E75 Not all WLAN available on Landscape vs Portrai...

Hi all, Your feedback is highly appreciated to the following problem: E75 brand new with latest firmware  Using WLAN search, when Kbrd is closed (portrait pos.), phone founds an x number of  active Wlans and connects very fast to the specified one. When  the connection  is established there is no problem, but at the time you decide to slide the keyboard and move to landscape, after while, the connection is dropted  and the Wlan search operation starts again. During this search, not all the previously found Wlans are available
Close (power off) and On the phone again, with the kbrd open (landscape) still in this position wlan founds much less available Wlans comparing to the portrait position (when the kbrd is closed)
Thanking you in advance for your advices

Hi tha_gt
my openion in your issue is that there is no problem in the landscape mode or the keybord slide but the problem is that when you hold the phone transversly , your hand stays covering the antenna of nokia and wlan , so the connection get worse till lastly drops,  you can observe the same for the 3G connection.
so i advise you to try many places on your phone to know the best way you not affecting the wlan activity and signal reception
i hope that works and let me know
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

Similar Messages

  • Reader X MUI - Not all languages available to select

    I am trying to package and make Reader 10.1 MUI available for my company. Whenever I install the MUI on an XP SP3 system, only some of the languages are available at startup.
    The ones that are available are: catala, Czech, dansk, Deutsch, English, espanol, euskara, francais, italiano, Nederlands, norsk, Portugues, suomi, svenska.
    All the rest are greyed out an not selectable. I've installed all the language packs for the OS, and enabled all the language and region features and it doesn't make a difference. I've tried making a custom install to confirm that all languages are being installed, but still I am limited to which languages are available.
    Has anyone had this issue or have any idea what it could be? This issue is not present on a Windows 7 machine.

    This sound interesting. The upgrade has obviously failed to apply the options. I'd be interested in seeing how this is resolved. Please update the thread once resolved.
    Cheers
    Paul | sccmentor.wordpress.com

  • P55-GD85 - not all ram available at boot / need to reboot. [Solved]

    I've 4 sticks Corsair XMS3 - 2 GB @ 1600 Mhz installed on my P55-GD85 board with the XMP mode enabled.
    When I boot the PC, only 2 sticks are recognized (4087MB) at the end of the process (even if the boot sequence is notifying 8173MB ram) and I need to restart the PC to obtain the 8173MB really available. Seems that during 1rst boot, not enough power is provided to awake the 4 sticks (and I've a good Seasonic 80+ 750W PSU...) and when restarting the PC a few seconds later, all memory is always available.
    I tried reseating them, it not changed anything....
    I've run the Windows 7 memory verificator, no problem...
    I 've run MEMTEST when the all ram was available, no problem...
    What do you advise? Increasing the memory voltage slightly? Disblabling "quick boot" option? Something else?
    Thanks in advance for your help and advises.

    Tried reseating all my memory sticks, one after the other, in the right DIMMs (beginning with the nr 1) and rebooting each time in between...RAM was increansingly recognised...but once the PC was stopped...same thing when booting it after a while...only 4087MB available and need to reboot to have the 8183MB available.
    Tried to reconnect the power pins to the MB...same, not better.
    Tried to plug the PC directly to the sector without passing through the BackUPS device...not better.
    Seems related to temperature of system/components...when booting in the morning, I need several reboots to have the memory fully available. If the system has been working a lil, one reboot is enough. When the system has been working for long, memory is fully available at each boot 
    Will now try to reseat the sticks in another order...another idea Doctor ?

  • Not all drives available for export?

