E90 PC Suite starts synchronizing after BT connect...

I don't know what I did wrong but since a few days the PC Suite on my E90 starts synchronizing after a BT connection with my carkit was established. This makes that my phone disconnects from my carkit. Restarting my phone and carkit makes the whole story start again. Who knows how to get ris of this problem ? I already set my E90 back to factory settings but that didn'n work.
Job

Hi jodo,
What is the car kit and firmware being used?
Was this problem (BT disconnecting from carkit) being faced after firware update?
If so please jointhe discussion at /discussions/board/message?board.id=connectivity&message.id=22459#M22459
- Vijay T
If this post helped... Add some kudos!!

Similar Messages

My ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. I do?

please help me my ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. what I do?

Hey saintbless,
Thanks for the question. The following article outlines troubleshooting information for iPod nano. While it mostly refers to the 6th generation, most steps apply for your model as well:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Will not turn on or screen remains dark
- Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
- If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
- If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
- If the screen remains dark and will not turn on, then your iPod may need service.
Thanks,
Matt M.

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: angana

You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

PC Suite not starting automatically after re-boot.

Running the latest version of PC Suite in 32bit Vista. Every time I re-boot my PC, PC Suite refuses to start automatically, and there is no icon in the tray. I have to go into start, programs, etc..,then 'click to connect a phone' every time. Very annoying!
Very strange behaviour, given the fact that my laptop (running XP Pro), starts up with PC suite in the tray and connects with my phone via bluetooth without any intervention whatsoever.
Anyone experienced or solved this problem?
Jimmy.

In the start up tab of system config, there is no 'launch application' listed. However, PC suite is listed and enabled.
An update on this problem: Having looked at various previous posts, it would appear that ATI Catalyst Control Centre conflicts with the start-up of PC Suite. I have uninstalled this app, and all would now seem to be well. I beleive ATI CCC causes quite a few problems with Nokia software judging by problems other posters are having..
Jimmy.

Jvedeloper 11gR1 not starting anymore after SOA suite 11g Install

I have/had a working setup on my Server 2008.
Weblogic 10.3
MDM 2.0
OUAF 4.2
Jdeveloper 11g
Oracle DB 11g
Now for some testing I needed to install SOA Suite 11g. After done so Jdeveloper lets me choose the role but then never comes up. I see it in the task manager.
I assume SOA suite must have overridden some file that it needed.
Any ideas how I could get this back to working state?
Thank you,
Steve

11g which version..?? did u wait and see if it comes up.. which Os you are using.. usually the splash screen wont come up.. but the ide will popup after sometime..
chk this as well
Jdeveloper doesn't start after Weblogic upgrade.

IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

What does any of this have to do with the Apple TV?

When I launch iTunes on the PC, iTunes will not connect to Airplay speakers. Only after a new start of iTunes a connection is established.

When I launch iTunes on the PC, iTunes will not connect to Airplay speakers. Only after a new start of iTunes a connection is established.

Thank you for the suggestion, but the 'clean' install of iTunes (which I did twice) didn't do the trick.
Anybody else have a clue?
I spoke with Apple Care, who was also stumped. They think it might be a hardware issue (but were probably just giving up on working with me because it was free service/I haven't paid the $50). Still seems awfully coincidental that my Airport (1st Gen - about 4 years old) would stop being able to stream music through iTunes simultaneously with the iTunes update...

HT1766 sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant

sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant restore... please help me...

See Here...
iOS: Not responding or does not turn on
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430

TS1286 My screen had a black out and since then, my ipod touch is not getting started. it just shows ' connect ipod to itunes'. Even after doing that, my Itouch doesn't appear anywhere in Itunes. Help !! ??

My screen had a black out and since then, my ipod touch is not getting started. it just shows ' connect ipod to itunes'. Even after doing that, my Itouch doesn't appear anywhere in Itunes. Help !! ??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Re started iphone after powering down, now is stuck in connect to itunes mode and wont do anything else. also has no service

re started iphone after powering down, now is stuck in connect to itunes mode and wont do anything else. also has no service, I was able to retrieve all of my photos so the device is functional on that level. have restarted several times & also have restored data from i tunes. it said my phone is damaged.

Jailbreaking
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

settings - general - reset - reset network settings.

PC Suite - no USB and Serial Connection Type avail...

I have been trying to solve this problem for days now. I have Windows XP and Nokia 5310. After I installed Nokia PC Suite, there is no USB or Serial connection type in the Connection Manager; it only has Blue Tooth and Infrared conection available. I have install and uninstalled PC suite and used PC Suite Cleaner to clean the installation. I also went into the add and remove program in the control panel and click on "change" to fix the Nokia Connection Manager and Nokia Connectivity Cable Driver. It still didn't work. The thing is that the first time when installed PC Suite on my laptop, it did have USB connection option. Later after uninstalled PC Suite and reinstalled it, it start to have this problem. I am extremly frustrated. Can anyone help please?

