EA 6500 Media Server Drops Out

Media server works great until I get "Connection Lost" It requires a restart of the AE6500. I have tried stopping the media server and restarting then rescaning but this usually does not help. The FTP function does ot have this issue while streaming music. It only happens streaming Movies.  I thought this was just a media server issue since it happens on the Roku (I have two)  using its media app. But as it turns out, it also happens using plex on both the Samsung and Rokus (The PLEX media server is on my computer). Usually it only happens once and is fine after the router restart. USUALLY. It happened 4 times last night.
Any Ideas?
Thanks

You might reload the FW and set up from scratch and see if you can stablize it.
To safely update FW, I recommend doing the following:
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
Are you streaming via wired or wireless when this happens? 

Similar Messages

  • Flash Media Server Drops Users

    Hello!
    I m experience a strange situation.
    Our servers are Intel i7 - 33 GB Ram and 10 Gb fiber connection.
    Well, when a LIVE instance reach 2800 users, all of them are disconnected from the application.
    Have you experienced similar situation before?
    Is a tunning issue?
    Note: Users connected to other instances / live are not affected. Only the users @ this instance with more than 2800 users.
    We tryed with both versions 4.0 and 4.5
    Linux Debian Squeeze 64 Bits
    Regards,
    Rafael

    No suggestions? I m lost on this issue ...

  • Media Sync "dropping out" with 8520

    I have a 16GB microSD card in my 8520. When I try to sync music via itunes playlists and the BB Desktop manager, evry few minutes (or less!) a box pops up from Windows 7 asking if I want to scan and repair the F drive (SD card in the BB), or continue without scanning. Whichever option I choose it seems to come back after a few minutes again, and every time it does it interrupts the sync process and I have to start again. Any ideas?
    ta 
    dq

    I have a 16GB microSD card in my 8520. When I try to sync music via itunes playlists and the BB Desktop manager, evry few minutes (or less!) a box pops up from Windows 7 asking if I want to scan and repair the F drive (SD card in the BB), or continue without scanning. Whichever option I choose it seems to come back after a few minutes again, and every time it does it interrupts the sync process and I have to start again. Any ideas?
    ta 
    dq

  • OSR 10.3 server drops into ADMIN mode

    Using WL 10.3, jrockit_160_05 on RH on a 2 node cluster with the registry.war deployed to a single server within the cluster.
    The server running Oracle Service Registry application will drop into ADMIN mode, but not much is logged in the server log. There were no entries in the log for over an hour prior to the server dropping out of RUNNING status, and no one is logged in ( "no active sessions" )
    <May 26, 2009 11:20:26 AM EDT> <Warning> <Socket> <BEA-000450> <Socket 12 internal data record unavailable (probable closure due idle timeout), event received 17>
    <May 26, 2009 1:08:05 PM EDT> <Alert> <WebLogicServer> <BEA-000396> <Server lock has been requested by <WLS Kernel>>
    <May 26, 2009 1:08:05 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to SUSPENDING>
    <May 26, 2009 1:08:05 PM EDT> <Notice> <HTTP> <BEA-101278> <There are no active sessions. The Web service is ready to suspend.>
    <May 26, 2009 1:08:05 PM EDT> <Notice> <Cluster> <BEA-000163> <Stopping "async" replication service>
    <May 26, 2009 1:08:05 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    The server has to be shutdown and restarted and will run for a few days before repeating.
    Has anyone seen this behavior?

    I second hisaaks and mmeyers opinion.
    It is much discussed but documented and widely known (and though often thought to be not necessary) prequisite for OSB clustering. Compared to WLS clustering there some limitations.
    You can only have one cluster in a OSB domain, if there is more than one maneged servers you have to put them in a cluster.
    Like it or not, the product requires it. IMHO it is acceptable. My guess is that one reason for it are the uniformely distributed queues used within OSB.
    IMHO the real problems start, when you think about extending the cluster after creating the domain, then you have to manually set all these queues and distributed queues and JMS modules and everything that gets typically targetted for you by the domain wizzard. Or is there a solution for it yet? (Sorry to hijack your thread).
    regards,
    Barossa.

  • Home media server for mac, that you can also get to remotely.  Any ideas?  I am out of space on my macbook pro hard drive and appletv.  Need some sort of media server for delivery to macs, ipods, ipads, etc.  Any suggestions?

