E75 version 201.12.01 Outlook Webaccess requires N...

hello, I have a strange problem. When opening a OWA (outlook web access site, https) with the browser, it my E75 (or better the browser) requires a NTLM authentification. Before the firmware update that behavior was different. In the "good old days" just username and password were enough. This is definetely related to the firmware update on my E75, because it started the minute after the update was installed.
Question, do I miss any settings? Is there a detailed changelog for the changes within the browser based on version 201.12.01?
Any help apreciated. Thanks in advance.
Alph

I think it comes down to the same thing. You need a username and a password.
http://msdn.microsoft.com/en-us/library/aa378749%28VS.85%29.aspx
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

  • E75 problems after upgrade to version: 201.12.01.

    I've noticed the following problems after the phone software upgrade to version: 201.12.01.
    During the call, when I in move, for example, in car, and the phone switches between different base stations, the conversation breaks.
    When I have poor network coverage, where the phone all the time looking for better coverage, in general conversation is impossible. After few words screen appears, "connection error".

    After update to 201.12.01 version I have problems with Mail for Exchange. It can't download email message from Exchange 2003! We don't want to upgrade on Exchange 2007 version! 
    Error message is: "Security Policy that enables downloading HTML messages is disabled" (mayby sorry for  wrong translate from Russian)
    Message Edited by demonas on 08-Dec-2009 06:58 PM
    Message Edited by demonas on 08-Dec-2009 06:58 PM

  • Could not load file or assembly 'Microsoft.TeamFoundation.Server.WebAccess.Requirements'

    I recently started getting the above error while trying to access a local installation of TFS 2013; the full error is as follows:
    Server Error in '/tfs' Application.
    Could not load file or assembly 'Microsoft.TeamFoundation.Server.WebAccess.Requirements' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
    Stack Trace: 
    [FileLoadException: Could not load file or assembly 'Microsoft.TeamFoundation.Server.WebAccess.Requirements' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))]
    [FileLoadException: Could not load file or assembly 'Microsoft.TeamFoundation.Server.WebAccess.Requirements, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))]
    System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
    System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +467
    System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection) +108
    System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +25
    System.Reflection.Assembly.Load(String assemblyString) +34
    System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +49
    [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.TeamFoundation.Server.WebAccess.Requirements, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))]
    System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +772
    System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +259
    System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +163
    System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +227
    System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +76
    System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +331
    System.Web.Compilation.BuildManager.ExecutePreAppStart() +176
    System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +723
    [HttpException (0x80004005): Could not load file or assembly 'Microsoft.TeamFoundation.Server.WebAccess.Requirements, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))]
    System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +557
    System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +107
    System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +690
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.34248
    As far as I'm aware, nothing has changed on the set-up.  Can anyone point me in the right direction for a fix / cause, please?

    Hi Pcmichaels,  
    Thanks for your reply.
    As far as I know there’s an actual/direct fix or KB for this error, we need to troubleshooting which specific operation or update caused the error.
    If it ever happen in your production TFS Server, and it not be resolved, we suggest you contact a professional support service to resolve this error.
    When an error happened in a TFS Server, we should resolve this error in this current TFS Server version. Don’t upgrade this ‘issue’ TFS Server to higher version of TFS before you resolve/remove this error from current TFS Server, unless the higher version
    of TFS released the KB to resolve this specific error. Which issues be fixed in Update 4, you can check the list in this KB:
    https://support.microsoft.com/en-us/kb/2994375/. If this specific error is not a known/fixed issue in Update 4, it may be cannot upgrade to Update 4 successfully, and may cause the new issue in Update
    4 Server if you force upgrade completely. Then it’s hard to find the root cause of this specific issue in Update 4 Server.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Outlook client requirements and Exchange 2010/2013 coexistence

    Good morning!
    A question regarding Exchange 2010/2013 coexistence and the Outlook client requirement. I am upgrading and about to install Exhange 2013 into an existing Exchange 2010 Org. The current 2010 Org is patched to SP-3 and Outlook Anywhere is currently disabled.
    I have Outlook clients that do not yet meet the minimun requirements for 2013 (Outlook 2007/2010). When I install my first 2013 server will it effect the current downlevel clients? The mailboxes are still in 2010 so my thoughts were since the Office upgrade
    including Outlook has not yet taken place I didn't want to wait for them to at least get 2013 into the Org. The 2013 server should effect the clients until I configure the CAS on 2013 and only when they are at the proper version, is this correct? Does Outlook
    Anywhere need to be first enabled and configured on the 2010 CAS before I attempt the confgiuration on the 2013 CAS? I just dont want to install 2013 and have Outlook connectivity issues right out of the gate...
    Thanks in advance!

