EA2 New connection dialog on mac not wide enough

The 'new connection' dialog on mac is not wide enough, it loses the 'connect' button which is rather unfortunate.
Resizing the window cures it.

Thanks - I've reopened the bug. The immediate work around is to drag and resize the window.
Sue

Similar Messages

  • With the new update my screen is not wide enough for the format. How do I change this?

    After the new update, the screen shows only 3/4 of what is presented. I have reduced the size of the print and that did not help. For instance, in typing this, once I got as far as "presented" the screen had to shift to the left to allow me to see what I was typing. It did this automatically. I don't know what caused this in the latest edition of the update, but it has caused me a number of problems in doing on line banking because unmovable windows do not show enough to allow me to hit the submit button.
    I want to see the entire window when I log onto a site. When I now open Yahoo News for instance, I cannot see the last three inches. I can see them if I move the page over, but up until now, I have always seen the entire page when it comes up without having to take any action on my part.
    Where do I go or what do I do to get it back to how it always functioned before?
    I opened the learn system and it references a Mozilla tool bar which I do not have either. Don't know if this is relevant or not.

    Hello,
    Firefox on Windows is now following display scaling options which may render text larger on high resolution displays. There's more than one way to resolve this problem. See the [[Webpages are large and blurry after updating Firefox - how to fix ]] article for one suggestion. Here's another possible solution:
    * Type '''about:config''' into the Firefox address bar and tap on the Enter key.
    * If the warning '''This might void your warranty''' appears, click '''I'll be careful, I promise'''.
    * Search for '''layout.css.devPixelsPerPx'''
    [[Image:Fx22layout.css.devPixelsPerPx]]
    * Double-click on layout.css.devPixelsPerPx to modify its value. The default is -1.0 in Firefox 22 and above. Change it to '''1.0''' to make it work like in previous Firefox versions.
    If necessary, further adjust the value in 0.1 or 0.05 steps. Use values between 1.0 and about 0.5 to reduce elements in size. Use values greater than 1.0 to increase size. For example, a value of 1.25 will increase font size to 125% to accommodate the default DPI setting in Windows 8. '''Double check the value that you enter.''' Setting a too small value will make everything disappear and a too large value will blow things up.
    If web pages still need to be adjusted then you can look at the [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level] or [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint] extension.
    To adjust the font size for the user interface, you can use the [https://addons.mozilla.org/firefox/addon/theme-font-size-changer/ Theme Font & Size Changer] extension.
    Did this fix your problems? Please report back to us!
    Thank you.

  • I damaged my iphone 5 and have been sent a new one, but i do not have enough storage to back up my phone and do not want to pay for more storage. can i get all of my contacts, photos, etc. on my new phone just by logging into my icloud account?

    i damaged my iphone 5 and have been sent a new one, but i do not have enough storage to back up my phone and do not want to pay for more storage. can i get all of my contacts, photos, etc. on my new phone just by logging into my icloud account?

    Not photos, just data synced with iCloud shown in Settings>iCloud.  If you don't have sufficient storage to back up to iCloud, back up to your computer instead using iTunes (connect you phone to your computer, open iTunes, click on the name of your phone in iTunes, go to ths Summary tab of your iTunes sync settings and click Back Up Now).  Also transfer your purchases to your iTunes library (connect your phone to your computer, open iTunes and go to File>Devices>Transfer Purchases). If you have photo stream photos older than 30 days tha you wan to save, save these to your camera roll before backing up (tap Select, tap the photos, tap the share icon -- box with upward facing arrow, then tap Save to Camera Roll).
    When setting up your new phone, when given the option choose Restore from iTunes Backup and restore the backup you made earlier.

  • Spreadsheet Add-in connect dialog box do not appear after clean EPM-install

    Clean install of EPM with allmost all values default.
    version 11.1.2.1 on Win server 2008R2 and office 2010 32bit.
    Smartview seems to function properly.
    My impression from the documentation is that an installation of spreadsheet add-in does not require any post configuration, but maybe I am misstaken.
    So what needs to be done for spreadsheet add-in to show connect dialog box?
    Grant some kind of access in shared services?
    Change some environment variable?
    etc etc.
    Edited by: 859699 on 2011-jul-20 05:30

    Seems as if there is something fishy with the Essbase Java API, can this cause trouble for the Add-in?
    When using the foundation diagnostic tool I get:
    FAILED SVR: Essbase Java API Launch external checker with next command: C:\Oracle\MW\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** xxxxxxxx:****** http://xxxxxxxx:13080/aps/JAPI
    Error: EPMVLD-01011: Result at EssbaseJAPIConnect.main(EssbaseJAPIConnect.java; Error message: 19)
    Recommended Action: Make sure external checker is working.
    When I try to launch that path manually I get: "The system cannot find the path specified."

  • Microsoft Remote Desktop Connection Client for Mac Not Working

    I recently purchased Office 2011 for Mac.  I work at home on my Mac at work on Windows 7.  I also have a work laptop, running Windows 7, that comes home with me.  My goal is to RDC my Mac to the laptop running Windows 7 to reduce desktop clutter, and easily work between machines. 
    I CAN NOT FIGURE OUT how to get Microsoft RDC:mac to connect to my pc. 
    I know that the pc allows remote desktop connections because I often use RDC at work from PC to PC.
    SOME PLEASE HELP!  I have spent hours and hours trying to figure this out and I think it is the time capsule that is causing the problem. 
    My research has found that I have to use port 3389 to get this done.  I am pretty computer savy but when it comes to networking I guess I have no clue.  I have tried just about everything a and can't figure it out. 
    Thanks to anyone that can dedicate some time to configureing my time capsule to allow for RDC.