    Hi,
    I have been using my macbook pro as a home media server, hosting most content on the macbook with ipod touch, ipads, and appletv streaming/sharing content.  I have run out of space on both the macbook pro and the apple tv and am looking to moving the content to a home media server.  Any thoughts/suggestions?  I'd like something that I can access remotely too.  I have an old slingbox and also have a static IP address.
    Any thoughts/suggestions would be most welcome!

    Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

  • Server 2008 R2 DFS Drop Outs

    I have a problem with a Server 2008R2 running DFS, 3 out of 4 Folders drop out - I just can't figure out what on earth is going on.
    It is a Domain based DFS, the namespace is called 'dfs' - e.g.
    \\domain\dfs, I have 4 Folders called "MyDocs", "Home", "Shared" and "Software" - all of these have a cache duration of 1800 seconds.
    "MyDocs" is used with My Documents Folder Redirection, Home, Shared and Software are used with Group Policy Preference based drive mappings.
    The problem I have is the Home, Shared and Software Folders simply disappear, thus mapped drives become unavailable. The problem can occur as frequently as every 5 minutes or if I'm lucky, I'll get half an hour of solid reliable DFS usage.
    I half suspect I'm not having a problem with the MyDocs Folder because it's linked to Offline files and Windows 7 Offline Files uses background sync.
    One thing I will point out, the problem only surfaced after I upgraded my Lenovo laptop to Windows 7 Ultimate x64 SP1, it did not exist when I was running Windows 7 Professional x64 (no SP). Another laptop on the network (Sony VAIO - differnet
    WLAN NIC), it's still running Windows 7 x64 Professional (no SP), uses the same WLAN and it never has a problem.
    I have spent months investigating the potential for this to be a WLAN card (Intel Centrino 6200) and I have noticed other people reporting similar mapped network drive issues on the Lenovo forums (also using these Centrino model WLAN
    cards).
    The problem occurs almost immediately if I try to transfer a large amount of data over the WLAN, e.g. don't bother trying to copy an ISO as will cause the DFS Folders (Home/Software/Shared) to drop-out almost immediately and the copy borkes out. The problem
    does not occur if I transfer the same ISO over wired LAN ethernet.
    I can't get past the fact that this problem didn't occur when running Win 7 Pro with no SP1, I'm not 100% inclined to think this is a hardware or WLAN card issue.
    I have screwed around with WLAN drivers, power management settings etc etc etc, jack of that. It's achieved nothing.
    I have installed KB983620 but this has had no effect.
    A few things I have noticed:
    * When the DFS Folders come back online, the Application Experience service on the Windows 7 client has literally just (re)started. As a test, sometimes I'll manually restart it and the Folders will reappear almost immediately after (doesn't
    work every time).
    * Restarting the TCP/IP NetBIOS Helper Service can help force the Folders to come back online (also doesn't work every time)
    * Repeatedly browsing the still functional MyDocs DFS Folder (which never drops out) can help prompt the other DFS Folders to reappear (also doesn't work every time)
    * I have noticed when the 3 DFS Folders are not available via
    \\domain.local\dfs\, they will be available via
    \\domain\dfs and vice versa
    * If I run dfsutil /pktinfo - when the 3 Folders are unavailable, the TTL for Home, Shared, Software is sitting at 0 (MyDocs on the other hand is not, it's still counting down). When things are functioning properly, the TTL is counting down for all
    of them from 1800, when it reaches 0, it starts from 1800 again.
    Any ideas?
    Ben

    Hello Ben,
    From your explanation it seems it is wireless issue? can you look in to the event logs of the machine affected and see what event ID is being reported? Also, possibility might be DNS because you said it works with
    \\domain\dfs but fails with
    \\domain.local\dfs?
    Can you check your wireless settings to see what is the max data size that can go through if there are such restrictions
    Isaac Oben MCITP:EA, MCSE,MCC
    View my MCP Certifications
    Hi Isaac
    Thanks for the reply.
    At first and over the past few weeks I've been thoroughly investigating the possibility this is a Wireless issue. Messing around with drivers (Lenovo, Intel, versions, settings, I've tried it all). But there are some factors I can't ignore that lead
    me to think maybe this is not specifically a Wireless issue.
    The problem only started after I upgraded to Windows 7 Ultimate with Service Pack 1 - the problem never occured with Windows 7 Professional (no SP, both x64)
    When I first started troubleshooting I was using
    \\domain\dfs, but then I realised when I was having the problem I could still access the folders via
    \\domain.loca\dfs. Now I've realised it's a case of when fqdn is working, non-fqdn might not be and when non-fqdn is working, fqdn might not be and sometimes both are not.
    No specific events are being generated. Any suggestions?
    Any idea where I check max data rate?
    Thanks,
    ben

  • Music drop outs / stutter when listening to MP3s or Internet Radio with Verizon Media Manager

    Does anybody know when I play MP3s or listen to Internet Radio I'm getting slight drop out or stutter?
    I just downloaded and installed the Verizon Media Manager on a machine running Windows 7.
    Any help would be appreciated.

