E75 MFE cant work with Exchange 2010

Dear all,
My company has upgraded to Exchange 2010 and my e75 MFE can't work after the upgrade....
The log from my E75 shows " system error, try later"
Shall I need to upgrade the MFE? since I can't donwload the latest MFE from OVI store, can somebody send it to me?
Thanks for your help!
Cheers,
Joe

if you want to import something on your Z10, it is not the certificate you want to import, but rather the certificate that authenticates your certificate.
That being said, why don't you buy a cheap certificate issued by a CA recognised by the Z10?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

Does Edge transport server for Exchange 2013 work with Exchange 2010?

Hello everyone,
I want to install Edge transport server for my Exchange servers,
Could you tell me if Edge transport server 2013 works with Exchange 2010?
Thank you in advance

Hello
tip:
https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
2 If you want to create an EdgeSync
Subscription between an Exchange 2010 Hub Transport server and an
Exchange 2013 SP1 Edge Transport server, you need to install Exchange
2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport
server.
sorry my english

Does SL Mail/iCal/Address Book work with Exchange 2010?

Is anyone using Exchange 2010 with Mail/iCal/Address Book (via the Snow Leopard web services interface and not the IMAP interface)?
My company is about to upgrade Exchange from 2003 to either 2007 or 2010 and since the boss and I both use Macs we want to make sure that SL's apps will work no matter what choice of Exchange server is made.

SL has not been tested with Exchange 2010 as far as I am aware. 10.6.2 was only tested against the 2007 variant.

Setting Out Of Office from Outlook not working with exchange 2010

Hi
We have an exchange 2010 server with 2 load balanced CAS server and Mailbox servers in a DAG. We have a few domain
names accepted (will call it firstdomain.com and seconddomain.com) but only one is in certificate (firstdomain.com).
The issue is - when user with default email @seconddomain.com try to set “Out Of Office” from outlook (2010 with all service
packs and updates) he is getting “ Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later” where
setting it from webmail works fine and setting it from outlook for users with @firstdomain.com reply address works fine.
we have both internal and external urls for all virtual directories set to external
host address (https://mail.firstdomain.com
  etc). All the users are on intranet with local ip subnets (sites connected via vpns ), all the routing is in place and DNS points to correct ip addresses.
Autodiscover works fine (tested in outlook ) and giving correct address for OOF link
( https://mail.firstdomain.com/ews/exchange.asmx)
wich opens fine if entered into address bar in IE so its NOT AN AUTODISCOVER issue .
I enabled logging in outlook and thats what I am getting in there:
We have an exchange 2010 server with 2 load balanced CAS server and Mailbox servers in a DAG. We have a few domain
name accepted (will call it firstdomain.com and seconddomain.com) but only one is in certificate (firstdomain.com).
The issue is - when user with default email @seconddomain.com try to set “Out Of Office” from outlook (2010 with all service
packs and updates) he is getting “ Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later” where
setting it from webmail works fine and setting it from outlook for users with @firstdomain.com reply address works fine.
we have both internal and external urls for all virtual directories set to external
host address (https://mail.firstdomain.com
  etc). All the users are on intranet with local ip subnets (sites connected via vpns ), all the routing is in place and DNS points to correct ip addresses.
Autodiscover works fine (tested in outlook ) and giving correct address for OOF link
( https://mail.firstdomain.com/ews/exchange.asmx)
wich opens fine if entered into address bar in IE so its NOT AN AUTODISCOVER issue .
I enabled logging in outlook and thats what I am getting in there:
1600       0x49763D20        02/02/15 16:50:44
+++++++++++++++++++++++++++++++
1600       0x49763D20        02/02/15 16:50:44
OWINHTTP SEND HTTP REQUEST BEGIN
1600       0x49763D20        02/02/15 16:50:44
Profile=Outlook
1600       0x49763D20        02/02/15 16:50:44
  [email protected]
1600       0x49763D20        02/02/15 16:50:44
URL=https://mail.firstdomain.com/ews/exchange.asmx
1600       0x49763D5F        02/02/15 16:50:45
GetLastError=0; httpStatus=401.
1600       0x49763D5F        02/02/15 16:50:45
OWinHtpp disabled auth schemes:
1600       0x49763D5F        02/02/15 16:50:45
<NONE>
1600       0x49763D5F        02/02/15 16:50:45
OWinHtpp supported auth schemes:
1600       0x49763D5F        02/02/15 16:50:45
Negotiate
1600       0x49763D5F        02/02/15 16:50:45
NTLM
1600       0x49763D5F        02/02/15 16:50:45
Basic
1600       0x49763D5F        02/02/15 16:50:45
OWinHttp attempting Auto-Negotiate with Desktop Credentials.
1600       0x49763D5F        02/02/15 16:50:45
OWinHttp USING pcreds->dwAuthScheme:
1600       0x49763D5F        02/02/15 16:50:45
Negotiate
1600       0x49763D9D       02/02/15 16:50:45
GetLastError=0; httpStatus=500.
1600       0x49763DAD       02/02/15 16:50:45
OWINHTTP SEND HTTP REQUEST END
1600       0x49763DAD       02/02/15 16:50:45
Last thing - we are using proxy server and with proxy off it works fine although all
possible exchange server hosts/domains/ip addresses excluded from proxy.
Aside from obvious question - what can be wrong and what to test next, another question
is - how can I check/monitor setting OOF on server side (log files etc)?
Last thing - we are using proxy server and with proxy off it works fine although all
possible exchange server hosts/domains/ip addresses excluded from proxy.
Aside from obvious question - what can be wrong and what to test next, another question
is - how can I check/monitor setting OOF on server side (log files etc)?
Thanks

