E90 stuck in firmware upgrade

Hi,
I am in the process of upgrading the firmware on an E90.
It seemed to be nearly complete, then it announced that it could not find the phone (it is still connected through a USB cable).
Now it has been on a screen "Updating the software" with 1 second remaining for the past hour. The E90 shows "400.34.93 Test Mode" on a white background.
It tells me I should not disconnect or close the updating software.
Any suggestions on what to do next.
Many thanks
Roger
Solved!
Go to Solution.

Hi rogernye, I have experienced a similar situation in the past, during upgrade of latest firmware the PC suddenly indicates my E90 is disconnected, it puts me in a dilemma whether to abort & disconnect.
But I also have to heed the warning of the consequences of damaging my handset, I can't recall the exact steps taken but for sure it was disconnected or aborted & I tried again, fortunately the phone didn't suffer any damages.
If indeed your phone is damaged after disconnection your alternative to take it to the Nokia care point to have it upgraded there, good luck

Similar Messages

7941G stuck in firmware upgrade loop

I have a brand new 7941G phone that we attempted to change from SCCP to SIP for testing. We placed the contents of the firmware zip file into a tftp directory and pointed DHCP option 66 to that tftp server and started the upgrade process. The phone grabbed the term41.default.loads file serveral times over several reboots but now it appears to be stuck in a loop. It no longer tries to pull any files from the tftp server, it just sits with the upgrading screen and then occasionally reboots itself. It is getting an IP address, so that we know is working.
Any ideas?
Thanks

Alistair-
Thanks for the help. We managed to get the phone back on it's feet and loaded with a SIP image. I removed the 8.5.3 images fromt the tftp server and placed the 8.5.2SR1 and 8.5.2 images on the server instead.
However, when I power cylced the phone it still did not pull the new image (or any files for that matter). A previous poster said to take the phone off the voice vlan. I tried this thinking I was maybe handing some bad information on my voice vlan DHCP settings. The phone started to pull the new firmware once I moved it from the voice vlan.
I went back and checked my dhcp settings on the voice vlan and everything looked good. The phones must have some kinda feature or bug in the bootloader that if it gets the same IP address from a DHCP server it eventually stops trying to pull and image. Once the ip address changes, it tries again for some reason.

Lenovo A536 stuck during firmware upgrade

My Lenovo A 536 is not starting, it gives the error No Command at start.
I was upgrading its firmware but is stopped automatically and rebooted.
On start it is not booting completely.
please help me anyone. Or please give me stock ROW Rom so that I can flash it to original state or someone please give me update.zip so that I can install from recovery... please

1. You need to have adb drivers installed (google for that).2. You need mt65xx usb vcom drivers.Click Here To DownloadIf you feel any problem to install vcom driver, watch this video on YouTube click here3. Flash Stock Rom using Smart Phone Flash Tool
Step 1: all drivers installed
Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).Don not connect your phone to PC now.Step 3: Download the Stock Rom form here extract it on your Computer.Step 4: Extract Smart Phone Flash Tool on Your Computer.Step 5: Run Flash_tool.exe located in folder SP_Flash_Tool_v5.1352.01Step 6: Once Smart Phone Flash Tool is launched, Click on the ScatterLoading Button from the Right. Select Scatter file located in Target_bin folder MT6582_Android_scatter.txtStep 7: Now, Click on the Download Button to begin the Flashing Process.Step 8: After that only connect your Smartphone to the Computer using USB Cable (without battery if it is removable). After connecting the device to the computer it will start downloading , will take 10 mins to download fully.

Iomega Storcenter ix4-300d stuck at 95% after firmware upgrade

Hi,
I upgraded my device after I got an email that there is a new firmware:
An update to version 3.2.10.30101 of the Iomega StorCenter ix4-200d software is now available
I installed the update but now it is stuck at 95% after rebooting.
Never had any problem before the firmware upgrade.
Any advice?

