E90 Internal Screen Always On

Hi, I have a e90 and I was changing the housing on it. I got it all together but now something weird is happening. The Internal LCD screen is always on, even when the phone is closed its still on and the external screen will not activate. I know the screen works because when it powers up the outside lcd turns on and says nokia but then immediately the inside one is activated. Any help? Thanks in advance.

did you forgot to put back the neodymium magnet at it's place?
if you don't know where, it's just by the end call key left side, when you open the internal display.
I haven't completely opened my own but I did opened the external only and change the faceplate and keypad. I have two e90 any way . the other one is for experiment.

Similar Messages

E90 Internal Screen Problem

Hi,
on 8 of Feb i got the E90 and today for no apparent reason the internal screen is not displaying nothin simply totaly black
any one had faced such issue ? any fast remedy or a service center is the only solution
appreciate your feed back
regards
Sharbel

The problem is probably hardware related so I am afraid a visit to the Nokia Care Point is probably the best.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

After Updating OS X from 10.8.2 to 10.8.3, Startup screen always crashes

After Updating OS X from 10.8.2 to 10.8.3, Startup screen always crashes. I also submitted to Apple bug reporter with the Bud Id#13438371
Steps to Reproduce:
1-Press the startup button.
2-Loading circles appears on the screen,
3-Wait more than usual,
4-Then, before Login window (only one user and its admin login) appears, screen view crashes for a few secs.
5-After few secs screen view back to normal and login window appears.
Please check for more details about startup screen crashes
I uploaded to youtube. link is below;
http://youtu.be/-0Tk7OM7Qf8
Has anyone come across this issue?
Thanks in advance,

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

2 external monitors and internal Screen on T430S and Mini Dock Plus

Hi Community,
I just got my new T430S and the MiniDock Plus. On the website I've ordered the combination I had the impression that I could use two external screens and the internal screen at once.
Unfortunately I don't manage to find the right settings to achieve that the internal screen is switched on.
I wonder if its just a question of settings or is it simply not possible to extend the screen over three screens.
Any help or hint is greatly appreciated,
Andreas

Intel 3000 doesn't support 3 independent LCD in this manner. You would need something USB2DVI or USB2VGA adapter to get the third LCD.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

IMac G5 (iSight) with 10.4.11: Screen always dimmed. Starts at full bright and a second later dimms and stays like that forever. Brightness controls work normally under this circunstance. Please help !!!

iMac G5 (iSight) with 10.4.11: Screen always dimmed. Starts at full bright and a second later dimms and stays like that forever. Brightness controls work normally under this circunstance. Please help !!!
Please don't tell me to adjust anything on the preferences, since I have tried all. I think it may be anoter kind of problem, maybe hardware related or anything.
I ran the Hardware repair DVD and everything was ok, but when the imac restarted the screen was very lit again, but when it went sleep, when it went awake again the screen got dimmed again. Because of that I think that the problem could be software related, but who knows. Excuse my english.

I can't see another possible answer - the longer your machine is up, the more the power supply is stressed, it protects itself by dimming the screen to lower the draw on it.

Reset all settings and contants ipad.Now ipad is not open?why?on the screen always apple icon.

reset all settings and contants ipad.Now ipad is not open?why/ on the screen always apple icon.

Why would you do that? That's not how you deal with issues on your iPad, that's how you deal with problems on poorly designed Windows machines.
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430

IMac 7,1 turning internal screen off while watching a movie via output (second display), possible?

iMac 7,1 turning internal screen off while watching a movie via output (second display), is it possible with Lion?

Actually, Plex does the best job by placing a black background to the internal iMac screen it's called Blanking.
However that does not turn off the backlit which is very bright on the iMac 24" also the internal screen will draw more power that way. As you probably know running bootcamp you can turn off the internal screen while watching a movie on the external. This isn't a hardware limitation, I hope Lion has this feature.

Internal screen vertical interlaced

Just out of nowhere my internal screen now and than turns out vertical interlaced. Either with black or white lines, alternating between normal screen at one vertical pixel row and a black/white line on the other. Like the interlace filter from the old days.
It's seems quite random, no heating issues or special software and the MBP is mostly sitting on my desk.
The mac keeps on functioning and the external display doesn't show the problem.
PR-ram/SMC reset didn't resolve the problem, it just stops and shows up again after a while.
Any idea's what could be wrong? I saw another post covering the same problem, but it wasn't solved.
Thanks!
Sebastian.

Hi all,
since approximately 4 weeks I have exactly the same problem like you guys describe. I already described it here
http://discussions.apple.com/thread.jspa?threadID=2765765&tstart=45
but unfortunately nobody answered. Without having "apple care" or any other guaranty, after seeing a couple of pictures from the NVIDIA BUG PROBLEM and talking to some people, I decided to replace the display. Unfortunately the problem continues.
I think it is not very likely that the NVIDIA BUG Problem is causing such an consistent imaging error like we see it on our screens. All screen shots I have seen were with more chaotic imaging errors like colored blocks or a completely scrambled pictures.
Anyway...
Even the Aplle support seems not to be able to figure out what the exact problem is.
What is with your screen shots ??? Are they OK?
My screen shots are fine and not showing this vertical interlaced pattern.
I think they are two components, other than the screen or the grafic board, who could also be the issue.
The DISPLAY DATA CABLE and the LED DRIVER BOARD..... what do you think about ?
I appreciate any suggestion,
thanks
Chris

TS4479 Apple TV2 cannot connect to Netflix .. message on tv screen always say "Netflix currently unavailable."