    Found this answer on DSLReports...
    "This problem has reported before. It's a problem with the audio driver for 7XXX boxes that was introduced with IMG 1.9a. It also impacts iHeart radio and Pandora streaming. It is supposed to be fixed in 1.9.1, which is due sometime in the next decade."

  • CS3 exporting drop outs and red screen flashes when exporting via Media Encoder

    Hi forum
    I have been using Premiere Pro CS3 for a long time on my dual core PC with no issues.  Suddenly, I am now getting a major issue i MUST get sorted asap for a client is waiting for the final video.
    It is a HDV (1080i, 25fps) project/timeline.  An 8 minute video has been put together in this and every time I try to export as either MPEG2 (Blu Ray) or WMV, I am getting pixelation in certain places usually around certain cuts, or horrible red blocky pixels filling up the screen for a second or two. They seem to come always at the same point.  They don't happen when i render the timeline or show up when playing the edit itself in the timeline - just when i playback the exported video in premiere or in Windows Media Player.
    To try a workaround I exported the whole video as high quality MPEG2 (blu ray - 30mbps), which I brought into a new sequence, then I exported small sections where this problem was happening as Uncompressed Microsoft AVI and called them "patch 1", "patch 2" etc. and brought them back in and overlayed over where the problems were occuring.  The short Uncompressed AVI patches seem to have exported with no glitches, so theoretically I thought I had a clean good timeline in my new sequence made up of the MPEG 2 video overlayed in the dodgy places with uncompressed AVI "patches".  However, trying to export a new MPEG 2 master from this has created the same problems, in the same places!!! Still drop outs and still those horrid red flashes filling the screen.  Not always as bad, and some places where there were problems are ok, but I am still left with most of the problems still there.
    I am now trying to export the whole video as an AVI uncompessed but dont know if this will work and will take a very long time.
    I do have Saphire plugins, but they are not being used in this new sequence so therefore could that be a possible problem?  I thought perhaps it was the brightness/contrast filter etc so removed that from some of the problem areas, and it helped on some of them, but not on others, so not sure its anything to do with my plug in or filters.
    Any help would be greatly appreciated.
    thanks, James

    This topic is about a year old, but I thought I would reply because I just experienced this problem very recently and stumbled upon an easy solution.
    Problem: When using Adobe Media Encoder to create an HD or .m2v video file, a bright red screen will flash followed by a mashup of red blocks/pixels somewhere within the file you've just encoded. This phenomenon lasts for exactly 10 frames before clearing up.  Most likely, you won't see this problem until you import the encoded file into Adobe Encore.  It shows up on the timeline, the preview monitor and the DVD itself. It occurs on edits that the system reads as being corrupt or when a flash bulb goes off from a still camera.  Both instances make the encoding process go haywire.
    Solution: Encode your HD or .m2v file with CBR (1-pass) bitrate encoding rather than VBR (2-pass).  Don't worry about losing any quality in your video or creating unnecessarily large file sizes with your new renders. I guarantee you won't see much of a difference, if any.  I can't explain why this solution works.  It just does.
    Hope this helps you as much as it did me.

  • Is it normal for my DL speeds to drop in half while streaming video off media server with E4200v2?

    I am on a 3MB plan and i noticed DL speeds drop quite a bit while the streaming from the media server?  is this normal?
    Also my Linsys ATA is on a static IP and when I review in Devices it will show offline though someone could be talking on the phone.  What would be causing this?
    Kind of new at all this stuff. Thanks in advance.

    There's a whole bunch of articles on the internet on DSL PPPoE MTU.  If you google "DSL MTU 1492", you'll probably find a lot better explanations than what I can give you....... 
    If you want to run the test in the link below, you'll find that 1464 is the mtu without fragmentation.  Then you add 28......and you'll get 1492.  
    http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=386

  • Can I set up a ps3 media server with OSX Mavericks with out additional software?

