EA 2700 disconnecting every once in awhile. (30/60minutes)

Heya,
I'm having issues with a newly bought EA 2700 router, I'm getting disconnected every 30-60 minutes. (It's a brief disconnect for about 10seconds, perhaps a huge packet loss or something?)
I've tried connecting directly to the modem and that seemed to have fixed the problem, so I think that it is a router issue...?
Perhaps somebody here knows how to fix this. Would be greatly appreciated.
Edit: I'm connected with a wire. Also, my download/upload/ping is 35mbps download, 35ish mbps upload, and 8ms. (I have a 35mbps connection so that's fine) But when I connect my PC to the modem directly, my MS becomes 5, and my upload jumps to 77mbps. The download stays the same... I thought that was quite strange. ;o

Hmm alright. I've already reset it multiple times, also reverted it to factory settings twice. But I keep disconnecting every hour orso. The firmware is up to date as well. My NIC is running at 1.0 gbps, I'm not sure where I can see what the router is at however. But I assume 1gbps as well? I've tried disabling UPnP, disabling IPv6 at the network adapter. I also tried to set the router to Bridge Mode, that made my upload go up to 77mbps again and my Ping down to 5, but I disconnected every few minutes for a while, then the day after (I went to bad cause it was driving me insane) it seemed to work for a while, but then I started getting disconnected for brief moment again. So I put it back to automatic DHCP config.
Edit: I also tried to empty the %temp% folder, that seemed to help, but not for long. (Perhaps not at all.)
Edit2: I also replaced my network cable twice, but seeing as the issues went away when I plugged directly into the modem I figured that that couldn't be the issue either...
Edit3: I keep remembering things that I tried to do in order to fix this, I also reinstalled my network drivers. ;-)

Similar Messages

  • My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

    My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

        Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

  • I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks

    I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks

    Hi again, I am on an iMac using OSX 10.7.5, I"ve taken screenshots to show you I think my settings are correct

  • Does my password need to be reset every once in awhile?

    My iPad will occasionally decided to forget my password, but when I re-enter it, it will refuse to acknowledge it. I can only access the features of iTunes and the App Store etc, if I reset my password on the apple site. There seems to be no real pattern for this treachery that I can figure out, so perhaps I am just being a noob and am not aware that the apple password needs to be reset after awhile? This has happened approximately 4 times and I am Running out of password ideas.

    Nope! I'm not getting any message other than one asking me if I have forgotten my password, then giving me the option of recovering it. My iPad simply refuses to accept that the password that I put in is correct... This happened before iOS6 as well... Could it be that I am living in a country other than where my AppleID is based?

  • Help! only apple logo is showing... every once and awhile it stoips and goes away like its trying to work; then goes back to apple sign againnnnn!!!!

    my cousin has a 2 or 3g apple ipod.
    okay so today my cousin told me that at 11:00 today she downloaded 2 apps: twitter and a weemee one. she was playing on normal apps after the 2 downloaded adn her ipod just randomly shut off. she thought it needed to chargfe, so she plugged it in. for the rest of the day it did not turn on and gave the apple logo. shes tried to reset it, but it hasnt worked. ive come to the conclusion that this theapps werent the problem, because me and her sister both have the same apps.  my cousin who has the issue has a 3rd generation ipod touch. and she also stated the apps werernt the problem because approximately an hour before she downloaded the apps, her emails got wacked. when she clicked on the email app, it only showed a peculiar date: 12/31/00 and nothing else. she plugged it into a laptop when she got home, and it asked her if she wanted to update it, however it would lose her data. she clicked yes anyways, not sure what it had to do. she found ou that it lost all of her data, songs, apps and everything, and replaced it  with the ipod 4th generation starter apps (facetime, camera, game center, etc.) and she cant use them because she doesnt have the 4th generation ipod.? howand why did this happen and how can yopu resolve it ASAP? thanks. all answers appreciated:)
    i feel reaaaaaallly bad for my cousin, so can you please help reaaaaaallly soooooooon?!?!?

    I would try placing the iPod in DFU mode and then restoring the iPod to factoery defaults/new iPod.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Was the iPod jailbroken?

  • Every once and awhile, the audio on youtube is gone. If I switch to another browser that very instant, the audio works fine. Any ideas?

    I really have no idea what is going on, so I can't be much more specific. I'm using Windows 7 64-bit and Firefox 3.6.13. It only happens when I use YouTube.

