EA1 - bug: worksheet not updated when switching between tables of same name

Consider this scenario: two schemas, A, B. Each schema has a table X.
Look at A.X data by selecting A/Tables/X in the connection list and clicking the Data tab.
Now immediately look at B.X data by selecing B/Tables/X in the connection list.
Bug: the worksheet viewer does not switch to B.X, but still shows A.X.
Workaround: Click to another table before going from A.X to B.X.

I had the same issue (bug: showing data in tables with same name, 2 different databases but I can't reproduce either...
K.

Similar Messages

Yosemite 10.10.1 - DNS cache does not clear when switching between WiFi networks

Before updating to Yosemite, DNS caches would clear when switching between WiFi networks, as they should.
For Example, when using an Exchange server, your server name might be something like mail.company.com. Outside of the corporate LAN the IP would resolve to the outside (WAN) address. When you move the laptop inside the corporate LAN, it should clear the cache so mail.company.com resolves to the internal (LAN) address. This is just one example of a dumb DNS transition not taking place switching from outside to inside (and vice versa).
Instead, OS X is holding onto the outside DNS record even when moving to the Corporate LAN. The only way to fix is to run the DNS cache command (which is MUCH more convoluted in Yosemite now), or more easily, to quickly turn off then turn on WiFi.
This is an irritation as I have to perform this action every morning, and every time I come back to my desk from offsite.

Well, clearing the caches is as simple as this, no?
Clear MDNS Cache
sudo discoveryutil mdnsflushcache
Clear UDNS Cache
sudo discoveryutil udnsflushcaches
One other thing: Have you tried 10.10.2? There are many many fixes in 10.10.2 over 10.10.1.

Field not updating when switching fields.

I am using Oracle Forms Builder 10g and I created a procedure to get the data from a related table into the data block
PROCEDURE GET_MODEL_VAL IS
CURSOR MODEL_VAL IS
SELECT VMODEL_NAME
FROM VEHICLE, VEHICLE_MODEL
WHERE :VEHICLE.VEHICLE_ID = VEHICLE.VEHICLE_ID
AND :VEHICLE.VMODEL_ID = VEHICLE_MODEL.VMODEL_ID;
BEGIN
OPEN MODEL_VAL;
FETCH MODEL_VAL INTO
:VEHICLE.VMODEL_NAME;
IF MODEL_VAL %NOTFOUND THEN
     :VEHICLE.VMODEL_NAME := NULL;
END IF;
CLOSE MODEL_VAL;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
     MESSAGE ('Model Data Not Found');
     WHEN OTHERS THEN
     MESSAGE ('Post-Query Unsuccessful');
END;And I created an on validate trigger to check if the FK is valid and then call the above pcedure
DECLARE
     NUM NUMBER;
BEGIN
     SELECT COUNT(*) INTO NUM
     FROM VEHICLE, VEHICLE_MODEL
     WHERE :VEHICLE.VMODEL_ID = VEHICLE_MODEL.VMODEL_ID;
     IF
          NUM = 0 THEN
          DISPLAY_VMID_ALERT;
          RAISE FORM_TRIGGER_FAILURE;
     END IF;
     GET_MODEL_VAL;
END;Now here's the fun part. If I am updating the record when I tab or click away from the VMODEL_ID field the VMODEL_NAME field updates and everything is fine, however during an insert it does not.
Any insight?
The Oracle Peon...
Edited by: Oracle Peon on Apr 25, 2013 10:18 AM
Edited by: Oracle Peon on Apr 25, 2013 10:31 AM
Edited by: Oracle Peon on Apr 25, 2013 11:25 AM

I was just typing up a response to you Steve when it hit me, the VEHICLE_ID isn't in the database yet during an insert.
WHERE :VEHICLE.VEHICLE_ID = VEHICLE.VEHICLE_ID
AND :VEHICLE.VMODEL_ID = VEHICLE_MODEL.VMODEL_ID;should be
WHERE :VEHICLE.VMODEL_ID = VEHICLE_MODEL.VMODEL_ID;Now I'm a bit new to Oracle so excuse my ignorance but you and Amatu lost me in your explanation.
I'm going to mark this as answered but I'd appreciate either a little more detail on what you guys did answer or some links to help me learn a bit more.
Thanks...
The Oracle Peon...
Edited by: Oracle Peon on Apr 25, 2013 11:25 AM

Desktop not showing when switching between vc ?

Hi.
I open the desktop in vc1 ( using startx ) then when I go to vc2 ( using ctrl + alt + f2 command) and come back to vc1 ( ctrl+alt+f1) , the desktop is not showing. No error but just not showing (terminal) , I have to terminate it and startx again to get desktop showing again.
Any suggestion ? ( I use openbox if that help)
Last edited by Tg (2008-12-02 09:30:34)

I have a similar problem: http://bbs.archlinux.org/viewtopic.php?id=59956
Could you tell me if that happens to you too?

Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!

Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!

I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem.

Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

Graphic distortion when switching between external and built-in display (rMBP)

Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

Do you have intel gpy as well as other graphic card? You may be viewing document on different gpu's. PS does not like multiple gpu's.

Tabs and pages not drawn when switching tabs.

