E90 - How to switch off GPS and other apps etc and...

I have just got my new E90 a few days ago, it is back on the market, so far it is terrific, no issues what so ever. However I thought I had exited the GPS app correctly, but the battery drained quite quickly as I think it was on ( few hours). How does one know what is running, eg is there is an equivalent Task manager like in Windows ? When I reboot and dont start the GPS the phone battery has lasted for days.
By the way - initally my E90 GPS took less than 1 minute to lock in, and thereafter it takes seconds. Quite amazing.

07-Oct-200708:40 PM
wolf666 wrote:
07-Oct-200705:45 PM
tonyl wrote:
Another Question - can I use the phones USB port to access an external memory device such as a 40G or 120G HD or even the solid state USB memory sticks ?
PS I am really enjoying this phone compared to my previous SE P910i, and others.
Not sure what you mean, you can only connect to a PC running PC suite and having the usb drivers installed.
More then this, access is triggered in one way PC to E90, not in the reverse !
I didn't event tested it, but almost sure it won't work.
Domdom

Similar Messages

How to switch off scroll and zoom functions of touchpad on Satellite L

Hi.
Can anyone tell me how to switch off the scroll and zoom functions for the Synaptics Touchpad v7.2 .
Can't seem to do it via the Control Panel.
Any suggestions.

Hi buddy,
> Can't seem to do it via the Control Panel.
You can only disable the virtual scrolling function if the touchpad driver is installed properly. The driver provides extended functions and allows you to disable/enable special features. If you dont have installed the touchpad driver download it on official Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Then navigate to control panel as the previous user wrote for disabling the scroll function.
Can you find it now?

How to switch off GPS on E6?

Is there a way to switch off GPS on E6?
I see that some applications automatically access GPS without asking my permission. Eg. Facinate. I would prefer to have a way of disabling it.

farby wrote:
You need to check the Settings within the subject applications...
Referring 'Location Information' HERE may give some idea ...
I have never used their check-in facility. As soon as the application is launched, the GPS antenna icon comes up in the indicator bar of home screen.
There is no way of disabling this unless I uninstall the application as mentioned in the page you linked.
Even if I believe that they will not harvest my GPS info, what is the guarantee that another rogue application will not do it without my consent? That is why I was looking for a manual method of switching off GPS access.

How to switch off screen blocking if I forget password and couldn't use iTunes?

How to switch off screen blocking if I forget password and couldn't use iTunes?

If you are saying that you've forgotten the passcode to unlock the iPad then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode for your iTunes to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

I have such problem, at iphone 4s connection to itunes there is a synchronization well and after iphone is frozen and the woman explaining the instruction starts to speak (How to unblock how to switch off a sound, etc.). iphone reacts to one team, and the

I have such problem, at iphone 4s connection to itunes there is a synchronization well and after iphone is frozen and the woman explaining the instruction starts to speak (How to unblock how to switch off a sound, etc.). iphone reacts to one team, and the woman tells everything and speaks. I took iphone from a wire, but it didn't react. At attempt to switch off it it is switched off, but deletes all files which only existed on this device. What to do and how to solve this problem?

Try posting in your native language. I can't even figure out what your "problem" is from this.

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

How to switch off internal macbook screen when using external monitor(s)

as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

How to switch off the pop-up message in rspcm

Hi there,
Does anyone know how to switch off the pop-up message in rspcm?
The monitoring user shouldn't get the pop-up below anymore:
Statusänderung des Requests Sollen Folge-Events ausgelöst werden?
The pop-up in english might be
status change of request - trigger subsequent processing? or similar
We would like to outsource the process chain monitoring (rspcm) to our operating.
But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
Thanks for your help in advance.
Regards,
Wolfgang Smetana

Elena,
Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
Arun

How to switch off the error sound in Triversity

Hi
How to switch off the error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

Mohammed,
There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
You should be golden right after the reboot.
Hope this helped,
Alfredo Carigga

How to switch off the Wireless Transmitting of the xDock for the iPod?

Hey,
Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
Thanks for your help. ;-)
Hi,
Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
Vielen Dank im Vorraus f?r eure Hilfe ;-)

turn it into standby mode
unplug the power supply from the x-fi dock
press the volume controller and hold it while plugging the power supply
the link control led on the backside will glow shortly and and turn off
thats it
to reactivate it press both the forward and backward wind button for at least 3 seconds
But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.

How to switch off my main screen (Imac 24") to use an external proyector?

Please Help!
How to switch off my main screen (Imac 24") to use an external proyector?
It's not comfortable when you want to see a nice movie!
Thanks
Jack

As I already said in my first reply post, you cannot turn off the iMac's display. The best you can do is display black, which many applications that have a +full screen+ mode will do, if the full screen mode is on the other display.
Alternately, you can move the menu bar (along with Dock and disk icons) from the iMac's screen to the second display. This is done in System Preferences Displays pane Arrangement tab, by dragging the white bar in the diagram from one screen to the other. Once the menu bar and other features are on the second display, the only thing showing on the iMac's display should be the Desktop background. If you pick a Desktop background that is all black, your iMac's display will be showing a black screen (although it will still not be turned off).

DOM Parser Configuration...how to switch off DTD validation?

