EA1 - PgDown, PgUp doesn't work in editors

SQLDev version: 4.0.0.12, Windows XP
Select some table -> right-click Open -> select "Data" tab -> pressing keys "Page Up", "Page Down" doesn't work.
The same is with "Columns" tab (you can check if you have a table with a dozens of columns)
A little different behaviour is on the "Constraints" tab: "Page Up", "Page Down" scrolls content only one row up or down.

Bugged.
Thanks for the report!

Similar Messages

EA1 - Manage Database doesn't work

Environment:
Windows 2000
Connected to Oracle 10.2 or 9.2 (Using oracle spatial)
Right click on a connection and go Manage Database.
It brings up a tab with this text in the middle of it
Only Oracle connections are currently supported to display status.
Am I doing something wrong here?

You not doing anything wrong there's a bug logged on this.
-kris

EA1 - Right gutter scroll bar in the Code Editor doesn't work?

SQL Developer version 4.0.0.12, Windows XP
I'm opening package body in Code Editor. In previous version of SQL Dev after pressing CTRL and moving mouse over the right gutter I could see a few lines of the code from mouse pointed position in the source.
Now it doesn't work.
Link below - section "Working in the Procedure Editor":
http://www.thatjeffsmith.com/archive/2012/01/viewing-plsql-compilation-errors-in-oracle-sql-developer/

Hi,
It is true the right gutter's general scrolling window view capability no longer exists in 4.0. However, if code errors exist, then small blue squares (uncompiled code) or slightly larger red rectangles (compiled code) appear in the gutter representing the relative positions of the bad code. Hovering the mouse over those produces a pop-up display of the offending code and, in fact, the pop-up will not display if the Ctrl key is pressed at the same time. Of course, clicking on the rectangles or squares moves the editor's current line to that code as in earlier releases.
So it is not clear whether this is merely the new, intended behavior, or if more of the prior behavior remains to be implemented in 4.0. As far as I can tell, nothing important has been lost here, but that is just my opinion.
Regards,
Gary
SQL Developer Team

Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work

I downloaded and installed Premier Elements 13 last night. In using it today, Organizer works, but when I select Editor, I am required to log in to my account to activate it. When I do so, then I eventually reach the agreement to terms page, accept it but Editor still doesn't work. Contacted Chat and had an extremely humourous but extremely frustrating chat before the chat stopped working (??????) Here is a copy and paste of the chat up until Chat stopped working:
Here is my chat at the last point I saved a copy......
Thank you for contacting Adobe.
A representative will be with you shortly.
Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
You are now chatting with Amit Kumar.
Amit Kumar: Hello! Welcome to Adobe Customer Service.
Gordon Stogre: I tried the forums but no one had replied for the last 2 hours. Experts must be on vacation.
Gordon Stogre: Hello Amit. Are you there?
Amit Kumar: http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
Gordon Stogre: Do you want me to click on that link?
Amit Kumar: Yes
Gordon Stogre: Why?
Amit Kumar: Download it again from this link.
Gordon Stogre: I've already downloaded and set up Premier Elements 13.
Gordon Stogre: That was last night
Gordon Stogre: Why?
Amit Kumar: Download and install itagain from this link.
Gordon Stogre: It took about 2 hours to set it up on a fast internet connection
Gordon Stogre: Why should I have to do it again. It is already set up and installed.
Gordon Stogre: The problem is with the Editor. The Organizer works correctly.
Amit Kumar: There is some issue with the software.
Gordon Stogre: What is the issue. Please explain
Amit Kumar: Some files did not download that's why it is not working.
Gordon Stogre: Are you saying that the Adobe file download is faulty?
Amit Kumar: Yes
Gordon Stogre: Everything downloaded correctly and it installed correctly
Amit Kumar: Ok
Amit Kumar: One moment while I transfer you to the specialist that can assist you.
Gordon Stogre: I want a refund on what I paid for Premier 13. This is ludicrous that I should have to spend this much of my time downloading and installing.. I want it free now.
Gordon Stogre: This is absolutely ridiculous that Adobe uploaded a faulty software. My time is extremely valuable.
Amit Kumar: I have arranged refund for this product.
Gordon Stogre: I have spent a total of 6.5 hours downloading, setting up and installing and then trying to get it working.
Gordon Stogre: But I still want to use this product with the properly working software. Is my licence still valid if I download and reinstall it?
Amit Kumar: I have arranged refund for this product now.
Gordon Stogre: WILL I STILL BE ABLE TO USE IT ????
Gordon Stogre: Will my licence that I purchased for Premier Elements 13 still be valid???
Gordon Stogre: I want to use it but am very frustrated and annoyed by the problem.
Amit Kumar: You will not be able to use it.
Gordon Stogre: I NEED TO USE IT !!!
Gordon Stogre: Do you understand?
Gordon Stogre: I want a refund and an operating version of Premier 13.
Amit Kumar: But I have arranged refund for this product now.
Gordon Stogre: Please escalate this to your supervisor if you are not able to do this.
Gordon Stogre: Or I will publish this all over internet
Amit Kumar: Would you mind waiting for 2 - 3 minutes while I research on this issue?
Gordon Stogre: I will wait
Gordon Stogre: 6:13 local time now. About 9 minutes since you asked me to wait...............
This continued on until 6:39 when the supervisor told me he was transferring it to "the group that could help me with this issue" Then the chat shut down.

