E90 ext. display doesn't work

I have a E90, and the exterior display simply stays black, at all times
the keys work, if i do something and then open the phone, it works fine
but the display is always black
please help. thank you

i tired that, and it didn't work
and, its better no sceen then any screen
i paied full price, i get 2 screens for that
Thanks for your help, any other solution?
Message Edited by 3L0D13 on 01-Oct-2009 05:09 PM

Similar Messages

IMac - Display doesn´t work after restart

My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade

Hi,
After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
Does anyone have similar experience. Anyway to fix it?
Thanks,
Henrik

Have done some further investigating (to no avail). The TV is displaying in my system Info as follows:
Intel HD Graphics 3000:
Chipset Model: Intel HD Graphics 3000
Type: GPU
Bus: Built-In
VRAM (Total): 384 MB
Vendor: Intel (0x8086)
Device ID: 0x0116
Revision ID: 0x0009
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
TOSHIBA-TV:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: Supported
Television: Yes
But nothing on the screen.
Does anyone know if Apple have banned certain screens????

Apple Store said my display doesn't work but offered no solutions.

Just got back from the Apple Store. They confirmed my iPad is fine but the display doesn't work. It's black. Their only option was to pay $300 for a new iPad. Mine is only 88 days out of warranty and I took it in the store once already for the display issue that led to its ultimate demise. To talk to anyone else is $20. I refuse to pay more for a product that has shown itself to be unreliable. What's the next step? I truly feel wronged. iPad is in perfect physical condition.

I took it in in May of last year. The screen has black bars flash, the screen goes black for a moment, and then it comes back on. It can be days between the issue. When I took it in, it didn't do it. I had to wait forever even with an appointment. I didn't want to take it back in even though it has been having the issue all along. There was no way of knowing when it would happen. It finally flashed and never came back on.

New motherboard in GT680 - display doesn't work!

Hi!
I had to replace motherboard in my GT680. I've put ms16f21 version 1.2 in, the only difference between new and old motherboard is the version. 1.1 is used in GT680, and 1.2 is used in GT683. I've read somewhere there's no difference between these motherboards, so my GT680 should work with version 1.2.
And it turns out my display doesn't work now . Does anybody know what might be wrong? I've checked connections and battery on motherboard, and everything seems to be placed where it should be.
I thought it may be because of my graphic card. I've got 460M (standard for GT680), and GT683 usually have 560M. Do you think I might have to upgrade gpu too?
Ps. Please don't tell me it's best to ask MSI support, I wouldn't write on forum it that solved the problem .
Thanks in advance:)

Quote from: SialeQ on 11-June-13, 04:51:09
Defective motherboard is quite likely, I just wanted to rule out any other possibility before I contact a seller I'll do one more test tomorrow, I'll put the old motherboard back. If it works, new board is probably damaged and I'll have to contact seller. If old board doesn't work either, then I messed up something when putting laptop together (or another component magically decided to die)
I'm not sure if MSI would replace it, I bought it second hand on ebay, and both warranty seals (on case & on graphic card) are broken :/
The seals being broken won't void the warranty, as long as there is no internal user caused damage they will cover it. I just don't know what the coverage is for second hand.

The display doesn't work when phone is locked

My z3 is abt 6 months old
Recently I locked my phone and tried unlocking it but the screen never turned on though I can see the screen lighting up a bluish colour but the display doesn't appear.
I have to swith off the phone for around half an hour and restart for it to work.
Any idea why

Try repairing your phone with Sony PC Companion
Sony PC Companion.
http://support.sonymobile.com/us/tools/pc-companion/

My iMac Display doesn't work!

I hear the sound when he starts but the display stays dark! why?
Please Help me!!!

First, detach any peripheral devices except keyboard/mouse. Then reset the SMC:
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
If that doesn't change anything, follow the steps in this Apple note: http://support.apple.com/kb/TS2570 . When you get to the section on using Disk Utility to repair the disk, use Lion recovery mode by booting with command and R held down. Assuming of course by then you can view something on the screen. If the screen still doesn't work, take it in for service.