    Try to clear the Flash cookies and settings.
    Flash Website Storage Settings panel:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
    See also Flash Local storage settings:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

  • Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following i

    Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following.  When I called the support at AT&T they think the phone is shot and it is a hardware thing but i have a hard time believing that when it happened when I sync'd it to my computer.  It did get progressively worse though, at first it crashed not that often and then got worse.  So restores are failing, recovery, everything.  Anyone run into this? 
    11-11-16 18:20:36.319 [2232:16dc]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:20:38.350 [2232:1c50]: <DFU Device 0F128BE0>: production fused device
    2011-11-16 18:20:38.350 [2232:1c50]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:20:38.350 [2232:1c50]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#1bfe4c4c
    2011-11-16 18:20:39.132 [2232:1c50]: WinDFU::UploadData: EOF, cbRead: 553
    2011-11-16 18:20:39.147 [2232:1c50]: WinDFU::UploadData: ZLP
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:02.210 [2232:1c50]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:03.491 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:03.507 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:03.757 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:04.554 [2232:1b88]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:21:10.882 [2232:1b88]: <DFU Device 0F198478>: production fused device
    2011-11-16 18:21:10.882 [2232:1b88]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:10.882 [2232:1b88]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#cfe11997
    2011-11-16 18:21:12.788 [2232:1b88]: WinDFU::UploadData: EOF, cbRead: 1321
    2011-11-16 18:21:12.804 [2232:1b88]: WinDFU::UploadData: ZLP
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:20.866 [2232:1b88]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:21.835 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:21.835 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:21.897 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:22.054 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:22.054 [2232:1838]: command device request for 'getenv radio-error' failed: 2008
    2011-11-16 18:21:22.054 [2232:1838]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:22.054 [2232:1838]: <Recovery Mode Device 0F2A7768>: production fused device
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:24.007 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:24.007 [2232:1838]: command device request for 'getenv ramdisk-delay' failed: 2008
    2011-11-16 18:21:38.319 [2232:1344]: fixed TcpWindowSize (64512) can cause restore failure if too large
    2011-11-16 18:21:38.335 [2232:1344]: unable to open device_map.txt: No such file or directory
    2011-11-16 19:21:54.475 [2232:1344]: amai: AMAuthInstallBasebandHandleUpdaterStatus: outputDict is NULL
    2011-11-16 19:21:54.538 [2232:1344]: <Restore Device 0ED73918>: Restore failed (result = 1)
    2011-11-16 19:21:54.647 [2232:8ec]: iTunes: Restore error 1
    2011-11-16 19:22:09.100 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:22:09.100 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:22:09.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.319 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.335 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:37:25.382 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:52:42.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    I also get a system crash reporter key of c392e98c929aa0b351037af00d75d08aeadc843c    bug type 110
    incident identifier  8ff84a87

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • Does itunes have a free music video of the week every week, or just once in awhile?  If not, why do they call it "Free Music Video of the Week"?!

    LOL, but really would like to know...

    I guess then this is a serious shortcoming of iTunes... Up till this point I owned an RCA Lyra MP3 player and it had no problems whatsoever doing these things. I guess, after seeing how iTunes and iPod works, I'd rather return to Lyra if it had an 80 G version. The only thing that still keeps me with iPod is the capacity.
    It seems like that iTunes is a very cumbersome program and it tries to be so much user friendly that it even tries to eliminate the human element. Sometimes, it makes sense to keep files organized in specific manner. Especially when there is work involved and productivity.
    I guess I will just delete everything from the play list and read in the main folder every once in a while, leaving the machine working on it during the night or something, then another night, it will refresh my iPod. That's the only solution I see right now.
    It is interesting that a huge program like iTunes cannot do what a small one like Lyra can. And I even read in user groups that some people created programs for this problem, but those programs don't work with iTunes 7 well yet, so I am stuck with the manual updating or the brutal deletion and re-reading.
    Thank you for the answer. At least I know what not to expect from the program. I just use it for only one purpose: load music onto iPod, then forget about it. It quite an unuseful program for me otherwise.
    G5   Mac OS X (10.4.8)  

  • Mouse will scroll right, left, and down not up. happens every once and a while.

    mighty mouse will scroll right, left, and down, but not up. happens every once and a while. have wiped with alcohol, but no help this time.

