EA1 - Ability to use Search option and code collapse/Expand option in ...

Noticed the following feature which was Scheduled for Release 1.5 is missing.
"Ability to use Search option and code collapse/Expand option in the Normal mode of PL-SQL Editor"
This feature could save a lot of time on code reading/review/....
Thanks,
K.Nataraja Suthan,

You can use the search on the read only (normal mode) of the PL/SQL Editor. Either through menu or using ctrl F.
The other is still an enhancement and is being tracked.
Sue.

Similar Messages

Ability to use u0093Globalu0094 queries, and modify/save them u0093Locallyu0094

Hi,
I have one requirement of Creating Role with RRMX Tcode, to Ability to use Global queries, and modify/save them Locally for their own use. Ability to Create & Modify Local queries for their own use.
I have tried with all combination but still not able
to save any query(global or local) as local queries by using the option "change query(Local view)",Where as if we do changes in the global queries default its getting saved under global only.
We are unable to restrict only for Local changes.
Let me know in the object name and what value need to add there.
Regards,
Deepak

Hi Bhanu,
I have tried to find the option for the local and Glabal, but did not got any thing. May be my functional consulatant can find out.
Can you please let me know the exact object name and the value, i have mainatined Object S_RS_COMP and S_RS_COMP1 and the value 01,02,03,16.
Rgds,
Deepak

Error using 'Search' option in Planning.

Hi,
when i expand my webforms list on the left side of the Planning interface i am able to see all the folders expected.
on selecting one of those folders say 'x' i get a list of forms under 'x' which is fine .
But when i type the name of webform which is placed under folder 'x' in Search option which at bottom right side of the planning interface,
I get an the error ' exception occured. you dod not have sufficient access to view this page'.
But the point over here is if i am able to see and access the webform while searching for same webform why i am i getting this error.
can anybody help me on this?
Thanks
NJ

Hi,
when i expand my webforms list on the left side of the Planning interface i am able to see all the folders expected.
on selecting one of those folders say 'x' i get a list of forms under 'x' which is fine .
But when i type the name of webform which is placed under folder 'x' in Search option which at bottom right side of the planning interface,
I get an the error ' exception occured. you dod not have sufficient access to view this page'.
But the point over here is if i am able to see and access the webform while searching for same webform why i am i getting this error.
can anybody help me on this?
Thanks
NJ

How to use search option using TREX.

How can i have a search option in the portal page where in a user types for some keyword and the results are displayed accordingly.
Thanks
Shreya....

Shreya,
http://help.sap.com/saphelp_erp2005/helpdata/en/72/b595166625664fbdc110d54639f27b/frameset.htm
Maybe that link will help.
Regards,
Keith

SQ01 help for listing not used problem codegroup and code in notifications

Hi ,
I am making a query through SQ01 to find out how many damage codes created for a particular notification type are not being used .
In infoset I used QMEL which lists problem code group and problem code and as a bonus we also get codegroup text . When I test this query , I get damage code group and code used in all the notifications . I want solution for the following
1)How to list only distinct damage codegroup and damage code (Not per notification wise)
2)Which second table I have to use to get problem code short text
3)Which table I have to add in infoset and how join has to be created so that I get list of Damage codegroups and codes not used in notification .
NPB

Hi Pete ,
1)How to list only distinct damage codegroup and damage code (Not per notification wise)
        I have output like
                  problem code group     Problem code grp text        Problem code    Problem code text
                  MRTR                           Transformer problems        1                        I need table here
                  MRTR                            Transformer Problem           1
                  MRTR                            Transformer problem         2
I need distinct output like
problem code group     Problem code grp text        Problem code    Problem code text
                  MRTR                           Transformer problems        1                        I need table here
                  MRTR                            Transformer problem         2
2)Which second table I have to use to get problem code short text
                I need problem code table
3)Which problem code group and code not used
            Suppose for notification type X I have configured damage catalog Q and Q has MRTR , MRAM , MRGT as code groups and each of them have their own codes (say 1 to 5)...If notifications are created only for MRTR and code 1 , 5
I need not used output like
MRTR 2
MRTR 3
MRTR 4
MRAM *
MRCT *
How can I achieve this using sq01,02 etc
NPB
Edited by: Narasimha Bhat on Feb 1, 2011 4:54 PM

