EA series 4500 and 6500 routers disconnecting once per day, everyday at the same time

I have had an EA4500 and EA6500 have the following problem:
I have time warner cable internet, Motorola SB6141 modem.  The modem connects to an Ooma Telo.  The 4500 and then 6500 are connected to the ooma.
I have this problem when the routers where placed in front of the ooma as well.
1 time per day, always at the same time, the router stops working.  for both wired and wireless connections.  i need to unplug the router to work.  The modem and ooma continue to work, so i know there is internet getting passed from the modem to the ooma. However, the internet gets disruptted with the routers.
this must be a settings issue with the router.  where everyday at the same time, maybe when timewarner changes over or something the router does not pick it up?? i dont know. i have gone through 2 routers and same identical problem.
thanks.

The DHCP lease time from your ISP might be set on that time that is why 2 routers are behaving the same way. And the routers may not be renewing the ip address successfully, that is why you are losing the internet connection. What you can do is to clone the mac address and you can do that by accessing the router page.
If you are using the linksys smart wifi interface, go to connectivity > internet settings > click on clone my pc's mac > click on apply.
You may also check this site for more information about intermittent connections with the router:
How To: Fixing Router Intermittent Connection Drops
http://www.smallnetbuilder.com/lanwan/lanwan-basics/24437-howtorouterdrops

Similar Messages

  • I have just signed upfor family sharing. Is there any way you can get the same app on two devices but not have to share it? My sons both want clash of clans but they don't want to be on the same village and they can't both be on app at the same time?

    I have just signed up for family sharing. Is there any way you can get the same app on two devices but not have to share it? My sons both want clash of clans but they don't want to be on the same village and they can't both be on app at the same time?

    hi, the app is not "shared", it works as if you bought the app twice with different accounts, only you paid it once. they should have 2 different villages since they're on 2 different devices.

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • How far will the extreme reach and how many users can be on there at the same time?

    How far will the airport extreme reach and how many users can be on there at the same time?

    Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
    The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
    A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
    But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
    So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
    Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
    The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
    If you find that the signal does not reach as far as needed,  you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

  • Outlook and owa freezes every day, sometimes at the same time

    Hello,
    I have very strange problem! 2 users complain that the outlook hangs every day, approximately at the same time. But other 200 users work fine. I can't see any error on the mail servers ( two servers exchange 2010 sp 3 with dag) Outlook can hangs for 15 min
    with user, who has mailbox 1,5 Gb and about 3-5 min with user, who has mailbox 150 Mb.
    When outlook hangs, owa logon also hangs and then they start working simultaneously.
    It doesn't depend on the server where I try to run owa. I tried to move mailbox to new database, but it didn't resolve my problem.
    There are no any scheduled tasks on exchange servers at this time. No performans issues. Maybe some problems of connectivity with AD, but I don't see any suspicious event.

    Hi,
    It sounds like mailbox curroption. I'd suggest you move those two mailboxes to another mailbox database, and then try againt to see if this works.
    We may also try New-MailboxRepairRequest. For more information, please refer to:
    http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
    http://blogs.technet.com/b/nawar/archive/2010/08/19/exchange-2010-sp1-new-mailboxrepairrequest.aspx
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • I have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

    i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

    i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

  • Microphone and what U hear can not be use at the same time at the same time

    I am using Creative SB X-fi Xtreme Gamer (Creative Model Number: SB073A), sound card and have down loaded the latest drivers (version 2.18.15). What U hear is enabled, which in turned makes the microphone unavailable. If you reverse the settings, then what U hear is unavailable.
    It appears that; microphone and "What U Hear" can't be enabled at the same time. If someone has an answer on how to correct the following settings to achieve; using the microphone and what U hear at the same time would be appreciated.
    My OS is WIN 7x32

    It was possible in Windows XP but due to windows 7 own audio mixer this does not work anymore.

  • I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

    I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

    Well this is not a problem I have already bought one, my great worry is the processor and the memory..

