E90 problem compatibty between E90 PC suite 6.84 a...

Impossible to use my E90 like modem with bluetooth connection for my Sony Vaio TX5
Connection PC suite with Toshiba drivers from my Sony Viao is not compatible.
I tried to delete Toshiba drivers on my Sony. Then I tried to install Microsoft drivers but impossible to find them on my Vaio
Do you have solution?

I also have E90 and a Sony Vaio, and the bluetooth / modem connection works perfectly. But I do not use PC Suite.
I Have only installed a generic Bluetooth modem with E90, and I have put in "Advanced modem setings" the extra initialization command for GPRS/3G. If needed, I can give you more detailed instructions. Good luck.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

Similar Messages

Problem with Windows Vista, PC Suite and E90

PC Config:
SO: Microsoft Windows Vista Business TabletPC (ENG Language)(with all the Updates for the SO).
Nokia: PC Suite 6.84.10.3
Phone: Nokia E90 Comunicator with firmware V07.24.0.3 -12/06/07 - Nokia E90-42
After installing the PC Suite and establish the communications if I check the Event Viewer I will find a large set of error messages marked as critical.
The error text is the following:
..................Start_error......................
The device E90 (location 353659010805204) is offline due to a user-mode driver crash.
Windows will attempt to restart the device (till 5 times) more times.
Please contact the device manufacturer for more information about this problem
The source is: DriverFrameworks-UserMode
.................end_error.........................
Does anyone know more about this?
Thanks

the window7 is stil new whait for the server pack to solev it
phones i have 2730c - C1
KUDOS ME IF YOU FIND MY ANSWERS HELP FULL

I have a problem when installing the Developer Suite

Hello,
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
Please help me with this :(

Hi user;
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
Regard
Helios

Difference between Oracle developer suite 9i and 6i

Hi -
Can I know what's the release difference between oracle developer suite 9i and 6i , and what's new in oracle discoverer 9i in compare with last version , we have discoverer version of 4.1...
I could not able to get from metalink anything like new features in 9i deve;oper suite.
Existing oracle financial application 11.5.8 have their forms and reports in 6i version.
What impact will have if changed with new version of application 11.5.10 in future .

Oracle Developer Suite 9i is now called Oracle 9iDS. Oracle also sells Oracle 9iAS. You need to license iAS in order to run application created using iDS.
9i is fully J2EE compliant. It offers improved integration between components. Its much more feature rich than 6i. See:
http://www.oracle.com/ip/develop/ids/
for more information.
what's new in oracle discoverer 9i in compare with last versionThis question is best asked in Discoverer Forum.
What impact will have if changed with new version of application 11.5.10 in future Reports offers backward compatibility between 6i and 9i reports with a few exceptions. See Oracle Reports Obsolescence plan on OTN:
http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/movingto9i.pdf
Regards
Sripathy

Problem in using nokia pc suit

hi,
i m purchasing new dell inspiron laptops on windows based , and i m try to used to connect internet through my nokia 5230 handset. But problem is that, nokia pc suit not working
Notification "dignostic problem " and "modem not found"

to use you phone a bluetooth modem (only), you don't need to install pcsuite.
Pair your phone with pc/laptop.
Enable remote sim, let your phone always show itself other device(dicoverable).
Set you laptop as authorised in your phone so that it connect automaticaally (you don't need to click yes, yes......)
Pc should dectect generic serial port, generic bluetooth modem etc
Enable DUN in blutooth device property(pc)
Create a dailup connection.
In phone no field type*99#
Username and password-blank or call your operator if required.
Done
Click on dial

What is the difference between E-Business suite and people soft enterprise

hi every one
I want know what is the difference between E-Business suite and people soft enterprise

These are two different ERP systems - the former developed by Oracle and the latter by Peoplesoft (before it was acquired by Oracle).
http://www.oracle.com/us/products/applications/ebusiness/018714.htm
http://www.oracle.com/us/products/applications/peoplesoft-enterprise/018725.htm
HTH
Srini

Problem communicating between Asynchronous BPMN processes

Hello, I'm having problems communicating between two BPMN processes with an assynchronous interface.
I have a main BPMN process (process A) and inside I have a Send Task to invoke a second BPMN process (process B). Both processes are inside the same JDev project.
BPM Process B was created using the JDev wizard. I chose a asynchronous service and defined input and output variables. In the created process I verified the Start and End events (in the implementation tab) and both are defined corretcly. In the composite.xml Process B has 2 operations on the Exposed Services side (left side).
In Process A, inside the Send Task implementation tab I have selected:
Conversation Type: Initiates
Properties
- Implementation: Process Call
- Process: I can browse and select Process B
- Node: Nothing is shown on the LOV.
If instead of the Send Task I use a Service Task I can select the Node (Start node of Process B).
I am using versions 11.1.1.4 for both JDev and SOA/BPM.
Can you help me? Am I doing something wrong?
Thanks for your help.
Edited by: 861727 on 26/Mai/2011 9:12

