E75 memory issues - now phone wont start

I configured my new E75 yesterday to access Microsoft Exchange, all at first appeared okay. After my email, contacts, and calendar sync the phone reported that is was low on memory and that I should make space. I reduced the amount of email and calendar traffic that was synced but this did not fix the problem. Over night three more emails arrived and the phone then said that it had deactivated Exchange. The phone became very slow and the 'menu' and 'contacts' key disappeared from the screen. I then did a soft rest on the phone (*#7370#) which made no difference. I then searched the forum and found that the hardware reset (press green, 3, and *) and this did not do anything. The was reporting that some much stuff was now not working. I then managed to enter the hardware rest code *#7780# and the phone powered off and restarted. Now it will not boot, just shows the Nikia logo....
Help!!!!!!
Solved!
Go to Solution.

Try removing the memory card. See if it will reboot. If so, put the card back in and try again.
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Similar Messages

  • Satellite U400-14B shuts itself off and now it wont start up

    Hi
    just got a new Satellite U400 this week.
    Was working perfectly the first few days, then last night, it just shuts itself off and now it wont start up.
    I press the on button and the row of lights next to it light up, but nothing happens I dont even get as far as the Toshiba screen.
    I have tried many things. I left it plugged in overnight, tried taking the battery out and no result as of now.
    The little led lights on the bottom indicate that there its plugged in, the battery is white not orange, when pressed they all light up again only for a split second.
    The only thing I can liken this too is when a car wont start and you keep turning and turning the key, well in this case pushing a button, and nothing happens, the fans dont whir or anything...
    help please...

    Has extra Memory (RAM) been installed? Try removing one Memory Module and try a different Memory Slot.
    If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.

  • Im up dating my i phone to iOS 6 then my baterry completely drain i forget to plug my charger,when i re charged my battery for 12 hrs my i phone wont start again i try to conect to my computer but it cant be read also.pls help

    im up dating my i phone to iOS 6 then my baterry completely drain i forget to plug my charger,when i re charged my battery for 12 hrs my i phone wont start again i try to conect to my computer but it cant be read also.pls help

    Thanks too all the people who responded. . . . (noone)
    Got it sorted though. Seems that Apple has issues with multiple apple id's.
    Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
    Even after that it was extremely hard to get my apps back on my PC.
    If anyone else has the same problem. . . .email Apple. Cya.

  • I'm trying to order a calendar off iphoto and have never had any issues, now it wont allow me to input a canadian address for ordering  help help help this is an xmas gift and i have no idea how to fix this have tried numerous things

    I'm trying to order a calendar off iphoto and have never had any issues, now it wont allow me to input a canadian address for ordering  help help help this is an xmas gift and i have no idea how to fix this have tried numerous things

    No I didn't even read through your post, to long.
    You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
    Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
    Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

  • Installed IOS 7 now phone wont connect to my wifi

    installed IOS 7 now phone wont connect to my wifi. I keep getting "unable to join network". Am i missing something? Computer is connected to the wifi and the password is correct.

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W.

  • After a phone reset,apple logo appears but phone wont start

    After a phone reset,Apple logo appears on screen,but phone wont start!!

    That hapened to me and this fixed it. I dont know what it does or how it works so dont hold me accountable but it worked for me
    Entering DFU Mode (Official Instructions)
    Plug your device into your computer.
    Turn off the device.
    Hold the Power button for 3 seconds
    Hold the Home button without releasing the Power button for 10 seconds
    Release the Power Button but keep holding the Home button
    Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
    Make sure the device screen is blank and no logos are present
    Exiting DFU Mode
    Hold Home and Power Button till the Apple Logo appears
    ~Jordan

  • Nokia car charger exploded Now phone wont charge.

    Nokia car charger exploded Now phone wont charge. I have plugged it into the mains now it won't charge. Any ideas?
    Its not who i am underneath. But what i do that defines me.
    You are here for a reason Superman.
    "Come to me son of Jor-EL. KNEEL BEFORE ZOD"

    It was this one http://shop.nokia.co.uk/bin/venda?ex=co_disp-view&invt=0274917&bsref=nokia
    I made a big bang, then smoke poured out of it a smelt awful. Now the phone won't charge or turn on. Nokia are gonna have a big bill after this.
    Its not who i am underneath. But what i do that defines me.
    You are here for a reason Superman.
    "Come to me son of Jor-EL. KNEEL BEFORE ZOD"

  • Screen Cracked and replaced, now phone wont stay on, and now i cant get it to turn back on

    about 3 days ago i dropped my phone and the screen cracked.  Although it was cracked it still worked fine with no issues and the new ios6 was installed prior to it breaking.  I brought it to a iphone repair store where they fixed the screen.  After a day i noticed the phone just turned itself off so i put it on the charger and returned and it was working.  ever since then it has now shut off randomly for no reason, battery was either fully charged or more than 50%.  I hooked it up to my computer to restore it today and it seemed to work for about 3 or 4 hours until it started to turn off on its own.  i would restart it and it would work for a shorter and shorter period of time until now it wont stay on at all.  i plugged it into the charger and it goes through the apple powerup screen and when it turns on it says searching for network in the top left corner.  when i press apps and such it is very laggy and it eventually freezes and the screen fades to black and the cell phone turns off.  I cannot get it to stay on now, even when it stays plugged into the charger...HELP PLEASE!!! is this an apple issue or something the repair shop may be responisble for?????

