EA1 EA2 EA3 don't start on linux with jdk1.7 but work with jdk1.6!!!

I install SQLDeveloper EA1 then EA2 and now EA3 on my Linux (Fedora 19), but the result is the same.
If i start SQLDeveloper with root it work, but if i start with my user the application crash. I tested to change owner of all component, but the result is the same.
Then because I started the application with jdk1.6 (I used the EA1 who did not warning about the java version) and it work fine!!!
I opened two "Report a HotSpot Crash", but I never received a response.
No one any idea? Nobody has ever happened?
Thanks,
Enrico

This sounds like
Re: 4EA1: Not starting on Ubuntu. Unkown protocol sqldev.temp

Similar Messages

67yuhjnm keys don't capitalize with capslock but works with shift

So I just noticed a few hours ago that my 67yuhjnm keys don't capitalize with capslock but will capitize when I hold down the shift key. My keyboard was working just fine and I haven't downloaded anything recently so I don't know what could have caused this problem. I did spill a glassful of water on my keyboard a few months ago but there have been no signs of damage. A few drops of water did fall on my keyboard a few days ago that I guess may could have seeped in before I could wipe it dry but it wasn't a lot. Just a few drops and only on a few keys. Not sure if this is related but I had a Lenovo Updates window pop up soon after I noticed my keys not working and I had to actually click to download an update. I've never had to manually download updates before so I have no idea what's going on. So far there were 4 updates, 3 on Wireless LAN Driver and the other on Lenovo updates software. I've restarted my computer several times and another Wireless LAN Driver update popped up just now. I also just checked my Windows updates and there were failed Windows 10 updates in the last few days. I didn't get any notification for this huge update so not sure what happened there either. Also, I've noticed that my capslock light stays on even when capslock isn't enabled. When I do press capslock the light gets brighter, and then when it turn capslock off the light gets the slightest bit dimmer. I noticed this a few days ago, but it could have been like this for much longer and I just did not notice until now. I'm not a very observant person lol. But my issue with the 67yuhjnm definitely just happened today or in the last few days. What could have caused capslock to suddenly not work on two diagonal rows of keys? It's just those keys that don't capitalize with capslock. Shift will capitalize them. Lowercase works too. I've tried restarting my computer but that didn't fix it. I have a Flex 2 14". Please help! Thanks.

So the problem fixed itself. No idea what happened with my laptop but it seems to be fine now.

Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, don´t work with UCCX 10.5

I have a Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, after upgrade it don´t work with UCCX 10.5
I get the error message: "Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL.; nested exception is: javax.xml.ws.WebServiceException: Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. (line: 1, col: 47)
Does anyone know about this ?

Did you ever find a resolution to this issue? I have a similar issue after upgrading from 7 to 10.5. I have loaded all provided certificates to the tomcat-trust store, restarted Tomcat Services and still get the same error
Thanks

Certain web forms have formatting options like those found in Microsoft Word. They don't appear when I use Firefox, but do with IE of course. Is there a way to get it to display?

Certain web forms have formatting options like those found in Microsoft Word. They don't appear when I use Firefox, but do with IE of course. Is there a way to get it to display?

That formatting feature for text areas is known as Rich Text editing. Easy to enable on the web page with one line of code to tap into the Midas package that Mozilla uses, but the users can't enable it themselves from within Firefox.
http://kb.mozillazine.org/Rich_text_editing
http://kb.mozillazine.org/Midas
http://www.mozilla.org/editor/midas-spec.html

IMac starts with sound but remains with Apple logo and the clock running indefinetely

After software upgrade ( from mavericks to new mavericks ) iMac doesn't start anymore. It remains always in the same mode: after the sound of start the Apple logo and the clock that runs indefinitely without the start of the software. Someone knows what to do?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Satellite A660-11M: Does not start with 8GB of RAM, but works with 6GB

Satellite A660-11M:
I upgraded my RAM from 4GB (2x2GB) to 8GB (2x4GB). When I start the computer I can see in the BIOS it reads the 8GB of RAM. However, when it boots up, it does not go past the blank DOS screen (just before starting Windows).
If I remove one of the 4GB & replace with a 2GB (so I have 6GB in total) it starts ok.
Does anyone know how can I get it to work with 8GB of RAM?

Hey,
To be honest I never heard about SanMax RAM modules...
In my opinion the problems is related to your RAM modules Not compatible to your notebook or defective.
Can you test it with high quality modules from Kingston or pretested modules from an authorized service provider?

Haswell specific linux-ck doesn't work with Haswell CPU - Intel G3258?