    As Barry says, wiping with liquids is not advisable.   However, with a similar problem this is how I approached it.
    1.   Disconnect the mouse.
    2.   Dampen (not soak) a cotton bud in alcohol.  (I prefer whisky).   Then squeeze between fingers to ensure it is not wet.
    3.   Rub the bud against the ball for a minute or so to ensure all parts of the ball have contact with the cotton bud.
    4.   Then rub vigorously on clean white paper for a couple of minutes in a figure of eight fashion and tap it every now and then.  I have seen quite large peices of fluff removed this way
    5    Allow twenty minutes or so for the alcohol to finally evapourate to ensure there is no moisture.
    6    Reconnect the mouse.
    Having said all this, after three years or so your mouse will probably need to be replaced anyway.   Apple appear to be moving away from corded mice and therein lies another problem.   My experience with the Apple charger, Apple batteries and other premium batteries has not been good.   Batteries seem to run down at a rate of 10% per day even though its use is limited to about three hours daily.
    You have been warned.

  • Every once in a while when I open my mail or a page I get nothing but strange lines of symbols.  Many of the symbols are black triangles with question marks in the center.  I completely reset it like new, but problem still exists

    Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center.  I have reset the ipad2 to new condition but the problem still exists.

    A reset does not make tthe iPad "like new."
    First, let's ensure that we agree on just what is a Reset...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute.

    I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting).  My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't.  I am super frustrated at this point.  So any suggestions would be great.  Am I missing something basic or do we just have a soundless iPad now?

    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

    The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

    Short answer:
    Click Hide Song(s), it is what you wanted to do...
    Long answer:
    iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
    If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
    Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
    To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
    tt2

  • IPod nano (7th gen) and iTunes have said it is 'synced' however no songs show when disconnected. Once reconnected, storage says data if fully free even though sync took place, experience of same, help?

    IPod nano (7th gen) and iTunes have said it is 'synced' however no songs show when disconnected. Once reconnected, storage says data if fully free even though sync took place, experience of same, help please?

    IPod nano (7th gen) and iTunes have said it is 'synced' however no songs show when disconnected. Once reconnected, storage says data if fully free even though sync took place, experience of same, help please?

  • RMBP - external screen turns black for a few seconds every once in a while

    My external screen (Dell U2711) connected via Thunderbolt to Displayport cable turns black every once in a while. The rMBP is in clamshell mode. When it starts it randomly blackens the screen for 2 seconds with an interval of 10 seconds to 5 minutes. A restart usually fixes the issue but it keeps coming back after some time.
    Has anybody here experienced something similar?
    What can be the cause of that?
    This really starts to annoy me, because it seems I have to do reboot everytime I connect my laptop to my screen.

    Never had the sort of problem - but then I've an Apple Thunderbolt Display and it just 'works'.
    Could be that you're adapter is shot. You could buy a (or some) new ones from Monoprice (much cheaper than what Apple's third-party solutions sell for) and see if that's the problem.
    Sorry I can't offer a more helpful solution...
    Clinton

  • I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped

    I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped I went into the camera app and tried to see if it would flash when I took a picture but I saw it light very faintly and hasn't done lot up since. Should I get the led replaced?

    First, try bringing up Control Center by swiping up from the bottom of the home screen.  Turn on the flashlight by tapping the icon in the lower left.  Does the flashlight work?  If not, perhaps you have a hardware issue.
    If it works, check the top of the screen when you open the Camera app to make sure you have the flash on.

Maybe you are looking for

  • Problem report only print out when i click back button

    hi all..i having problem with my report print program. the problem is my report did not immediately print out when i click print button. the program require me to click back button before print out execute. please help me to solve this problem. Thank

  • Creating named destinations in InDesign CS3?

    Hello, I need some help with an issue I'm having. I want to create named destinations in a PDF file from InDesign so that I can easily access a specific destination in the file using the #nameddest="something" opening parameter. I tried using the hyp

  • Can dbms_lob.instr have end position?

    I am extracting data from xml using dbms_lob utility and the pattern in XML is as below. <Atag> <Btag> <Ctag>value</Ctag> </Btag> <Btag> <Ctag>value</Ctag> <Dtag>value</Dtag> </Btag> <Btag> <Ctag>value</Ctag> <Dtag>value</Dtag> </Btag> </Atag> I want

  • Problem viewing logged-in users

    I have Cisco Secure ACS Solution Engine v3.3. I have configured it to authenticate users agains Microsoft Active Directory Windows 2003. In The server i have installed Remote Agent. In Reports and Activity i can see Passed Authenticactions, but when

  • Automaticaly change keyboard language depending on item reading order

    Hi I have a form with items both in english and arabic. I would like to change language keyboard automaticaly depending on item. I mean when I focus on arabic item (Reading order : Right to left) the keyboard should be arabic automaticaly whithout do