EA2 Connections are not saved
When I migrate my connections from a previous version of SQL Developer these connections will not be saved.
In the command window I get following messages:
WARNING: Unknown directive: SetSkipJ2SDKCheck
(this message is always displayed in the cmd window when I start SQL Developer)
During import of the connections following messages are displayed in the command window:
DB Adapter warning: Replacing connection creator oracle.jdeveloper.db.adapter.OracleConnectionCreator for subtype oraJDBC with oracle.dbtools.raptor.standalone.connection.RaptorConnectionCreator
DB Adapter warning: Replacing connection creator oracle.jdeveloper.db.adapter.MySQLConnectionCreator for subtype MYSQL with oracle.dbtools.thirdparty.mysql.MySQLConnectionCreator
When I restart SQLDeveloper these messages are displayed again and the connections are not displayed in the connections tree.
Client:
Windows XP professional SP2
APPDATA=\\dus30srv0213\home_D$\Ernst.Leber\XPC\Application Data
Perhaps the '$' in my APPDATA causes the problem.
This is clearly printed in bold in the release notes, dude!
People are free to do as they want, but if you don't follow the guidelines, don't come complaining afterwards either...
regards,
K.
Similar Messages
-
Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)
You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved -
The messages sent with PC suite are not saved in m...
I have a bluetooth device to connect my phone (Nokia 6233) to PC. When I'm trying to send a message everything goes perfect (the message is sent) only one problem appear: the message is not saved in my phone.
Any ideas for this problem?
Why the messages sent with PC suite are not saved in my phone?there may be differencies between phone models here (S60 devices or S40 devices, you have S40). Also if I recall right, it used to be so that some older versions of PC Suite did not save the PC sent sms's to phone.
However, with my N95 the messages are saved. So make sure you have the latest Pc Suite and then try again. If it fails, then it might be that message saving is not supported with S40 phones (Anyone having a S40 phone could verify this) -
Mail 3, smtp, IMAP: sent messages are not saved on server
Hello,
I had problems using Mail 3 after I upgraded to Leopard, so I used Thunderbird for the time being. With the update 10.5.1 I tried again: most problems solved BUT: sent messages are not saved on the server in mailbox "Sent".
Some background: I deleted the folder "<User>/Library/Mail" and "<User>/Library/Preferences/com.apple.mail.plist" and configured Mail from scratch.
To be sure: I still have Thunderbird installed, and when I send with Thunderbird: a copy is placed in "Sent".
Another thing I noticed: it takes more than a minute to send from Mail 3 and a few seconds when I send from Thunderbird. I have another Macbook Pro with 10.5.0 installed: same problem with sending.
Any help is appreciated.
reneWell, be stumped I did all that, but to be sure, I did it again:
I have a lot folders with subfolders and they are shown under my account name.
I created a new folder "test" in my IMAP account and designated it to be the new "Sent" folder. It replaces my previous Sent folder in the group Inbox, Drafts, Trash. My previous Sent folder now appears under my account name as a "normal" folder.
I send a message and the Activity monitor says: +"Delivering message: copying message"+. After a minute Mail is done. I check my (new) "Sent" folder and it's empty. I double check in webmail: it's empty.
So I go to the Finder and look in my IMAP folder: <user>/Library/Mail/<IMAP-account>/test.imapmbox and there is no folder "Messages", only Info.plist.
Then I try to move a message to the "Sent' folder: for a minute the Activity moinor says: Copying messages: copying message" and then Mail prompts: +"The message "testing" could not be+
+The connection to the server mail.hicetnunc.nl on port 143 timed out"+.
So it looks like Mail has a problem with the default "Sent" folder: it cannot copy messages to that folder at all! Aha!
But then I try to move a message to a "normal" IMAP folder: same thing! Mail cannot copy to any folder!