IMac 17" Intel CD: display doesn't work

ciao,
today when I switched my iMac on the display remained dim, just like if it was off, while everything else worked OK.
so the display was black like it was off, but then I noticed that if I looked very carefully I could see the login box and I managed to log-in.
to cut the story short: the iMac is working OK but the screen is so dim it looks like it is off.
what can I do? Apple support chat told me to try to reboot the iMac pressing Command-Option-P-R, and that this doesn't work it is an HW problem: any other suggestion/reccomendation?
thank you very much
andrea
ca.pattacini[at]gmail.com
iMac 17" Intel Mac OS X (10.4.6) Display not working...
iMac 17" Intel Mac OS X (10.4.6) Display not working...

Try the F14 & F15 buttons. Those control the brightness of the screen. That should be able to solve that problem. I had that thing before until I messed with the keyboard and "discovered" it.

My macbook pro suddenly turn off and now when I turn it on the display doesn't work but it is on!

Hello everyone,
My macbook pro 15" suddenly turned off. Now i tried several time to switch it on and seems it is working but the display doesn't function or there are many wired pictures coming up sometimes.
can anyone please help me with this issue?
Thanks

Welcome to the Apple Support Communities
Your Mac can't find any bootable partition.
1. Insert the Mac OS X DVD that came with the Mac and press C key while your Mac is starting.
2. Select Utilities > Disk Utility, choose Macintosh HD in the sidebar and repair the disk. If it doesn't work, take the Mac to an Apple Store.
Also, open  > Startup Disk, select Macintosh HD and restart. Maybe your Mac has forgotten the startup partition

Why Detect Displays doesn't work anymore?

I use my PB to watch movies using my TV and the S-Video to RCA cable, but since the last upgrade 10.4.6 the Detect Displays option (in display menu bar AND preference pane) doesn't work.
The TV shows a dimmed image of what's suppose to show and sometimes it appears vertically distorted.
I disconnected the S-Video cable and restarted the PB but it still shows that "something" is connected to the s-video port.
Which files should I delete to "reset" video preferences?
UPDATE: PRAM reset didn't work...
Thanks in advance

Well, the cable can't be the problem, because the computer is "stuck" with a two monitor configuration, even without the cable plugged in, that's why im guessing there's some kind of switch (i hope) that i can reset so the mother board stops thinking i have another display plugged.... the second problem is that if i plug the s-video to rca cable (that came with the laptop) i can't get a clear tv signal from it... it's distorted.... i'll probably open up the computer and check the s-video port... wish me luck.

MacBook Pro display doesn't work

Hi everyone,
My MacBook Pro's display has been working erratically in the last weeks.
The first time, the display did not work for two day. Second time for almost a week (during Easter) and now for three days.
I've never had any hardware related issues with my old Apple computers, so this is very strange to me.
I've already followed the instructions posted here: http://docs.info.apple.com/article.html?artnum=300537
The computer seems to work normally, I can hear the startup chime and the drive spinning if I get close to the machine. The problem is the display or the graphics card.
I am in Peru at the moment and contacted the local Apple Reseller and they've told me it takes approximately 60 days to have it repaired. I'm thinking about flying to the US to have it repaired quickly, I can't wait that long.
My Mac's specs are:
MacBookPro3,1
Intel Core 2 Duo 2.4 GHz 2 Cores; 4MB L2 Cache; 4GB RAM; 800MHz Bus Speed;
Boot ROM Version: MBP31.0070.B00
SMC Version: 1.18f2
Graphics/Display specs:
Chipset Model: GeForce 8600M GT
Type: Display
Bus: PCIe
PCIe Lane Width: x8
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3172
Displays:
Color LCD:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Has anyone had a similar problem? Were you able to solve it without taking it to Apple?
Thanks for your help!
Percy
Message was edited by: YoQuieroTacoBell

