EA2700 not getting IP from modem
Just received this new EA2700 router the other day, have noticed this problem has been reported a few times in other forums.
Went from a WRT54G connected to a DLINK 202 modem, actually they had no problem, I was just upgrading, when swapping out the router, I noticed it took a very long time with many reboots of modem and router to get an IP, which is set for DHCP from Comcast. The old combo would get an IP within a minute of a reboot. So, just to complete my upgrade, I bought a Motorola 6141 modem, had it set with new MAC at Comcast, same problem with router trying to get an IP.
I did find if you reboot the modem by itself, last, while router is up, the router will get an IP within a few minutes. But, if they are both rebooted together or if the router is rebooted by itself, it will not grab an IP. I have not seen a solution for this "known" problem in all the forums I have read, I have seen quite a few people become very frustrated and just give up on their EA2700 or buy something else.....firmware is latest, I've tried MTU at 1365, IPV6 off/on, resetting, running install app, same problem. So unless someone has the real answer for this, I could be one of those swapping this for another model or brand, I'm afraid.
Khan,
The problem of users not getting IP from the DHCP usually happens when 'spanning-tree portfast' is not enabled on access ports. PCs don't wait long enough for DHCP responses and time out.
Can you make sure all the access ports, to which the users are connected to, have spanning tree portfast enabled.
HTH,
Sundar
Similar Messages
-
Characterestics is not getting displayed from ODS in Multiprovider
I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
Can anyone help me in it?How many requests do u have in the ODS?
If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
What is the message u r getting when u r trying to delete the request?
Khaja -
I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.
Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
Excise rate and value is not getting defaulted from the purchase order
Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
VishalHi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs -
Could not get IOR from Domino Server while provisioning Lotus Notes
Hi all,
There are two servers that have OIM installed, development server and test server. From development server, we can
provision to Lotus Notes just fine. But for test server everytime when
provision to Lotus Notes. There will be an exception
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
From test server
I can access the URL http://10.3.100.61:63148/diiop_ior.txt using Internet Explorer
I can telnet to 10.3.100.61 63148
I can use connector testing program and it work fine
All configuration and jar files are the same as development server
There is no firewall or antivirus running in both systems.
Both server is virtual server using VMWare.
OS: Windows2003R2 Enterprise
DB: Oracle 10gR2 10.2.0.2
AS: Oracle AS 10g 10.1.3.3.0
OIM 9.1.0
Lotus Notes Connector 9.0.4.2
Thank you.
Satit
The error is as below
=================================================
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Host 10.3.100.61
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Port 63148
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Admin Pongtape Ungkawanish/Telecom./Central Support/Fin./KK_Bangkok/TH
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Certifier OU
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Before session
08/11/11 11:24:26 Running setTimeoutParameters
08/11/11 11:24:26 Running Connect
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
ERROR,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
at lotus.domino.NotesFactory.getIOR(Unknown Source)
at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
at lotus.domino.NotesFactory.createSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
... 45 more
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],Unable to connect to the target. Attempting to reconnect after delay of 2000ms.......
INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
ERROR,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
at lotus.domino.NotesFactory.getIOR(Unknown Source)
at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
at lotus.domino.NotesFactory.createSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
... 46 morecheck if DIIOP service is turned on at the Lotus Domino side...
Oleg. -
Iphone 5 not getting text from new numbers?
im on ios 7.0.4. Recently, ive been having the problem of not getting messages from new numbers. I receive all texts and calls from all current phone numbers ive ever had contact with. But for the past month, any new numbers that text me first, i do not receive them. But if i text and or call them first, it works fine. Which isnt always a convinence. They sent me screen shots of my number and their text; they all have different phones on different services.
Perk123, this is a text messaging mystery! I'm on the case. I recommend that delete all unwanted text messages on your device and power it off/on to soft reset it.
You will also need to advise your friend that has the AT&T iPhone to reset the network on their device. This can be done by accessing Settings >General >Reset >Reset Network.
Lastly your friend needs to verify if your contact has been set up to block calls and text messages from your mobile number. This option is located in Contacts >your contact> Block this caller.
Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport -
Data not getting fetched from Quotation to Contract
Hi,Myself new to TM. I have a ticket mentioning data not getting fetched from quotation to contract. How to solve it? Please help...
Message was edited by: Michael ApplebyPlease add the version of the TM product and which SPs have been installed. Also more information on the quotation and contract.