Oldcameraman
At the forum level, there is no instantaneous reply. And, there is no "how long before I get someone to post in my thread" expectation.
This is not Adobe. Rather user to user. Although I personally try to see that every thread has a viable reply before the end of the day, there are no guarantee how long it will take for a thread to be answered with some information that may actually help you resolve your particular issue. I am not affiliated with Adobe in anyway. Just a user with an overactive troubleshooting gene.
From what you wrote, you no longer have a purchased product. You demanded your money back from Adobe via its Adobe Chat, and you got what you demanded, that is, your money back request put into action. So, I am not sure what you are left to work with.
If you purchased from an online download from Adobe and the install apparently did not take, then it is not unreasonable to be asked to uninstall/reinstall the program with antivirus and firewall(s) disabled. That may or may not help. There are certain troubleshooting drills that need to be followed as one systematically goes through the progress of ruling factors in or out of the problem equation.
Part of the drill might have included:
a. What computer operating system is your Premiere Elements 13 running on?
b. Does the problem exist with and without the antivirus installed?
c. Are you running the program from a User Account with Administrative Privileges and with Run As Administrator applied to the desktop icon?
d. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many video cards/graphics cards does your computer use, 1 or 2?
e. Is your computer connected to the Internet?
f. Is the latest version of QuickTime installed on your computer along with Premiere Elements 13?
g. Other
But, none of the above is going to be of use if you do not have a purchased copy of Premiere Elements 13 to work with. You need to sort out your Adobe situation with Adobe.
We will be watching for your progress. We want you to succeed.
ATR

Adobe Photoshop Elements 12 Editor doesn't work anymore on my Mac Pro...

Adobe Photoshop Elements 12 Editor doesn't work anymore on my Mac Pro, running Mac OS X Yosemite 10.10.2. I don't know why, because Photoshop Elements has always worked properly before today.
Quite disappointing. I installed the application in May, 2014, downloading it from the App Store, and now I would like to re-install Photoshop Elements.
Can you help me, please?

Command + shift + alt... and it works again! Thanks a lot.