Apple TV2 cannot connect to Netflix .. message on tv screen always say "Netflix currently unavailable. Please try again later." I have tried both wifi and ethernet connection but to no avail. ANY HELP IS APPRECIATED.

..hi, Diesel.
..after resetting, and for the first time ever, ATV2 is able to access Netflix and that I was able to log in for the first time too! It stayed on processing for the longest time getting in into Netflix. However, the same message "Netflix is currently unavailable. Try again later." had reappeared on tv screen after. Resetted and restarted ATV2 again but the same message had reappeared.

Quicktime Player 10.3 when in fullscreen is not blanking internal screen on macbook pro on 10.9 OSX

Hi,
since going to Mavericks when I plug my macbook pro into the HDMI TV and apply fullscreen it no longer blanks the internal screen as it did previously.
Any settings im missing here?
It does in VLC player but only with the "use native fullscreen mode ticked"
I cant find any settings in Quicktime 10.3 in relation to this????
Mark.

Hi,
I afraid that your printer is too old and no longer fully supported.
As you may find listed below already since Mac OS X 10.5 scan is no longer supported for your product:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en&os=219&product=3745...
I afraid your only options are using a 3rd party solution as Vuescan or replacing your device.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Input variables screen always visible

Hi....i have a WAD and i want to know if theres a way to have the input variables screen always visible ....for example i want tha t the variables input fields always on top of the WAD, and the user can write new values and click on execute button (or something like that) and execute the WAD.......
Another option would be using input fields in WAD but i dont know if its possible to pass the web item input fields values as filter for WAD queries....
Regards

Hi Oscar,
Just add this piece of code within the <body>....</body? to your template backend

          <TD class=SAPBEXNavLine><A href="<SAP_BW_URL CMD='PROCESS_VARIABLES' VARIABLE_SCREEN='X'>"><IMG
            alt="<SAP_BW_TEXT program="SAPLRRSV" key="T76">" src="Mime/BEx/Icons/S_B_VARB.gif"
            border=0 valign="middle"></A></TD>
          <TD class=SAPBEXNavLine> |</TD>
Just check if src="Mime/BEx/Icons/S_B_VARB.gif" is present in your repository. This if for the icon.
Hope this helps...!!

Keeping video podcast screen always on top?

ok, so i click on the video podcast in itunes and it opens in a new screen,
i want to know if there is anyway to always keep that new video podcast screen always on top of mys desktop.
i usually have at least 5 or more apps open and i am going between them all the time,
i'd love to be able to keep a video podcast always on top in one corner...
help?

Use something like NicePlayer or BitPlayer. Both have the ability to keep the window on top (called floating window in BitPlayer).
NicePlayer – http://www.macupdate.com/info.php/id/15136
BitPlayer – http://www.macupdate.com/info.php/id/11459

Is the iPad air screen always split

Is the iPad air screen always split

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
Peace, Clyde

Internal screen shuts down after suspending on multi-screen configuration

Hello,
I upgraded (very) recently to OS X Mavericks on my MacBook Pro, which is plugged on a second screen via VGA. I wanted to suspend the activity on my computer, so I chose "Suspend activity" and then I closed the display panel to get the computer to "sleep".
When I open the display, the internal screen remains off and is no longer detected by the system. When I go to "System Preferences" and select "Monitors", I get only the second screen preferences.
In addition to that, the background is the one set on the first screen, but adapted to the correct resolution (I use a 1920x1080 screen, the internal one is 1440x900). When I do a screenshot, only the second screen is included.
The only way to recover from this problem is to disconnect the VGA adapter and to reconnect it then.
Am I reporting this problem in the correct place, and if not, where do I need to report it?
Thank you.

Spinning wheels are not a facet of Classic operating systems. Identify your Mac with this tip:
http://discussions.apple.com/docs/DOC-6413 and post to the appropriate forum: http://discussions.apple.com/docs/DOC-2463 after checking this tip on what may be slowing you down: http://discussions.apple.com/docs/DOC-6921

Run without internal screen?

I've had problems with my iMac and it's the graphic card that's in really bad shape. It freezes after about 1-3 minutes with a black screen.
So, I had some plans on using it as a headless server and have a custom front with a fan infront of the GPU. But it seems that the iMac needs the internal screen to be hooked up in order to start, can I do some workaround? Like tricking it to think the screen is hooked up or redirect the internal to the external?

I have an idea I think might work. If the lid on a PowerBook is in the closed position, there should be no restriction with installing a new OS using an external monitor since only the external monitor will be active. I realize you don't have a screen attached anymore, but the magnetic switch that senses when the lid is closed is in the base of the PowerBook near the trackpad. That should still be in place on your PB. So you can trick it into thinking the lid is still there. See the photo here:
http://www.mrob.com/images/TiBook-400.jpg
That is for a 400 MHz TiBook, but hopefully yours is the same. Anyway, go get a magnet off your fridge and put it where that picture shows. It should put your Mac to sleep because it will think the lid was just closed. So try putting the magnet there and see if in fact it does trigger a sleep response.
If it works, then do a restart but leave the magnet there. You should be able to start from the boot CDs and install the new OS using your Viewsonic as the monitor. You have to have the PB plugged into it's AC adapter for this to work by the way.

E90 Internal Screen Always On

Similar Messages

Maybe you are looking for