EA3500 - cut speeds down to 1/3

Pros: i didnt have to send it back bought it local cause my router craped out.
Cons: this thing cut my speeds down to 1/3 of what my 30 dollar netgear router was delivering.had to replace it after i dumped a cup of coffee on it. the linksys droped wireless 4 times in the first night ontop of it plus the signal was real weak. i have set up plenty of routers this was up and running in couple minutes but not running very well and no mount knew that going in
Other Thoughts: going back to netgear or dlink depends on what they got at the store cant wait for it to be mailed have 8 desktops 4 laptops 2 ipods and 2 phones and a nas that needs to be up

As you mentioned that the speed cuts down and the wireless connection is intermittent with this router, you can try few things to fix it:
(a) The security set on the router should be WPA2/WPA mixed mode.
(b) Try to change the wireless channel to either 1, 3, 6, 9 or 11.The following link shows how to change the channel on the router http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...  
(c)Try to reduce the router's MTU size to 1400. The following link that shows how to reduce the MTU size http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=66270e5d0d4347d087102f2bfef7116d_3742.xml&pid=80&r...

Similar Messages

  • Is there simple way to easein speed up and ease out speed down in timeline?

    I have one timeline (one footage), and there is a section, i want to speed up then back to normal.
    I don't know how to do it...
    if anyone can teach me how to do it??
    I cut it out the section i want to be speed up (from normal speed and gradually speed up, then speed down to normal speed).

    TIME REMAPPING...very doable in FCP.
    Click on this link and then click on the TIME REMAP tutorial.
    Shane

  • I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    Non-destructive editing is an important feature of iMovie HD 6.
    iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
    So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
    One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
    Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

  • I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

    I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

    In your library, right-click the song you want to edit.
    select "get info".
    go to "options" and select the start and stop times for your first section of the song.
    click "OK".
    Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
    The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
    Now you can go back to the other version and repeat the process with a different  start/stop time.
    Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
    To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

  • Why does Telstra slow uploads speed down

    I have had ongoing issues with my internet connection over the last 18 mouths.Having a upload speed of 450/650 Kbps  very slow no good for gaming an down load of 8/11Mbps down load if more than I needTo the point I have spent good dollars try to insuring   that the infrastructures and the Asset Integrity with in house are in best condition this includes the replacement and work listed belowReplacement of the Wi-Fi system to a Cat.6 cabling at a cost of $2,300Replacement of the modem with a high speed 1G port modem at cost of $ 475Replacement of the fly-lead for the Telstra house connection to the new wall socket a cost of $360Total cost of $3135 this spend was braced on Telstra recommendation as the problem was with my part of the connection after a large number of call to my internet provider I at last had a appointment with a Telstra Tec to carry line testing and fault finding .At this point if no fault was found  I was the be billed at $60 per 15min or part off and travel cost as I live in Bullsbrook WA this may I high . Lucky for me a fault was found in the exchange and reconfigured and the speed and the Exchange improved   to 22Mbps down and 15 Mbps up an outstanding numbers >test at the house 15Mbps and so 5 / 7 Mbps loss for the Exchange to house don’t to good but still very happy with it BUT the upload was 650 kbps /750Kbps and please remember this testing was carry out by Telstra with good equipment so at this point I ask why the upload was so slow? After spending over $2000 and lot of time on the phone only to be told that Telstra slow the upload speed down so the max you can get is 1 Mbps and the only way you can increase this is by paying for a business line but you still may not get any more than 1MbpsThis is only a very small part of the story SO I LIKE TO ASK WHY IS TELSTRA SLOWING ME DOWNIf you like to know more please let me know

    Hi bigdave618, 
    The simple answer is, that's the way the system and hardware is designed, all ISP's are the same. Uploads are limited to around 1Mbps. If you wish to get higher upload speeds you can see if Cable Broadband or NBN are available in your area as these systems allow for higher upload speeds.
    Upload speeds are generally slower than download speeds because of the fact that most internet connected equipment is asymmetric. Asymmetric means that any one packet of data can either go in, or out, but not both ways at the same time. Since most internet users are receiving more data than sending, the internet connected equipment has shifted the higher majority of the signals to go toward downloading.
    If you wish to find out more about ADSL I have added a link to a Wikipedia article below along with the link to the NBN and Telstra websites so you can check to see if Cable Broadband or NBN is available in your area.
    ADSL Wiki article: http://en.wikipedia.org/wiki/Asymmetric_digital_subscriber_line
    Check for available Telstra Cable Broadband: https://www.telstra.com.au/broadband/home-broadband
    Check to see if NBN is available in your area:  http://www.nbnco.com.au/connect-home-or-business/check-your-address.html
    - Ben 

  • BT turning speed down and latency up ??