I am going to chime in because I had the problem, did an archive and install which fixed the display problem but a display issue is back again! When I did the Archive and Install, I purposefully did NOT install the graphics update. That fixed the issue until yesterday...... I think the monitors worked alright when I started up in the morning but later in the day, I noticed that the external monitor (SyncMaster225BW) was a yellowish color and the letters were distorted. Ok, so I unplugged it and previously when I unplugged it (since the Archive and Install anyway), the MBP display would go blue but come right back on. Not so yesterday. It stayed blue so I had to press the power button to get it to go off. Booted up and came on. Plugged the external monitor in (can't remember if I plugged it in while it was shut down or after) and it worked fine. Booted up this morning and the resolution and color on both monitors was yellowish and not right. In fact "mirroring" was turned on, something that I did not choose. Recalibrated my MBP monitor. Got that right. Oh, and yesterday and today, I had to choose my background pictures for both monitors. Couldn't get the external monitor to work right so unplugged it which caused the MBP monitor to go blue and stay blue. Had to reboot again. Left the external monitor unplugged. Started writing this post and plugged in the external monitor again and all is right. Both have the correct background picture and resolution and in the menu bar, both are listed with the correct names (first thing this morning they weren't named Color LCD and SyncMaster). So anyway, that is my display woes. I was so happy that all was well after doing the Archive and Install and not doing the graphics update but something else is going on now. Not sure what. Hope this issue gets fixed soon! Please Apple....... Judy

Mac book display doesn't work anymore

I normally use my mac book 2011 with an external display. However, for the past few days, the macbook display is not working. The computer boots up, but will only display on the external display with the lid closed. How do I fix this?

Thanks for replying.
Are you referring to an F2 key on the MacBook? As in, "did I try brightening the MacBook display"?
If so, yes I have. If I. Completely darken (F1 key) then brighten the MacBook display using the F2 key, I get the same less-than-one-second result before screen blanking. The display is actually still there, but completely inlit.

Display doesn't work after latest security update

I have three Apple displays with my MacPro, and after installing the latest security update, one of them just stopped working.
The status light is still on, and my usb devices connected still function, but I have a black screen and nothing is recognized in the displays system preferences.
Anyone else experience this? Did my display just die?

Ut-oh!
FWIW:
My 7-year-old 22” Cinema Display, on a 10.4.11 machine, with nearly constant use, now becomes so dim during the screen saver mode that regardless of which saver I use, it becomes no longer visible.
As soon as the screen saver is activated, I have full brightness (though not as bright as when the display was new), then it gradually fades until the screen is all black.
Upon awaking, the screen is very dim, and then, over a 90 second period, it slowly returns to normal brightness.
1. The brightness control is set to max.
2. I have toggled the brightness control and changed screen savers, both to no avail.
3. Recalibrating the display did not work.
This seems to have occurred on the same day I installed the latest Apple Security Updater.
Very weird...

Display doesn't work after power outage

The electricity was knocked out in my neighborhood for a few hours and when it was finally restored I found that my display no longer works. It is getting no power at all. None of the lights on the front of the display are working--it's totally dead.
No settings or connections were changed during the time when there was no electricity. So it's obviously a result of the power outage, right? I had it plugged into a surge protector (which I thought was supposed to be a safeguard against exactly this type of occurence) so I'm wondering if that has somehow saved me--only there's some secret Mac trick that needs to be done to get my display back to life.
Can anyone please help me? This economy is strangling me to death--I simply cannot afford to buy a new display at this point.

I just realized that I never actually asked my question (duu-uuuh):
Can anyone tell me if there is a way to figure out (without having to spend any money) if my problem is only with the power supply or if the entire display is just garbage at this point?
Or perhaps someone has experienced this situation, was able to resolve it and knows what I should do to make my display functional again?

Macbook pro retina display doesn't work occasionally. Random restarts. I can remote into the computer when display isn't working correctly

I have some issue with my 2012 Macbook Pro Retina. The screen intermittently decides to just not work. Sometimes on startup i hear the start up noise but the screen doesn't turn on. I am able to remote into the computer when the screen doesn't work. I can't seem to find any rhyme or reason as to when it works and when it doesn't. I've reset the PRAM and SMC sometimes that will bring the screen back sometimes not.
Any ideas?

You can try the Apple Hardware test, not definitive by any means, especially intermittent problems, but it is a start.
AHT http://support.apple.com/kb/HT1509
I think i would take it in for a free 'Apple Service Diagnostics' test
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

E90 ext. display doesn't work

Similar Messages

Maybe you are looking for