    I cannot quite put together your whole network..
    I work at home on my Mac at work on Windows 7.  I also have a work laptop, running Windows 7, that comes home with me.  My goal is to RDC my Mac to the laptop running Windows 7 to reduce desktop clutter, and easily work between machines.   
    So this is in local lan.. the PC laptop running win7 and the Mac loaded with RDC software. If this is local lan then the issue is nothing to do with TC.
    That is only if you are trying to connect from work. to home through the router at work and TC at home. On local lan there is no blocking to ports. Are you using the local network IP of the PC Laptop?
    Explain a bit further as it needs a bit more clarification.

  • So, I have an external hard drive that was connected to my mac not able to access.

    Under Disk Utility I was able to see it how ever I was unable to access it. So I made a partition thinking that might help. However I think it erased that the disk? Can I recover or undo? or remove the partition? what can I do to get the information from it?? Please help!

    You have erased your drive, if this data is important stop using the drive immediately and contact a data rescue company, you may also try some of the data recovery software available, I have no recommendations for that stuff (I backup so don't have a need for recovery)

  • Mini + LG LCD: pix (res) not wide enough (16:9 vs. 4:3)

    hi... i'm wading through the responses and havent found an answer.
    i'm using my mini with a 37in LCD TV w/ 16:9 aspect ratio... not ale to utilize the full width of the screen
    the mini works great through both VGA and DVI and it seems to even recognize the model (DU-37LZ30) as it's indicated in the display prefs...
    however, it can't seems to display the full-width 16:9 picture. i get 1024X768 as a menu selection, but nothing wider (and anything smaller is much less-clear). i need 1920X1080, but cannot select it (not available in the prefs).
    anything out there to help unlock the lost 5in on either side of the screen? adjusting the TV simply distorts the picture or i loose the left side of the screen (apple menu),

    Hunter,
    I am not sure how much wisdom I can impart, but i am searching around to see if I can help you find a solution. I came accross this:
    http://tenant.com/images/mini/full/displayxsettings.png
    someone who connected their mini to their Sony hdtv with similar native res than yours I believe.
    I think what you call offsetting is overscan (correct me if I am wrong). Maybe this would do the trick..?
    Also, post on avsforums, they are really helpful there. Finally, have you seen the specs on the DisplayConfig website? Maybe there is some helpful info there...
    I'll keep digging as well. I just know plenty of people have connected their mini's to TV's via DVI, there has to be a way!!
    Gmas.

  • Why is the background of my site not wide enough on a tablet?

    I am testing the website I made on this url: http://www.beautysalon-piurity.nl/test/index3.html
    unfortunately when I view it on a tablet the background (which is a gradient white to green from top to bottom)  stops to soon at the right side, you can see this at the bottom
    I wonder why this happens?

    Your code is not correctly expressed.  CSS gradients are not background-image.  They are simply background:
    http://www.colorzilla.com/gradient-editor/
    Nancy O.

  • Burned Imovie on Dvd but the widescreen is not ' wide enough'

    What went wrong? I made an imovie and when i burned it on a dvd and played this on een widescreen television, about one fifth on the left and one fifth of the right was not showed. So long title texts were not entirely visible.
    My movie was filmed with a widescreen camera, on Imovie I could see everything perfectly, the television is a widescreen, so what went wrong?
    Could you help me?

    I have to take in account "safe area" 5-10% and avoid of placing significant elements there.

  • SM30: ALV Display not wide enough for Table display/scrolling?

    How can I widen this?
       Thank-You

    Go to The Fucntion group of the Table maintenance Generator and Go to the screen which you provided in the Table maintenance Generator creation step. Go to layout of the screen and change the Height and width etc of the Table control.

  • New Gallery in JDeveloper does not show all items

    My New Gallery dialog box does not contain Web Tier. Please Suggest.
    All I see is
    General
    -Applications
    -Connections
    Business Tier
    -Web Services
    Database Tier
    All Items

    Which JDeveloper version and which packaging?
    Also are you looking at project technology or all technology (tab at the top of your new gallery).

  • [New Connection][Oracle][ssh]

    Hi,
    I have just installed SQL Developer on a Windows XP platform.
    I need to connect a distant Oracle database which is on a distant LAN.
    The problem is that the host is not reachable from outside.
    Usually I connect to the distant LAN using SSH and then connect myself to the Oracle database throught the SSH session.
    I haven't seen SSH parameters (such as "login" "password" and "host") in the New Connection dialog box.
    Is it possible to connect myself to this Oracle database with SQL Developer ?
    a+, =)
    -=Finiderire=-
    PS : I'm a french guy and I apologize for mistakes.

    Bonjour,
    Sql Developer connects to the database with JDBC drivers. As far as I know those don't support stuff like SSH.
    If you have a visual interface through the SSH session, I'd install sqldev on the server (or another machine in the remote network), so you'd connect to that.
    K.

  • Excel Ad-in Create a new connection

    Hello,
    I have installed the Oracle BI for Microsoft Office and now I'm trying to create a new connection but I'm not sure What I have to write in the different spaces.
    Server Name: BI Office (whatever I want)
    BI Office Server:
    Application Name:
    Port: 80 (by default)
    To fill the BI Office Server and the Application Name, I just have a computer name called PMEVM and that's all because I'm installing in a virtual machine out of a domain.
    Thank you!

    Hi,
    have a look at this thread: Creating connection to SQl Server
    In case you use Windows authentication then you should put the native SPPI library (ntlmauth.dll, it comes with the jtds distribution) anywhere in the system path (defined by the PATH system variable) and you're all set.
    If you use SQL Server authentication, then you will not need this dll into your system path.
    Florin

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

    I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

    Hi ashleydanc588,
    If you are interested in more information on using an iMac in Target Display Mode, including what machines are compatible, you may find the following article helpful:
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/ht3924
    Regards,
    - Brenden

Maybe you are looking for