  • Recently my iPad3 and iPhone5 stopped synching automatically to iCloud. Around the same time I backed them both up to my Macbook Pro and installed the iOS6 update. Any thoughts or help is appreciated!

    Recently, I noticed that my iPhone5, iPad 3 and iPod Touch 4th Gen stopped backing up to the iCloud automatically despite ALL of them doing so previously, without a single problem. A few weeks ago I bought a Macbook Pro and I backed up all 3 devices to it a couple times (and they still backed up to the iCloud by themselves without a problem). A few days ago, I noticed that ALL 3 OF THEM stopped backing up to the iCloud automatically. Around the same time, I backed them up to my Mac and I also downloaded the iOS6 update. I'm not sure what is wrong. Has anybody else experienced this type of problem? I'm NOT very familiar with MAC computers as this is my first one and I've been learning a lot as I go. I don't know if I did something in the setting's of iTunes when I backed the devices up that could have caused the decives to stop backing up to the iCloud automatically. I did notice on my previous laptop (a Gateway) and on this one (the MacBook Pro) that on each device, I had to go into "Setting's" on each device and turn the "iCloud Backup" back to the  "On" position! That was right after I backed them up to each computer. I attempted to fix it yesterday by adjusting the setting's in iTunes, but nothing worked. If anyone can help, I would sincerely appreciate it. Thank you!!!

    Ok, I can try those things this afternoon. I have to leave now and won't be able to try for several hours. I'll let you know how things turn out. Thank you again. Also, I am not sure what DNS Setting's are regarding the router and how to change them. Thank you again for trying to help me with this. One side note. I noticed yesterday on another post regarding this topic, a man said he changed his iCloud email from one to another. I have two. One is and @me.com address and one is an @icloud.com address. I switched them around the other day. One device had @me.com as the one the email one be sent from (I think that was the phone) and I believe the iPad 3 had @iCloud.com as the other. Well, I switched them both to @icloud.com. In the post I mentioned a man said that he did that to his, and it worked. That was a few days ago and this was around the same time I began noticing the devices not synching to iCloud like they should. Right now I have for the iCloud email account (on both the iPhone and the iPad) @iCloud.com as the setting that any emails from that account would be sent from and the @me.com is also turned to the "On" position on both devices. I figured that if I'm sending an email from an iCloud account it should say "@iCloud.com" after it rather than "@me.com" after it. I just did that so everthing was the same on both devices and out of personal preference. No other reason really as I don't ever use the account to email anyone and have never given either address to anyone. Only Apple has them and they sent a couple things initially and I never receive anything on that account (for the most part). Ocasionally I get something from Apple and that's a rarity. I don't know if that may factor in at all or not. It did for one gentleman. Thank you randers4!

  • My iMac was running BitDefendwr scan and I tried logging into my online banking at the same time...it froze I had to do a hard restart now it is so slow it is useless. I have Safari5 an latest Snow Leopard. Anybody have any ideas?

    My IMac is so slow after having to do a hard restart. I have BitDefender 2011 for Mac and it was running a scan when I tried logging into my online banking. At the same time, I accidentally hit "update" on the Bitdefender icon to update the latest virus and malware definitions. Now my iMac is slow and useless. I have iOS5 and the latest Snow Leopard. Help please!

    Before we get too far, please clarify this part:
    I have a 2009 iMac 4,1
    A 2009 iMac cannot be an iMac 4,1; they are 9,1 and higher. Did you mean to type "2006?" That would be an iMac 4,1. We need to pin down the model issue before proceeding.
    It could be the drive, not the disk, that is dirty. Try a drive cleaning disk, usually about US$5-15 at home entertainment, electronics stores and office superstores

  • HT5525 I am ordering 27 seperate books for my class.  I am a teacher.  I dont want to have to pay the shipping cost for every book.  Is there any way I can pay one shipping cost and you can send me all th books at the same time?  Thank you.  Linda Gleichm