When I perform a search on orkut using search option and when I try to open the listed options in search results it says loading orkut and shows a loading bar and....nothing happens....while it works with other browsers...pls help

firefox 3.6.10

Install, update, and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. '''''(Not all programs detect the same Malware.)'''''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

Ability to use the FFT and phase analyzer in Multitrack mode

This will be very convenient while recording and mixing. Also, in edit mode it would me much more flexible to have an effectsrack (like the masterrack now) with the ability to go to certain parts in your song with the chosen effects still worlking, instead of being dependant on an earlier determined selection and a play button. eg the same behaviour as in the multitrack mode.

You can use the search on the read only (normal mode) of the PL/SQL Editor. Either through menu or using ctrl F.
The other is still an enhancement and is being tracked.
Sue.

Unable to access files using search title and link

Once a list of search results appears, I am unable to retrieve the referenced document using either the hyperlink title or "link" hyperlink. I can only access the document using cache. Does crawler configuration need to be modified?

file://localhost/dbadmin
And here is the error message that appears when the title hyperlink is selected:
java.io.IOException: \dbadmin\projects\NMAX_Refresh\Requests\NMAT_20050329\mtch_users_synonym.sql is not an acceptable relative path when user.dir is C:\ORACLE\PRODUCT\10.1.6\SES1\ at oracle.aurora.java.io.OracleIO.transformRelative(OracleIO.java:65) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.(FileInputStream.java:103) at oracle.search.GetPage.readFileURL(GetPage.java:958)

Search help and Match code oject

How to create the search help in version 5.0 and 6.0 ? what is elementary search help,collective search help? what is the use of these search helps? where we use elementary and collective searsc helps? what is the difference between searc help and match code object? how to use in reports?where we use search help and F4IF_INT_TABLE_VALUE_REQUEST function module? what is the diffference between them?

Hi Rk,
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Thanks,
Reward If Helpful.

Blueprint shouldn't use entire lines of code as the search string.

If I have the editor open on some MXML code, and a range of characters is selected in the editor, then invoking Blueprint uses the selected text as the search string. This seems like the right thing to do.
However, if there is NO text selected, Blueprint uses an entire line of code as the search string (whatever line the insertion point happens to be in). I my experience this is almost always wrong, because (a) most lines of code e.g. "}" or "allPanels[1] = new LayersPanel();" or "private var allPanels : Dictionary = new Dictionary(); do not usually produce very useful search results, and (b) because these strings clutter up the search history.

Thanks for the suggestion!
We will reevaluate the use case for using an entire line of code as a query.
Mira Dontcheva
Research Scientist
Adobe Systems

Why does search option in history doesn't work? It does not display any sites I've been to.

I enter history, type a name of a site I've been to in 'search' or 'find' field (I'm using polish version so I don't know the exact name of that field) and it does not find anything. I haven't cleared my history, it's all there when I open 'today', 'yesterday' etc. tabs. Only finding it using search option doesn't work.
It used to work fine now it doesn't. I haven't installed anything.

Make sure that you're not running Firefox in Private Browsing mode.
https://support.mozilla.com/kb/Private+Browsing
You enter Private Browsing mode if you select:
Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History and Cookie settings, choose:
Tools > Options > Privacy
choose the setting Firefox will: Use custom settings for history. Deselect:
[ ] "Permanent Private Browsing mode"

Search option in BI 4 launch pad is not working

Hi everyone
we are working in BI 4 Launch Pad, and we are facing an issur when we try to use vthe search option, the error message is
"An error occurred while searching: Index is not ready. Please try again later(PAA 01004)"
i have found one note in SAP Notes saying that the SAP will solve this issue in BI 4.1, but we need this to be solved in BI 4, many users are asking to use search option,so any one can help if there is any workaround.
many thanks

Hi Friends,
We faced the similar issue. Found SAP Note 1634413 http://service.sap.com/sap/support/notes/1634413 which resolved the issue for us. I have pasted the resolution below;
Resolution
Go to CMC->Application-> Right Click 'Platform Search Application'->Properties
Scroll Down and select the option "Rebuild Index", save and close.
Let the index rebuild for few hours (depends on the amount of content).
Please see if this is helpful to any of you.
Regards
Piyush

Screen orientation rotating randomly, ability to use touchpad/keyboard disappearing randomly.

