E93z All in One I want Audio playback through speakers and headphones at the same time

Hi there,
As the subject line reads I am hoping to enable playback through both the headphone and internal speakers on the E93z All in One unit I have.
Is there is currently a way to do this with the Lenovo HD Audio software for the Realtek system? It detects the headphones and does the typical shut off of the internal speakers however no option to enable playback through both seems to exist.
Running Windows 7 Pro 32 bit.
I cannot enable stereo mix (by right clicking in the playback area of the sound settings in Windows) to try and come up with a work around.
I have tried re-installing the drivers and not luck with more options to do this.
I have tried un-installing the Lenovo HD audio software and still no luck using the vanilla Windows 7 software.
Any suggestions would be greatly appreciated.

Asad A wrote:
Well basically I want to hook in some external speakers via the headphones jack and the more speakers the better, I just figure if there's a way to have 4 speakers instead of just two it'd be cool, why let the internal speakers go to waste?
Do you know if plugging in headphones physically cuts off the internal speakers or if it's a software/driver thing?
Thanks to all who've replied
I'm pretty sure it's all in the OS, since the level control is right at the top. You can actually customize sound profiles individually for headphones or the built-in speaker, or any other sound devices. You can also use Bluetooth headphones (or a headset) or USB output devices. As far as I know, only one can be selected (in System Preferences) even if multiple ones are plugged in.

Similar Messages

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

Does Apple TV output audio via both HDMI and Toslink at the same time?

I would like to know if Apple TV outputs audio via both the HDMI and Toslink ports AT THE SAME TIME...
Ideally, I want to use it in my main zone connected to my TV via HDMI and convert the Toslink signal to analog to be exported to Zone 2 on my receivers. (My receiver - as do most - can only direct analog sources to Zones 2, 3, and 4)

Hey Bob,
I have this same issue. I was wondering what model of toslink to analog adapter you went with and how well it works?
Thanks!

I was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

i was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

I've recently started to use Numbers but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use. Looks like I have the same situation on my iphone. Any guidance? Thanks.

I've recently started to use Numbers on my macbook pro but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use.
Looks like I have the same situation on my iphone.
The only option I'm being given is to create an lCloud account.
Any guidance? Thanks.

The last thing you want is a second iCloud account. Try logging out and back in in System Preferences. If that doesn't work, I'd get AppleCare on the line.
Jerry

Datasocket help, want to use the same(one .ocx only) in VB and HTML at the same time

I want to create one ActiveX control that can be use in VB and HTML. My control will consist 1 CommandButton, 1 TextBox and 1 Label.
My Objective is to have real time data passing between the same control which will be used at VB and HTML at the same time.
For example, from HTML if I click a button, the text at textbox at HTML will be pass to the label at VB at the same time. And vice versa where when button at VB is click, the text at textbox at VB will be pass to the label at HTML.
Help me.

Hello Sam R.,
The ActiveX will be written in VB6 with Measurement Studio6. It's some sort of tutorial lesson for me to test the capability of DataSocket.
I want to create 1 control which will act as reader and writer. I am using Windows XP with IIS as web server and testing using 1 open VB6 Form with the control and 1 HTML file with the control using Data Socket Server with dstp://localhost/something. I dont know whether I need to have the script or not, what ever can do. tell me if it is the way to do. If it can be program directly in the control is better.
Basically, yes. the command button inside the control should updates both label and textbox.
If you can say that 1 datasocket control is enough, I will follow your advice because you are the expert.
I try before by using the example in DSReader and DSWriter but I cannot do the 'real time' updating when I click either button in VB6 or HTML page. It can only updated when I click again the commandbutton and

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Audio input and output at the same time

Hello mac users.
I have one simple question: since the new macbook has one single audio port for both input and output, how could I, for example, play my guitar AND listen to the headphones at the same time?
I KNOW (because I've tried) that with the iPhone headphones with microphone the port CAN physically work at the same time for input and output, so the question is: what can I use to do that? Will a simple splitter do or do I have to use different tricks?
(I know there is a thread on this already, but it doesn't provide a definitive answer)
Thank you!

One of the first questions to ask...
Is the audio input stereo or mono?
When using a headset mic you're dealing with a mono input so you at least know the Mac is capable of that.
If it's mono, and I suspect it is, should be easy to either make or purchase a custom cable that has two female input connectors, one mono input and a stereo headphone input.
However, I'd probably just purchase a USB audio interface, the sound, both recording and playback will be head and shoulders above the Macbooks built in internal audio.
pancenter-

I have an iPad 2 (wifi 3G). Is it correct to use wifi and 3G at the same time ? Or one at time depending on connectivity? Thanks.