Hello BelgianTomas
I recommend that you first power down the unit if the unit has not completed the boot process. Then re-seat all disks and try booting the unit again. Please do not try to access the web interface until the power led is solid white.
Next would be to try moving the internal disks to different bays to see if a different drive order wil allow the unit to boot.
If that does not help, LenovoEMC suppor should be contacted for more advanced options.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

E90 firmware upgrade problems

Recently, I upgraded my E90's firmware from the version 7.xx to 300.34.84. I backed up all the data on the phone prior to the firmware upgrade - as required for the retention of software certificates and data.
Some of the trouble I'm having now is with the Download! folder, specifically the Applications subfolder - it does not update it's content - actually, it's totally unaccessible. Also, the Windows Live Application no longer works - and I'm unable to download a fresh copy as a result of the problems with the Download! folder. Prior to the firmware upgrade, I had using the Windows Live Messenger application and the Windows Live email/messaging synchronising facility in the Messaging folder hitch-free for about three months.
Any ideas? Thanks
By the way, I don't think the upgrade in this case has much merit. Other than the A-GPS, there's no real substance in 300.34.84.
Symbian connected me to the world, to my dreams.. Thank-you Nokia

I just saw a post for the exact same problem on an E71. Search 'E71 Download! folder: Service Not Available' by hazz on this site. See my problem is I'm not too interested in the third-party software available from ea.mobile.nokia.com/ea/apps/. I'm interested in the ones that become available in the Download! folder, under Applications. When I click on Applications, the chevron appears, followed by the progress bar, which fills almost completely, then shows the this message: 'Catalog update failed!' I believe my internet connection is working fine - I watch youtube on the device often.
This week, a new link appeared - U2 - Get On Your Boots - which great, 'cause U2 rocks. But, Applications remains dead - even if I remove it from the list and click - Options/Select/Refresh List.
I got around the Windows Live problem by using the awesome Nokia Messaging (email) [http://email.nokia.com], and the instant messaging application mxit. Besides those minor issues, I think the E90 is a pretty awesome device.
Thanks
Symbian connected me to the world, to my dreams.. Thank-you Nokia

6220 Classic Firmware upgrade - stuck / any ideas ...

Am trying to use Nokia Software Updates to do a firmware upgrade to my 6220 Classic from v 03.06 to v 03.46.
All going smoothly until the stage when the updater tells me : Updating the Software, please wait... Estimated time left : 15 mins.
This has now been reading like this for about half an hour - clearly it's stuck.
Any ideas ? Lots of grim warning about "Don't disconnect etc etc".
Thanks.

I ended up solving this myself simply through persisting. Dull and clunky process, but I ended up ignoring the "do not disconnect..." warnings. disconnecting it, and starting all over again.
Strangely, and I hope it's different for you, I now have a phone that confirms that it has the new firmware loaded up, but I see no discernible difference in performance, battery life etc etc. Close to a waste of time, if Nokia cares (which I don't think it does).

Firmware upgrade stuck

My router says there is still a firmware upgrade in progress. I have flashed and reflashed (using UI and tftp util) multiple times, and this will not go away.
This is all on top of erratic behavior, dropping the connection, periods of no connectivity, periods of degraded performance, etc.
I've tried a factory reset, and holding the button in for 30 seconds. Nothing will get this perpetual firmware upgrade to go away.

Anytime a firmware upgrade is interrupted (for whatever reason) before it completes, there is a serious risk that your router will die. However, there is always some hope. Please try the following:
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 08-25-2007 03:43 AM

Help..I updated my iphone4 to iOS to 7.1.1 from 6.1.3 at last stage of firmware upgrading throwing an error 16 and stuck in recovery mode.

HIAll
I waited so long not to update of my iphone4 to 7.x.x because of bugs and not much stable for iPhone4 and many reviews from friends saying phone is very slow and many bugs but after release of iOS 7.1.1 of many improvements for iphone4. I tried to update my iphone4 to 7.1.1 through iTunes at last stage of firmware upgrading its showing an error occurred error (16). I checked in internet error16 is purely hardware issue before my phone is very good condition in iOS6.1.3 no problem with my phone, But after upgrading to how it will be hardware issues. why Apple engineers are not testing properly their software’s before releasing great updates to customers now my phone is out of warranty and I can’t use it anymore just showing iTunes symbol and charger on the screen while on/off showing apple logo. From the past September there is no proper solution for error 16. Don’t know what these people are doing about that error why apple is crashing customer phones by releasing useless update to phones what is the point of buying such a expensive phones don't know what to do with this phone. Tried many possible ways
Tried: presing home+power button at 95% of firmware update
          Disconnected battery and restored
          used DrPhone to restart
          tried to restore old version 7.x.x
          no luck.
          used new original cables
          restored with Macbook
          tried to restore in 3 Different computers and so many times but no luck