Thanks for your reply. I have solved the problem by following your instruction below:
Go to Start --> Settings --> Control Panel --> Software, there you need to uninstall all Nokia software (Nokia PC Suite, Nokia Cable driver, PC Connectivity Solution ...)
Download and run Nokia PC Suite Cleaner
Reboot your computer
Download and install PC Suite here.
Connect your phone via USB cable (if possible use a different USB jack) and follow the instructions on the screen.
Maybe when I uninstalled Chinese version of PC suite, the order in which it was uninstalled was not the one you suggested above. So，I followed your instruction and uninstall order to uninstall PC Suite again. I also uninstalled all the antivirus, spyware, and firewall before I reinstall the PC Suite. It worked; then, I reinstalled all the other security software again after I had reinstalled the PC Suite. Although it worked, I still didn't know what exactly cause the problem the first place, PC Suite version, Security protection software, or the order which it was uninstalled? All it matters is it's working.

PC Suite not wokring after installing OVI

I recently installed the OVI Suite, but decided that don't need the OVI Player, so I unistalled it. But even after uninstalling the player, the rest of the suite is still there and seems to conflict with PC Suite. So now I have a double connection to my N97: when I look in Windows Explorer, I see both Nokia N97 as a mobile media player, and Nokia Phone Browser as a system folder. Both can connect to the phone - but PC Suite is greyed down and does not seem to be connected to the phone.
Is this how it should be? Or which components should I uninstall to get the functionality of PC Suite back?

Hi,
As far as i know, there is nothing harm in installing both Nokia Ovi Suite & PC Suite on your PC
After uninstalling your OVI Suite have you rebooted your PC? If not, what i suggest you is,
Take backup of your PC registries.
Uninstall Nokia PC Suite also from your PC, Run PC Suite cleaner(www.nokia.com/pcsuite it will have cleaner also), Run reliable Cleaner for your PC, Uninstall NOkia Connecitivity cable driver, PC Connectivity Solution etc., Install Nokia PC Suite from above link, reboot the pc after suite got installed, Once pc is started, Open Nokia PC Suite and then try to connect your Phone in different USB ports of your PC.

SQL2012 SP2 CU1 Availability Group database not synchronizing after applying February Microsoft patches

Hi,
We are starting our monthly patching and have a situation with SQL2012 SP2 CU1 Availability Groups databases not synchronizing after patching the secondary replica. This seems a little like
http://support2.microsoft.com/kb/3033492/en-us which was for CU3 and CU4 builds. The dashboard on the Primary shows the secondary as not synchronizing. The errorlogs on both nodes show the connection
has recovered but the dashboard shows critical errors. This is running on Windows 2012.
Thanks
Chris

Lydia,
I am referring to MS15-009 to MS15-017 that came out on Tuesday. These are the only patches we have applied. On our two node Availability Group setup we had the patches applied to the secondary node and then it was restarted. It came up fine and SQL is running
as expected.
This is from the primary node errorlog:-
AlwaysOn Availability Groups connection with secondary database terminated for primary database 'XXX_DEVL' on the availability replica with Replica ID: {e6468c4d-9431-4052-88c0-07d3b3eb428c}. This is an informational message only. No user action is required.
A connection for availability group 'YYYYY50_AG' from availability replica 'YYYYY50AV' with id [0E53235A-0FBB-4E18-8C40-A0D72F30C36A] to 'YYYYY50BV' with id [E6468C4D-9431-4052-88C0-07D3B3EB428C] has been successfully established. This is an
informational message only. No user action is required.
AlwaysOn Availability Groups connection with secondary database established for primary database 'XXX_DEVL' on the availability replica with Replica ID: {e6468c4d-9431-4052-88c0-07d3b3eb428c}. This is an informational message only. No user action is required.
On the secondary node errorlog:-
Skipping the default startup of database 'XXX_DEVL' because the database belongs to an availability group (Group ID: 65541). The database will be started by the availability group. This is an informational message only. No user action is required.
The state of the local availability replica in availability group 'YYYYY50_AG' has changed from 'RESOLVING_NORMAL' to 'SECONDARY_NORMAL'. The replica state changed because of either a startup, a failover, a communication issue, or a cluster error. For more
information, see the availability group dashboard, SQL Server error log, Windows Server Failover Cluster management console or Windows Server Failover Cluster log.
AlwaysOn Availability Groups data movement for database 'XXX_DEVL' has been suspended for the following reason: "system" (Source ID 5; Source string: 'SUSPEND_FROM_RESTART'). To resume data movement on the database, you will need to resume the
database manually. For information about how to resume an availability database, see SQL Server Books Online.
Nonqualified transactions are being rolled back in database XXX_DEVL for an AlwaysOn Availability Groups state change. Estimated rollback completion: 100%. This is an informational message only. No user action is required.
AlwaysOn Availability Groups connection with primary database terminated for secondary database 'XXX_DEVL' on the availability replica with Replica ID: {0e53235a-0fbb-4e18-8c40-a0d72f30c36a}. This is an informational message only. No user action is required.
Now I see the suspend message. Running the select on sys.dm_exec_requests there are NO DB_STARTUP ones on either node or blocking.
Next action is probably to have the patches removed from the secondary node and see if all is well and then try patch one by one to see which one causes the issue.
Chris

SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent

Dear all,
i have a Windows 2008 Server (X64) with SQL 2005 SP3 and some troubels...
The SQL works since some week, this week we installed SQL SP3 and change of the local Admin password.
Yesterday we reboot the Server, now the SQL Server Agent is unable to start!
The SQL Server is up and running,
Errorlog:
2009-11-06 09:49:52.56 Server      Microsoft SQL Server 2005 - 9.00.4035.00 (X64)
Nov 24 2008 16:17:31
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.0 (Build 6002: Service Pack 2)
2009-11-06 09:49:52.56 Server      (c) 2005 Microsoft Corporation.
2009-11-06 09:49:52.56 Server      All rights reserved.
2009-11-06 09:49:52.56 Server      Server process ID is 5912.
2009-11-06 09:49:52.56 Server      Authentication mode is WINDOWS-ONLY.
2009-11-06 09:49:52.56 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2009-11-06 09:49:52.56 Server      This instance of SQL Server last reported using a process ID of 4424 at 11/6/2009 9:43:23 AM (local) 11/6/2009 8:43:23 AM (UTC). This is an informational message only; no user action is required.
2009-11-06 09:49:52.56 Server      Registry startup parameters:
2009-11-06 09:49:52.56 Server      -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2009-11-06 09:49:52.56 Server      -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2009-11-06 09:49:52.56 Server      -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2009-11-06 09:49:52.59 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2009-11-06 09:49:52.59 Server      Detected 4 CPUs. This is an informational message; no user action is required.
2009-11-06 09:49:52.67 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2009-11-06 09:49:52.71 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server      Database mirroring has been enabled on this instance of SQL Server.
2009-11-06 09:49:53.73 spid4s      Starting up database 'master'.
2009-11-06 09:49:53.86 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2009-11-06 09:49:53.95 spid4s      SQL Trace ID 1 was started by login "sa".
2009-11-06 09:49:53.97 spid4s      Starting up database 'mssqlsystemresource'.
2009-11-06 09:49:53.99 spid4s      The resource database build version is 9.00.4035. This is an informational message only. No user action is required.
2009-11-06 09:49:54.16 spid9s      Starting up database 'model'.
2009-11-06 09:49:54.17 spid4s      Server name is 'VIE-EU-ARC-02'. This is an informational message only. No user action is required.
2009-11-06 09:49:54.19 Server      The certificate was successfully loaded for encryption.
2009-11-06 09:49:54.19 Server      Server is listening on [ 'any' <ipv6> 1433].
2009-11-06 09:49:54.19 Server      Server is listening on [ 'any' <ipv4> 1433].
2009-11-06 09:49:54.19 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
2009-11-06 09:49:54.19 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-11-06 09:49:54.19 Server      Server is listening on [ ::1 <ipv6> 1434].
2009-11-06 09:49:54.19 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2009-11-06 09:49:54.19 Server      Dedicated admin connection support was established for listening locally on port 1434.
2009-11-06 09:49:54.31 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2009-11-06 09:49:54.33 spid15s     Starting up database 'AdventureWorks'.
2009-11-06 09:49:54.33 spid16s     Starting up database 'EnterpriseVaultDirectory'.
2009-11-06 09:49:54.33 spid14s     Starting up database 'Test'.
2009-11-06 09:49:54.33 spid12s     Starting up database 'AdventureWorksDW'.
2009-11-06 09:49:54.33 spid17s     Starting up database 'EnterpriseVaultMonitoring'.
2009-11-06 09:49:54.33 spid13s     Starting up database 'msdb'.
2009-11-06 09:49:54.33 spid23s     Starting up database 'EVVSExchangeVaultStore_2'.
2009-11-06 09:49:54.33 spid22s     Starting up database 'EVVSGVIE_2_2'.
2009-11-06 09:49:54.33 spid24s     Starting up database 'EVVSJournalVaultStore_3'.
2009-11-06 09:49:54.33 spid19s     Starting up database 'EVVSVIEIT_1'.
2009-11-06 09:49:54.33 spid21s     Starting up database 'ReportServerTempDB'.
2009-11-06 09:49:54.33 spid20s     Starting up database 'ReportServer'.
2009-11-06 09:49:54.33 spid18s     Starting up database 'EVVSGVIEIT_1_1'.
2009-11-06 09:49:54.56 spid9s      Clearing tempdb database.
2009-11-06 09:49:54.61 spid19s     CHECKDB for database 'EVVSVIEIT_1' finished without errors on 2009-10-28 18:06:14.107 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.65 spid23s     CHECKDB for database 'EVVSExchangeVaultStore_2' finished without errors on 2009-11-04 18:05:33.960 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.71 spid24s     CHECKDB for database 'EVVSJournalVaultStore_3' finished without errors on 2009-11-04 18:05:51.793 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.75 spid16s     CHECKDB for database 'EnterpriseVaultDirectory' finished without errors on 2009-11-04 18:06:38.103 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.83 spid17s     CHECKDB for database 'EnterpriseVaultMonitoring' finished without errors on 2009-11-04 18:06:18.570 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.99 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2009-11-06 09:49:55.55 spid9s      Starting up database 'tempdb'.
2009-11-06 09:49:55.68 spid4s      Recovery is complete. This is an informational message only. No user action is required.
2009-11-06 09:49:55.68 spid12s     The Service Broker protocol transport is disabled or not configured.
2009-11-06 09:49:55.68 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2009-11-06 09:49:55.72 spid12s     Service Broker manager has started.
Only the SQL Server Agent is unable to start,
Eventlog:
Log Name:      Application
Source:        SQLSERVERAGENT
Date:          06.11.2009 10:09:52
Event ID:      103
Task Category: Service Control
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      vie-eu-arc-02.global.domain
Description:
SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SQLSERVERAGENT" />
    <EventID Qualifiers="16384">103</EventID>
    <Level>2</Level>
    <Task>2</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-11-06T09:09:52.000Z" />
    <EventRecordID>8486</EventRecordID>
    <Channel>Application</Channel>
    <Computer>vie-eu-arc-02.global.domain</Computer>
    <Security />
</System>
<EventData>
    <Data>Unable to connect to server '(local)'; SQLServerAgent cannot start</Data>
</EventData>
</Event>
SQLAgent.out Logfile:
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
2009-11-06 10:09:53 - ? [098] SQLServerAgent terminated (normally)
Additional the SQL Server Management Studio is unable to logon to the Server:
TITLE: Connect to Server
Cannot connect to vie-eu-arc-02.
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
The local Admin Password was reset to the "original" (after install) one.
Any ideas how to fix the problem?