    I am a teacher and I am sending 27 books to be published.  I don't want to have to pay postage on each book.  Can you send them to me all at once and just charge me one postage fee.  I can't aford to pay for postage for each child in my classroom.  Thank you.
    Linda Gleichmann

    1 - we are users just like you - so not we can not do anything about bulk shipping
    2 - Apple printing policy is that only multiple copies of the same (identical) book can be ordered in one order with one shipping charge - if you are ordering 27 copies of the same book then there will be one shipping charge for the order - if there are different bookd then there will be a shipping charge for each different order
    see http://store.apple.com/us/help/print_products for more information
    LN

  • Time Capsule - Can it run as DHCP router, create a wireless network and plug into switch for wired network all at the same time?

    I have a closet with Wired connections from all over the house terminating in it. I also have the internet modem and a switch in this closet. My old setup was a netgear in the closet creating a wireless network and also feeding the Ethernet ports all over the house. In my room, I had an Airport express (a month old) bridging the wifi to make the wifi network larger. The Express was hard wired from the wall and my mac mini was using it's wifi (printer was plugged into other ethernet port). Everything was working great.
    Fast forward to last week. My Netgear died. So, I bought a time capsule. My plan was to move the Express to the closet and have it create the wifi network and also then run cat 5 cord from express to the switch to feed all the wired wall plugs. Reset it and set it up to create the wifi network as well as DCHP NAT. Wireless was running great on it. Then I plugged in the Cat 5 in the second Ethernet Port to the switch. Wifi stopped working and none of the computers would connect using wired connections either. They would see a 'network' but nothing would work. I would unplug the Cat 5 feeding the swtich and the wireless would start working again. Plug the Cat 5 back in and wireless would stop.
    So I thought I would try the Time Capsule in the closet and see if I could get it to work. Pretty much the same thing, except at this point I figured out if I went in and told it NOT to create a wifi network the wired portion worked fine and all the wired computers in the house worked fine. Of course, then I didn't have Wifi.
    I'm not clueless when it comes to networking, but I can NOT figure this out! Can either the Time Capsule or Express Create the wifi network AND also feed the data to the switch for all the wired computers?
    To simplify this is what I want my end result to be. I prefer the Time Capsule to be the wireless connection extender, but if I have to have the Express do it, I'm fine with that.
    1. Express in the closet creating the wifi network as well as feeding the data to the wired connections via my switch.
    2. have the Time capsule in my room at the opposite end of the house plugged into the hard wired connection to extend the wrieless network as well as have wired connections such as my printer and my Mac Mini.
    If I can get #1 to work, I don't think I'll have any problems with #2. Help!

    I have an equally complex setup with a managed switch actually but I have never seen the TC have this kind of issue.
    What I do notice is you have changed the TC from defaults.. you are using a non-default IP range.
    I have run across issues like this where people move things from default.
    I would like you to start over.. factory reset the TC. That will set it back to default router mode.
    Do the min setup on the TC..
    1. Change all names from what you were using. That includes the TC name and wireless name/s
    Make them short, no spaces and pure alphanumeric because that is the correct way to network. Apple default names with spaces and apostrophes are fundamentally bad.
    2. With just the TC plugged into the switch.. and a single computer connected by ethernet. Power cycle the whole network.. this allows the switch to clear all the old MAC address.
    3. Test on the computer just ethernet. Turn the wireless off.
    The computer must use dhcp and must get an ip from the TC.
    It has to get the correct Router.. ie Gateway.. I wish apple could stick with proper network terminology.
    And it must get same address or valid DNS server address/es.
    If it fails.. please plug ethernet directly to the TC.. bypassing the switch.
    You should get the standard IP addressing and internet connection.
    If not please post the screenshot from the Mac of the network preferences showing the ethernet setup.
    I need to see what address it does get. I need you to make sure the ethernet is the TOP of the list. So rearrange the order of network connection. With the airport off it should just go to the top of the list.
    If it appears to be working .. but a browser cannot connect, open a terminal and ping an internet address.
    Ping the actual gateway address the ISP gives you and ping the ISP dns address.