BUG: EA 2.1 code editor: completion insight doesn't work in opened files

I just migrated from SQLDEV 1.5.5 to EA 2.1. It's nice that I colud find so many of my suggestions implemented in this new version. THANKX :-)
code editor:
When I'm working in SQL Worksheet the "completion insight" feature is working well, but when I try to use it in an opened file, it doesn't work.
Is there a special preference to turn on for use with files?
Edited by: @chris on 12.11.2009 10:57

Correct it did work in 1.5. on .sql files, when connected, so I have updated the ER to bug. We also need to expand this to support PL/SQL files.
Sue

Lightroom 5 doesn´t work as external editor

Problem with Lightroom 5.
my workflow on windows 7 was managing the photos with Zoner Photo Studio version 16- then sending the picture from with : open with to lightroom.
. After unistalling updates 5.3 5.4 or 5.6 it doesn´t work .
Does anyone know this problem?
Thanks

Lightroom is not and will not work as an external photo editor as it is a non-destructive digital asset manager and editor that works through it's own catalog database. All images have to be imported into Lightroom before any development can be undertaken.

"Auto completion" doesn't work in the new ABAP editor

Hi Gurus,
It is quite strange that the "auto completion" doesn't work for me in my new laptop. After I press "ENTER", it starts a new line.
Any body know this?
Thanks a lot.

Hello,
Use "Tab" instead of "ENTER"