In both instances Mail says: +"The message "..." could not be be moved to the mailbox "..."+
+The connection to the server mail.hicetnunc.nl on port 143 timed out"+
Last thing: I try to move a message to a folder in the same account again. But in the process I quit Mail. I open Mail again and Mail is performing pending operations: copying message. After a while Mail prompts: +"Operation could not be completed. (MFMessageErrorDomain error 1028.)"+ and crashes... I open Mail again and it tries to peform pending operations. Again: an error message and Mail crashes. This keeps going on so I delete the whole account and set it up again. Nothing's changed...
I can receive and send, but sent messages are not copied to the "Sent" folder and I cannot move messages around within a IMAP account. But TADA!!!: I can move messages from account to account. -
Server settings are not saved on client
The client has a new workstation (Vista) where the server settings are not saved. The client is able to login but have to setup the server settings overtime she logs on to SAP B1.
Client: Vista
SBO: 2007A SP01
what is causing this and how can this be resolved?You may check these threads first:
Re: Server name in Change Company does not stay
Re: SQL Connection to SAP Reset
Thanks,
Gordon -
Yosemite Mail preferences are not saved
Hello,
I just update my Yosemite to 10.10.3.
After some problems with Mail, I've been forced to delete container files and enveloppe index file, all is better except that now mail doesn't saved preferences anymore..
Also, the windows positions are not saved as well...
Last information: ON my preferences folder, I got only com.apple.mail-shared.plist file, but no com.apple.mail.plist file... Doesn't now if it's normal or not..
Thanks for your help
Here is the transcript of my console file:
14/04/2015 18:00:18,388 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
14/04/2015 18:00:20,841 WindowServer[157]: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
14/04/2015 18:00:20,856 WindowServer[157]: common_reenable_update: UI updates were finally reenabled by application "Mail" after 1.02 seconds (server forcibly re-enabled them after 1.00 seconds)
14/04/2015 18:00:21,066 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
14/04/2015 18:00:45,888 WindowServer[157]: WSGetSurfaceInWindow : Invalid surface 1276785923 for window 508
14/04/2015 18:00:47,693 CoreServicesUIAgent[357]: unexpected message <OS_xpc_error: <error: 0x7fff76035c60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff76035f70> { length = 18, contents = "Connection invalid" }
}>But should I see a com.apple.mail.plist file ?
No, not in Yosemite.
Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore is not, in itself, a solution.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. The command may take a noticeable amount of time to run.
Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there. -
I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.
I too experienced the same issue. Here are my details:
Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port. What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol. At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally. Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite? I’m hoping that a software update will fix this issue. -
Photos captured are not saving in my L520
This phone has a problem that the photos that captured are not saved in itself,the system of this is so slow and poor..this device is very pathetic.file transfer is so slow and some files received are not displayed.I will never recommend this phone and nokia phones to anyone.
Solved!
Go to Solution.Anyway..I tried soft reset and hard reset,..now its ok.My other problem is this phone is not able to send files via Bluetooth.I connected Samsung S with this phone,but my phone saying that the Samsung is not supporting sharing over Bluetooth.very bad
-
Wi-Finetworks are not saved as Known Networks
Hello everybody!
I recently updated my iPhone to 1.1.3 software and I have noticed that the networks I have joined before are not saved anymore, which is very annoying because I have to enter the password every time I want to join to any "known" network.
The "Ask to Join Networks" option is turned on on my iPhone, but it appears to be failing or something, I join to my home wireless network every day and I would like to not enter the password every time.
Before updating to the new software (1.1.3) my iPhone joined automatically to the saved networks, but I don't know what is happening now.
I have not changed any setting on my router, that's why I think the problem is in the 1.1.3 new software.
Any idea?
Thanks in advance!
Message was edited by: Luis AbrahamPosted below are possible troubleshooting steps that may assist with this issue
1. Reboot iPhone - Hold down the home button & lock button together till you see the silver apple logo. Now let go. And iPhone OS will reboot. Now test your WiFi again.
2. Reset Network Settings - Go to Settings-General-Reset-Reset Network Settings-Confirm. This of course wipes out all knowledge of any WiFi networks you were connected to including password. Please be advised VPN settings may also be reset and need to be set back up. Now test WiFi
3. If you have bluetooth on. Turn it off. Test WiFi again. If needed go to WiFi settings on iPhone. If your connected to a network tap on the blue circle and up on top tap on Forget network. Go back to WiFi settings and reconnect to that network.