  • At least once a day, I get the same message, one stating that a web site is a forgery. Fine, block it. But how do I turn off the recurring message?

    The website is static.australianbrewingcompany.com. It was popping up daily. I never clicked on it, just deleted it. Installed AdBlock Plus 2.4. Don't see the website any more but do get a message every day stating that the website is a reported forgery. I agree, but I don't need to see the message every day. It's distracting when I'm trying to work (I'm a B@B writer). So, how can I leave the block in place, but not see the message every day?

    Hi ComputerWhiz, I'm suspicious about what is causing Firefox to try to load that page in the first place. That's why I suggested checking for malware.
    Hi RichardGregory, can you associate the attempted visit to the site with anything in particular, such as first opening Firefox, or visiting a specific other site, or a particular time of day?
    Over the course of the year, we've seen malware that adds a scheduled task to Windows to launch ads at a particular time of day, and we've seen malware hack the Firefox program icon on the desktop to open a specific page when you double-click it, so that's why the additional information would be helpful in getting to the bottom of it.

  • Apple care is useless in India. I bought an iPhone 5 from a Maple store in June 2013.  Also got convinced at the store and purchased an additional Insurance worth Rs 1000 at the same time. The iPhone 5 has a very poor battery life. Needed to be charged at

    Apple care has been of absolutely no help to me. My 10 month old iPhone 5 stopped charging one fine day and Apple denies any responsibility for  the same. Between my Family of 4, we Re currently using 5 Apple devices. Am so disappointed with the service from Apple. Although my cell phone is well within the warranty period , I have been denied a replacement. And the Shield Insurance that I purchased is now declining the insurance amount even. They insist I prove that it is an accidental damage. And Apple refuses to cover what they choose to call a 'physical damage'. So where does that leave me ?!

    I cannot see the damage. But the screening centre has pics showing it is damaged. Apple refuses to cover a physical damage. But the reason the device is damaged could only be coz it had a poor battery life from start. The iPhone 5 is infamous for the same. We all know it. Apple conveniently denies responsibility.
    And the Insurance company says it covers only accidental damage. Now how am I to prove an 'accidental' damage ? Unless I lie to them....

  • My ipod was stolen and my hard drive quit on me all at the same time.

    so i got a new ipod and i backed up all my itunes on a cd but i still dont have any songs in my itunes, any help?

    no its the same computer actually. is it as easy as just putting the disc in and itunes extracts it? or is it possible that i backed up my files wrong? and if so can itunes give me my music back?

Maybe you are looking for

  • MBP AC adapter "handles"

    Hi, I searched the forums but I can't seem to find an answer. what is the purpose of the two little "hooks" or "handles" that flip open on the sides of the macbook pro AC power adapter... they look like they are used to hook something or for suspendi

  • HELP! Convert .mts files for Final Cut Pro 6

    Please help! I am a broadcast/video production teacher in California and we are struggling. I just bought some Canon R10s to go with our F200s. We edit on FInal Cut Pro and we have 20 G5, PowerPC Macs. How do we convert the video so we can edit in Fi

  • Full Disk!

    hello, ive been having this problem for like the last couple months. i keep getting notifications that my startup disk is full or my hard disk is full. these notifications come up sooo many times and sometimes one right after the other. ive read thro

  • I need help with the adjustment brush.

    When I first started using Lightroom, the adjustment brush worked fine. Now, I will select the adjustment brush, click on the photo I'm editing, and a red circle will appear depending on the circumference I chose. If I look at the thumbnail in the na

  • SAP C4C DATA SOURCE FINDING

    Hi, My Requirement is that I have List of some C4C Fields( These are standard fields) and I am looking to find out that which field is belongs to which Data Source ?  Do we have any search option like Data source field wise search ? Regards, Rohit Tr