Hi, to get your iPhone 4 back to normal, here're two ways for you.
1. Use Dr.Fone for iOS. The free trial version can fix iPhone screen of death. The free trial version can do that, you don't have to pay.
Just download and install this software on your computer and connect your iPhone 4 to computer with a USB cable. When it detects your iPhone 4 is abnormal, click Restart the device to get your iPhone 4 to be normal.
2. Use iTunes to fix it.
Step 1. Make sure that the latest iTunes is installed on your computer.
Step 2. Plug into a USB cable to connect your iPhone4 to computer.
Step 3. Press and hold the Home button and the Sleep/Wake button at the same time for about 10s.
Step 4. 10 seconds later, release the sleep/wake button. But continue to hold the home button until a message comes out, saying "iTunes has discovered an iPhone 4 in recovery mode, you must restore this iPhone before it can be used with iTunes".
Step 5. Click your iPhone 4 in the left sidebar to show the device control panel on the right. Then, click Summary.
Step 6. Go to Backups section and click Restore Backup.... In the drop-down list, choose a backup file and restore to your iPhone 4

Stuck with Management mode firmware upgrade..see pic

Management Mode
Firmware Upgrade
File Name:___________________ Browse
Apply Reset
How do I get around this. I upgraded to WRT54Gv5v6_1.02.5.002_fw.bin and now when I reboot this is all I get. If I try to go to another version I don't get connectivity. I only have connectivity for this part then I lose it.
Every time I type in 192.168.1.1 I always get this display....
I've tried to hold the reset up for 30sec the first time then 1min.......then unplug for 10 to 20 seconds, (still holding down the reset button) and reconnect. Letting go of the reset button once it's connected.
Is the router gone? Will I have to get another one? Would like to get your input.
Thanks

Download firmware file again. And browse for it, and upgrade it. Reboot router, it might work.

E90 Firmware upgrade

I have downloaded and installed the Software Updater. However, while running it, it wanted to download a 73mb firmware upgrade. My problem is that because I have a slow connection, 73mb can take up to 3 days to download so I had to cancel it.
Is it therefore possible to download that upgrade piecemeal (using GetRight) and run locally instead of being connected 24/7 to the Internet?
Regards.

Your options are:
- go to a friend, relative, colleague, university, etc., where a higher speed network connection is available, and update there
- go or send the phone to your nearest Nokia authorized repair/service center and ask them to do the updating for you
- get a faster internet connection at home
- live without updating the firmware until one of the above options become viable for you

ZenV Plus STILL stuck in recovery mode after firmware upgrade

=Hi there,
My ZenV plus opened in recovery mode for no apparent reason... I have tried every option to try to fix it, including downloading and installing the firmware upgrade - this generated a message saying the upgrade was successful but the player will still only start in Recovery Mode after trying to reboot it. So what do I do next? Thanks in advance for any and all helpful suggestions.

AHi,
Can you please try resetting the ZEN V Plus to see if it helps?
To reset the player, use a pin to press the reset button.
Did this happen out of the blue?
Do you have any contents in the player? If you do, please remove them to see if the player is booting up properly.

Firmware Upgrade and Battery Life?

Since the firmware upgrade on my Macbook in early February the fan appears to be running at full speed all the time and battery life is crap! Has anyone else noticed this? Is there a fix/workaround available please?

Sounds more like an app stuck processing that shouldn't be....does happen from time to time. Behing hot means it is constantly processing.
To fix:
Try a reboot (described below).
Think of it this way, the iPhone is more of a computer than a phone. It suffers from being a new OS and nobody can deny there are not bugs and memory leaks. The longer left running, the more things start to fail or slow down (I have had the iPhone since day one of original phone and I am just speaking from my experience). Thus I equate it to like when Windows95 came out...not sure of your age or if you remember those days...but back then it was a running joke of how many days you can keep Windows 95 running before you had to reboot. I am sorry to say but the iPhone is the same way right now (but getting better with a few hiccups back during the 2.0 release). So for me, I reboot daily when I leave in the morning and take it off the charger. By doing so I rarely see any lag or problems.
A reset/reboot is:
Go to Home Screen
Press and Hold Home Button
Keep holding and press and hold Lock Button
Keep holding Both
You will see Slide to Turn Off (Don't let go to slide, just keep holding)
The phone will turn off (in time, but screen will look like it has some white lines)
Keep Holding
When you see the Apple Logo, you can let go.
Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.
You may also wish to read this tread about reboots and odd application behavior.
http://discussions.apple.com/message.jspa?messageID=5851978#5851978
For me, 2.1 works great.