What to do when Outlook AutoArchive doesn't work

AutoArchive feature helps us manage the space in the mailboxes or on the e-mail server that were are using by automatically moving items to an archive location. These items can be Email messages, Calendar items, Tasks, Notes, Journal entries.
However, sometimes some users may find that Outlook AutoArchive doesn’t work as expected, this can be frustrating. In this article I’ll introduce some steps to troubleshoot this issue, I hope it will be helpful to those who meet the issue.
Always check the Default AutoArchive settings first
When AutoArchive is not working properly, the first thing we should do to troubleshoot the issue, is to make sure the AutoArchive setting is correct.
I’ll take Outlook 2013 for example, go to FILE tab -> Options -> Advanced -> AutoArchive -> AutoArchive Settings… button, we will see the AutoArchive window below:
l
To make AutoArchive work, make sure the first checkbox has been selected and you have configured how frequently you want AutoArchive to run.
l
If you select “Prompt before AutoArchive runs”, it will notify you before AutoArchive runs.
l
If you want to delete expired items, select “Delete expired items (e-mail folders only)”.
l
You should select “Archive or delete old items”, or only expired items will be deleted.
l
Select “Show archive folder in folder list” to let the archive.pst appear in the folder list, which helps you find archived items easily.
l
You can set the age of the items that you want to archive in the field of “Clean out items older than x”, the age is based on the last Modified date by default. I’ll introduce this later in this article.
l
Then you need to decide whether to move old items to an archive .pst file, or permanently delete old items. Once you have your choice, you can apply these settings to all folders now and click OK to save the settings.
AutoArchive doesn’t work on one specific folder?
Apart from the default settings, each folder can be set with its own AutoArchive settings different from the global settings.
Right click on the folder and select Properties -> AutoArchive tab.
l
You can select “Do not archive items in this folder” if you want this folder to be an exception of AutoArchive.
l
If you select “Archive items in this folder using the default settings”, you will archive items in this folder using the default settings as it states, and the “Default Archive settings” button below is referring to the same AutoArchive
window as FILE -> Options -> Advanced -> AutoArchive -> AutoArchive Settings.
l
If you want the AutoArchive settings for this folder to be different from the Default AutoArchive settings, select “Archive this folder using these settings”. The age of items can be set to a different one, you can even select a separate
.pst file to archive items in this folder. After everything is decided, click OK to save the settings.
Please note these settings are specific to each folder and are not applied to subfolders. Please configure the settings individually for each folder.
Modify the ArchiveIgnoreLastModifiedTime registry value
Outlook archive works based on the last modified date and time by default, if you
reply, forward, move, edit, save, import an item, the modified date will change, this may cause the AutoArchive not to archive the item.
If you want to let Outlook to archive items based on the received date, you need to set the ArchiveIgnoreLastModifiedTime registry value.
Since serious problems might occur if you modify the registry incorrectly, please back up registry in Windows first:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
To create the ArchiveIgnoreLastModifiedTime registry value, follow these steps:
Press Win + R to start Run, type
regedit in the Open box, and then click OK.
Locate and then click the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Preferences (Outlook 2010)
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Preferences (Outlook 2013)
On the Edit menu, point to New, click
DWORD Value, type ArchiveIgnoreLastModifiedTime, and then press ENTER.
Right-click ArchiveIgnoreLastModifiedTime, and then click
Modify.
In the Value data box, type 1, and then click
OK.
Exit Registry Editor and restart Outlook to make the registry take effect.
Once the registry key is added, check if Outlook archives the items properly. We can try manually archiving:
Go to FILE tab -> Info -> Cleanup Tools -> Archive, select the folders that you want to archive and archive criteria, click OK. Outlook should then archive the items based on the received date.
The Archive .pst file
As the Archive storage file, the .pst file may cause AutoArchive not working issue. If the .pst file is corrupted or too large, AutoArchive may not work as expected.
Scanpst.exe is an Inbox repair tool to fix Outlook Data Files like .ost and .ost files, it can be used to fix a corrupted .pst file. To find Scanpst.exe, browse to the locations below:
For Outlook 2013 on a 32-bit version of Windows:
<disk drive>\Program Files\Microsoft Office 15\root\office15
For Outlook 2013 on a 64-bit version of Windows:
<disk drive>\Program Files(x86)\Microsoft Office 15\root\office15
For Outlook 2010 on a 32-bit version of Windows:
<disk drive>:\Program Files\Microsoft Office\Office14
For Outlook 2010 on a 64-bit version of Windows:
<disk drive>:\Program Files\Microsoft Office(x86)\Office14
When the tool is opened, type the path and the file name of the .pst file or click Browse to locate the file by using the Windows file system, and then click Start.
More details about the tool can be found in this kb below:
How to repair your Outlook personal folder file (.pst)
http://support.microsoft.com/kb/272227/en-us
Another scenario is the .pst file is full. For Outlook 2003 and Outlook 2007 the default limit is 20GB and for Outlook 2010 and Outlook 2013 the limit is 50GB.
You won’t be able to add items to the archive .pst file when the file reaches 19GB or 47.5GB, once the .pst file gets too large, I suggest you create a new .pst file to archive the items.
One more thing to remember, don’t store the .pst file on the network share, which we always reminder our users of.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Consider this program that tests whether a number is
prime.
[attempt to divide by each integer from 2 to n-1]At risk of lowering the signal to noise ratio, I
should point out that the algorithm given is just
about the worst possible.
I know that the point was to illustrate debugging
and not good prime test algorithms, and I disagree
with the correspondent who thought the post was
condescending.
Anyway, the java libraries have good prime testing
methods based on advanced number theory research that the
non-specialist is unlikely to know. Looking at the java
libraries first is always a good idea.
Even with the naive approach, dramatic improvements
are possible.
First, only try putative divisors up to the square root
of the number. For 999997 this is about 1000 times faster.
Next only try dividing by prime numbers. This is about
7 times faster again. The snag, of course, is to find the
prime numbers up to 1000, so there might not be much
advantage unless you already have such a list. The sieve
of Erastosthenes could be used. This involves 31 passes
through an array of 1000 booleans and might allow an
improvement in speed at the expense of space.
Sorry if I've added too much noise :-)

Why does File send link not work? Even right clicking on my mouse doesn't work. Is there a fix for this?

Why can I no longer send links to websites? Clicking File>Send Link doesn't work nor does right clicking on the mouse. Both worked prior to Firefox 6. I also can't send emails to websites that don't spell out their address but instead say "to send an email click here". Everything works fine in Chrome and Safari but not in Firefox.

OK well after first reverting to an older version of firefox to get my right click menu options back I have since discovered one way that works but at a cost.
By using the addon menu-editor it is possible to move the EMAIL LINK button from the file menu to the (Main Context Menu) ie the "right click menu" BUT you will loose the file menu button as there is no way to clone the button and only move a copy. Bunch of clowns that decided to do this I really don't know what they were thinking. Very VERY stupid move.
Here is a link to the only option that works https://addons.mozilla.org/en-US/firefox/addon/menu-editor/
Can you fellows/chaps  at least provide a clone and move option in the menu-editor?