Hi,
The send and receive tasks perform similar functionality to the throw and catch message events. However, you cannot use the send task to invoke a process that is initiated with a message start event.
http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15176/model_bus_procs_bpmpd.htm#CJAHBHII, id 6.4.3
Regards,
Diovani
Edited by: Diovani on 26/05/2011 14:50

Problem: No Synchronize since Ovi Suite 2.2.1.23 h...

Hello. I have a Problem: No Synchronize since Ovi Suite 2.2.1.23 has been installed.
The phone (XpressMusic 5800) is connected to the PC via Bluetooth or USB, I can enter to the messages / contacts / content etc. but no Synchronization can be made. Nothing happens even when I click on "Synchronize" on a part or "Synchronize All".
What can I do?
Thanks a lot in advance,
Lior.

Here's something worth trying:
Check if you have Contacts included in the Auto sync
* Tools > Options > Device Sync
* there is a check box under "Contacts".
* Uncheck the "Sync automatically ...."
* Click Ok
* Then from Menu "File" > Exit
Then start Ovi Suite again and try... any improvements?
Do you see in home the "Preparing to sync <contacts>" or any other indication that something might be happening?
Aki

SAP B67876125 problem with Nokia E90

Mercedes Benz SAP B67876125
Nokia E90 07.40.1.2
I recently replaced Nokia E60 with Nokia E90. Pairing and phone calls work fine. I have a problem downloading phone memory phonebook to the SAP B67876125 from Nokia E90. I can only see the SIM phonebook. This problem did not exist with the Nokia E60 which downloaded the phone memory phonebook with no trouble.
Any ideas?
Thanks.

Hello,
I think that your problem is because N900 is very new device and Parrot should/will make firmware update for MK9100
in case to be compatible with your new mobile.
I have Parrot 3200LS and after installing the newest firmware everything about conection with N900 is fine,
except this - I can only send contacts to Parrot one by one.
Regards.

E90 Problem sending text messages solved by partia...

After a couple of months with my Nokia E90 it stopped sending faxes but kept doing everything else. My provider (O2) suggested checking the settings, the message centre, resetting (not clear) and upgrading the software from Nokia's site. None of these worked.
As I am an O2 select customer, the phone was replaced (twice, thanks for trying O2), the second time with a brand new phone with the same problem. After restoring data from the last backup via pc for the second time, I still had the same problem. Was it the data? A phone virus?
The problem with the texts was eventually resolved by restoring everything except the settings to the phone. I still do not know what caused in the first place, but it I now have all my data, and can change the settings by hand.
Thanks to all at O2 for trying to help, I thought I would post this as when I tried to search for the problems online nothing came up.

OK a couple of months on, it's happened again and this time the partial restore doesn't work. I can't think that I'm doing anything unusual with this phone, so why do I have this problem?

E90 problem installing foreign language pack with ...

Hi everyone, I am unable to install the language pack which needed for the billingual dictionary to function with, my E90 already have 2 foreign languages including English.
Do I need to remove one of the other language that came with the device because it exceeds 3 or a 4th can also exist? Has anyone done this before or can offer some advice? thanks.

The pre-installed dictionary you are refering to is the simplified chinese dictionary.
I have tried looking for it in the entire nokia website and cant seem to find it anymore, however i found some in the download option on the phone
Its under the Download > Fun & Activity > MOT dictionary > there are a few languages for you to choose from.
However the files on the download may vary from country to country.
You may also try getting it from www.mosh.nokia.com
Thanks for the kudos..
Mark me a KUDOS if this has helped...

E90 problems

Hi,
I have two problems.
1. Cannot delete a Windows Live mailbox. I do not get a Delete option, only a message that tells me Feature is not supported. The mailbox works Ok but I want to remove it as I am using the phone for a work related Exchange mailbox and do not want any conflicts.
2. This may or not be related to 1 above. Stopped receiving emails about a week ago.Cannot even delete messages. Have backed up phone, reinstalled Nokia software updater and Symbian. Changed my Domain logon credentials on server and identical ones on phone. Checked all settings but I am still getting Credentials Incorrect error. Is this a matter for my Server Management team?
Many thanks,
Thomas

When I play a file on my pc, just at 9 seconds the resolution changes. Would this be because of a keyframe? Would this disturb realplayer? How can I fix this?
Update: I am pretty sure now that it is because of the 2nd keyframe? Because when I change the setting of when there should be a keyframe, the error time changes too.