When switching between tabs or opening new tabs, the tab and the page are not drawn. But if I scroll down the page is drawn.
This doesn't happen always. It happens randomly.
Here's some sample sample images:
https://dl.dropboxusercontent.com/u/14279386/imghost/tabrender/1.png
https://dl.dropboxusercontent.com/u/14279386/imghost/tabrender/2.png
I've been having this problem since a few versions back.

If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
In Firefox Safe mode these changes are effective:
*all extensions are disabled (about:addons)
*default theme is used (no persona)
*userChrome.css and userContent.css are ignored (chrome folder in profile folder)
*default toolbar layout is used
*JavaScript JIT compilers are disabled
*hardware acceleration is disabled (Options > Advanced > General)
*plugins are not affected
*preferences are not affected

Content does not update when published

My content is not updating when I publish updates to my app. Side loading shows the updates, but an updated published folio doesn't. On the third try, I got a blank light grey screen. I finally had to unpublish and republish the content, which is obviously not an ideal situation.
Are there any known bugs or problems at the moment that could be causing this issue? The DPS Status page doesn't have any info.
Thanks
-Scott

I'm not aware of a way to get out of this state cleanly. Uninstalling and reinstalling the app fixes the problem (unless your unpublish/republish again), but it's difficult to tell your customers to uninstall/reinstall. Another option is to unpublish and then publish the affected folios as different folios, but then some of your users will end up with two versions of a similar folio until they archive the older version.
Let me ask around to make sure that I'm correct about the cause and to see if there's a cleaner workaround.

Error when switching between drafts: "The instruction at "0x009f6487" ...

Running Contribute CS3 and get this error frequently when switching between documents in the Draft Console:
The instruction at "0x009f6487" referenced memory at "0x06bd7a24". The memory could not be "read".
Click on OK to terminate the program
Click on Cancel to debug the program
I do not get this error any other time. Only when editing multiple documents and switching between them. Clicking Save for Later on the toolbar, instead of clicking directly on the document in the Draft Console does not help.
Any help or suggestions are much appreciated.

Can you please try clearning the Contribute preferences?
To Clear the preference, quit Contribute, and then delete the Contribute CS3 folder in C:\Documents and Settings\<user>\Local Settings\Application Data\Adobe\ and also run the following command " reg delete "HKCU\Software\Adobe\Contribute 4.1" /f " if you are using Contribute CS3. Reconnect to the site and try the same scenario.
Note that, if you clear the preferences then no connection will be listed in Contribute, you need to recreate the connections. It will be like a fresh installation.

FaceTime camera turns off when switching between spaces

I will have the Facetime app on, have a conversation with a person. I have Mail opened up full screen in another "space." When I switch to that space, the camera turns off. I have to go back to the "space" that FaceTime is in in order to turn the camera back on. Is there a way to keep the camera on all the time when switching between different spaces and the Dashboard?

Having the same problem - In Snow Leopard, when I was on a FaceTime chat with a friend, I was able to navigate away from the FaceTime and surf, check the calendar and other stuff without pausing my video feed. In LION, for whatever reason, FaceTime pauses itself whenever I navigate away from the app. It's as if the application is FORCING me to stay in the conversation when, sometimes, I use FaceTime for TALKING, not VIDEO CONFERENCING.

Enforcing commit when switching between windows

Today our OracleForms application is built using the call_form built-in. The end user can navigate from FormA to FormB but he must close formB in order to continue work in FormA. This is the expected behavior of the call_form built in. We also ensured that all changes are committed when navigating between forms; posting is not used. This architure/technique ensures that end-users commit frequently; with 400concurrent users we must ensures locking is kept to a minimum. Consequence of this architecture is that we do not have a full MDI application.
In order to have a full MDI application I have to use the open_form built-in but if possible i want to keep 1 session for each application user, not 1 session for each form opened. This in order to prevent an explosion of database sessions. Oke lets use the no_session parameter.
Now what's my problem ? I order to keep locking to a minimum I want to enforce the end user to commit changes when switching between windows. Does somebody has an advice which trigger(s) would be the most appropriate one ?
Note : that the "raise form_trigger_failure" has no effect in the "when-window-deactivated" trigger.
Note : post-form does not fire since I'am not actually leaving the calling form
Note : if possible I would like to program the validation in the calling form instead of the called form; this in order to prevent switching between windows - can cause screen flikkering.
chris

note the when-window-deactivate does not always fire when switching between windows of different forms !!!
I simply want to keep the focus on the calling form when there are pending changes and throw a message to the enduser saying 'please commit before continuing...'
I tried to program the when-form-navigate trigger but in this trigger I'am not able to retrieve the form_status of the called form.
any other help would be appreciated.

IPod will not update when plugged into computer?

Just recently my iPod with not update when I plug it into my computer. My iPod does not show up on my Mac or my iTunes. When I plug it in the screen shows the do not disconnect sign. I have tried to reset my iPod and checked for new updates, but they haven't worked. If anyone knows what to do that would be great.
Thanks

Yes. Since I installed the new system software (10.4.6) update Sunday night, I cannot update any of my iPods except the iPod video. The iPods also do not show up on my desktop. The battery charges but that's all that happens.

HT1277 Mail on my Mac computer does not update when I update my mail on my phone and iPad. Can anyone help me with this? Is there a setting I need to check?

Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?

All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then?

EA1 - bug: worksheet not updated when switching between tables of same name

Similar Messages

Maybe you are looking for