My pages are not working on Mountain Lion. I reinstalled iWork from the CD updated it to 9.3 restarted computer and it still doesn't work. What else I can do? Heeelp!

The Pages stop working on my computer when I upgraded OS to Mountain Lion. I reinstalled iWork from CD and updated to 9.3 version from Apple store. I also restarted computer before opening the iWork. It still doesn't work. It keeps giving me the error page. The same thing with Numbers. Only Keynotes opens. What else can I do? Heeelp please!

We are not omniscient. Use screencapture on the error page. Shift + Command + 4 … then drag the cross-hairs around the error, and release. The Screen Shot will be written to your Desktop. Use the camera icon in this editor’s tool bar to embed that Screen Shot of your error in a follow-up post here.
Did you move the Pages and Numbers applications out of /Application/iWork ’09 folder, where they are expected to reside? Did you run /Applications/Utilities/Disk Utility.app, and on your boot drive, verify/repair permissions?

[T410s] Lenovo Software doesn't work for me

Hi,
System:
- T410s 2912 W69, (8 GB RAM)
- Windows 7 Prof. 64bit
The following software is installed on my system: Office Prof. Plus 2010 (64bit), SQL Server 2008 R2 (64bit), Visual Studio Ultimate 2010, Sybase Powerdesigner 15.2, Adobe Reader 9 and Kaspersky IS 2011.
Since some days nearly the whole Lenovo Software doesn't work. The only exception is System Update 4.
When I try to start e.g. Lenovo Toolbox I get the error message "ThinkVantage Toolbox doesn't work...". A View into the Windows solution center offers the following message:
Beschreibung
Stopped working
Pfad der fehlerhaften Anwendung: C:\Program Files\PC-Doctor\pcdrcui.exe
Problemereignisame: CLR20r3
Problemsignatur 01: pcdrcui.exe
Problemsignatur 02: 6.0.5692.7
Problemsignatur 03: 4c87004b
Problemsignatur 04: PresentationCore
Problemsignatur 05: 3.0.0.0
Problemsignatur 06: 4b594d40
Problemsignatur 07: 5017
Problemsignatur 08: 0
Problemsignatur 09: System.TypeInitialization
Betriebsystemversion: 6.1.7600.2.0.0.256.48
Gebietsschema-ID: 1031
The same problems occured in starting e.g. the lenovo power manager, the fingerprint reader etc. and the graphics properties window (gfxui.exe)
Beschreibung
Stopped working
Pfad der fehlerhaften Anwendung: C:\Windows\System32\GfxUI.exe
Problemereignisame: CLR20r3
Problemsignatur 01: gfxui.exe
Problemsignatur 02: 8.15.10.2154
Problemsignatur 03: 4c2053e7
Problemsignatur 04: PresentationCore
Problemsignatur 05: 3.0.0.0
Problemsignatur 06: 4b594d40
Problemsignatur 07: 5017
Problemsignatur 08: 0
Problemsignatur 09: System.TypeInitialization
Betriebsystemversion: 6.1.7600.2.0.0.256.48
Gebietsschema-ID: 1031
I also try to reinstall the ThinkVantage Toolbox via http://web.lenovothinkvantagetoolbox.com/index.html. The installation fails with the following protocol:
Informationen über das Aufrufen von JIT-Debuggen
anstelle dieses Dialogfelds finden Sie am Ende dieser Meldung.
Ausnahmetext
System.UnauthorizedAccessException: Der Zugriff auf den Pfad "full_5692_08_64_00.exe" wurde verweigert.
   bei System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive)
   bei System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive)
   bei appupdater.utility.ProcessLauncherManager.DeleteFiles(String exePath)
   bei appupdater.utility.ProcessLauncherManager.LaunchProcess(String exePath, Boolean bWaitForExit, Int32 sleepInMilliSeconds, String buildID)
   bei appupdater.formcontrols.download.DownloadProgressFooter.LaunchInstall()
   bei appupdater.controllers.UIBuildIDManager.NotifiyDownloadDelegate.Invoke(Boolean bFlag)
   bei appupdater.controllers.UIBuildIDManager.UpdateDownloadComplete(String buildID, String saveFileName, DownloadStates state)
   bei appupdater.utility.DownloadLargeFile.m_webClient_DownloadFileCompleted(Object sender, AsyncCompletedEventArgs e)
Geladene Assemblys
mscorlib
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4952 (win7RTMGDR.050727-4900).
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll.
mscorlib.resources
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4952 (win7RTMGDR.050727-4900).
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll.
appupdater
    Assembly-Version: 1.0.5551.3.
    Win32-Version: 1.0.5551.03.
    CodeBase: file:///C:/Users/STEPHA~1/AppData/Local/Temp/nsk41D2.tmp/appupdater.exe.
System.Windows.Forms
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4927 (NetFXspW7.050727-4900).
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll.
System
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4927 (NetFXspW7.050727-4900).
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll.
System.Drawing
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4927 (NetFXspW7.050727-4900).
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll.
System.Configuration
    Assembly-Version: 2.0.0.0.
The rest of the software mentioned above works great and fast. Only the Lenovo software doesn't work. This is rather annoying, because I can't change e.g. important property values in the power manager.
I've deinstalled and installed (manually) again graphics driver as well as the troubleshooting software without success.
What shell I do now?
Regards
Dorian
Moderator edit: Title adjusted to better reflect message content