I have an iPad 2 (Wifi + 3G). Is it correct to use the Wifi and 3G at the same time, or one at a time, depending on connectivity? Thanks in advance.

Your iPad will use wifi first if available. If wifi is not available, it will use 3G.
 Cheers, Tom

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
can any one help me bcoz i have to publish without air runtime.......

Hi,
This option is available when your publish target is set to AIR 3.6.
You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
Thanks!
Mohan

Recording audio and midi at the same time ??

Is it possible to record audio and midi at the same time in logic?? It doesnt seem to work for me, im assuming there must be unchecked box somewhere that I need to check. thanks,
Dan

Daniel,
You should be able to accomplish this by hitting record on the audio track, and then while holding the "Shift" key down, hitting record on the MIDI track (or visa versa).

HT2472 I must have done something inadvertently and now if I have more than one application open the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

I must have done something inadvertently and now if I have more than one application open, the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

Hi Jan, Almost sounds like Expose or Spaces....
http://support.apple.com/kb/HT2503

Use one external harddrive on both pc and mac at the same time

i bought an iomega external harddrive today
can i use it on both mac and pc at the same times?
for ex:
when i plug in both computer
i could able to read and write on the hdd on both computer
since i format it into 4 partitions (2 journal and 2 doc)
so i wish i can use them separately in 2 computers

Hi Jerry_L and welocme to Discussions,
using such USB or Firewire connected external harddrives with two computers at the same time is usually not recommended by the manufacturer.
Doing so might lead to data-loss and the like.
Check with the manual of that harddisk to verify.
Using it with one computer at a time with your partitioning should be doable.
Regards
Stefan

Why is it taking more than twelve hours to download a 30-hour audio book and why, at the same time, has all the contents of my iBooks library disappeared?

After downloading 7.0.3. And then buying an audiobook on iTunes, all the contents in my Books section disappeared, and the new book - 30+ hours - has still has still not fully downloaded. Are all these things linked?

I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

FCP Audio and firewire at the same time?

Hi, I was pondering an idea that made me wonder this. I hope it is not a stupid one but I am sure I get an "E" for effort or a "god bless his little heart".
I will be moving my mac to a studio to work on a instructional DVD. I will be capturing from one main camera real time via firewire, I have the option of going out of the console via optical for the instrument tracks and vocal. ( whether I can only have one active audio inputed track or two doesn't matter but would like two).
This audio will be pro quality and I just want to use FCP.
I am only interested in the video without the camera audio.
I want to capture the camera video(firewire) and studio(optical) audio at the same time.
If not it's no big deal I can route audio to the 3.5mm audio mike input on the camera.
I am running FCP studio and have no budget and a chance to play. I am on a barter project. I was just hoping for a time saver and down the road I would be happy to know my limitations as I may move into the studio and "sync" up.
I have another camera that I will add later for my Picture in picture effects.

Hey X thanks for your reply
Well I talked to my friend at the studio. and we are still saving the audio on digital hard drive in case this doesn't work. ( Which I know is the right way). I only asked the question because I apparently am lazy and want to spend as little time trying to sinc up later. My solution was to be fluid. In the end the project would be available for download tutorials/lessons from his web page, which will be a whole other delivery question as I am working through the third party whose project this belongs. Given my information I am trying to cover a lot of possibles to create something better than he is asking ( A Pro Job )
I was hoping to cross from "hobbiest" to "entry pro" here. Most I get to play with are relatives videos and stills. I have two completed two paying jobs in which I have purchased the mac and Final Cut Studio.
This is more of a controlled environment and wanted to utilize as many choices as possible.
The camera I am using (Panasonic PV-DV951-K) doesn't record to tape properly or doesn't replay what was recorded on tape. My solution was to go directly to FCP via firewire as a live realtime capture.
I opted for this as having no choice and in the end. Given the amount of lessons that would have to be captured and the equipment I have conjured up I think it is my best solution.
Again I thank you X and I meant no disrespect as to who is clueless. I am the one asking the questions. I don't always ask questions until I have searched the forum for an answer and appreciate those of you who take the time to answer "patiently".
Also I am an electronic technician and in a pinch devour troubleshooting to the point of magiverism.
When this is all over and I am enjoying a pint and reaping what few dollars this creates, I'd like to buy you all a beer. Then I'll plan the next hairbrain project.

E93z All in One I want Audio playback through speakers and headphones at the same time

Similar Messages

Maybe you are looking for