Hi all,
I am developing some implementation code in Java using JBuilder2005, in which DOM3 parser is also being utilised. Now the question is how to switch off DTD validation (seems its default mode is 'on') so that no validation will be carried out at all even DTD declaration statement is presented in an input XML document?
Many thanks in advance
Frank

First of all, thank you so much for responding, DrClap. =)
setValidating(false) of the DocumentBuilderFactory instance, factory, does not work as expected; it still stubbornly try to seek the external DTD file and fires 'IOException' error in case of no such a DTD.
To follow up the EntityResolver approach, I searched online for almost the whole afternoon but still could not figure out how to do it exactly. In particular, I found http://www.jdom.org/docs/faq.html#a0350, which tells a way doing it, but I got 'StringBufferInputStream is deprecated' error. Then I changed to
new InputStream(new ByteArrayInputStream("".getBytes()))adapted from http://forum.java.sun.com/thread.jspa?threadID=572919&messageID=2842185. But another error occurs: 'java.io.InputStream is abstract; cannot be instantiated'. Furthermore, I have looked at many docs(tutorials, APIs...) on parser configuration, usage of EntityResolver/setEntityResolver()...but they turned out not helpful. Could you please give out more details on how to do this using EntityResolver?? Many many thanks...

How to switch off web cam?

Hello
Does anybody know how to switch off web cam? It interferes me when I touch it with my mouse accidentally.
Thanks

Hi roxol,
> It interferes me when I touch it with my mouse accidentally
Im a little bit confused about this How you can touch it with the mouse?
Furthermore your posting is not very detailed. I miss some important informations about your notebook and OS.
At the moment I can only say that you should reinstall the webcam driver. The newest version you can find on the Toshiba website.

How to switch off SAML with WSRP

Hi all,
I want to integrate SAP EP as a producer fpr WLP 10.3.2 as a consumer. For that I want to switch off SAML stuff since I want to start simple.
Any hints how I can switch off SAML and how I can use username and password instead?
Many thanks in advance
-Peter

Hello Nate,
I made the changes to mentioned but SAML is still on.
I started a test with the OpenPortal WSRP project (https://wsrp.dev.java.net/public/Download.html) on Glassfish for the producer.
Below you see a Wireshark recording (OpenPortal WSRP). The SAML stuff is still there,
Any further ideas?
Many thanks
Peter
POST /producer/wsrp/router/v2/servicedescription/SampleProducer HTTP/1.1
User-Agent: Oracle JAX-RPC 1.1
Content-Type: text/xml; charset=UTF-8
SOAPAction: "urn:oasis:names:tc:wsrp:v2:getServiceDescription"
Accept: text/xml, application/xml, multipart/related, */*
Accept-Charset: UTF-8
Host: localhost:8080
Connection: Keep-Alive
Content-Length: 1743
<?xml version="1.0"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header>
<Assertion xmlns="urn:oasis:names:tc:SAML:1.0:assertion" xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion" xmlns:samlp="urn:oasis:names:tc:SAML:1.0:protocol" AssertionID="d837db50e1e067daa359be87b00a8b59" IssueInstant="2010-07-01T14:20:18.094Z" Issuer="http://www.bea.com/wsrp/saml" MajorVersion="1" MinorVersion="1">
<AuthenticationStatement AuthenticationInstant="2010-07-01T14:20:18.093Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:unspecified">
<Subject>
<NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified" NameQualifier="wsrpConsumer">weblogic</NameIdentifier>
<SubjectConfirmation>
<ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</ConfirmationMethod>
</SubjectConfirmation>
</Subject>
</AuthenticationStatement>
<dsig:Signature xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
<dsig:SignedInfo>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#dsa-sha1"/>
<dsig:Reference URI="#weblogic">
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<dsig:DigestValue>2jmj7l5rSw0yVb/vlWAYkK/YBwk=</dsig:DigestValue>
</dsig:Reference>
</dsig:SignedInfo>
<dsig:SignatureValue>Y0ka5F0BuN7sPVqOwBiS6I6FE1EccPblntzPfOlUWsg9bzeuUu90+Q==</dsig:SignatureValue>
</dsig:Signature>
</Assertion>
</env:Header>
<env:Body>
<v2:getServiceDescription xmlns:v2="urn:oasis:names:tc:wsrp:v2:types">
<v2:registrationContext xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<v2:userContext xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
</v2:getServiceDescription>
</env:Body>
</env:Envelope>

How to switch off a workflow ?

Hi ,
Anybody has an idea how to switch off a workflow ?
Reply soon.
Thanks a lot,
Sandip.

Hi Sandip,
You can display the Workflow template using tramsaction PFTC or PFTC_DIS. Check the 'Triggering Events' tab to see if the WF is started by an event with a Green light icon. If so you can turn off the event linkage by clicking on the green light. If this is in Production, you have to disable in Dev and transport the change.
If no Triggering events exist, it may be started directly.
Depending on what the WF is doing, you should be able to get a fairly good idea of from where. If it is not a custom program, it probably is done through configuration.
Cheers,
Ramki.

E90 - How to switch off GPS and other apps etc and...

Similar Messages

Maybe you are looking for