    BT turning speed down and latency up ??
    Hi All & Happy new year
    Wanted to see if anyone else has seen the same issues as I have.
    Right 4 ISP's in the last 18 mths.
    1. Zen internet - perfect but expensive, 7mb down speed.
    2. Newcall (resold Tiscali ie TalkTalk) awful, ever degrading service, speed, latency and "locking/freezing" where had to reboot router to reinitialise connection to exchange.
    3. Idnet - perfect, 7mb again, issues disappeared the moment I switched.
    4. BT - same as TalkTalk - same old nightmare, and BT are not helping, denying any issues. (speed down to 3mb, latency v. high, rebooting router 3 to 5 times a day).
    In the above sequence nothing changed in terms of hardware or line. Did testing with faceplate off - 3 different routers - all same results.
    Changed to BT to save money, but it's been a bad move.
    I can only conclude that TalkTalk and BT actually restrict access and speed. If a third party can deliver superior service on all BT kit something is seriously off - it does not seem likely to be accidental.
    Any thoughts guys ?
    (Currently trying to get contract canceled as service not fit for purpose, (click and wait 2 mins, or click and nothing happens, reboot router and it's ok again for a little while, but speed way down).
    How do I get out of the contract and get back to a competent ISP ?
    Any thoughts or contacts gratefully received.
    (Apologies if broke any rules - first post).

    Sorry to hear that your  having issues with your BT Retail services.
    You will either be on the ADSLMax (upto 8mbps) service or if your exchange has been BTw 21cn upgraded you maybe on the ADSL2/2+ (upto 12/20mbps) service depending on your line quality and length.
    However these upto speeds may not be the speeds you will get as ADSL broadband connections are very dependent on the distance from your property to the exchange and the quality of your line. The further away you are from your local exchange the slower your broadband speed will be.
    To enable the community to help you please see the advice below:
    Please see Keith's help guide here: Helping forum members to help you, it will go through some checks that are needed for us to help you.
    A summary of the checks are:
    1a) Is your router/Homehub connected by a BT NTE5 master socket, Adsl Filtered Master Socket or Extension Socket?   Please bear in mind that extension cables and extension sockets can reduce the broadband's performance. If you have an Old LJU master socket then please say.
    1b) Have you tried the Test Socket? - if you have one. - Bear in mind that lots of manual distconnections/turning off the router/HomeHub will cause you more issues as the DLM will either reduce your sync rate, increase your noise margin or put you into a banded profile.
    2) Can you please run a BT speed test (including IP Profile) http://speedtest.btwholesale.com (not beta version)[Best done with a wired, Ethernet, connection] After Quick Test is done you need to click "Further Diagnostics" to get IP Profile.
    3) is there any noise on your line. dial 17070 option2 ,called quite line test, from landline phone. should be silent but slight hum normal on cordless phone.
    4) please post adsl line statistics 
    ADSL Line Statistic Help:
     If you have a BT Home Hub like the one below...
     Then:
     1) Go to http://192.168.1.254 or http://bthomehub.home
     2) click Settings
     3) Click Advanced Settings
     4) Click Broadband
     5) Click Connection or sometimes called ADSL (see picture Below)
    The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3.A firmware ending in 1.3)
    or http://bthomehub.home/index.cgi?active_page=9118 (for bthomehub3.A firmware ending in 94.1.11)
    You will need to copy and past all the adsl line statistics ( Including HEC, CRC and FEC errors). You may need to click " More Details"
     If you have a HomeHub 4 then the majority of the ADSL Stats shown in the previous Hubs will not be there.
    for HH4 users you can go to hub manager then select troubleshooting then logs and are look for 2 entries together which will show theconnection speed and noise margin for when your HH4 last sycned with the exchange.
    There are more useful links on Keith's website here: If you have an ADSL connection, please select this link
    Don't have a BT Homehub/Voyager?
    • http://192.168.0.1 for a netgear router and look for ADSL adsl statistics with information like noise margin and line attenuation, connection speed
    • http://192.168.2.1 for a belkin router and look for ADSL adsl statistics with information like noise margin and line attenuation, Data Rate
    I'm no expert, so please correct me if I'm wrong