On occasion, for no apparent reason, my screen will rotate to any orientation. I have to put it into, and out of, sleep mode in order to get the orientation back to where needed.
Also, on occasion, for no apparent reason, I lose the ability to use my touchpad and keyboard, and need to use the touchscreen in order to do anything. I also need to put it into, and out of, sleep mode in order to regain use of the touchpad and keyboard.
I've updated all software and drivers out of frustration, but nothing has helped. Help!!

I have a ThinkCenter All in One Desktop - this exact problem is happening to me year three into owning it. I've unplugged the mouse, the keyboard, installed new drivers, uninstalled drivers, bought and returned mouse - and all of my equipment is attached, so there is no bluetooth to place the blame
did anyone find a solution to this problem on their own before i have to spend more time calling Lenovo directly?

Need sample code to do text search using boolean operators AND OR + -

I'm looking for an algorithm doing text searches in files
I need it to support AND OR + - keywords (for example "ejb AND peristence")
Does anyone knows where I cand find this kind of algorithm with the full source ?
Of course I can adapt C,C++ to Java.
In fact my target language is Serverside javascript (sorry) so I prefere rather low level solutions !
Any help will be grealy appreciated and the resulting code will be posted
here and on my website : http://www.tips4dev.com

Firstly, a little note to the technical solution: what you probably need the most is speed. I may sound strange, but personally I am convinced that if you could use system tools a naive algorithm:for i:=1 to m do
grep (word)
od; whose complexity is O(m.n), where m is the number of words to be processed and n somehow represents the cardinality of the text to-be-sought-through, so this naive algorithm would actually be in 99% of cases much faster than any implementation of the algorithm below, whose complexity is O(m+n), because the implementation of the grep routine (O(n)) would be optimized and m will be low (who queries 153 words at once?)
Anyway, you asked for an algorithm and you'll have it. It is quite elegant.
Aho, A.V. - Corasick, M.V.: Efficient String Matching - An Aid to Bibliographic Search, Communication of the ACM, 1975 (vol. 18), No. 6, pg. 333-340
[i]The task: let's have an alphabet X and a string x = d1d2...dn (d's are characters from X) and a set K = {y1, ... ym} of words, where yj = tj,1 ... tj,l(j) (t's are again characters from X).
Now we search for all <i, yp> where yp is the suffix of d1...di (occurences of the word yp in x)
(note: if you want to search for the whole words tj,1 and tj,l(j) must be blanks)
The idea of the algorithm is that we first somehow process words yp to construct a search machine and with this machine we will loop through X to search for occurrences of all the words at once.
Example:
K = {he, she, his, hers}
X = ushers
search machine M(Q - set of states, g - "step forward" function, f - "step back" function, out - reporting function):
(function g)
0 (initial state) h-> state 1 e-> state 2 r-> state 7 s-> state 8 ... for {he, hers}
state 1 i-> state 6 s-> state 7 ... for {his}
state 0 s-> state 3 h-> state 4 e-> state 5 e ... for {she, he}
And for all the characters is defined 0 x -> 0
Now, in
(function out)
state 2: report {he}
state 5: report {she, he}
state 7: report {his}
state 9: report {hers}
"Step back" function f for this particular set of word would be:
9 -> 3, 7 -> 3, 5 -> 2, 4 -> 1 otherwise the machine would return to the initial state 0
Processing of ushers will look like:
<0,0> u-stay in the state 0 <1,0> s-move to state 3 <2,3>, <3,4>, <4,5> state 5-report (he, she}, cannot move forward -> must step back (like if "he" was received) <4,2> r-move to state 8, <5,8>, <6,9>
Before we show how to construct the searching machine M (Q,g,f,out) let�s consider the algorithm how to use it:
Alg 1.begin
state:= 0;
for i = 1 to n do
//if cannot move forward, move back
while g(state, di) not defined do state:=f(state) od;
//move forward to a new state
state:=g(state, di);
//report all the words represented by the new state
for all y from out(state) do Report(i,y) od;