Problem in Connecting to PC Suite

Phone - Nokia 6275 CDMA
Cable - Nokia CA-53
PC Suite - 6.83
PC OS - Win XP SP2
While trying to connect my phone to PC Suite through data cable, I get a USB device installation error message saying: "Service or service name already exists. USB device could not be installed".
The phone gets detected as the model no. shows in the taskbar. The phone is recognized properly under the "Data Storage" mode.I can even transfer files on to the memory card of the phone. However, the error message pops up every time on trying to connect to PC Suite by selecting the phone's "Nokia Mode". In Connection Manager, the port does not show.
I think it is some kind of a conflict between files or drivers on my PC because everything works just fine on another PC using Win XP SP2, PC Suite - 6.80.22.
Can somebody help?

Bottomline...6.83 has a serious problem when you istall it, and I spoke with a Nokia technical rep 2 days ago and he confirmed it. Unfortunately, Nokia doesn't have a clue to what is the root cause problem. The Nokia rep recommended that I "NOT" use version 6.83. Since they are having so many issues with it, I don't understand why they don't just remove it from their website? No matter what you try you will not get it to work properly!
Now when you try to uninstall 6.83, you also get into trouble. You can unistall the PC Suite 6.83 core application , but the cable driver portion remains. Now when you try to remove the cable driver, under ADD / REMOVE Programs, you get the following error" The feature you are trying to use is on a network resource that is unavailable". Again, the Nokia rep was clueless as to why I was receiving the error message and had no additional help for me in removing the cable driver. It just seemed no matter what I tried I could not remove the cable driver nor could I reinstall PC Suite either version 6.83 or 6.82. Finally, last night I stumbled upon a note from another digruntled nokia 6.83 user that led me to search the following Microsoft info regarding a little program called "Windows Installer Cleanup Utility".
My setup:
Phone - Nokia 9300
Cable - Nokia DKU-2
PC Suite - 6.83
PC OS - Win XP SP2
"THE FIX" for me:
1. Go to (ADD / Remove Programs) and uninstall PC Suite 6.83
2. Now go to the following MS website and download and Run the "Windows Installer Cleanup Utility".
(http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)
Once you download, go down to my item #3 below for further instructions!
Article ID : 290301
Last Review : November 13, 2006
Revision : 5.1
This article was previously published under Q290301
Warning The Windows Installer CleanUp Utility is provided "as is" to help resolve installation problems for programs that use Microsoft Windows Installer. If you use this utility, you may have to reinstall other programs. Caution is advised.
On This Page
SUMMARY
Microsoft has updated the Windows Installer CleanUp Utility. With the Windows Installer CleanUp Utility, you can remove a program's Windows Installer configuration information. You may want to remove the Windows Installer configuration information for your program if you experience installation (Setup) problems. For example, you may have to remove a program's Windows Installer configuration information if you have installation problems when you try to add (or remove) a component of your program that was not included when you first installed your program.
The Windows Installer CleanUp Utility does not perform the following functions: • Remove Windows Installer
• Remove files of any programs that are installed by Windows Installer, such as Microsoft Office 2003
The Windows Installer CleanUp Utility does perform the following functions: • Provides a dialog box in which you can select one or more programs that were installed by Windows Installer
To do this, select the programs that you want in the Installed Products list in the Windows Installer CleanUp dialog box. After you make this selection, the utility removes only the Windows Installer configuration information that is related to those programs.
• Removes the files and registry settings that make up the Windows Installer configuration information for programs that you select
If you use this utility to remove the Windows Installer configuration information for your program and you plan to reinstall the program, you should reinstall the program in the same folder where you originally installed it. This prevents duplication of files on your hard disk or disks.
Back to the top
MORE INFORMATION
This version of the Windows Installer CleanUp Utility works correctly in all 32-bit versions of Microsoft Windows. The 32-bit versions of Microsoft Windows are as follows: • Microsoft Windows Vista
• Microsoft Windows Server 2003
• Microsoft Windows XP
• Microsoft Windows Millennium Edition
• Microsoft Windows 2000
• Microsoft Windows NT 4.0 with Service Pack 3 or later
• Microsoft Windows 98
• Microsoft Windows 95
This version of the Windows Installer CleanUp Utility works correctly in all 64-bit versions of Microsoft Windows. The 64-bit versions of Microsoft Windows are as follows:• Microsoft Windows Server 2003
• Microsoft Windows XP
• Microsoft Windows Vista
The following file is available for download from the Microsoft Download Center:
Download the Windows Installer Cleanup Utility package now. (http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)
Back to the top
3. *****Saurabhc, When you run this utility, a window will open up that lists all the of the programs that you have installed. It looks a little bit like the add/remove program window. Select the "Nokia Connectivity Cable Driver" and the "PC Connectivity Solution programs, then run the utility.
4. Now go back to the Add /Remove Programs in Control Panel and try and remove "Nokia Connectivity Cable Driver" and the "PC Connectivity Solution programs now. They should now uninstall!
5. Next I restarted my computer.
6. DO NOT install 6.83!!!!
7. Now go to Nokia website and download PC Suite version 6.82_rel_22:
http://nds1.nokia.com/files/support/global/phones/software/Nokia_PC_Suite_682_rel_22_0_eng_us_web.ms...
7. You should now be back in business with a working version of PC Suite.
It is obvious that there is a serious issue with the cable driver portion of 6.83 that corrupts MS Windows Installer program during the install process. Even though you initially can install 6.83, the cable driver is messed up. Also, you can't then uninstall the cable driver unless you run the Windows Installer Cleanup Utility.
After a month of fighting this issue, the Windows Installer Cleanup utility was the key to clearing the conflict of the cable driver. Unfortunately, 6.83 has a serious issue with the cable driver.
Good luck...Sorry for being long winded!