  • Verizon DSL - High "Speed (down/up)" Low connection rate

    Hello -
    I am doing this for myin-laws, who live in a semi-rural area.  They have Verizon DSL, and have been having very slow connection speeds for the past few months (they have the 1.5-3 Mbps, and are getting between 200-700 kpbs.  Sometimes, for a few seconds, it can get as high as 1.1 Mbps, but it never gets to 1.5.
    I have tried lots of things.  We got a new modem, reset the D-Link router to factory settings, plugged the modem directly into the desktop, rebooted everything, then rebooted again, called Verizon and talked with their overseas people, who said they would have someone look at it.
    Everything, no dice. So I'm not sure what to do. 
    Here's one thing I noticed, however.  When I go into the Modem sign in screen, and look at it (It's the Red sign in, not the Blue, on a Westell 6000 DSL modem), they get a very high "Speed (down/up)" level.  Something like 1740 down, and 500-something up.
    But the actual downloads are nothing like that.
    Is that significant to anything? 
    My other situation is that I am not at their computer now (I am back in the city).  When I left their place, I did not know about these boards, and I can't remember any of the other information that is from the modem sign-in.  That one piece, however, seemed strange to me (a high "Speed (down/up)" level, but slow reality.
    As you think about it, could that lead to any clues or solutions I should look for the next time I go up there?
    Thanks for reading this.

    The closest proper sync rate that the modem would show for speed would be 1792/448Kbps, which would be the 1.5Mbps provisioning of the 1.5-3Mbps package. Verizon usually configures the speed lower if the line is not capable of holding a full 3Mbps or even an "optimized" flavor of it (which is ~2600kbps down, 640kbps up). Anyways, the next time you get the chance, I'm going to need the following information from their line:
    1: What do their modem Transceiver Statistics look like? If running a Westell modem, visit http://192.168.1.1/ , choose System Monitoring, Advanced Monitors and then click Transceiver Statistics. Post up what you see there. For ActionTec modems, check the Status pages of the ActionTec for DSL Stats. The address to ActionTecs are the same.
    2: Find out if the slow speeds are taking place all the time, or only during the evening hours
    3: Go to http://visualroute.visualware.com on their PC and choose the closest server to them. Let the Java applet load, and when it does it will show you a "Trace" box with your relative's IP address filled in. Press Trace and let it complete. When it completes, move the mouse over the second-last Circle (second from the right) and take down the name of it. If you see "ERX" in the name, please tell me.
    If you are prompted for a Username/Password while doing Step 1, try the following:
    admin/password
    admin/password1
    admin/admin
    admin/admin1
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Progressive speed down/speed up

    Is progressive speed up and speed down possible in Audition? How do I do this? I can only do speed up/ down but not a progressive one. If what I'm saying is vague, what I want to do is that the sound file will slowly slow down and speed up again after a few seconds. Thanks in advance!

    Do you want to preserve pitch and just change the tempo?  Or are you after something like a turntable slowing down then speeding up again?
    If the latter, have a look at Effects/Time and Pitch/Pitch Bender.
    If it's the first option, then I don't know of a way to do this but I'm sure others will be along with advice.
    Bob

  • FInal Cut Shutting Down

    Can someone tell my why Final Cut shuts down without warning. I've tried working on it multiple times this evening and it shuts down.

    You can try the usual, delete preferences, you can do it manually (FCP 7):
    Go to your Home directory then inside it to: Library > Preferences
    Drag com.apple.FinalCutPro.plist to the trash
    Scroll down to the Final Cut Pro User Data folder
    Drag Final Cut Pro 7.0 Prefs to the trash
    Drag Final Cut Pro Obj Cache to the trash
    Drag Final Cut Pro Prof Cache to the trash
    Empty the trash
    or http://www.digitalrebellion.com/pref_man.htm

  • Where can I keyframe speed up and speed down a clip

    In the old final cut pro there was a nice way to keyframe the clips speed percent up or down so you could have that slow motion and then all of sudden go int to normal or fast motion. With FCPX that feature was taken away.

    It can be done easily.
    Follow these instructions.
    Click on the images to enlarge them.

  • Final Cut shuts down when I try to stop logging and capturing

    Ok, so I know whoever answers will need more technical specifics but for now this is the deal. I have been trying to import footage from a DV camera into final cut and once I try and stop the camera or when I press 'esc' final cut unexpectedly shuts down. Any idea what's wrong? Thanks!

    Computer is a Macbook Pro, Version 10.4.11. Drive is a G-Tech - G-Drive 500 GB and I use a Firewire 400 when I connect it to my computer though I import straight into the computer from the camera with a firewire. Camera is a Panasonic AG-DVX100. I have Quicktime 7.6.4. My Final Cut Pro is 6.0.5. My capture preset is DV NTSC 48kHz. Device control preset is Firewire NTSC. Vid rate is 24fps, compressor info is DV/DVCPRO - NTSC and Data Rate is 2.9 MB/sec Not sure if I've given you enough information. I also have a report from when it crashed if it helps any. Thank you.