Hi,
According to your description, I understand that Outlook client with second domain name cannot use OOF setting and get an error “Your Out of Office settings cannot be displayed, because the server is currently unavailable.” However OWA works fine.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account or some special user experience this question.
Would you please try to reconfigure Outlook profile in other Computer, Outlook version and return the results?
If this issue only appeared on Outlook 2010, please refer to below link to troubleshooting:
https://support.microsoft.com/kb/2596516?wa=wsignin1.0
Please try to run ExBPA to test OOF to get more details about this question. Additional, I find a similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/exchange/en-US/81ebc1de-c899-4097-b224-a0e4b33e4162/users-cant-open-out-of-office-assistant
Best Regards,
Allen Wang

SME 7.1 not working with Exchange 2010 SP3 UR8v2 and OnTap 8.2.3 7mode

Followed IMT and installed software that NetApp said would work.Ontap 8.2.3 7-modevmWare 5.0 SP3Microsoft Windows Server 2008 R2 SP1Exchange 2010 SP3 UR8v2NetApp Host Tools 6.0.2SnapDrive 7.1.1SME 7.1 Everything connects fine. SnapDrive sees my drives. SME connects to Exchange Server. However in the process of configuring SME, I get the following error. I have followed knowledge base article and increased the timeout of DFM connection in registry, but that has not solved the problem. Has anyone run into this before? SME 6.1 works fine, but is not compatible with SnapDrive 7.1.1 (causes verifications to fail because server can't mount clone) and lower SnapDrive versions are not compatible with Ontap 8.2.3. I am in a real bind here. Thanks in advance.

the following configuration for SME 7.1 is no longer supported: Windows Server 2008 R2Exchange 2010 SP3 RU1 – RU5WMF/PowerShell 3.0SME 7.1 The supported configuration will now be: Windows Server 2008 R2Exchange 2010 SP3 RU5WMF/PowerShell 4.0SME 7.1 this is because Microsoft does not support WMF 3.0 on Server 2008 R2 running Exchange 2010 SP3, with any RU version.SME 7.1 requires a minimum of PowerShell 3.0 (part of WMF 3.0) in order to run. Feel free to review the Exchange Server Supportability Matrix located here: https://technet.microsoft.com/en-us/library/ff728623%28v=exchg.150%29.aspx. All existing documentation (ISG, Admin Guide, IMT) will be updated shortly to reflect this change in requirements. hope that helps,Domenico.

Active sync on bionic will not work with exchange 2010

We recently upgraded our corporate email system to exchange 2010. Prior to this, while on exchange 2007 I had no issues with active sync. On the day we upgraded active sync no longer worked for me I have others at work running older Droid OS. 2.2.2 and 2.2.3. They have no issues with the new exchange. I am on 2.3.4. I am able to do the setup and the setup will detect the new server and act as if the account is setup correctly. When it tries to sync I get a "connection error" message.