Reg: Diff between SAP business suite and Business One

Hi Guru,
We are planning to implement SAP in our industry.
Now we are planning to implement SAP Business one. After three years we will bring in complete SAP implementation.
1.Can you please tell the difference between complete SAP Implementation and SAP B1.
2.Could you please explain, if we implement SAP B1 right now. will there be any problem if we go for complete implementation.
3.If the business grows above one billion,will B1 hold good?
4.What is the business suite?
Thanks & Regards,
S.Nehru

Nehru,
thank you for considering SAP solutions.
W regards to question 1 and 4, in short:
SAP Business Suite on traditional relational databases or on HANA is the most extensive SAP set of SAP Business application and includes the SAP applications ERP, CRM, SCM (Supply Chain) SRM (Supplier Relationship) and PLM (Product Lifecycle)
A1 is based on SAP Business Suite and tailored by SAP partners.
B1 is a separate product, so is Business by Design.
All solutions are integrated and used by the largest global enterprises and their subsidiaries as well as by SME small and midsize enterprises, depending on their requirements.
Please see Solution overview of SME solution for more details on A1, B1 and Business by Design.
In addition to the Business Applications, SAP also offers Business Networks Solutions like ARIBA and Concur.
The majority of SAP customers are SME customers: At the end of the third quarter of 2014, SAP has more than 263,000 customers, of which more than 80 percent, or 212,500, are SME's.
Without knowing more details, it would be not professional from my site to provide an answer to your question 2 and 3. Please work with your local SAP partner or SAP Account Executive to validate your approach.
Thank you
erich

So many problems after downloading verizon internet suite!!

After downloading the verizon internet suite , i am having some major issues with my computer that i have never had in the 3 years that i have had it. Actually , i have never had problems with my computer or any of the anti spyware and anti virus programs that i have had for it. now that i downloaded the software from verizon, the biggest problem is that my computer will just shut down in the middle of something or shortly after start up. i have also tried doing some custimized scans and it just shut down right in the middle of it. i have an acer inspire with vista and after downloading it , everytime i start up i have a little box in bottom left corner that says eRecovery agent and the only thing u can do is close it. the only thing i know about it , is that it has something to do with acer but i can't find the eRecovery anywhere else on my computer. when i have problems with it shutting down at start up it will continue to do it everytime until i start it up with out the ethernet cable and then i plug it back in. This is so frustrating that i am ready to throw my computer threw verizons main office window. Seriously, this has caused so many problems and i have already unistalled the other program i had previously and now i am stuck. Can someone please give me some advise

First make sure that there are no other AV programs on your computer. Even inactive ones. If there is another loaded on the computer, even inactive, you will have issues.
If you do have another on the computer, do a system restore to prior to the VISS install, then remove the old AV and then reinstall the VISS.
Now even though there are some on this board that are biased against the McAfee, its really an undeserved rep. There are Millions of people that use McAfee (it is the second largest AV software out right now after all) with no issues what so ever.
Now having said that, I personally prefer AVG myself. But thats mostly because I'm a penny pincher and refuse to pay for something I can get for free.
====================================================================================
Error exists between keyboard and chair.

E90 problem compatibty between E90 PC suite 6.84 a...

Similar Messages

Maybe you are looking for