  • Final Cut shuts down on new Mac Pro

    Hi all,
    We've got a new Mac Pro: 3 GHz dual core, 9 GBs of RAM. We've installed Final Cut Pro 5 (via the universal crossgrade and Studio Upgrade).
    When Final Cut is opened the preview and program windows are green and will not show video. If Final Cut is shut down then re-opened Final Cut crashes on opening. We've been on the phone with Apple Tech support and the last action they suggested was reinstalling OS X, then re-installing Final Cut Pro. We've done so, and have the same problem.
    Thoughts? Suggestions?
    Thanks much in advance,
    Joey

    Let's look at the crash log... When you crash, you get the option of Reporting to Apple? Take that and copy this section of the log:
    Command: Final Cut Pro
    Path: /Applications/Final Cut Pro HD.app/Contents/MacOS/Final Cut Pro
    Parent: WindowServer [117]
    Version: 5.1 (5.1)
    Build Version: 4
    Project Name: FCPApp
    Source Version: 602161028
    PID: 1460
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
    Thread 0 Crashed:
    0 ...lCutPro.Plugins.QTRtEffects 0x061eea90 KGSetQTRtResFile(unsigned char, short*) + 72
    1 ...lCutPro.Plugins.QTRtEffects 0x061f5b08 RTEffectComponentRegister() + 96
    2 ...lCutPro.Plugins.QTRtEffects 0x061e521c PluginStart + 2028
    3 com.apple.FinalCutPro 0x001b23e0 DispatchRegisterMessage(void*, void*) + 104
    . - buncha info -
    25 com.apple.FinalCutPro 0x002c10a8 main + 64
    26 com.apple.FinalCutPro 0x00002c24 _start + 340
    27 com.apple.FinalCutPro 0x00002acc start + 60
    Thread 1:
    0 libSystem.B.dylib 0x9002c128 semaphorewait_signaltrap + 8
    That's the kinda thing we need...But only the crashed section, not the entire log - like the example above. Do not post the entire log. Also, you can check the console log (/Applications/Utilities/Console.app) for any messages...
    Patrick

  • Speed down again !

    Hello,
    A few months ago i experinced this and its happened again today, usual thing with the BT Customer Service - No help at all wait 5 days and some one will call you back etc.
    Well last time i came here i got th problem sorted so hopefully i can again :-)
    My HUB is the version 3 (black one)
    This is the info which i found -
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    1 days, 01:57:12
    Downstream:
    2.469 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    23.6 dB / 25.0 dB
    Line attenuation (Down/Up):
    36.6 dB / 20.5 dB
    Output power (Down/Up):
    18.9 dBm / 12.4 dBm
    FEC Events (Down/Up):
    592423 / 25
    CRC Events (Down/Up):
    1328 / 13
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    8021 / 22
    Error Seconds (Local/Remote):
    903 / 56
    The test i did earlier today is the following -
        Download  Speed
        1.94 Mbps
    0 Mbps    2 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 1.94 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :2.53 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 2 Mbps
    You can see the ip is fixed again because i usually do get brilliant speeds of 5-7 mbps which for a 8mbps connection is good but this happens every 2 -3 months, fibre is installed near us and we have everything on my village but the cabinet is not enabled yet.
    Hope fully i can get some help, i cant even use Youtube etc.
    Thanks in adavance.
    Henry

    it's not th ip profile that is the problem it is you lower than normal speed due to your very high noise margin of 23.6db.  have you been having problems with your connection dropping or have you been manually been resetting hoping to get speed back or a combination of both?  you need to leave connection with no resets
    try quiet line test  dial 17070 option 2  should be quiet and best with corded phone  if cordless then dull hum normal
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • System speed downed When I updated Maverick ?

    System speed very downed When I updated Maverick, each and every applications getting very slow to open some applicatons not support for maverick

    Slightly irritated with the change.  Everything is sluggish and updates to existing apps are failing left and right.  This may be enough to make me change my mind about apple...

  • Post Moved download-speed-down

    Moved http://community.bt.com/t5/BT-Infinity/download-sp​eed-down/td-p/692496
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    FAQ
    1. Best Effort Test: -provides background information.
    Download  Speed
    36.17 Mbps
    0 Mbps
    0 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 36.17 Mbps
     For your connection, the acceptable range of speeds is 12 Mbps-0 Mbps.
     IP Profile for your line is - 38.72 Mbps
    2. Upstream Test: -provides background information.
    Upload Speed
    8.38 Mbps
    0 Mbps
    10 Mbps
    Max Achievable Speed
    Upload speed achieved during the test was - 8.38Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 10 Mbps
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    The above was the results of testing but it still takes ages to open pages on the internet. I dont know enough to mess about with my computer which I cannot afford to replace. Any advice would be grateful.  I've cleared my history, defrag. done a virus scan which showed nothing wrong.  Help!

Maybe you are looking for