E90 not connecting via USB connection

Can someone offer some advice as to why the E90 doesn't seem to connect or be recognised when put into PC suite mode, had it work once when i first got it but now all i get is 3 'USB' noises and cannot get them to talk to each other.
Using XP with latest version of PC suite.
Thanks

Does it connect in Data Transfer Mode?
Try connecting E90 with same data cable on another computer having PCSuite installed.
I am asking this because I doubt it is due to hardware problem, it has to be data cable or PCSuite on the computer.
To verify if the connecting pins are damaged on E90 you can try connecting with a bluetooth device.

Similar Messages

When Using iOs 7.1.2 OSX 10.9.4 notes are not syncing via USB. When will this be fixed. Not interested in iCloud or IMAP solution.

When Using iOs 7.1.2 with mac OSX 10.9.4 mavericks notes are not syncing via USB.
When will this be fixed ? Not interested in iCloud or IMAP solution. it worked before, I can't really
understand why apple would change one of my favorite features. I use the notes feature to
capture quick ideas on the road and having it synched on my computer and my phone was very useful.
Previous blog posts elsewhere indicated this would be fixed in the latest rev of iOS, OSX and iTunes.
But alas after the recent update it's not. Really Annoying.

poweruser_art wrote:
When Using iOs 7.1.2 with mac OSX 10.9.4 mavericks notes are not syncing via USB.
When will this be fixed ? Not interested in iCloud or IMAP solution.
Then you won't be syncing your notes anymore.
Contacts and Calendars are the only things they restored.
iOS: How to transfer or sync content to your computehttp://support.apple.com/kb/HT1296

N9 not detected via USB connection

Since last few months I have observed that my Nokia N9 is not detected via any PC if connected via USB cable. The USB cable is OK because my other devices are easily detected through same cable. Can anyone suggest solution. I have already try to "Clear device" under settings->Reset.
Please help.

@girishpadia
Presumably your N9 still charges when connected to PC USB?
Does this apply to both Nokia Suite and Mass Storage mode presupposing that Nokia Suite is installed upon PC?
Happy to have helped forum with a Support Ratio = 42.5

New Officejet Pro 6830 will not print via USB connection. It scans great to PC. It copies.

New HP Officejet Pro 6830 for user to have local USB printer/scanner at desk. User runs win 7 64 bit on a network. Raninstall through setup.exe. Followed steps, connected printer via USB when it said to and it detected it and finished install.You can use HP Scan software and it scans to the PC perfectly. It will not print from any application or even a testpage from the Printer Properties page. If you go to the maintenance application it will print status and test page. If you run HP Scan and Print doctor it does it's thing, gives all Green Check marks and lets you print a test page fine, but it stillwill not print even a test page from the printer properties page (start/Devices and Pritners/right click on Officejet Pro 6830, select Printer Properties for Officejet Pro 6830 (not the Fax 6830), and click print test page. It does not seethe printer. It is a networked PC and has network defined HP network printers as well but user wanted a printer/scanner at his desk. I actually took the unit and connected to my laptop which is same win 7 64 bit platform and it does the same thing. I disable the virus protection to do the install so that is not an issue. It clearly sees and installs the printer, andlike I said the HP Scan works fine so it is connected via the USB to the PC, but it will not print. I have tried to install from the CD, and removed device and tried to install from the new downloaded drivers as well and it just does not want to print.I have conected to different USB ports, and like I said actually tried it on a different PC and had same results. Guidance certainly would be appreciated.

Hi , I see by your post that you can scan, but are unable to print over the USB connection. I would be happy to help you.
I have provided a document for setting Security permissions for printing to see if that will help. If the issue persists, reinstall the printer on the Administrator Account to see if you have the same results.Unlock Hidden Administrator Account and install the printer on this account: Go to your Start menu and under the 'search programs and files' box type CMD. CMD will populate as a search option above, just right click on it and 'run as administrator'. Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter. Next, close CMD and restart your computer. When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it. If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.Under the Administrator account, install the printer software. Test the printer. To turn off the Admin account start back at step 1 and type in net user administrator /active:no.Please let me know the outcome. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

Printer not working via usb connection to airport time capsule

I bought an airport time capsule 3 TB, and I wanted to connect my multifunctional printer-scaner "canon i-sensys MF4350d" via usb to my airport device.However, I found a problem. Although my printer working properly in direct connection via usb,not working when connected via usb to my airport time capsule. when I chose printer In nearby printer list this error apeared:"the software for this printer is currently unavailable please contact the manufacturer for latest version" when I chose add printer and chose the printer model this error apeared:"the printer information has not been acquired"
devices:
printer: canon i-sensys MF4350d
air port time capsule 3 TB
macbook pro me664
osx mountain lion 10.8.5 (latest version)
printer software:canon UFR II ver 2.43(latest version for my printer)

Login to airport utility via Mac or windows pc. Look under connected usb devices and it should say your manufacturer for the printer. If not try rebooting both printer and router with them being plugged in or try different usb cable or port on printer.