    Hi,
    I'm new to Lightroom (3.2 on Windows 7 64 Bit) so please bear with me if it should be a known problem - couldn't find an answer in the forum or help so far:
    When I want to export images, more often than not I only see my user folder in the window that pops up when I select the "Choose..." button in the export dialog, but I don't want to put anything there - I never use these default folders for anything.
    Also, my catalog is on E:, not in the user folder on C: so LR is actually accessing other drives...
    All other drives and folders are simply missing in the folder selection window (I have never seen this window being reduced to the user folder that way before).
    The weird thing is, I was able to use all my other drives and folders before. I even created presets for this, but when I try to export with one of those presets, instead of exporting to that other drive, I again get that reduced folder selection window with only my user folder.
    ATM this makes Lightroom hardly usable so I would be very thankful for any hint on what this could be related to.
    This happens randomly BTW - sometimes it works, most times it doesn't.
    Thanks for any pointers!
    Cheers,
    Thomas Helzle

    To follow up on this:
    I tried to run Lightroom as an Administrator - no luck, the problem stayed the same.
    I restarted my machine - no luck either.
    I had to export my images to my user folder and afterwards move them to where I need them.
    Very annoying.
    But just minutes ago I actually was able to solve it in a very curious manner:
    In the select Folder Dialog you get when you hit the Choose... Button in the export sceeen, I copied the full path to the drive and folder into the line where normally you only see the selected folders name - and guess what: All my drives are suddenly back visible, I can work normally now.
    I have no clue what kind of weird bug this is, but it is definitely NOT a normal behaviour of a windows file dialog.
    Cheers,
    Thomas Helzle

  • Reminders - Not all calendars available

    When I try to create a new reminder on either my Mac or iPhone, only of a couple of my Calendars appear in the "list" selection. Why aren't my other Calendars appearing? I'd like to categorize the Reminder.

    Hello WDKii,
    Thank you for providing the details of the calendar issue you are experiencing with your Mac.  I recommend following the steps in the section titled "Troubleshooting on OS X" to resolve the issue you described:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When converting over to HTTPS and PKI for clients, not all actions are available in configuration manager cpl

    I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.  
    So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so.   I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines.  My already
    deployed servers seem to have picked up the PKI setting no problem.  In the past when I would deploy a new windows client everything would be fine.  When i converted over to PKI in my test environment I am now having issues when I go to deploy a
    new windows client. I don't get all of the Actions listed in the Configuration Manager control panel.  All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
    Cycles, before all of them would populate no problem.  I have let this machine sit here for several hours and nothing has changed yet.  It does say PKI for client certificate.  Sometimes when I would deploy new machines it would say NONE for
    Client certificate.  In my production environment it says self-signed.  I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
    Ok so maybe not all the time that when i reinstall the client it fixes it.  I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
    Does anyone have any ideas?

    Hi,
    I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
    You can export and import the certificate by using MDT integration, try this blog for PKI part:
    How To: Build and Capture in Configuration Manager 2012 using HTTPS
    And in addition, you can upload the log to your onedrive so you can share with us.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Loop at screen - not all fields are available

    Hi all,
    I want to set some fields on the screen invisible.
    When I do the loop at screen in PBO not all fields from the screen are available.
    Just four fields are available. In the screen there are about 20 fields.
    I try to use the chain. field xyz. endchain... But it was not the problem.
    Any ideas?
    regards

    Try this ,May be  Help ful
    { SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(10)  FOR FIELD r_cars.
    PARAMETERS : r_cars RADIOBUTTON GROUP rgb USER-COMMAND usd .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_toyota .
    PARAMETERS : r_toyota RADIOBUTTON GROUP rgb1 DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_ford .
    PARAMETERS : r_ford RADIOBUTTON GROUP rgb1 .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(10)  FOR FIELD r_bus .
    PARAMETERS : r_bus RADIOBUTTON GROUP rgb DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_volvo .
    PARAMETERS : r_volvo RADIOBUTTON GROUP rgb2 .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_merced .
    PARAMETERS : r_merced RADIOBUTTON GROUP rgb2  DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    AT SELECTION-SCREEN OUTPUT.  " AT SELECTION-SCREEN OUTPUT
      IF r_cars = 'X'.                                 " If R_CURS radiobutton is selected
        LOOP AT SCREEN .                       " Looping at screen
          IF screen-name CS 'R_VOLVO' OR
             screen-name CS 'R_MERCED'.
            screen-active = 0.                     " Hiding the R_VOLVO and R_MERCED
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN .
          IF screen-name CS 'R_TOYOTA' OR
             screen-name CS 'R_FORD'.
            screen-active = 0.
          ENDIF.
          MODIFY SCREEN.
        ENDLOOP.
      ENDIF. }

  • Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download).  Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the p

    Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download).  Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the possibility on monetizing since amazon gives commission for linking.  
    This question is for both the uncredited (private) courses and the bigger accredited accounts.    I am a  developer trying to learn how to help my area schools and also have some ideas for my own courses.    Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
    If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified.   I would hate to develop something just to later find out it is against the apple iTunes U agreement.