4. Turn WiFi off then back on and test again
5. Toggle Airplane mode on for 1 min then off. Settings-Airplane Mode - ON 1 min then OFF. Now retest WiFi
6. Allow iPhone Batter to completely die out. Then do a full charge on it. Hopefully it dumps any temp memory during the discharge and draining of the electronics inside. Now test WiFi once fully charged
7. Restore iPhone. -This will erase all data and settings. So please only do this if everything you want back is on the PC/Mac. Make sure once you restore you set it up as new iPhone. If you choose restore from backup there is a small chance it could bring back a corruption that was may of been causing the issue
8. if you still have an issue. Power cycle your network equipment. Power down the Modem and Router for 5 min. Modem gets powered on first. Wait till all the lights are on. Then power router, Wait now test WiFi. (Please consult your ISP or Router Manufacture for assistance with power cycling your equipment.)
And one question. Does this occur on all WiFi networks? If so what security are you using? WEP? WPA? and What channel is the router broadcasting in?
Post back if needed -
In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?
Please don't post the same question multiple times!
-
Sent Messages are not saved in Sent Mailbox
It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful
The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server. -
Error message: "FireWire connections are not supported. To transfer songs"
I recently purchased a Monster iCarPlay to play my ipod in my car. I have had no problems until recently. Upon disconnecting my ipod from the iCarPlay wire, I the following message popped up: "FireWire connections are not supported. To transfer songs, connect the USB cable provided." It also prompts me to click the center button to dismiss the message. However, I'vd followed these instructions, and the message does not go away. Does anyone know what I can do to resolve this problem? Or is it anything to worry about?
That is the message you see when you attach a 5th gen iPod to a computer using FIREWIRE. so... i suspect that for some reason, the 3rd party iCarPlay device must be confusing the iPod into thinking it is being docked or attached to a data line of some type and not simply charging.
As for the sudden occurrence of the message, it does seem strange however, keep in mind that you are using a 3rd party device that may not be supported or endorsed by Apple at all.
Beavis2084 -
Some sent mails do not appear/are not saved in "sent messages" and are lost
i work with mail and 4 different imap accounts. about every 15th sent email "gets lost". i.e. i can follow the sending process in the activity window, and i hear the sending confirmation tone. and, usually, the mails even reach the receiver. BUT, the mails do not appear/are not saved in the "sent messages" folder and are lost. this is very unsettling, as there seems to be no recognizable pattern. can anyone help, or should i change to "entourage"? big thanks for replies
Message was edited by: BassolinoHi Bassolino and David,
I, too, have had this intermittent issue and wonder if you had found a solution?
In the past 3 weeks, two messages have been sent from my mac mail account, using the mail application (the only apparent common factor being that both messages had iphoto attachments), the recipients have received them - only I do not have a copy in my 'sent' folder.
They are not stored on the macintosh server either...
I have not altered any settings and this intermittent issue has just emerged.
Any help from 'Top Users' would be welcome. Thanks. -
Visio 2010 - Shape Data Fields Are Not Saving
I am having a problem with a number of shape data fields which are not saving data that has been entered into it, whether by entering it through the "shape data" or "define shape data" dialog boxes, or by editing the "shape
sheet".
All data fields appear to save normally while file is open, it remains as entered. However, when file is closed and later reopened select data fields do not retaining data correctly. Some retain nothing (null), or revert back to a "default"
value, see below for a couple examples:
Rack Units: Want to enter data as 1U, 2U, etc. ... in some cases it will save it as entered while in other cases it reverts to "1 RU", "2U", etc.
Room: Enter the data as I want it stored, most of the time it appears to come back empty, there are some shapes which will retain as entered.