What do you mean by ticket? It you mean an error message, from where are you reading the message?
Regards, Mike
SAP Customer Experience Group - CEG -
i formatted my computer and now i would like to sync my music from my iphone back to the computer, is there any way to do this? i don't want to loose my music. p.s. all my music that was on the computer was there privately, i did not get it from itunes.
See Recover your iTunes library from your iPod or iOS device.
tt2 -
RFC problem: could not get functionname from XML requst (sic)
I'm developing an interface that attempts to call a receiver RFC on an SAP 4.6c system. It's a very small simple interface, and it's all working until it tries to call the RFC. The error is
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
I've created an RFC channel, which is green in the adapter monitoring. The RFC imports without a problem, and appears in my interface mapping. My mapping program converts to the RFC message type (as evidenced in sxmb_moni. I have a receiver agreement referencing the interface mapping, which must be working as the mapping is called.
Could anyone point me to what else I could check? I saw a post about the same error message, where the respondent found something in the logs which helped them Could you expand on what you found, and in which log please? Any pointers as to which logging options I could switch on and check would be gratefully received.
Regards
Alan GrahamThanks for the responses.
I set up a communications channel of type RFC, which is
showing green in the adapter monitor. If I deliberately
break it, eg by changing the password, the adapter shows
as red in the monitor. I assume therefore that the
adaptor settings are correct.
The XML going to the adapter looks correct AFAIK. My problem is that I don't know enough about the requied XML to know if what I'm seeing in the logs is sufficient. In SXMB_MONI, in the 'call adapter' section of a failed message, the outbound binding includes
<SAP:ToInterfaceNamespace>urn:sap-com:document:sap:rfc:functions</SAP:ToInterfaceNamespace>/code]
Also, the interface determination SOAP header, in the MAIN section includes
[code]<SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>D04</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">Z_MPU_3PSCE_FREIGHT_UPLOAD</SAP:Interface>
</SAP:Receiver>
These are the correct values for the RFC name and the namespace, AFAIK.
I'm using an interface mapping (which uses and ABAP class as the mapping program) which references the interface of the RFC. The logs tell me this works, ie, the class is called and the resulting XML appears in the payload of the response.
Alan -
Mails not getting sent from Receiver Mail Channel
Hi ALL
I have a File to mail scenario , I see chakred flag in SXMB_MONI ..but mail are not getting triggred from the Receiver mail adapter..
I gave the URL like this smtp://sxd123.abc.com
and the respective E-mail ID's
I dont see any message in the communication channel monitering also ..wht could be the reson.. ?
Thanks
SouzHi Dominic,
Since you are not seeing any entry in the communication channel (receiver), I think there is a problem with your configuration. Check whether you have used the correct channel (of type MAIL) in the receiver agreement.
Regards
Suraj -
Hi,
I am doing RFC to File. I could generate the FILE successfully. But I am not getting Response from RFC. I am getting empty payload. I am doing with out BPM. I did succesfully File-RFC-File. but here RFC is the sender. I have some doubts in defining Interface mapping and Message Mapping. Is this a Syscronous scenario by default ?
If I want to get the resonse of RFC to a file. How many Receivers and Senders do i need to create?
Regards,
Varun
Edited by: Varun on Sep 9, 2008 1:00 PMhi,
Map Rfc.response to the File; hence rfc sender adapter and file receiver adapter..one sender n 1 receiver.Remember:
1. In the report that makes the call to XI , make sure that you use call RFC in a background task.
2. Make sure you use Commit Work at the end of the report.
Follow:
Send RFC to SAP XI Asynchronous
Also pls visit
Re: RFC to FILE
for the same scenario.
Thanks,
Durga
Edited by: NagaDurga Nannapaneni on Sep 9, 2008 10:55 AM -
Item Number not getting copied from Delivery to Invoice
Dear Experts
I am having a problem where Item Number in Delivery is 10 and in Invoice it is 11. The item number is not getting copied from Delivery to Invoice. I have checked the copy control option and copy item number is checked.
Please adviseHi,
In VOFA Item no. increment has already been maintained as "0" but the problem is still there.
Regs -
Purchase Req & Standard PO - Price is not getting Defaulted from Price List
Dear All,
Hope you are doing good!!!
We are implementing R12.1 for one of our client. This query is pertaining to the Advance Pricing with Purchasing. Infact client wants to default the Purchase Requisition and Standard Purchase Order Price from Price List.