Firmware upgrade on mac book air 13"

i clicked the update next to the firmware upgrade 1.6 option in app store, it is now stuck on "checking for new updates", i can't shutdown or anything, it says you must wait for os updates to complete before shutting down. the message has been displayed for the last 6 hours. anybody got any pointers, have contacted apple, but they are closed in the uk now, US care are trying to call but can't seem to get through to me.

You can force quit the app store and load it down manually. See this thread for a link.
https://discussions.apple.com/thread/4141390?tstart=0

Firmware upgrade nokia CK-7W car set

Hello.
Is it possible to firmware upgrade the car kit CK-7W ?
I have problems that the audio connection between my Nokia 6210 Navigator and CK-7W is is in falling out periodical.
I have the lates firmware in my nokia 6210 navigator (3.25)
Message Edited by hchdk on 01-Jan-2009 11:03 PM

Thanks for the response.
The car kit was installed by a Car Phone Warehouse Nokia approved fitter about 4 years ago The kit has worked really well until recently!
The contol button doesn't seem to be stuck in and responds as it should to button presses. In terms of the cable being squashed or damaged. Obviously there is a chance, but in actual fact, only an inch is on show before it is hidden behind the dashboard. In this instance I'm not sure what damage might occur since I don't know how to remove the dash!
Apologies, I'm not certain I understand your comment re:
- "You can rule out the button by disconnecting it then starting the car and connecting, before switching off the car to see if the kit shuts down."
How do I disconnect the button? Does it pull away from the lead / cable?
Many, many thanks for your help,
Chris

My BB 8520 won't connect via USB after the firmware upgrade

Hi,
All was working fine until I followed the upgrade prompts. The 'phone works but a) it won't accept Opera Mini 5.1 (which was in the 'phone already) and b) I cannot connect to the PC via the USB cord.
What happened?
This 'phone shares the same SIM card with 3 Nokias (E72, E90, E62) and I've never had firmware upgrade problems with them - in Symbian OS.,
Any ideas?
Regards, Douglas
L. Douglas Henderson - ARTCRAFT Music Rolls
EDIT: Link Removed. Please review User Guidelines under section "No spam please."

Hi, again -
Just downloaded Bolt and I like it also. (No more zooming: whoopee!)
Never heard of this browser before, having used Opera Mini/Mobile (depending upon the 'phone) since 2004. Was on E-Mails for cell 'phones dating back to 1997, coast to coast: primitive service back then! [Rarely did I use the default browser on any 'phone I've had, including Motorola and Palm before Nokia.]
Bolt loaded faster than Opera Mini 5.1 did on my Nokias and the Blackberry 8520: amazing!
Now my "not as good as a Nokia with Symbian" handset is useful again. The firmware upgrade did improve the videos and the links to them, so it was a GAIN SOME FEATURES and LOSE SOME FEATURES firmware upgrade.
Probably Opera will have a link for the Blackberry 5 platform, eventually. The problem, I think, was that the link only worked with three versions of their 4 edition.
You have made my day!
Thanks.
Regards, Douglas
PS: Not until the Nokia E90 Communicator was off the market for a year or so, did Opera put out a Mobile browser which functioned on it. The Communicator - in a variety of versions - had a 12 year run in Finland, something of a record for handsets in this field. For Word .docs, fast typing and office style activities, it's hard to beat. (You can't wear one in your pocket if the garment is Spandex, of course.) The music on the E90 is loud and good; with the wireless aux. speakers it rivals a portable stereo, so I use it for that purpose much of the time, even when off-line.

E90 stuck in firmware upgrade

Similar Messages

Maybe you are looking for