    I cant find any thing on the net about this. Does any one here know how I might set up my PS3 media server with OSX Mavericks with out additional software?

    You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
    Try control - clicking on it and see if you get an open option. If not, go to System Preferences/Security & Privacy/General and set it to 'Allow apps downloaded from' anywhere. For safety, you might want to change it back to something more secure.

  • Audio not streaming correctly from Flash Media Server

    Our company has a Flex application (3.0.2) that is having a problem with audio dropping out in Windows 7.  The problem appears worse with a wireless connection, but it can’t be consistently reproduced there, either.  The only thing known for sure is that the problem has not been seen on any other version of Windows.
    The application thinks the audio is playing, because it is calling the appropriate event listeners triggered when the audio completes and when any audio cue points are hit.  The majority of our audio is streaming via Flash Media Server (3,0,2,201), but the problem was also seen using embedded sound effects.  In one instance, several clicks of a button triggered an error saying the sound effect could not be loaded, and then about a minute later, all the sound effects played at once and the user could then continue with the application.
    The problem has been repeated in IE 8, Firefox 3 and Chrome.

    Thanks for your details. But i need more info.
    Server:
    FMS      3.0.2 ?
    FMS installed in which platform Linux/windows? more details about it.
    Client:
    IE          7
    Flash Player version     ?
    WIndows 7
    Wireless connection - Was the client placed in poor bandwidth.
    Can you get the NetStream status info when u play the audio file.? We can check for the rebuffering happening at the client side.
    Can you run your audio file through flvCheck Tool to check if the media file is in good form. It is available at "\$Root|Flash Media Server\tools\flvcheck.exe"
    Now our intention should be to check the same media file with simpler application (since your production app is complicated) to ensure that the media streaming over 'client to server' is working fine.
    Regards,
    Janaki L

  • Dynamic Link Media Server error - lost video reference file and can't replace

    I've had this problem twice in the last 4 days and both times it's coincided with an internet drop-out in the office. I've imported an uncompressed QT .mov into Audition CC, splitting the video and audio tracks, and added both to a multitrack session. I'm using the video reference track to sync SFX to an animation. The problem is that the video track stops playing in the video window, and Audition crashes. We've had problems with our internet connection and this problem occured when the internet dropped out. I wait for the internet to come back online and restart Audition, and get the following message:
    "This file can only be imported using the Dynamic Link Media Server process, but it is still starting and cannot yet be used. Please wait while the process initializes and we import the selected files."
    The app takes 30 seconds to load and my video reference track has disappeared and is labelled "Offline". I can't replace it in the multitrack timeline, even if I try to reimport the original .mov file into the project it only displays the file as audio with no video. I'm not using Premier and don't need to sync between apps, I just need Audition to recognise a video track on my local hard drive.
    FYI: I'm running OS X 10.9.1 with Audition CC and have turned on "Enable DMLS Format support" in preferences.
    Any help would be much appreciated as I'm thinking of reverting to Ableton!

    Terry Anglepoise wrote:
    Is this DMLS update ok for CC apps? RE: 10.9.1, looks like that update is for Mac Pro late 2013 machines, I'm running off a Mac Pro from 2010. Sounds like it wont be compatible?
    On the 'about' link it says at the top "The OS X Mavericks v10.9.1 Update is recommended for all OS X Mavericks users." Sounds pretty unequivocal to me. You'd need absolute confirmation from Durin, but I can't on the face of it see why the latest version of DMLS wouldn't be compatible with the previous version - IOW, it should be fine. If either isn't, then they should refuse to install. But with the way that Apple has screwed up Mavericks, in all honesty, all bets are off about that, and I'm glad that I'm a W7 PC user.
    I've wasted quite a lot of time lately fixing several ridiculous problems with Macs, including Mountain Lion's amazing ability to trash Wifi, etc, and quite frankly, I'm not impressed with them at all. So it's not blind prejudice, or even blatent bias this time either - FWIW I'm similarly underwhelmed with Windows 8.