I have done entire setup and defined ASL for this reason. But still price is not getting defulted from Contract Purchase Ageerement.
What could be the reason. Its an standard fucntionality but still its not picking up.
I would really appreciate if someone could help me on this. Its URGENT.
Thanks in Advance.
Thanks & Regards,
AdityaLet us go through the steps involved in integrating Advanced Pricing with Purchasing so that we know if we have missed anything.
1. Create Price Lists in Advanced Pricing.
2. Setup Profile Options in System Administrator responsibility:
QP: Licensed for Product - at Application: Purchasing level = Purchasing.
QP: Pricing Transaction Entity - at Application: Purchasing level = Procurement
( Site level - ‘Order Fulfillment’ )
Profile option can be set at site, application, and user levels.
QP: Source System Code – at Application: Purchasing level = Oracle Purchasing
( Site level -- ‘Oracle Pricing’ )
Profile can be set at site and responsibility levels.
QP: Item Validation Organization - at Application: Purchasing level = null
( Site level -- specified in Financial Options )
Profile option can be set at site and responsibility levels.
3. Add item to the Price list Advanced Pricing ->Price Lists -> Price List Setup.
Enter the item/price/dates etc.
4. Create Contract Purchase Agreement.
5. Create Approved Suppliers List. In the Source Documents, select the Type as Contract and reference the Contract Agreement Number.
Create the Sourcing Rule and add the Rule to the Assignment Set.
6. Create the Standard Purchase Order referencing the Contract Purchase Agreement in the Reference Documents.
The Price listed should be defaulted from the Price Lists.
Cross-Check the following steps and let me know if it still fails and we can try to resolve from then on :) -
Standard PO workflow giving error due to Release coe is not getting passed from event
Hi Team,
I am getting the below error while processing the Standard workflow for PO.
I think its due to the Release code is not getting passed from Event to workflow.
Can you please sugest from where the release code is getting fetched before triggering the event.
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM)Hi
Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
Or by Trevor Ticehurst on Oct 9, 2008 3:39 PM at: http://scn.sap.com/thread/1080411
OR
http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
All these mention certian notes which may be helpful.
However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
regards,
Modak -
PO is not getting released from SRM
Dear Experts,
I am configuring SRM-SUS Scenario on SRM 7.0. I have set up all SRM, XI and SUS cofiguration.
(SRM - SHDCLNT901, XI - XHDCLNT500, SUS- SHDCLNT951)
Shopping Cart and PO is creating fine but PO is not tranferring from SRM to SUS.
when i checked SXMB_MONI in SRM, there is no messeges showing there. It means PO is not getting released from SRM.
Kindly let me know is there any t-code for enable communication between SRM and SUS?
I have correctly configured XI and also transferred vendors from SRM to SUS through SupplierPortalTradingPartner_CreateOrChange_Out messege type but
PurchaseOrderRequest_Out for PO transfer is not getting triggered in sxmb_moni in SRM.
Thanks in advance.
Regards,
Pawan KeshwaniHi,
Thanks for your reply.
I have configured Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
(CCMS monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
I am configured ESOA Architecture in XI for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
Not getting any messege in SXMB_MONI in SRM.
Regards,
Pawan Keshwani
Maybe you are looking for
-
Hi, Created IBASE in IB51 and that was visible in IB52 & IB53 but when I'm trying to search in Interaction centre the IBASE is not coming up..do we need to make any more settings to make it reflect in IC ...please advise.
-
SATA II Drive on K8N - SLI Mobo
Hello Folks, Please can you give a few words of wisdom on the following topic: I've recently upgraded to the K8N - SLI mobo with AMD 64 3200 CPU, 1GB ram and a Hitachi 250gb SATA II drive. I booted from the WinXP disc, selected F6 to install addition
-
Can't Publish Site, Can't Access iWeb
I am so far beyond frustrated it's hard to think straight. I have been having nothing but problems with iWeb for weeks, and I can't find any answers or help. Ever since I got the notice that .Mac Homepage is going to be retired, I have been trying to
-
I deleted an item in my purchases, how do i get it back?
I deleted an item in my purchases, how do i get it back?
-
Question about using Macbook in Vietnam.
I have a question about using Macbook in Vietnam. I bought my mac here in the US, and I'm going to visit Vietnam, but I'm wondering if I can plug in the power directly into the wall or I have to need any convert power modem for my mac. The only thing