E9280t boots to Starting Windows and then monitor loses signal

PC just arrived last night and is giving me fits. Upon boot it will proceed to the Starting Windows and then the monitor goes black and I get a No Input Signal message. I can hear the Windows startup sounds but it will never go any farther.
I can furiously click to put the system to sleep and after it goes into sleep mode I can power the system off and back on and it will boot to Resuming Windows and then work fine. However the next time I reboot the system it goes back to the Starting Windows issue.
Help please of this thing is going back to HP in pieces.
Video Card is ATI 4850 1GB
Motherboard bios version is 5.24

Thanks for the reply, but sadly I've already been there and done that. and couldn't get into windows that way at all. In the process of updating the ATI drivers to see if that helps.....

Similar Messages

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

Hi daveormond,
I'm sorry to hear you are having these issues with your iMac. If you continue to have issues with your Mac shutting down part way through the boot up process, you may find the troubleshooting steps outlined in the following articles helpful (given your description, it sounds like it could be either issue, or a combination of both):
Mac OS X: Gray screen appears during startup - Apple Support
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

Satellite A300 - Cannot start Windows and cannot repair it

hey
first i must say my englisch is not the best ;)
But i hope u undersrand my problem and can help me plz
Today i bought a A300 notebook
I have formatiert the second hard drive
Now i can start windows and i can't repair my system and install new windows
Please help me !!!!!
and sorry again for my bad englisch ^^

To be honest I dont understand your question
If you have formatted the second HDD this should not be a problem to start Windows.
Have you burned the recovery disk? Then boot from it and install the notebook.

Having multiple tabs open in one window, and then opening a new window and closing it, will close the newly opened window, but it will want to close the other original window with the multiple tabs as well.

This only happens if the original window has multiple tabs, and the new window has only ONE tab at the moment you close it.
Also, the problem only occurs when TWO windows of firefox are open. So opening up a 3rd window, and then closing it, will not give you any problems. The interaction occurs between two windows of firefox only.

This can happen if you drag a tab slightly down in the browser window while clicking.
Firefox has a feature called tear-off tabs
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
You can also do this via the right-click context menu of a tab: Move to New Window
You can drag that tab back to the tab bar in the original window to undo that detaching.
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

At night, as soon as I plug my iphone to be recharged, my iphone starts behaving abnormaly. It is like somebody has taken control of it. I see the screens moving, music starts playing and then stopping, etc.

At night, as soon as I plug my iphone to be recharged, my iphone starts behaving anomaly. It is like somebody has taken control of it. I see the screens moving, music starts playing and then stopping, etc. I have noticed that several nights. What I do is in Settings is to change into Plane Mode, thinking that, may be if I do that, somebody that has taking control of it will not be able to download data. Yesterday night, I was awakened by an alarm, whose setting I did not changed. When I looked over, the alarm screen changed to Settings and the Plane Mode changed alone in front of my eyes, from on to off.
I have not observed such a situation during the day. Only when I plug the cable.
I suspected that may be there is no Trojan installed. May be the cable, which is a spare cable, has been modified by a hacker, and it has electronics installed in the connector. But tested with the original cable, and the behavior was the same, as described above.

Thanks Meg for your reply.
It could be that both cable are bad. But, anyway, you would not expect any of these manifestations, even with a bad cable. I had bad cable for my 4s, and never saw such a thing!
I contacted by chat the support of Apple. They told me that this behavior could be a software problem and recommended me to do a full recover of my iphone. That meant, putting in at the factory conditions and recup all the data from the backup. I did that, and the behavior did not change. The backup was made with the data of my PC, not icloud. Tomorrow will try with icloud and check if that will work.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Every time I click on a link to download an app the itunes store starts opening and then crashes? I am using google chrome.

Every time I click on a link to download an app the itunes store starts opening and then crashes?
Iam using google chrome.

I believe this is a duplicate of an existing question, which has answers: https://support.mozilla.com/en-US/questions/749313
Thanks,
Dave

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

Try updating the printer driver.

I am unable to re-install itunes. The installer starts ok and then indicates that it can not access a network !!

I am unable to re-install itunes. The installer starts ok and then indicates that it can not access a network !! I have tried to uninstall but get the sme error message. I have used 3rd party software to uninstal but still have no joy. My pc is running Vista.
Can you anyone offer a working solution ?

Many thanks.
Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

My iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

my iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

Your iPHone is designed by intention to shut off when there is a reason for the softwarer to believe that danger is immenent to the hardware. This can occurr if the software is running applications that have been corrupted due to all types of different scenarios. My best advice to you would be to restore your device back to default manufactures settings and do NOT restore the current backup of the IOS program currently running.
If this corrects the problem with your device intermittently restarting you will then know you have had applications there were corrupted on your device. Once you are convinced there are no issues with the hardware of your device you then are free to begin downloading software apps that were earlier on the device.
Good luck.

Having problems opening iTunes. It tells me to reopen a window and then crashes

I open iTunes and a pop up box informs me to re-open itunes in another window and then it crashes with a report of the crash.

To access a second (or more) library, hold down the
Shift key when launching iTunes 7. In the resulting
dialogue you will get the option to create a new
library or navigate to the other Library. The default
location for your library files is \Documents and
Settings\Username\My Documents\My Music\iTunes. The
files will be called something along the lines of
iTunes Library.itl
It worked! Thank you so much... I thought I would have to go through and import all of my songs one by one again.
Again, thank you! I really appreciate it!
Windows Windows XP It's been acting gay lately

When working on word file or watching a film on safari my screen starts flickering and then disappears

Dear All,
When working on word file or watching a film on safari my screen starts flickering and then disappears? Is it dangereus? What does it mean?
Thanks
FMirza

Go to another Optometrist and get a second opinion or see an Ophthalmologist.
Ciao.

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Trying to select the Calendar check box in iCloud window and then it asks me If I want to merge I hit ok and the it tries to ad see spinning fan icon and then just quits and is then unchecked. Does Anyone have a solution to fix this?

Trying to select the Calendar check box in iCloud window and then it asks me If I want to merge I hit ok and the it tries to ad see spinning fan icon and then just quits and is then unchecked. Does Anyone have a solution to fix this? It works just fine on all other 5 Macs I have. I have tried to sign out and in and even restart the computer. I am running Yosemite on all 6 of my Macs.

Search the web or help doco about the Captivate feature called Return to Quiz. It will do what you are looking for here according to your description. There's even a Youtube video from a year or two back that shows how it works.

E9280t boots to Starting Windows and then monitor loses signal

Similar Messages

Maybe you are looking for