Dear all,
the encryption was NO on all protocols.
Because no additional ideas available, i uninstalled the SQL Server on friday.
At the Re-Install Process i got again an error:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
The install process failed.
On google i found the same problem in an other thread:
http://groups.google.com/group/microsoft.public.sqlserver.connect/browse_thread/thread/dbec4a9a271f69a6/7cd22694da3a6062?lnk=st&q=%22Shared+Memory+Provider%3A+No+process+is+on+the+other+end+of+the+pipe%22&rnum=2&hl=en#7cd22694da3a6062
++++++
During the installation process of SQL Server 2005, Setup complains it cannot
connect to the database service for server configuration. The error was:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
I have checked that the pipe exists (\\.\pipe\SQLLocal\MyInstance), but
everytime the installer attempts the connecting the pipe is closed by the
server and another is reopened. That's why the Client says there is no
process on the other end of the pipe.
I have re-installed 'everything', tried connections via TCP, but nothing
works.
I have made a small application to connect to the pipe and noticed that
there are 3 instances of the pipe running, one that I am connecting to, and 2
listening pipes. If I write to 'my' pipe SQL server disconnects the pipe and
reopens another too. The difference is that SQL server writes an error
message in the log file. No such luck when the Native client is doing the
same.
What more can I do?
++++++
and an answer
++++++
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I renamed it to another name and re-installed sql server.
I noticed that sql server ERRORLOG complained about certificate that it
couldn't load and the generation of a self-generaed certificate (see below)
"2005-12-10 21:01:02.30 Server The server could not load the
certificate it needs to initiate an SSL connection. It returned the following
error: 0x8009030d. Check certificates to make sure they are valid.
2005-12-10 21:01:02.49 Server A self-generated certificate was
successfully loaded for encryption."
Now the installation succeeded
++++++
With Windows 2008 it was really a challange to get access to this folder (!!!)
After clearing the folder the ReInstall of SQL Server works fine.
Now the SQL Server & the SQL Server Agent works again.
The problem was anything with encryption, old certs & files.
I don't think that everyone can afford reinstalling SQL server.
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I think this is what the following blog was saying , a problem with certification
http://blogs.msdn.com/sql_protocols/archive/2006/07/26/678596.aspx
Cheers
Please mark as answer if you think this answers your questions

E90 PC Suite starts synchronizing after BT connect...

Similar Messages

Maybe you are looking for