Hi,
From your description, I recommend you use the following URL to check if you can access EAC. I see it works for several people about this issue.
https://<Exchange 2013 CAS FQDN>/ecp?ExchClientVer=15
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Can Exchange Online Protection work with Exchange 2010 on-premise

I want to keep my current Exchange 2010 server but switch to Exchange Online Protection for anti-spam.
Is that possible?
Without doing any AD/Azure sync?

Yes to both. With directory synchronization you can have the added benefit of blocking mail to nonexistent recipients.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Mail for Exchange incompatible with Exchange 2010

MfE is incompatible with Exchange 2010.
There seems to be a difference in the EAS protocol used.
This causes synchonisation to fail when syncing the calendar.
If anyone has a workaround please let me know and Nokia please fix this issue?
Solved!
Go to Solution.

Hi there,
just installed Mail4Exchange (3.00.050) from the ovi store on my Nokia e71.
Unfortunately it doesn't seem to sync anymore with my google apps account. Anybody else encountering this problem? I get a message every other second that there seems to be a sync problem and that i should contact my admin if this stays on.
It worked perfectly with the older version though.
Thanks for any advice.
Regards,
JohnnyT76

Limitations of SharePoint 2013 integration with Exchange 2010?

Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature. There is a Legacy Task Synchronization mode
available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization. It lets users manually sync specific task lists with Outlook. But there is no task aggregation. I found this
whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
http://www.microsoft.com/en-us/download/details.aspx?id=38799
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

RightFax 9.4 Intergration with Exchange 2010

We know Exchange 2010 is supported with Fax Server 9.4 FP1 and we need to install the FP1 patch. We need to move the RightFax 9.4 integraton from Exchange 2003 to Exchange 2010. Is there any white papers or support documents on how to do this?
We need both inbound and outbound (faxing from Outlook) to work with Exchange 2010. What steps need to be done to complete this task? Thanks!

I think it may make sense to contact the RightFax people (OpenText) regarding this, since RightFax is their product.

How do I get macmail to work with exchange server 2010?

my company upgraded to exchange server 2010 and since then, I can't access ical shared calendars. I've been forced to switch to Outlook for my email client at work. Now I can't receive email at home using macmail. Is there a way for macmail to work with exchange server 2010?
Intel tower running snow leopard 10.6.8 with the latest version of macmail.
Any insight into this problem is greatly appreciated.
Thanks very much.

Hi,
Please refer to the following link http://forums.adobe.com/docs/DOC-3581
For changing the HTTP, you need to do it outside the muse after exporting the site or after uploading it to godaddy.
Regards,
Aish

SME 7.1 not working with Exchange 2013 SP1 CU6

Hello, i tried upgrading to SME 7.1 on our Exchange 2013 SP1 CU6, but when trying to configure the Exchange Server in the SME management console using the configuration wizard, it gave an error before the LUN mapping page, saying "Failed to get Exchange information for server" and "The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.". I upgraded Snapdrive to 7.1, verfied all credentials according to the manuals, re-installed and rebooted multiple times (registry and filesystem cleaned, even tried to rename the existing SnapInfo directory, ...), stopped all other services on the server but without any change... Every time when trying to run the configuration wizard, the debug log shows no errors, lists all Exchange information and ends with the following lines:[11/18 12:51:58 155] Exit CSmeCDOExm::GetExchangeStructureInternal 0x0
[11/18 12:51:58 155] Exit CNtapSnapMgr::GetExchangeStructure: 0x0
[11/18 12:51:58 233] Enter CSmeServerBase::~CSmeServerBase ...
[11/18 12:51:58 248] m_ptrSnapShot released
[11/18 12:51:58 248] m_pISnapShot4 released
[11/18 12:51:58 248] m_pISnapShot5 released
[11/18 12:51:58 248] m_pISnapShot6 released
[11/18 12:51:58 248] m_pISnapShot7 released
[11/18 12:51:58 248] m_pISnapShot8 released
[11/18 12:51:58 248] m_pISnapShot9 released I ended up uninstalling SME 7.1 and re-installed SME 7.0 which is working. Exchange Server: ESXi 5.5 VM, Windows Server 2012 R2 (with current patches), Exchange 2013 SP1 CU6 - no DAG, single server installation (in co-existence with Exchange 2010), 4 iSCSI LUNs created with Snapdrive (1x Log, 3x Store), System drive and Exchange installation drive on vmdk Disks (via ESXi -> NFS store on the same NetApp)NetApp: FAS 2240-2 with Data ONTAP 8.1.4P1 7-mode (with complete license bundle) Anyone else got this problem or even better - a solution?