  • After Effects CS4 and NFS Network Drop-Outs

    Hi all,
    We're experiencing a high number of NFS drop-outs ever since we've upgraded our department to AE CS4. I'm not saying CS4 is the culprit, I'm just saying this is when we started noticing the issue.
    13 Apple MacPro 8-core systems. 12 Leopard, 1 Snow Leopard.
    Projects are located on an Apple XServe 2.26 Quad-Core Xeon with 12GB RAM running 10.5.8 Server
    Projects are shared up via NFS protocol via gigabit network.
    Basically throughout the day, a random number of peole will lose connection to the NFS share, to which it returns on its own in a few moments. Though it's not everyone each time, all users encounter the issue at least once-a-day, usually more. (We have to different servers with NFS shares, one does not drop, the other does) The server that drops the share is the newer XServe Leopard and is the primary server where all the footage and projects are located. The 2nd server is just secondary library media and stock footage...
    Essentially, I'm curious if anyone else is having NFS issues since the update to CS4. I'm just trying to weed out all elements. It's hard to say if it's the server itself, as the logs only note a drop once-in-a-while... We also use Rush Rendering for our Maya renders, which we have just upgraded to the latest version and we get drops even when no one is using Rush or Maya...
    Very strange but extremely frustrating issue. It's not fun when someone is working on a project and loses it because the share drops out.
    Any input greatly appreciated. Let me know if you need more info.
    Thanks!

    Session timeouts.... I really do think it's the server. AE doesn't care for specific network stuff, it's all just volumes/ drives to the program. To avoid these issues, you would have to shorten the refresh cycles on your server availability broadcasts or the "keep alive" cycles on the connection/ session settings themselves. I'd know how to do it on Win Server, but I have no clue with regards to XServe configuration. Still, certainly some simple console commands and a restart of the server software should be able to take care of the matter.
    Mylenium

  • WRT610N UPnP Media Server failing after minutes online

    Hi,
    I have a WRT610N and I'm having issues with the media server. I have upgraded to the latest firmware and setup sharing and UPnP etc. When I initially plug in my USB hard drive (1TB Seagate Freeagent) it is discoverable by devices on my network (Xbox 306 & Linksys Kiss1600) and I can browse shared media it has indexed. This only lasts for less than 5 mintues, then the WRT610N dissappears from both devices (Xbox & K1600) and I can no longer use the media server.
    Disk sharing still works OK, it's only the media server that fails.
    Any help would be really appreciated as I'm about to launch it out the window.
    Thanks,
    James

    Are your devices connected to the media server via a cabled or wireless connection ?
    If its wireless - then i suspect you have a faulty WRT610, the wireless chipsets inside the WRT610N are well known for overheating and dropping all connections.
    Should be pretty stable using a cabled connection though.
    Message Edited by vatovey on 07-20-2009 08:35 AM
    Currently owning a WRT610N v1

  • E3000 external storage and media server problem

    I have connected my LaCie rugged drive to the router and would like to use it as backup storage and as a way to stream video to my PS3.
    When I go to my advanced settings for the router and go to the storage heading I can see my LaCie and its specifications.  There is a button next to it that says "claim", which I press, but nothing happens.
    I don't have the option to create a shared folder, and I can't access the drive from my Mac.
    Does anyone know what I'm doing wrong here?
    On a somewhat related note, I've enabled the media server and can find it on my PS3, but there is nothing in the root folders.  How do I put stuff (movies, music,etc.) into these root folders? 

    Thanks, that did help.  I attached a different drive to the router and was then able to create a shared folder.
    I can now see the shared folder on my Mac.  I open this folder and there's the icon with my network name.  I double click on the network name and I get a popup with the following message:  "Select the SMB/CIFS shared volume you want to connect to." and then a drop down box with the name of the shared folder I created and a public folder.  I select the shared drive I created and click OK.
    I then get another popup with the following message:
    SMB/CIFS File System Authentication
    Enter the workgroup or domain and your user name and password to access the server.
    Already filled out in the Workgroup or Domain is the name of one of the folders I created on the share drive.  Under username is my name and password is blank.  I enter in the password for the network and click OK.
    I then get the following message: The alis "'my network name'" could not be opened because it could not be found.  
    and then the message gives me the following options:
    Delete Alias
    Fix Alias
    OK
    It won't let me delete the alias
    I've tried fixing the alias, but when I click on the option to do this, it just takes me to my file folder structure and asks me to choose a file.  I'm not sure what I should do here.
    Any idea on what to do so I can access the shared folder I created?
    Also, on our other computer which runs windows I'm not sure how to create a root folder.  How do I do this?

Maybe you are looking for