od
end.
Alg 2. � build of the �step forward� function g and an auxiliary function o that will be later used for the construction of outvar q:integer;
procedure Enter(T1�Tm);
begin
s:=0; j:=1;
//processing a prefix of a new word that is a prefix of an already processed word too
while j&ltm and g(s,Tj) defined do
s:=g(s,Tj); j:=j+1;
od;
while j&ltm do
q:=q+1; //a new state � global variable
define g(s,Tj) = q; //definition of a single step forward
s:=q;
j:=j+1;
od;
//the last state must be a state when at least the processed word is reported
define o(s) = [T1, � Tm];
end;
begin
q:=0; //initial state
for p:= 1 to k do Enter(yp) od;
for all d from the alphabet X do
if g(0,d) not defined then define g(0,d) = 0 fi
od
end. Alg 3. � build of the �step back� function f and the reporting function outcreate an empty queue
define f(0) = 0; out(0) = {} //an empty set � we expect words of the length 1 at least
for all d from X do
//process children of the initial state
s:=g(0,d);
if s!=0 then
define f(s) = 0; //1-character states, if we throw away the first character we return to the initial
define out(s):=o(s); //report 1-character words, if any
move s at the end of the queue
fi
od
while queue not empty do
r:= the first member of the queue; remove r from the queue;
for all d from X do //process all the children of r
if g(r,d) defined then
s:= g(r,d); //get a child of r
t:= f(r); //f(r) has already been defined
while g(t,d) not defined do t:=f(t) od;
//we found a state from which g(t,d) has sense
define f(s) = g(t,d);
define out(s) = o(s) UNION with out(f(s));
move s at the end of the queue;
fi
od
od
Processing of a query � normal forms
Until now we have solved the problem how to search for multiple words in a text at once. The algorithm returns not only not only whether a word was found or not, but also where exactly a word can be found � all the occurrences and their locations.
However, the initial task was slightly different: procession of a query like �X contains (y1 AND/OR y2 � yn)� In order to decide a question like that it might not be necessary to find all the occurrences of given words, actually not even an occurrence of all the words (e.g. word1 OR word2 is fulfilled as soon as either word1, or word2 is found).
Let�s suppose that a searching query is given in its disjunctive normal form (DNF):
A1 OR A2 OR ...Ak where each of Ax = B1 AND B2 AND ...Bkx and Byz is a statement �X contains yp�
Now, the query is successful whenever any of Ax is fulfilled.
(I don�t know how much you know about transformation of a logical formula to its disjunctive form � it is quite a famous algorithm and can be found in any textbook of logic or NP-completeness. I hope that evaluation of the formula, which is what happens in the procedure Report of the algorithm Alg. 1, is trivial.)

How to use auto-increment and search option for MS Access DB

Dear All,
I have configured our invoice in Adobe Livecycle and connected it to MS Acess 2007 as per http://forms.stefcameron.com/2006/09/18/connecting-a-form-to-a-database/.
All is working fine, I can insert, retrieve data from DB to invoice and vice versa.
Now I want few things to be implemented on our invoice.
When ever I open our invoice, it populate the first entry from DB, Is it possible to populate the last entry ?
Auto increment invoice number from MS Access DB every time we open our invoice after save.
How to implement search option from DB for invoice number ?
Please let me know if someone can provide me help on my scenario, so that I can share more stuff related to invoice and DB.
Look forward to hearing soon from experts and other team members.
Thanks & Regards
Riyad...

As far as I know there is not any auto increment data type in Oracle. Instead of this you should create a sequence and get the next value of the sequence while creating a row in your table.
CREATE SEQUENCE Test_Sequence ;
CREATE TABLE Test_Table ( Id NUMBER , Foo VARCHAR2(4) ) ;
ALTER TABLE Test_Table ADD CONSTRAINT Test_Table_PK_Id PRIMARY KEY ( Id ) ;
INSERT INTO Test_Table ( Id , Information ) VALUES ( Test_Sequence.NEXTVAL , 'FOO' ) ;

EA1 - Ability to use Search option and code collapse/Expand option in ...

Similar Messages

Maybe you are looking for