    Fair question
    And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
    I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
    Thanks.

  • Field Explorer help, not all Database Fields available

    Greetings all, I'm new to Crystal Reports (version XI by the way) and Tigerpaw.  I've had some great luck editing existing reports to the specifications we've needed thus far.  But now I've run into a real problem, it seems small, but it's important to me. 
    The one change I'm unable to accomplish on our new invoice report:
    -Adding the Tigerpaw field, Account Name, to an invoice.  The "Account Name" field is a field pulled from the tblAccounts Database Fields category in the Field Explorer.  But when I'm in my invoice template, I do not have that category available, I only have tblSysListViewPrint and tvwr_Invoices categories, the latter does have the field for "Account ID" which is close for our purposes, but not the same.  So how might I go in and pull from the tblAccounts category...specifically to get the  tblAccounts.AccountName field.  Copying that field from another existing report does not work either, "one or more formulas fail to compile".
    I'm not sure how it decides what Database Fields to pull from, because on other reports, the tblAccounts category is available, but not the tvwr_Invoices category, so I am quite confusedl.
    Hopefully this makes sense to someone out there. 
    Thanks.

    Thanks, V361,
    When I go to create a blank report, I get no databases available.  My first prompt is the "Database Expert".  The "available data sources" list is Current Connections (no items), Favorites (no items), History (no items), and Create New Connection.  The "selected tables" list on the right is blank.  I honestly don't have a clue how connect to whatever server contains those items.  I realized since I first posted that I need to figure that out to make any progress.  All the created reports already have the database field categories set up already, but it looks like all the available fields were not initially chosen for the reports.
    So what I believe it comes down to is the fact that I need to figure out how to "Create New Connection" to find my available database fields.

  • How can I delete or transfer some (not all) Albums, Music and pics in "Photo Library" NOT purchased in iStore from my iPhone to a computer, when the original computer that did the original iTunes to iPhone synch is no longer available (stolen)?

    The iPhone iOS 4 User Guide sees to indicate that the SYNCH function is all one way from computer to iPhone, unless it is for purchased items in iStore on the iPhone.
    1. How can I delete some (not all) Albums and Music from my iPhone when the original computer that did the iTunes to iPhone synch is no longer available (stolen)?
    2. How can I transfer Albums and Music (not purchased from iStore on iPhone) from my iPhone to the new computer?
    3. How can I delete some (not all) pictures in my iPhone "Photo Library"  when the original computer that did the iTunes to iPhone synch is no longer available (stolen)?
    4. How can I transfer pictures in my iPhone "Photo Library" to the new computer?

    Hi wjosten,
    thanks for the "TouchCopy" software link. I have downloaded a demo copy and it will resolve my transfer of music from iPhone to the new computer. I can then delete any unwanted music on the new computer, then re-synch the updated music to iPhone.
    I am not sure about the photos.   On my iPhone, there are two photo "albums" - one called "camera roll" and the other called "photo library."  TouchCopy finds the pictures in the "camera roll" DCIM folder, and I can copy them to the new computer etc. 
    However, TouchCopy does not seem to find the "Photo Library" folder.  Any clues?

  • Not all installed fonts are available in Illustrator CS4

    Hi,
    I've noticed that not all of my fonts are available in Illustrator CS4. My list appears as usual in the drop down menu, but many of my fonts have somehow become incomplete. For instance, only 3 weights of Helvetica are available, instead of the 20 or so I have installed on my Macbook Pro. I use Linotype Fontexplorer, and all of my fonts appear without problems in the browser window, but not in Illustrator.
    I've deleted the Adobefontlist file with no result, and I've also tried uninstalling the fonts and reinstalling them with no result. I've had a few searches to see if anyone else has had the same problem, and some people have similar issues but not exactly the same. I've also tried some of the adobe troubleshooting steps with no result.
    Any help with this would be gratefully received. Somebody must have experienced the same problem?
    Many thanks
    Jono