Dorian,
You found me! Thanks for the logs. They confirmed what I was suspecting: a font problem is causing any application built on Windows Presentation Foundation (WPF) to crash. Based on our research there are two potential issues. The fixes are pretty easy.
One or more of your installed fonts does not have a proper date/time
The Registry may have some invalid font path entries
To Detect and Fix the Font Invalid/Missing Date Problem
Open an elevated command prompt (CMD.EXE) and navigate to C:\Windows\Fonts\
Save a font listing to your desktop with the command: DIR *.* /tw /od > %USERPROFILE%\desktop\fontlist.txt
3. Open fontlist.txt with notepad.
4. Remove any fonts with a missing or invalid date (January 1, 1601 for example). Easiest way to do this is by opening Windows Explorer, going to the fonts folder (C:\Windows\Fonts\), and removing the offending fonts.
5. Open LTT or one of the other TVTs to see if the problem is solved. If not, continue with the next section.
To Detect and Fix the Font Registry Problem
WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. I cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk!
Open the Registry Editor (REGEDIT.EXE)
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts
Scan the "Data" column for each font looking for any illegal path characters
If any are found, remove the offending characters. Here are some blogs that may offer additional insight: http://code.logos.com/blog/2009/11/how_to_crash_every_wpf_application.html and http://alissonsol.blogspot.com/2009/02/when-wpf-applications-dont-start.html
Let me know how it goes.
Stephen Streufert
Senior Product Marketing Manager
PC-Doctor, Inc.
http://www.lenovothinkvantagetoolbox.com

Edit in Photoshop CS6 doesn't work with Nikon D800E NEF files in LR 4.1 RC

The "Edit in Photoshop CS6" menu item or shortcut (cmd+e) doesn't work for NEF files from a Nikon D800E in Lightroom 4.1 RC. What happens is that LR looks like it goes through all its normal paces, and launches Photoshop, and the CPU spins, but then nothing happens in Photoshop, the image never opens.
This works fine for NEF files from other cameras.