    Outlook 2007 and 2010 are supported for Exchange 2013, you just need to push out the latest patches.
    http://technet.microsoft.com/en-us/library/aa996719(v=exchg.150).aspx
    If you configure the URLs properly in Exchange 2013 to URLs that point to the Exchange 2010 servers, your clients shouldn't try to talk to the Exchange 2013 server.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Error: libxml2 version 2.6.11 or greater required+php_oci8.dll problem

    Dear all,
    While i'm trying to compile php5 for installing on Linux AS 3, I got the error message related to xml lib "configure: error: libxml2 version 2.6.11 or greater required".
    although i download libxml2-2.6.22-1.src.rpm from xmlsoft.org and rpmbuild --rebuild this package, i still got the same error message?
    How to solve this? My purpose of this installation is to get php_oci8.dll and ora_logon.dll because i can't connect to oracle from php!
    (oracle 9i, linux as 3 and php5)
    Very appreciate for anyone help..,
    iKhmer

    Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
    -- cj

  • QuickTime version 7.1 is installed, iTunes requires QuickTime version 7.1.3

    QuickTime version 7.1 is installed, iTunes requires QuickTime version 7.1.3 or later. Please reinstall iTunes.
    That's the error message I have gotten for the past 3 days since trying to upgrade itunes. I have the newest quicktime downloaded, have deleted itunes and quicktime and redownloaded it all, and it still won't work. I have NO idea what to do to make this work, but it's driving me crazy. If anyone can help, please give some advice.

    You can try to fully remove both iTunes and Quicktime. Then reinstall the software again. The following link will walk you through the removal of both programs. Make sure you complete Step 16 in the article. Good luck.
    http://docs.info.apple.com/article.html?artnum=93698

  • "Quicktime version 7.0d0 is installed, iTunes requires Quicktime version...

    "Quicktime version 7.0d0 is installed, iTunes requires Quicktime version 7.0.3 or later.
    Please re-install iTunes."
    This just popped up when I opened iTunes today. So I re-installed itunes from the website. I try and open it and the message keeps coming up. I have tried re-installing several times and restarting my computer, but it keeps coming up.
    Any help fixing this problem would be greatly appreciated, thanks.

    Yeah same here, all started when I tried to upgrade
    to version 6.
    YESSSSS!¬!!!!
    Thankyou everyone - SORTED!
    1) turn off your virus protection software
    2) deinstall QUICKTIME only (standalone)(click onlink below)
    3) reboot - turn off virus protection
    4) resintall QUICKTIME only (standalone) (click on line below)
    5) reboot
    Heres the link : http://www.apple.com/quicktime/download/standalone.html
    should work! worked for me! GOOD LUCK

  • Quicktime version 7.0d0 is installed, iTunes requires Quicktime version 7.0

    Hey, just installed the newest version of iTunes today off the iTunes site.
    Getting the following message:
    quicktime version 7.0d0 is installed, iTunes requires Quicktime version 7.0.3 or later. Please reinstall iTunes.
    I have re-downloaded the install file and ran the "repair" option, but no good has come, same error.
    Any suggestions?
    P.s. It worked fine after the install was first complete, it was after I restarted the PC that it wouldnt work.

    I needed to hunt down an instal file for JUST quicktime (not quicktime and iTunes - doesnt work)
    Here:
    http://fileforum.betanews.com/detail/QuickTimeforWindows/948389372/1

  • Quicktime version 7.0d0 is installed, iTunes requires Quicktime 7.0.3...

    My error message is: Quicktime version 7.0d0 is installed, iTunes requires Quicktime 7.0.3 or higher. Please reinstall iTunes.
    This all started when I was trying to upgrade. I have downloaded the new quicktime and when it came to the option of reparing or uninstalling, I chose repair.
    I read through other problems, but didn't find this error message.
    Can anyone please help me? In a way in which I don't lose my library?

    Sorry. Um. Try to completely remove the Quicktime program from the Add/Remove directory via Control Panel. Reboot your computer. From the Apple website Save the Quicktime program to your Desktop (i.e., rather than "run from this location.") Install Quicktime by clicking on the Quicktime install program that should be present on your desktop. When it is done, reboot your computer.
    http://www.apple.com/quicktime/download/standalone.html
    I hope that that is the correct link.