    Thanks Jesseham, a good suggestion. All fonts within the families are ticked like you say, and I've just performed a clear out of the caches but still no success I'm afraid.
    I've attached a picture of my font list in Illustrator in the hope that someone might see something that I'm not. As you can see from the list, Helvetica Neue LT Std is in the list as Helvetica Neue LT Std 85 Heavy and only has the option of 'Regular' under the font style drop down menu. It should be just Helvetica Neue LT Std in the font list drop down menu and have all of the available weights in the font style drop down menu.
    Any thoughts?
    Thanks
    Jono

  • Not all Typekit Fonts available in Muse?

    Hello,
    it seems that not all the fonts that are available in Typekit can be used in muse... has anyone a suggestion?

    Hi grafiklieschen,
    Abhishek is correct: you can only use and preview the free and open-source Typekit fonts in Muse. The full Typekit library isn't included in the font menu.
    You can still use Typekit on your website, though; the fonts just won't show up in the Muse preview. The Muse Insider wrote a post on how to insert the Typekit embed code from the Muse interface:
    http://museinsider.com/how-to-add-typekit-fonts-to-your-muse-site.html
    Or you can add the embed code to the Page Properties dialog within Muse, which will include it in the <head> of the page when you export your website.
    We hope to have a more complete integration of Typekit with Muse in the future, but I can't say yet when that will be available.
    I hope that this helps!  Best,
    -- liz

  • Not all ATV videos are available on Enterprise Cafe

    I see that not all the Adobe TV videos are available on enterprise cafe. For ex: the new Flex mobile (burrito) videos  are not to be found on the cafe.
    The way I look at it, Cafe should be one stop shop for all stuff Adobe. Having to leave this means its broken to some extent :-)
    Would be nice if all the videos are included in the cafe. Also would be great if there is another view/sidebar for the videos showing the most recent video content - sort of showing the recent videos added so that we know what is new/latest.

    Hi Shad0wfax,
    We read an RSS feed from AdobeTV. As soon as they update their feed, it'll show up in Café.
    Thanks for your feedback... keep it coming!
    Cheers – Marc.

  • Any way to play Spotify on shuffle -- ALL the available songs not just a playlist?

    Is there any way to just play Spotify songs on shuffle, have it pick randomly among all available songs?  I would think this would be available but do not see how to do it.
    Thanks
    Bob
     

    WadeCottingham wrote:
    Well, let's be clear, this was a PAST FEATURE that was simply removed.  Early on you could easily shuffle tracks among all playlists. Later that was removed. I posted on here somewhere and some smart person on this forum told me I could just shuffle from 'Library'.  OK, that was fine, that worked, I was happy. Now, with the Black Update, 'Library' is gone, along with the ability to shuffle-play songs randomly automatically darting in and out among all my playlists. That is a feature I dearly liked too, dang it. I agree, it's LAME to not be able to shuffle play ALL SONGS in ALL PLAYLISTS. 
    It would be great to shuffle all music available on Spotify but for now I would be very happy to just have the old 'library' function back.For now I just made a folder which I named 'Library' and put all my playlists in it. Since I also have a lot of songs that are not in a playlist I always save every song/album to a playlist named 'All music' and put that playlist in the 'Library' folder as well. I just like to play my music on shuffle and be surprised by some song I haven't heard in ages, don't know why it's not possible to just implement this in Spotify.I know it's not a pretty workaround but since there is no other option I got used to it. Too bad the folder won't show a the songs in it as a list...no logic behind that because it makes things more difficult like search and clicking on album art for instance.

  • Is it dangerous to upgrade not all packages that are available...

    Is it dangerous to upgrade not all the packages that are available for upgrade?
    May it crash something which is not easy/possible to fix without reinstalling the whole system?

    Mr. Alex wrote:What if I haven't upgrade Arch for 2 years and after this time I upgrade only kernel. Can it cause any system damage/instability?
    If you are asking such questions Arch is most likely not the answer. And yes, user space programs might be too old for the new kernel or pacman might just not work in the first place due to other changes on our side.

Maybe you are looking for