I tried to install Haswell optimized linux-ck. Systems always freezes at boot, after kernel and init ram disk are loaded. After some time of troubleshooting I've tried generic linux-ck kernel and it works.
My question is, why Haswell optimized linux-ck doesn't work on Haswell CPU - Intel G3258?
$ gcc -c -Q -march=native --help=target | grep march
-march= haswell
$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 60
model name : Intel(R) Pentium(R) CPU G3258 @ 3.20GHz
stepping : 3
microcode : 0x7
cpu MHz : 800.000
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer xsave rdrand lahf_lm abm arat pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust erms invpcid xsaveopt
bugs :
bogomips : 6400.16
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
processor : 1
... again same info ...

kravecm wrote:My question is, why Haswell optimized linux-ck doesn't work on Haswell CPU - Intel G3258?
Despite being labeled as such, it doesn't have the full Haswell feature set. Among other things, AVX and AVX2 are missing. If the compiler generated code which uses AVX/AVX2 instructions, their lack can definitely cause the kernel not to boot.
Compare your cpu flags to mine:
$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 60
model name : Intel(R) Core(TM) i5-4570S CPU @ 2.90GHz
stepping : 3
microcode : 0x1c
cpu MHz : 799.992
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt
bugs :
bogomips : 5786.63
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
processor : 1

Adobe Reader don't start. Linux. Computer 64 bits

I have installed the adobe acrobat reader in my computer (HP - Ubuntu 7.04 - Feisty Fawn - 64 bits), but it doesn't start.
When I try to start it from terminal emulator:
rober@rober-laptop:~$ acroread
/usr/local/Adobe/Acrobat7.0/Reader/intellinux/bin/acroread: error while loading shared libraries: libgdk_pixbuf_xlib-2.0.so.0: wrong ELF class: ELFCLASS64
I search for the libgdk_pix.... but it is not available for 64 bits.
Is it possible to use acroread in 64 bits linux system?
Can anyone say me which is the way to resolve this problem?

History notice: Problem still reproducing with Adobe Reader 9.5.4 on Ubuntu 13.04 (April 2013).
Solution: The fix is to simply add the 32 bit version of the missing library. To be sure that you get them all consisstently, just:
sudo apt-get install ia32-libs
Note: Solution seen on this article from the judsonsnotes.com website.
(Joel_Antunez) wrote:
joel@joel-desktop:~$ acroread
/opt/Adobe/Reader8/Reader/intellinux/bin/acroread: error while loading shared libraries: libgdk_pixbuf_xlib-2.0.so.0: cannot open shared object file: No such file or directory

Is the website myfitnesspal no longer compatible with you? It won't allow me to log in but works with ALL other browsers. I've done troubleshoot. Didn't work.

Yesterday I had problems with the website Myfitnesspal.com. I have a tab set to automatically open when I start the browser every day. I could not log any information into the site, so I tried a log off and log on. It won't let me log on to the site. I contacted, myfitnesspal and we worked through many trouble shooting steps. I also tried all the troubleshooting steps from your site. I even did a complete shutdown and start up of my computer. Nothing has fixed this problem. I had the same issue with a couple of store I like to browse. The store site are finally working after more than 6 months of frustration. Myfitnesspal works on ALL other browsers. So with everything that has been tried and done, the problem seems to be on your end somewhere. I am running Windows 7 Professional, 32 bit.
I really hope that this can be fixed because the website displays best on your browser. Should you have any questions, please don't hesitate to email me.
Thank you for anything you can do to fix this and for your time.

Sometimes, sites divide their content and login logic over multiple servers. In that case, the sites may not recognize that you have logged in if you block third party cookies. Can you check your cookie settings, as described in this article: [[Websites say cookies are blocked - Unblock them]].
During your earlier troubleshooting, did you try the site in Firefox's Safe Mode to rule out an extension as the potential culprit? More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

Solaris 10: BIND 9 Chroot Service fails to start with SVCADM but works when

I recently upgraded with Solaris patches and after the reboot my Bind Named services (DNS) go into maintenance mode.
bash-3.2# svcs -xv
svc:/network/dns/server:chroot (?)
State: maintenance since Thu Nov 01 00:22:19 2012
Reason: Start method failed repeatedly, last exited with status 1.
See: http://sun.com/msg/SMF-8000-KS
See: man -M /usr/man -s 1M named
See: /var/svc/log/network-dns-server:chroot.log
Impact: This service is not running.
Output from var/svc/log/network-dns-server:chroot.log below
[ Nov 1 00:22:19 Executing start method ("/lib/svc/method/dns-server start chroot") ] dns-server: Executing: named -t /var/named/chroot/named -c /etc/named.conf /lib/svc/method/dns-server: named: cannot execute dns-server : start failed! Check syslog for further information. [ Nov 1 00:22:19 Method "start" exited with status 1 ]
I can run named -t /var/named/chroot/named -c /etc/named.conf manually from as root from the command line the named process starts and DNS works.
I thought this had something to do with permissions/file ownership or something like that. I have tried changing (chown/chgrp)the /var/named/chroot/named directory to root root and named root. I also did the same with the /var/named/chroot/named/named binary. I also tried the same types of things with the /etc/named.conf file. So far no luck.
Any suggestions on how to figure this out would be greatly appreciated.

