store. You can add one PAB to an e-mail profile, and use the PAB to store additional contact information.
You can use the PAB to store personal addresses or to store other contact information that you want to keep separate from your other
Outlook data. Additionally, you can use a PAB to share addresses with other users. The PAB uses a .pab file name extension, and Outlook creates the PAB file when you add the PAB to your e-mail profile.
How to identify the PAB file that your e-mail profile uses
Start Outlook.
On the Tools menu, click E-mail Accounts.
Under Directory, click View or change existing directories or address books, and then click Next.
Under You can choose a directory or address book below to change or remove it, click Personal Address Book, and then
click Change.
Note the path of your PAB file that is in the Path box. You will require this information to find the PAB file in step 3 in the "How to copy the PAB file to
a second computer" section of this article.
For example, C:\Exchange\Mailbox.pab indicates that a PAB named Mailbox.pab is located on a Microsoft Exchange folder on your drive C.
Click OK, and then click Finish to close all dialog boxes.
On the File menu, click Exit.
How to copy the PAB file to a second computer
Quit all e-mail programs.
Start Microsoft Windows Explorer.
In the Folders pane, expand the folders to locate the PAB file whose path you took note of in step 5 in the "How to identify the PAB File that your e-mail profile
uses" section of this article.
Copy the PAB file to a 3.5 inch disk, and then use that disk to copy the PAB file to the second computer. Note the path of the PAB file on the second computer.
For example, if you copy the PAB file named Mailbox.pab to a folder that is named Address Book on drive C, the path of the address book is as follows:
C:\Address Book\Mailbox.pab
Alternatively, if your two computers are on the same network, you can copy the PAB file from the source computer to a network share on the second computer.
For more information about how to perform this task in Microsoft Windows, see your Windows printed documentation or your online Help.
Note You can save the PAB file in any folder on the destination computer as long as you remember the location.
How to configure your second computer to use the new PAB file
If you do not have the Personal Address Book service in your e-mail profile on the second computer, you must add the service before
you can add the new PAB file to your profile. To add the Personal Address Book service for the new PAB file, follow these steps:
Start Outlook.
On the Tools menu, click E-mail Accounts.
Under Directory, click Add a new directory or address book, and then click Next.
Click Additional Address Books, and then click Next.
In the Additional Address Book Types box, click Personal Address Book, and then click Next.
In the Path box, type the path of the PAB file that you copied to the second computer in step 4 in the "How to copy the PAB file to a second computer" section
of this article. Alternatively, you can click Browse to locate the PAB file.
Click OK.
If you receive the The E-mail account you have just added will not be start until you choose Exit from the file menu, and then restart Outlook prompt, click OK.
On the File menu, click Exit, and then restart Outlook. Your new PAB is now available.
If you have the Personal Address Book service in your e-mail profile on the second computer, you can change the service to use the
new PAB file. To change an existing Personal Address Book service to use the new PAB file, follow these steps:
On the second computer, start Outlook.
On the Tools menu, click E-mail Accounts.
Under Directory, click View or change existing directories or Address Books, and then click Next.
In the Outlook processes e-mail for these accounts in the following order list, click Personal Address Book, and
then click Change.
On the Personal Address Book tab, type the path of the PAB file that you copied to the second computer in step 4 in the "How to copy the PAB file to a second
computer" section of this article. Alternatively, you can click Browse to locate the PAB file.
Click the PAB file, click OK, and then click Finish.
On the File menu, click Exit.
Quit and then restart Outlook. Your new PAB is now available.
Note There can be only one Personal Address Book service per e-mail profile. There is not a method for merging
one PAB file with another. You can use the Outlook Import and Export Wizard to merge the active PAB entries in your Contacts folder.
Additionally, you can add both recipients and distribution lists to contacts that are in the Personal Address Book interface in
Microsoft Office Outlook 2003.
For more information about the Outlook Import and Export Wizard, click Microsoft
Office Outlook Help on the Help menu,
type Outlook Import and Export Wizard in
the Search for box
in the Assistance pane, and then click Start searching to
view the topic. -
Hi i have recently purchased the e75, within 4 hours and my battery is empty. Also use mail and Bluetooth. Battery performance is very poor for business usage. Also have problems with syncing email. Sometimes no email will be synced, have to restart my phone than. Any others see the same problems? Can some help!!!