Set up CS6 as an secondary editor, and then it will use LR's built-in ACR to process the files, instead of the external ACR with CS6. The external ACR 6.7 also processes D800, just not ACR 7 just yet.
Bob Frost

Geany Latex plug-in PDF preview doesn't work [NEVER MIND]

See the end of this post
Does anyone know how to get the Geany Latex plug-in PDF preview to work? For a while it was creating a shell script in the current directory that didn't have execute permissions for the user, now I can't tell if it's even doing that (the script was designed to erase itself). I tried with both sakura and xterm as the terminal, as well as I tried with evince (my preferred viewer) and xpdfview. Also, the DVI preview doesn't work.
--EDIT--
Wait! The script magically returned. It's called geany_run_script.sh and it looks like this:
#!/bin/sh
evince "/home/skottish/latex/1/John.pdf"
echo "
(program exited with code: $?)"
rm $0
It works if it's chmoded then executed, but that's totally pointless for the user to do.
--FINAL EDIT--
I've spent far too much time on text editors. The reality is that Scite is a perfect fit for me. It's fast as hell, supports every language I want, it's fully scriptable, has auto completion... it does everything I need it to do and far more. I'm sure a very simply Lau script will implement this and anything else that I need.
--FINAL EDIT, THE NEXT GENERATION--
In Scite, you just need to put something like this in one of the options files. This works for Evince. The menu item 'pdfPreview' will be in the 'Tools' menu for .tex files:
# PDF preview through Evince
command.name.1.$(file.patterns.tex)=pdfPreview
command.1.$(file.patterns.tex)=pdflatex $(FileName) && evince $(FileName).pdf
command.subsystem.1.$(file.patterns.tex)=0
Making the second command line into this will clear up the .aux, .log. and .pdf files also:
command.1.$(file.patterns.tex)=pdflatex $(FileName) && evince $(FileName).pdf && rm $(FileName).aux $(FileName).log $(FileName).pdf
Now onto spell check...............................
--FINAL EDIT, BACK TO THE BEGINNING AGAIN--
It turns out with Geany all that needs to be done is to add this to Build-->Set Arguments-->PDF creation. Then when you go Build--> Latex -> PDF, it would launch evince:
pdflatex --file-line-error-style "%f" && evince "%e".pdf
Of course adding this to the end would clean up the build files also:
&& rm "%e".pdf "%e".log "%e".aux
Last edited by skottish (2008-09-05 21:18:29)

I don't have the Windows 7 machine in front of me to test this on, but the XP machine behaves the same if I open up Reader or Acrobat before I click Preview PDF in LiveCycle.

Clicking an element in a list doesn't work

Sorry about my rather vague subject - my problem is not so easy to sum up in a few words.
I am working on an application that
- Displays a list of items from a MySQL table
- Each item should be clickable, and on clicking should open an edit page with the clicked item pre-loaded
This must have been done millions of times before and should be simple. It doesn't work, presumably because I know too little. This is what I have done:
The clickable item list looks like this (without all the trimmings):
<h:dataTable id="users" value="#{userlist.userList()}" var="ul">
<h:commandLink action="#{ul.edituser}" value="#{ul.uid}"/>
This displays a list of the right sort of items, but the clickable item (the UID) doesn't do anything. Also, the resulting html looks the same no matter what I put into the action element - this is the inside of the a-tag:
href="#" onclick="mojarra.jsfcljs(document.getElementById('j_idt9'),{'j_idt9:users:1:j_idt15':'j_idt9:users:1:j_idt15'},'');return false"
I'm not entirely sure what that means; all I know is that it does not call the edituser() method.
But what is the right way, then? I haven't found any examples that highlight this particular situation although it must be used all the time, I expect.

#{userlist.userList()
#{ul.edituser}Spot the difference there. I do believe "ul" should be "userlist"; in other words it will link to an action method "edituser()" in a JSF managed bean which I assume will be named Userlist. Its really simple when you run into the problem of an action method not working: 99/100 times the action method EL declaration is wrong. Now it could be typo, but I've been known to forget the #{} part too...
I use the JBoss Tools Eclipse plugin myself; it has nice JSF additions that add EL validation and autocompletion to the editor. That way I know already from the code view when I've made a mistake in stead of "at runtime". A missing action method turns up as a warning in the jsf editor for example. That is of course only helpful when you're actually using Eclipse ;)

EA1 - PgDown, PgUp doesn't work in editors

Similar Messages

Maybe you are looking for