Just read the mentioned thread because the answer is in it and duplicating that seems useless. Don't make it seem like you want the answer to be presented on a silver plate

Installing linux O.S. for working with IAS 10gR2 and DB11g

Hi all.
I have a Dell server with linux enterprise 5.5, but I want to re install all, reformat ,
because I need to learn how to.
how decide which O.S install if I will use it with IAS 10g and Database 11g ?
best regards

toga wrote:
Hi all.
I have a Dell server with linux enterprise 5.5, but I want to re install all, reformat ,
because I need to learn how to.
how decide which O.S install if I will use it with IAS 10g and Database 11g ?
best regardsInstall the OS the product you have is certified for.
Or install the product that is certified for the OS you have.

HT5219 Is there anyway to update a non-thunderbolt mac book air (please, don't say buying a new one) to work with a thunderbolt to ethernet adapter?

I have a late 2010 Macbook Air with Mountain Lion OS, and after buying a Thuderbolt to Gigabit Ethernet Adapter I realize that my Macbook doesn't have a Thunderbolt port!!!! (lame, isn't it??).
Is there anyway to update my Macbook Air so I can get to use the Thunderbolt-Ethernet Adapter???
Thank you in advance for any help anyone can provide!!!!!

From what you describe, this is normal (ie. correct) behaviour...
In a dark environment, you don't need the lighting to be as bright, because youre eyes are adjusted to the darkness, and there's less ambient light. In a lighter environment, you need more light from the keys and the screen to get the same effect.
The important thing isn't "how many bars of brightness is it set to" but "can I read the key caps and see the screen". If the answer to that question is "yes" than the automatic light adjustment is doing it's job - if it's too bright or too dim them just adjust it accordingly and then leave it on automatic.

Iweb with Lion: Umlaute after ftp-upload on linux-Server are not correct - but worked with Leopard!

Hi from Germany. I used iweb 3.04 and OS X 10.6+ and everything worked fine on different websites, including German Umlaute ä, ö, ü, ß.
After upgrading to Lion all Umlaute are not correct spelled (strange letters) after ftp-upload on a linux-server (which is the same as before). Before upload these Umlaute are spelled correctly, but not after upload.
Trials were a) upload htaccess file b) use older iWeb 3.03 c) asking server administrator (answer: "use ae, oe, ue instead"), but nothing worked.
Any ideas or help?
Thank you very much, and excuse my english
Peter

The problem lies in the uploading of the files or the server itself. If the umlautes looked good on the server before then we have to think it's the uploading process. Try using the free FTP client Cyberduck to upload your site folder to your server. Then check to see if the rendering is correct.
What's the URL of your site so we can examine it first hand?

Firefox works at mcdonalds with windows but not with linux

I have Windows 7 Pro and Ubuntu 14.04 LTS on my laptop. I use firefox browser on both OS's. I am able to connect to internet when I use Windows OS and run firefox at McDonalds. But, when I try to use firefox and Ubuntu OS it will not connect while at McDonalds. Otherwise, the Ubuntu distro and firefox work fine everywhere else.

''bsluss [[#question-1051190|said]]''
<blockquote>
I have Windows 7 Pro and Ubuntu 14.04 LTS on my laptop. I use firefox browser on both OS's. I am able to connect to internet when I use Windows OS and run firefox at McDonalds. But, when I try to use firefox and Ubuntu OS it will not connect while at McDonalds. Otherwise, the Ubuntu distro and firefox work fine everywhere else.
</blockquote>
Thanks for the response. To narrow this down a bit more, the wireless makes the connection to their router, but, mozilla does not bring up the splash page that is needed to accept their connection. Again, it only happens when running firefox with Ubuntu; not when running firefox with Windows.

HT5192 ı couldt manage to download iOS 5.1 Software Update . system trying to connect to server but download don't start , what would be reason?

ı couldt manage to download iOS 5.1 Software Update . system trying to connect to server but download don't start , what would be reason?

download with itunes, or with one of your devices, and re-try, most causes it the update server it self.

EA1 EA2 EA3 don't start on linux with jdk1.7 but work with jdk1.6!!!

Similar Messages

Maybe you are looking for