Regards
Subbakumar (Kumarapandian R)
Best Regards & Thanks well in Advance
Subbakumar (Sandee)
*************************Miles to go before i sleep****************************
Solved!
Go to Solution.One other thing, you might want to do is to purchase Handy Taskman (forgot the site address). This app will tell you what is active and running so you can individually close any apps that you do not want to run. By the way, if you have Fring installed, it will automatically default to start and run in the background. I can promise you for sure that Fring will kill your battery in less than one day.
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4 -
Mail and Safari still freeze all the time-help
Even with the latest Mavericks updates, Apple mail and Safari freeze contstantly to the point that I can't send email or use Safari. I had after the initial mavericks release gotten mail to function by shutting off 2 Gmail accounts I had on my MacPro. After the update that supposedly fixed the Gmail issues, I turned on my Gmail accounts and Mail started freezing almost immediately on startup. Was able to get in and shut the accounts don again, but Mail keeps freezing. I even removed the Gmail accounts from Mail prefs, but that didn't help either. I can usually get Mail to launch and for the most part can read email, but if I try to respond, once i type and email and try to send, Mail freezes and I have to force quit. Once Mail hangs Safari hangs shortly thereafter or if it's not even launched I can't launch.
I have been using macs for a long time and have never had such a bad time with an upgrade. Have tried most of the solutions posted, and am baffled as to how to make things work.
Any suggestions welcome.here's your report with some comments in red:
Hardware Information:
Mac Pro (Early 2009)
Mac Pro - model: MacPro4,1
1 2.66 GHz Quad-Core Intel Xeon CPU: 4 cores
8 GB RAM
Video Information:
NVIDIA GeForce GT 120 - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
DynDNSUpdater: Path: /Library/StartupItems/DynDNSUpdater these may be a problem. See comments below.
EyeConnect: Path: /Library/StartupItems/EyeConnect
ProTec6b: Path: /Library/StartupItems/ProTec6b
VirtualBox: Path: /Library/StartupItems/VirtualBox
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 1:6:49
Disk Information:
HL-DT-ST DVD-RW GH41N
WDC WD6400AAKS-41H2B0 disk1 : (640.14 GB)
EFI (disk1s1) <not mounted>: 209.7 MB
MacPro HD (disk1s2) /: 639.28 GB (305.06 GB free)
Recovery HD (disk1s3) <not mounted>: 650 MB
Hitachi HDS721010CLA332 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Internal 1TB HD (disk0s2) /Volumes/Internal 1TB HD: 999.86 GB (16.64 GB free)
USB Information:
Apple Computer, Inc. Apple Cinema Display
Apple, Inc. Keyboard Hub
Logitech USB Receiver
Apple, Inc Apple Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Initio ST380013A 400mbit - 400mbit max
disk3s1 (disk3s1) <not mounted>: 32 KB
80GB MadDog (disk3s3) /Volumes/80GB MadDog: 79.89 GB (1.89 GB free)
Oxford Semiconductor Ltd. OXFORD IDE Device 400mbit - 400mbit max
disk5s1 (disk5s1) <not mounted>: 32 KB
disk5s2 (disk5s2) <not mounted>: 51 KB
OWC Mercury Express (disk5s3) /Volumes/OWC Mercury Express: 20 GB (1.5 MB free)
OWC Mercury Elite Pro AL OXFORD IDE Device 1 400mbit - 400mbit max
disk2s1 (disk2s1) <not mounted>: 32 KB
disk2s2 (disk2s2) <not mounted>: 29 KB
disk2s3 (disk2s3) <not mounted>: 29 KB
disk2s4 (disk2s4) <not mounted>: 29 KB
disk2s5 (disk2s5) <not mounted>: 29 KB
disk2s6 (disk2s6) <not mounted>: 262 KB
disk2s7 (disk2s7) <not mounted>: 262 KB
disk2s8 (disk2s8) <not mounted>: 262 KB
OWC Mercury Elite (disk2s10) /Volumes/OWC Mercury Elite : 249.92 GB (20.51 GB free)
WD My Book 800mbit - 800mbit max
disk4s1 (disk4s1) <not mounted>: 32 KB
My Book (disk4s3) /Volumes/My Book: 1 TB (155.85 GB free) Big Problem. WD drives have software (and firmware) on them which are incompatible with Macs. I would rip the drive out of this, erase it, and put it in another (non-WD) enclosure, smash the WD enclosure to bits with a sledgehammer, and mail it back to WD.