Personal Hotspot on iPhone 4s not working via USB cable

In the last couple of weeks, I have not been able to use the Personal Hotspot on my iPhone 4s via the USB/sync cable to either of two 2011 Macs, both running the latest version of Lion, with all relevant software updated, including Flashback removal & Java updates. The connection via Bluetooth & wi-fi is unaffected.
Opening the Network System Preference pane, the connection is shown as iPhone USB, but it is not connected, even with all other internet access methods either deactivated or disconnected.
This issue is related to Lion, as the G4 & G5 PPC Macs running 10.5.8 which I either use or administer are not affected by this problem. The iPhone is running on iOS 5.1 and is not jailbroken.
Is it possible that the Flashback/Java issues and Apple's interpretation of their prevention/removal has affected this aspect of internet access via Personal Hotspot?

Hey, where did that "I have this problem too" link come from?
I have this problem too.

E72 - Calendar not syncing via USB data cable (Out...

PROBLEM:
Syncing the E72-2 Calendar to Outlook over USB Data cable returned synchronization errors.
HISTORY:
Previously was using MfE and Google Calendar as a go-between from Outlook 2003 to my E72. It worked OK for a couple of weeks, but then turned to **** (appointments disappearing from phone, duplicates that couldn't be deleted, sending tons of 'decline' messages to work colleagues from my personal Gmail account...etc. etc.) It is abundantly clear that MfE and Google Calendar were not meant to play together at this point in time.
Next strategy was to use PC Suite to sync with the Outlook calendar directly via cable. This was not successful either. The default Sync profile on the phone only offers Data Bearer of Bluetooth or GPRS, no cable. Sure enough, PC Suite would fail immediately with 0 events synced, saying to check the Idle status of the phone.
SOLUTION that worked for me:
Overview:
- Delete all calendar entries on the phone, even those that are 'stuck'. (Note: you DON'T need to wipe your phone for this - that is Nokia's lazy solution but there are easier ways.)
- Run PC Suite Cleaner from Nokia
- Reinstall PC Suite
- Run PC Suite, connect the phone via USB only when prompted
- Configure the Sync profile on the phone
- Configure the Sync application on the PC
- Sync!
Details:
0a. Clean off all calendar entries from the phone. To get rid of stubborn ones, you can try to sync the phone via bluetooth or internet to an empty Google or other calendar to remove all entries. (I did this by syncing to an empty iCal calendar on my Mac) Alternatively, you can also connect the phone to PC Suite, then open the phone calendar in PC Suite and delete all appointments using the trash can button. (Recurring series will only need to be deleted once.)
0b. Exit PC Suite. Ensure it is not still running in the Taskbar.
1. Run the Nokia PC Suite Cleaner, downloadable from Nokia's support site. Restart when prompted.
2. Re-install PC Suite version 7.1.40.6
3. Run PC Suite before connecting the phone.
3a. Select Cable connection, then connect the phone when prompted.
3b. PC Suite should install the necessary drivers and software (if this is working, you will see several USB device popups in your taskbar.)
4. On the phone, go to Ctrl Panel --> Phone --> Sync.
4a. If you have been messing around with MfE or other sync methods, delete those extraneous sync profiles from the phone. Go to "Change Active Profile" - if you see anything besides 'PC Suite', select it and then choose 'Delete' from the Options menu.
4b. After any extra Sync profiles are gone, the phone will default back to 'PC Suite.' Ensure the PIM data you wish to sync (Calendar, etc.) is selected with a red X.
4c. It does not seem to matter what you select for Data Bearer - I am using Bluetooth and that's working even though the target PC does not have it.
4d. 'Allow sync requests' should be set to 'Automatically accept'
4e. For 'Synchronization type' select the value that works for you. ('To phone only')
5. Run the Sync application in PC Suite.
5b. Ensure the phone has not automatically locked itself.
5c. Click the 'Sync' button in the PC Sync app.
5d. You should see Connecting....Waiting....Reading.....etc. while the content is syncing.
5e. If it stops after Waiting and returns a communication error, you may need to try the above steps again, and/or do a clean install on your phone. :-(
Hope this helps someone out there. Note that this is mostly from memory, so if I inadvertently skipped any steps or if anything needs further clarification, please respond to this thread to help future readers.