We could not reproduce the error with the upgrade workflow.Looking at the error and the relevant function, we could force the problem in following conditions: -SME is configured or ran at the DAG level-one of the following services is stopped or not responding on one nodes of the DAG Snapdrive Service, Snapmanager Service, Snapdrive Storage Management Service,Snapdrive Management Service. Would be good if we could get the output of following powershell cmdlet before and after the upgrade: Get-Service –ComputerName Node1, Node2, Node3 –name Snap*, SDMGMT*, SWSvc Best regards,Dan

OWA stopped working on Exchange 2010

OWA stopped working on Exchange 2010
Outlook connected to Exchange sync and Activesync work fine.
Series of events – Exchange service stops without reason, then Receive connector disappears, after that Send connector disappears; now QWA does not work. Between each event – a day or two interval.
In OWA folder there are 3 subfolders with different versions - 14.1.421.2 (currently active), 14.1.438.0 etc. There is no access online to OWA now. Earlier there was a message of missing theme – I’ve copied theme from later version folder, now there is no connection
and no message.
What is the best way to fix OWA, or to delete existing and install new OWA with default settings without uninstall Exchange server.
I can't access using IP address.
Everything was working previously, and then just problems started one after another. Windows update in the middle - I was trying to uninstall, but problem started before first windows update. Another probable cause - Backup Exec 2012 agent - I've cancelled
it for now.
There were two roll-ups in ththese windows updates. I was able to uninstall one of them (8), but roll-up 7 is unable to uninstall.
It is just a blank page now.
When I try using IP address, the error is
"Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; WOW64; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.30729; .NET CLR 3.5.30729)
Timestamp: Tue, 17 Dec 2013 05:02:13 UTC
Message: Syntax error
Line: 1
Char: 1
Code: 0
URI: https://10.0.0.191/owa/auth/logon.aspx?url=https://10.0.0.191/owa/14.1.421.2/scripts/premium/flogon.js&reason=0"
No errors for OWA in Management Console, can't find any explaining events in Event Viewer.
The main question is - how can I get rid of multiple versions in c:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\ and create something workable

Hi,
Have you tried access OWA on CAS server via https://localhost/owa?
If not, please check IIS log and see the related error message.
Regards,
Rebecca Tu
TechNet Community Support

Can not get Exmon to work on exchange 2010 update roll up 4

Hi,
hope some could give me a pointer or 2 .
Just can't get it working . double click the registry key and verify the keys are in the registry.
Exmon is installed on a cas server with its own role.
I downloaded exmon from here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=11461
I followed the Using_EXmon doc file and got this error.
Exchange is not running on this machine!
To view an ETL file, pass the filenam as a command line arguement.
I ran it as administrator and still does not work.
running Exchange 2010 cas server roll up update 4.
JOe

Hi
You can read this article. It is my recent case.
http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/431756a8-67a5-42fc-a010-224db3c970fd
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Cisco Unity Connection Single inbox with Exchange 2010

I have a new installation of Unity Connection 8.6.2 using single inbox with an Exchange 2010 cluster frontended by a Netscaler load balancer.Functionality that does not work is when a new message comes into outlook and the message is read or deleted it does not update the status on the phone- IE turn off the MWI or if the message is deleted it is still a new message in Unity. If you click reset in the user unified message account, the status gets updated.
TAC says its a blocked port on Exchange TCP 7080 but that is open.

I followed this document :
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html
but when i try to integrate CUC with exchange 2010 , i didn't find is clear enough
do you have Step by Step more clear than that link becouse my lab very close to your case.
Regards

E75 MFE cant work with Exchange 2010

Similar Messages

Maybe you are looking for