Thunderbolt Information:
The next categories are loaded at startup and are potential causes for poor performance, as they run all the time, in the background. The green ones are potential problems, the red ones are definite problems. See below for my suggestions.
Kernel Extensions:
com.rogueamoeba.InstantOn (6.0.4 - SDK 10.8) Pretty sure the rogue amoeba stuff is not compatible with Mavericks yet.
com.Logitech.Control Center.HID Driver (3.2.0)
com.Logitech.Unifying.HID Driver (1.1.0)
org.virtualbox.kext.VBoxDrv (4.2.6)
org.virtualbox.kext.VBoxUSB (4.2.6)
com.rogueamoeba.InstantOnCore (6.0.4 - SDK 10.8)
com.logmein.driver.LogMeInSoundDriver (1.0.2 - SDK 10.5)
com.Cycling74.driver.Soundflower (1.5.3 - SDK 10.6)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.acquia.drupal.apache0.plist
[loaded] com.acquia.drupal.mysql0.plist
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.barebones.authd.plist
[loaded] com.barebones.textwrangler.plist
[loaded] com.cocoatech.pathfinder.SMFHelper.plist
[loaded] com.google.keystone.daemon.plist this is spyware from Google.
[not loaded] com.logmein.logmeinblanker.plist
[loaded] com.logmein.logmeinserver.plist
[loaded] com.logmein.raupdate.plist
[loaded] com.memeo.WDMemeod.plist
[loaded] com.microsoft.office.licensing.helper.plist
[invalid] com.oracle.java.Helper-Tool.plist
[loaded] com.quark.quarkupdate.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.AdobeCreativeCloud.plist
[loaded] com.adobe.CS4ServiceManager.plist
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.extensis.FMCore.plist
[loaded] com.google.keystone.agent.plist spyware from Google
[loaded] com.Logitech.Control Center.Daemon.plist
[failed] com.logmein.LMILaunchAgentFixer.plist
[loaded] com.logmein.logmeingui.plist
[loaded] com.logmein.logmeinguiagent.plist
[not loaded] com.logmein.logmeinguiagentatlogin.plist
[invalid] com.oracle.java.Java-Updater.plist
[loaded] com.quark.quarkupdate.agent.plist
[loaded] com.wacom.wacomtablet.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.[...].plist
[loaded] com.akamai.client.plist
[loaded] com.akamai.single-user-client.plist
[loaded] com.facebook.videochat.[redacted].plist
[not loaded] com.linotype.FontFolderProtector.plist
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist This may be the majority of your problem. CleanMyMac is second only to MacKeeper in the royalty of crapware. MacKeeper is the King of Crapware. Crapware is stuff like "cleaners', "optimizers", "defragmenters". Unnecessary on macs, usually poorly written, often harmful to your OS. Can be impossible to uninstall. Popular with recent converts from the Windows world. CleanMyMac should really be called "TakeABigShitOnMyMac". Needs to be uninstalled.
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist
[not loaded] org.virtualbox.vboxwebsrv.plist
[loaded] ws.agile.1PasswordAgent.plist
User Login Items:
iTunesHelper
BusyCalAlarm
Reminder
Reminder two of these can't be good.