Herve55 I can confirm that the DC-6 (remember to buy the the one with USB-micro connection) works.
However the only reason for me wanting to use the supplied USB to USB-micro cable in the car (with 3rd party cigarette adapter) was to first, get rid of that annoying spiral cord and second to have the data cable with me at all times.
Sad to say that I´eve by now definitely tried all possible solutions for the data cable "CA-101" without any luck.
My N97 witch I was very satisfied with at start started to burn battery,reboot,loose memory, become sluggish and then after 8 months of aggravation i sent it on a flyer in the wall.
I have now after 15 years changed brand.
Conclusively the guys at Nokia seems to carry to many models for any possibility of making further great phones! in other words they´v gone sloppy.

My iPad 1 will not communicate via USB to my Mac or PC

When I connect to my Mac, nothing appears in finder and nothing appears in iTunes
When I connect to my PC(win 7), it gives a little tone (same as all peripherals connected via USB), but it is not recognized and nothing appears in the explorer.
Here's what I've already tried:
- rebooting iPad
- restarting Mac
- restarting PC
- "troubleshooting" the unknown device in the control panel of PC
- factory restoring iPad (and then restored it from iCloud backup)
- tested the USB cable
Any other suggestions? Other than this the iPad is working fine.

Hi there,
It sounds like you have tried a few troubleshooting steps, but you may still find the article below helpful.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
-Griff W.

NexStar LX External Drive not mounting via USB 2.0

I've got a Vantec NexStar LX NAS with a 320GB Seagate hard drive. Up until now, it's been working fine. I've managed to connect to it via ethernet and/or directly via USB 2.0 from my iMac G5 Powermac.
But recently, the drive no longer mounts when connected via USB. Ethernet still works ok. It doesn't show up in Disk Utility or System Profiler. In fact, both those utilities just keep 'spinning' when the drive is connected, unable to pull up any info on it.
I then connected the drive to my xbox 360 via usb and that worked fine, so I've ruled out a faulty usb cable and usb port on the NAS. I've tried all the usb ports on my imac, and the drive still doesn't mount on either of them.
Any help would be appreciated!

I do not have a miniStack, but intend to purchase one later this month for my new Mac mini. I have read much about them.
My questions about the hub are not related to whether the thing mounts or not. I am trying to determine if perhaps you have a completely faulty miniStack and Newertech should replace it. Please go to Apps>Utilities>System Profiler and see if the USB hub built into the miniStack shows up as a USB hub under the USB pane in the Hardware section when both FW and USB are attached and when only USB is attached.
BTW, which miniStack is this v2, v2.5 or v3.

IPOD WILL NOT WORK VIA USB WITH MY HOME TEATHRE

When I plug my iPod to my stereo via USB that came with iPod, stereo says no USB device connected and then after few seconds, it starts playing, although, iPod displays same screen as when synching with the Do Not Disconnect logo and cannot stop it from playing and when I disconnect it, I can't turn it off. This also happens occasionally, that I cannot turn it off.
Any help would be appreciate it.
You can also contact me at carlos_brewer (at) yahoo (dot) com

Darkmonster620 wrote:
It says it'll work with "all" iPods...
When was the manual written? What constituted "all iPods" one year would not necessarily apply to iPods made later.
Throw away my iPod and get a new one?
I don't believe I suggested anything like that.
You might get better answers if you included the exact make and model of the home theatre system. You should also search the forums using the "Search Discussions" box to see if there are any other threads about your particular brand of home theatre. Also, did you ever check the support site or contact customer support for the home theatre and car stereo?
Best of luck.

Ipad 1 suddenly does not appear in iTunes and down not load via usb

All of a sudden my ipad1 is not recognised by itunes.
Also no loading activity via usb.
I use Imac with lion.
My ipad3 runs prefectly.