  • Safari won't display Microsoft Outlook WebAccess pages correctly

    Hi,
    The scroll bars are all messed up when displaying MS outlook webaccess pages. It works fine in firefox, is there any solution to this.
    Also my companies SAP portal pages have the same issue.
    What gives with Safari....
    Mark.

    post a screenshotof it, upload it to an image hosting place such as photobucket or imageshack.us
    because i think i might know what your talking about and want to see if its the same issue i experience with various sites.
    safari itself is NOT up to standard and apple developers are aware of this, their color renderings, font display and website coding/rendering are a tad behind wiht the new current of browser standards.
    might also try the webkits available to see if that resolves the issue.

  • The SYSVAL table entry for the database version (16) does not match the required version

    We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers.  I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31.  I get the error below.  Note, SQL went from 2005 to 2012 during this upgrade.  Do I need to change a value in this table to reflect the SQL change?
    [04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
    [04/29 12:47:14:198]:Java version: 1.8.0
    [04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
    [04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
    [04/29 12:47:14:198]:----------------------------------------------------------------------------
    [04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
    [04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
    [04/29 12:47:14:198]:Maximum number of log files = 100
    [04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
    [04/29 12:47:14:198]:LogManager: setting default log
    [04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
    [04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
    [04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
    [04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
    [04/29 12:47:20:282]:
    [04/29 12:47:20:282]:
    [04/29 12:47:20:282]:Shutting down the application

    I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
    As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

  • Error /lib/libgcc_s.so.1 : version 'GCC_4.2.0' not found (required by  /usr

    Hi,
    I have written a cpp plugin to call when the deactivate workflow is processing I have the OAM 10.1.4.3 version installed.
    I am able to compile the file. But when try executing it from the workflow i am facing the below issue.
    Error /lib/libgcc_s.so.1 : version 'GCC_4.2.0' not found (required by /usr/lib/libstdcc+.so.6)
    Help me resolve this issue
    Thanks.

    Hi,
    I think you are in the wrong forum here :-)
    Regards
    Patrick

  • I cannot upgrade lion server to mountain lion server. i get an message that Server can't be installed on "Server HD" because Mac OS X version 10.8 or later is required.

    I am trying to upgrade to mountain lion server from lion server. When i try an download the latest version of OXS from the app store, i get an message that Server can’t be installed on “my HD” because Mac OS X version 10.8 or later is required. I have lion 10.7.4 installed

    OS X Server: Upgrade and Migration

  • Can't installed on Macintosh HD because Mac OS x version 10.9 or later is required

    I tried to download iPhoto app on this mac pro but it come pop say "We could not complete your purchase" iPhoto cant be installed on "Macintosh HD" because Mac OS X version 10.9 or later is required..
    ??????  I already update version but still wont open.. I want to save my photo from my iphone to transfer to my mac iphoto to save in my flash drive but nothing help..

    deaflori,
    your “signature” states that you have a 13-inch Late 2011 MacBook Pro with Mac OS X 10.5.7 installed; this is an unlikely combination. If this is your model MacBook Pro, which version of OS X is currently installed on it?

  • Xcode Install Assistant can't be installed on Macintosh HD because Mac OS X version 10.7 or later is required.

    I am a new user on a mac. I was given a mac to use for work and I need to install Ruby, Ruby on Rails. The Ruby install instructions said to install Xcode first.
    The mac os x is 10.6.8. I had a problem trying to install xcode because it said the operatin system version was not compatible .. Then I found xcode version 4.2 but it then said "Xcode Install Assistant can't be installed on Macintosh HD because Mac OS X version 10.7 or later is required."

    The message kind of says it all. It needs a more current version of the OS to install. Mavericks is free if your machine meets the specs for it.

Maybe you are looking for

  • HT204074 How to remove a device from my Apple ID

    I have been sharing an apple ID with my mother for the last few months as she forgot her original apple ID password. Now i want to remove her iphone from my account - can I remove this device without her losing all of her phone numbers and photos etc

  • Error in syncing - the iphone couldnt be synced because this computer is not longer authorized for purchased items on this iphone

    the iphone couldnt be synced because this computer is not longer authorized for purchased items on this iphone... to authorize this computer choose store and authorized................ this message coming again and again as i already authorized my co

  • One CUP request for assigning role to multiple users

    Hi, We assign roles to users in production only through CUP requests.. We use GRC 5.3 Here we have a case where we need to assign one role to  60 users in production(each user may have different  roles assigned in the back end) . I can raise one CUP

  • Cyan overprint in white border around pix

    Using Epson 1900 and CS5--- Using Colormunkie created paper profile for Epson paper - using any paper surface and problem exists.. It is printing a light cyan overprint on the white borders around the pictures. There is no cyan overprint in the pictu

  • How do i change me security answers?

    I don't know the answers to my security questions >.< In order to change them.. I need to know the original answers (I think).. Does anyone know a way to change the answers without entering your original answers? o.o