Dropbox
AdobeResourceSynchronizer
ConnectService
SFCoreHelper
3rd Party Preference Panes:
Akamai NetSession Preferences
Default Folder X
EyeConnect
Flash Player
Flip4Mac WMV
Logitech Control Center
MacFUSE
Microsoft Mouse
MusicManager
Quark Update Preferences
WacomTablet
Internet Plug-ins::
OfficeLiveBrowserPlugin: Version: 12.3.2
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
Flash Player: Version: 11.9.900.152 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
LogMeInSafari32: Version: 1.0.961 - SDK 10.7
EPPEX Plugin: Version: 3.0.5.0
WidevineMediaOptimizer: Version: 6.0.0.12607 - SDK 10.7
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17
Silverlight: Version: 5.1.20125.0 - SDK 10.6
LogMeIn: Version: 1.0.961 - SDK 10.7
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.2.4
SharePointBrowserPlugin: Version: 14.1.4 - SDK 10.6
WacomSafari: Version: 1.1.0-5
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
WacomNetscape: Version: 1.1.0-5
User Internet Plug-ins::
fbplugin_1_0_3: Version: (null)
DazzboardNPAPIPlugin: Version: 0.9.18
fbplugin_1_0_1: Version: (null)
Bad Fonts:
None
Old applications: you have a lot of these. Make sure they are all up to date.
Audacity: Version: 2.0.3.0 - SDK 10.4
/Applications/Audacity/Audacity.app
DockPlistEdit: Version: 7.0 - SDK 10.5
/Library/Parallels/Uninstaller/Parallels Hypervisor/DockPlistEdit.app
FacebookVideoCalling: Version: 1.2.0.157 - SDK 10.5
/Users/jeffreysternMacPro/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
Freeway 5: Version: 5.6.5 - SDK 10.5
/Applications/Freeway 5.5 Pro.app
Intaglio: Version: 3.4.2 - SDK 10.5
/Applications/Intaglio.app
Microsoft Alerts Daemon: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft Chart Converter: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Excel: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Upload Center: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
My Day: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
Pages: Version: 4.3 - SDK 10.5
/Applications/iWork '09/Pages.app
QuarkUpdate: Version: 1.1.0.1 - SDK 10.5
/Library/Application Support/Quark/AutoUpdate/QuarkUpdate.app
RockMelt: Version: 0.16.91.371 - SDK 10.5
/Applications/RockMelt.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
SyncServicesAgent: Version: 14.1.4 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
XLD: Version: 20120407 - SDK 10.4
/Users/jeffreysternMacPro/Downloads/xld-gui-20120407/XLD.app
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
dynamiclinkmediaserver: Version: 6.0.1 - SDK 10.5
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
MacPro HD: Disk size: 595.37 GB Disk used: 311.26 GB
OWC Mercury Elite : Disk size: 232.76 GB Disk used: 213.66 GB
My Book: Disk size: 931.39 GB Disk used: 786.24 GB
Destinations:
Internal 1TB HD [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 124
Oldest backup: 2012-01-01 05:49:38 +0000
Last backup: 2013-12-09 00:35:29 +0000
Size of backup disk: Too small
Backup size 931.19 GB < (Disk used 1 X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% EtreCheck
1% WindowServer
1% Mail
0% LCCDaemon
0% 2BUA8C4S2C.com.agilebits.onepassword4-helper
Top Processes by Memory:
393 MB mds_stores
Maybe you are looking for
-
Automatically shut down during windows 8.1 update (at the time of setting up)
I faced the problem 5-6 times ...as I can't update win 8.1. After completion of win 8.1 download when it restarts and at the time of setting up it shuts down automatically...(after setting up 25%..15%...etc...).
-
Hello, I am a new user for Oracle 11g. After the successful installation when I tried to Logging to SQL Plus Command Prompt with username and Password .Its throws the following set of errors Error Message Enter user-name: myOracle Enter password: ERR
-
Need help serializing an AbstractTableModel for a JTable with cell editing.
Fun times are ahead. Here we go! I have a JTable that contains data I'd like to serialize out to a file to be restored and viewed later. So I tried saving the AbstractTableModel subclass out to a file. Whenever I do this, I get the following error me
-
can't get my library bookshelf on my Nook Color, can someone help? I may have too many activations, but already changed password 3 times. I just have too many entries into adobe ID account, don't know what to do:-(
-
How to Detect the Target Plataform
Hi, I am new to Mobile Development I am using flash Builder 4.5.1. How can I detect the running target plataform so that I can adjust width and heights and adjust the layout of the components. Thanks in advance