Try something very simple .... quit iTunes, reboot the iPad and then restart the Mac and try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

IPhone not charging via USB

I just got this weird problem today. I have a 2G iPhone running 2.2
1. iPhone is not charging with the USB cable to my MacBook and not recognizing by iTunes, thus I can't sync anymore.
2. I can use the same USB cable to charge the iTouch from my MacBook
3. I can use the same USB vable to charge the iPhone charges via the wall adapter, so this can not be the USB cable.
4. I can use the same USB cable for the iTouch and I see it in iTunes
So, this is not the USB cable nor iTunes. However, if this is hardware issue with the iPhone with charging, how come I can charge it using the wall adapter??
This is very very strange indeed. Would it help if I do a hard reset on the phone? If so, how do I do that as I can not find anything on hard reset in the manual.
help!

I have two USB cables, one for the iPhone and one for the iTouch. Both cables do not work for the iPhone but they work for the iTouch.
Also, I can use both cables to charge the iPhone from the wall charger. My problem is the iPhone does not seem to charge with the same cable plugging into my MacBook and iTunes does not see the device.
My last sync with iTunes was yesterday. This problem just started today. I did a hard reset on the iPhone, no luck.

IPOD not recognized via USB - A lot of trouble shooting already done.

I got a new 80GB iPOD to replace the 4th gen 40GB that just died (HDD issue). I cannot get the computer to recognize it via USB. I had the same problem with my 40GB via USB, however it would usually work via firewire. This new one will not let me use firewire, so I am forced to try to resolve the issue. I know this has come up before on here and I spent about 3 hours last night going through old 'USB Device Not Recognized' posts, but could never find anything similar. This is where I stand. Any help would REALLY be appreciated, because I am pulling my hair out over this.
All previous Itunes have been deleted and Itunes 7 has been installed. This is on WIndows XP Pro.
1. I know it is not a defective IPOD or USB cable because I brought them to work (a non Itunes machine) and plugged it up. IPOD was immediately recognized as IPOD /USB Mass Storage Device.
2. I know it is not the USB port at home because I plugged other devices (Klipsch Promedia speakers / Mouse / Keyboard) into the same port and they worked. Incidentally, this is a front USB port, however, I get the same result if I use a rear port.
3. It is not recognized in Itunes or in 'My Computer'. Only recognized as 'unknown device' in Device manager.
When I plug it up at home, it goes through all the 'new hardware detected' crap and then 'you new hardware is ready to use', but then after about 3 seconds, I get the 'USB Device Not Recognized....USB device has malfunctioned ....'. message. If I go to device manager and uninstall it and then retry. I get the same thing. Even f I reboot between tries.
So, I have pretty much ruled out a hardware problem. I think I read on here somewhere (or a link from Apple) that there was a Microsoft hotfix issued for this issue last year sometime (I think it was a SP2 compatability issue), however, I cannot find the fix. The link I had talks about the hotfix, but there is no file. Also, since the issue first appeared last year, I would think it has been resolved in one of the updates since then.
PLEASE help me out if you can. Thanks!

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Ipad 2 not charging via USB after IOS 7 update

I have recently update my i Pad 2 to IOS 7.
The update has completed sucessfully with no issues but I have now found that the iPad nolonger charges via USB. When plugging in the 30 pin cable the chargin icon flashes and then switches to not charging. If I plug in the AC charger it all works fine.
The cable that I am using is the original cable, I have read in the forums that there is some issues with IOS 7 and uncertified cables. Is the original Apple 30 pin connector uncertified ?
Thanks in advance.

Normally, they don't. There are some out there that do have enough power to charge a full sized iPad.
It is very possible that whatever they did to the firmware to make it detect different cables could have affected how it charges. I know prior to 2011 the ipad used to send more power to the port which allowed people to plug in keyboards etc, but a 2011 update changed that, so it's not unprecedented.
Have you tried to give your iPad a reset? Sometimes if that port has issues it 'turnes off' and it takes a reset to turn it back on. Hold down the sleep and home keys until it reboots. Try again and see if that helps.
Other than that, if Apple has decided to change the configuration there's not much users can do but alter their behavior to fit in with what the device allows.

M9 not working via USB connection.

From the card directly onto the macbookpro it recognises only the camera not the lens in the metadata. Nothing via the USB connection. Does anyone know if we are still waiting for an update to Aperture for this? If so that's ok, I'd just like to use Aperture rather than Lightroom.
Thanks.

Login to airport utility via Mac or windows pc. Look under connected usb devices and it should say your manufacturer for the printer. If not try rebooting both printer and router with them being plugged in or try different usb cable or port on printer.

E90 not connecting via USB connection

Similar Messages

Maybe you are looking for