Comments: Fails to retain any data
I have looked at a number of reasons to explain why, whether the problems occur with stencils is supplied by Microsoft, a vendor, or were custom created. Looked into whether it might have to do with a particular vendor's stencils/drawings
but I have a number of Cisco drawings where some save those fields as entered while others do not. I believe it could be a setting within the stencil preventing it from saving the data as entered, enabled in some cases and not in others.
I have checked "Protection" under the "Developer" tab, but nothing appears to be set to prevent editing/storing data entered.
Is there some setting(s) or field(s) somewhere that I can look at to allow this data to be saved as entered?
Is there a GLOBAL setting that can be set once within a file?
Thank you in advance for your time to assist me in fixing these problems. Have a great day!
MJ_NWE
MJ>Can I build logic so that they can't fill in a field unless the previous field has been filled in?
It's theoretically possible to do this (e.g. each field has an action
of removing read-only on the next). It's considered extremely bad form
design, because people don't always fill in fields in the order
specified. If you watch people with a form they fill in their name,
address, other easy stuff; then they go back for the harder stuff.
They may want to save a form because one piece of information needs
research.
What you might like to consider is a large splash "FORM INCOMPLETE" in
Red or whatever, which vanishes when all the fields are completed.
Aandi Inston -
AET Generated field values are not saved.
Hi Gurus,
I have created two AET fields on the screen (marked below) and that should store values in table CRMD_CUSTOMER_H. When I create a new service request and enter the values and save, AET field values are not saved. Again, when I edit the same service request and enter the values and save , AET field values are saved on the database.
While debugging I found that, relationship BTHeaderCustExt does not exist for the first time and second time onward its appearing. Due to this, data is not being saved at first time (Line no 27 : current is empty).
When tried to create realtionship using create_related_entity , it throwing exception cx_crm_genil_model_error.
Please advice me the soution for the same.
Regards,
Anandthere should be a context node at your view level. Please check ON NEW FOCUS method is implemented or not.
If not, you can implement that method with below code.
DATA: lv_collection TYPE REF TO if_bol_bo_col,
entity TYPE REF TO cl_crm_bol_entity.
* get collection of dependent nodes
entity ?= focus_bo.
TRY.
lv_collection = entity->get_related_entities(
iv_relation_name = 'BTHeaderCustExt' ).
IF lv_collection IS NOT BOUND or lv_collection->size( ) = 0.
IF entity->is_changeable( ) = ABAP_TRUE.
TRY.
entity = entity->create_related_entity(
iv_relation_name = 'BTHeaderCustExt' ).
CATCH cx_crm_genil_model_error cx_crm_genil_duplicate_rel.
* should never happen
ENDTRY.
IF entity IS BOUND.
CREATE OBJECT lv_collection TYPE cl_crm_bol_bo_col.
lv_collection->add( entity ).
ENDIF.
ENDIF.
ENDIF.
CATCH cx_crm_genil_model_error.
* should never happen
EXIT.
CATCH cx_sy_ref_is_initial.
ENDTRY.
me->set_collection( lv_collection ).
Maybe you are looking for
-
How to open a messageFileUpload in a new page.
Hi, I use a messageFileUpload to allow users to save a image into a BLOB column. When the file is uplaoded the component changes to View link. When the view link is clicked, a dialog window with option of open, save, cancel appears. If open option se
-
How to pass array of Object in A Procedure using OCCI.......
I m also trying for How to pass Object to a procedureb using OCCI... Steps.... 1. I created A type..... 2. Then I created a VARRAY using that Type. 3.After that I have written An Procedure with object as a parameter.. now using OCCI how do u bind the
-
If I purchased my iPhone 5 online, can I try and pick one up in the store if I bring in my receipt instead of waiting?
-
Hi, I need to setup port mirroring on Catalyst 4006 switch. Both source and destination port is on the same switch. I need to capture all traffics across the LAN for analysis. Is it enough by configuring SPAN? Please advise.
-
I can't get itunes video to work with my windows 7 64 bit system?
I have a windows 7 64 bit operating system and have loaded the version of Itunes designated for 64 bit systems. All of my audio content seems to work fine, but my video content is almost non-functional. If I try to play a movie or tv show, I get th