    The reapair shop is probably responsible. And now that you took it to a third party and not to apple store, Apple will not touch your phone at all. So you will probaly have to buy a new one or go back to the reapir shop and hope they can fix it.

  • Update failure and now phone wont turn on

    please please help. as stated above the update failed and now the phone wont turn on.
    i had charged the phone up so that wasnt the problem, it just said that the updater lost connection with my phone
    can anyone help?
    cheers

    You did not specify what phone model you have.
    Have a look at the link below to a post in the POK section regarding this issue.
    /discussions/board/message?board.id=topfaq&thread.id=112

  • Casio Update Failed, Now phone wont load

    I recently tried to use the VZW software update assistant to try and update my casio commando 4g lte phone, after it said it was updating for about 20 minutes it told me that the update failed and now the phone wont get past the GzOne Now Loading screen. Please help. This is a work phone and is desperately needed ASAP!

    I purchased a Casio G’zOne Commando 4G LTE on 1-11-14.  Android version 4.1.2, firmware version C811M040. When I check for software updates it says its current, although in the Info it shows "Update status: Failed Update"; "Last Activity at 20:27:07 12Jan04 MST"; "Reason code: 402"
    What does this mean?
    I am trying to solve the problem that the Phone's directory will not upload into my Nissan Pathfinder's Phone Directory.  This phone is a Nissan supported and approved phone. After calling Nissan and going into Nissan service they said the problem, experienced by others as well, is a change that occurred in the last software update that is causing one of two problems:
         1) Phones directory will not load at all...or
         2) The directory loads, but when the car is turned off and restarted the directory is gone and needs to reload again.
    Can you provide any insights to these two issue? Is there a more recent Android or Firmware update for this phone?

  • Changed number online now phone wont work what do i do?

    my husband went on line and changed to a local number - now the phone wont work... i dont know whats wrong but hes stuck in flordia working third shift and im in sc and the account holder. everytim i call it it goes straight to voicemail and he has messaged me via the computer that it wont allow him to dial out.HELP PLEASE

    Did you try shutting the phone off and then re-powering it with any results.. ?  Give that a try see what it does it may help push the Number through or  Try this Dial * 228 send then 1 to reactivate it  try that see if that works.. Let me know if it did or not I'm on the forum for a while this morning.. b33

  • Did ios update now phone wont work

    Help!  I just tried to do an update on my iphone 3 (which was prompted when connecting to itunes) but now my phone wont work at all.  It wont configure

    Any specific error messages?
    Try switching off your seurity software and restore the device http://support.apple.com/kb/ht1808
    NB: using that article will erase everything so make sure you have a backup
    try restoring on another computer if this fails, and if that doesn't work either, the device needs hardware repair.

  • Downloaded app Now phone wont work

    I downloaded I heart radio
    When I tried to run it it would not work...Tough luck...Now I find my browser wont work my phone wont work
     When I try to use my browser I get a message
     THe radio on the device is currently off or the battery is to low for the radio to be used. As a result the browser cannot retrieve any web pages
    The phone is fully  charged I deleted I heart. I tried turning the phone off, I pulled the battery fo 30 sec. Nothing helped any ideas???

    Hi and welcome to the forums jmax1863!
    A couple of places for you to visit: Blackberry 101     Tips & Tricks
    The "radio" on the BB actually refers to the network connections.  Go to Manage Connections and Turn all connections on.  Let us know how it goes.
    Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • I ended a host proces and now firefox wont start up Help?

    Well Before this everything was fine but now, after i ended a host process (dont know wich one) i open up firefox and it just stays still or frozen and so it wont start up,
    I tries restarting the laptop a couple times but nothing.
    Id like to also know maybe how to restart that host process i ended thanks.

    Try to ask advice on a Windows oriented forum.
    * http://www.bleepingcomputer.com/forums/ - BleepingComputer.com - Computer Help Forums
    * http://windowssecrets.com/forums/ Windows Secrets Lounge

  • My iphone 4 is not recognized by itunes when i connect to it, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

    my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

    Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.

Maybe you are looking for

  • SSIS Web Service Complex Type Inputs

    Hi, I am trying to make a call to a third-party web service in my SSIS package.  The request has custom complex data type as the parameter.  As has been pointed out in this forum before, the Web Service Task only lets you assign the outside parameter

  • Any Advice for 4:3 and 16:9 Menu DVD Authoring / Scripting?

    Hi all, Working on my first DVD with both 4:3 and 16:9 menus. I was wondering if anyone has advice, pointers, things to watch out for, tips, etc... I want it to be completely automated so I am using scripts to check SPRMS, jump to menus depending, et

  • Disable namespace prefixes in Transformer

    hi I am stuck in a cyclic problem. JAXP XSLT and SchemaValidator do not work together. (Java 1.5 and 1.6) I have a XSD with a namespace. When I generate the XML using an XSLT I specify namespace using the namespace attribute of xsl:element The JAXP t

  • Editting data in a database via a table in the UI

    Hi, I have an application where I am using a Table component to display data from a database. Now the problem is that the database might be updated from time to time. In that case, how do I ensure that my table displays the updated data? Because curr

  • Best way to migrate to a  new SSD drive for performance and reliabilility

    Hello all, My 2011 15" MacBook Pro is about 3 weeks old and my new OCZ Vertex 3 120GB SSD is coming in tomorrow. What is the best way to move my system over to the new drive? I have Time Machine backups on my external Firewire drive as well as comple