EA3500 Device List many many dupplicates

I have been using this EA3500 for a while and I'm like it. The one issue is seeing what devices are on the network. The list of attached devices ends up with some of the devices listed many times (my desktop computer is currently listed 34 times). And sometimes devies don't show up at all. I havent' found any way to fix it or even clear the list short of doing a factory default reset on the router, and within a day there are dupplicates again. Any ways to fix this or at lest clear the list w/o havving to reset the entire rdevice

I recommend doing the following if you haven't upgraded yet or just reload the current version to ensure a clean install of FW:
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file.
5. Turn on one device at a time and Reserve the IP address for each device. Graduate adding and reserving until your done. 
davep15 wrote:
I have been using this EA3500 for a while and I'm like it. The one issue is seeing what devices are on the network. The list of attached devices ends up with some of the devices listed many times (my desktop computer is currently listed 34 times). And sometimes devies don't show up at all. I havent' found any way to fix it or even clear the list short of doing a factory default reset on the router, and within a day there are dupplicates again. Any ways to fix this or at lest clear the list w/o havving to reset the entire rdevice

Similar Messages

  • HT1415 You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to an

    You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to any other device and you must watch it on that device.
    This is a confusing statement. Can really move the rental between devices or not???  

    If you originally downloaded it to a computer, yes. If you originally downloaded it to an iOS device, probably not; if you want to try anyway, use the Transfer Purchases function in iTunes.
    (85739)

  • In Client Operations Download Computer Policy is listed many times and says Expired.

    In Client Operations Download Computer Policy is listed many times and says Expired. I'm not sure how to remedy this.
    Thanks
    James A+, Network+, MCP

    Hi,
    When it is set as expired it means that the client has perfomed the task in question and the information in the console is just for historical reasons and will be cleaned out automatically from the Console/DB by one of the Site Maintenance Tasks.
    So there is no error and nothing to do in this case just sit back and wait for it to be cleaned up.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Linksys EA3500 and missing devices on device list

    I have an EA3500 (N750) and I have a few devices that I know are connected to my network, but aren't showing in my device list. Particularly, they are an Android phone and a iPod Touch. Other phones and computers show up just fine in the list (iPad, laptops, desktops, etc). I've verified they are being assigned unique IP addresses by looking on the devices themselves and I have no connectivity errors, but they fail to display in the list. I'm not sure where to start.

    catboy102 wrote:
    I have an EA3500 (N750) and I have a few devices that I know are connected to my network, but aren't showing in my device list. Particularly, they are an Android phone and a iPod Touch. Other phones and computers show up just fine in the list (iPad, laptops, desktops, etc). I've verified they are being assigned unique IP addresses by looking on the devices themselves and I have no connectivity errors, but they fail to display in the list. I'm not sure where to start.
    They may just show up as Android or Network Device. If you find out which IP Address they are getting us DHCP reservation to assign them those IP Address and Label it so you can recognize the device.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • When I select an album to play the first song gets listed many many times on upnext and is the onyl one to play..help

    When I select an album to play the first song gets listed many many times on upnext and is the only one to play..help

    Figured it out.. Had the repeat set to 1...so it lists the first song multiple times....

  • HT201318 If I have run out of room on my icloud, does this mean that apps or photos will not be downloaded to my other devices? Many thanks for your help

    If I have run out of room on my icloud, does this mean that apps or photos will not be downloaded to my other devices? Many thanks for your help

    Welcome to the Apple Community.
    Apps in iTunes in the cloud and photos in photostream do not use your allocated i~Cloud space.

  • Apple TV doesn't show up in my iTunes devices list

    Hey, I tried to post this question an hour ago but apparently my crappy 2.16 GHz intel 2 core duo iMac with 3 GB, 667 MHz DDR2 SDRAM can't handle anything else while it is pointing out in iMovie '09 that none of my HD video is stable enough to take advantage of the stabilization feature.
    Anyway, here's my second attempt at seeking assistance for the most pressing of the many complications I am faced with as a Mac user.
    I can no longer see my Apple TV in the list of devices in iTunes on my iMac. This happened after I downloaded the most recent software update for my Apple TV, and after my step-father-in-law hooked me up with a home entertainment system. I have noted below with "CHECK!" the tasks I have performed in my attempts to maintain a love affair with Apple:
    Verify that you have the latest version of iTunes installed. CHECK!
    Verify that you have the latest version of Apple TV software installed. CHECK!
    Verify Apple TV is powered and properly connected to your television and you can navigate the Apple TV interface. CHECK!
    Verify Apple TV is properly connected to your network and the network is properly configured. When configuring Apple TV, if you do not see your wireless network, exit the selection screen by pressing the Menu button then go back in and the software will rescan. DUMB THIS ONE DOWN, APPLE. HOW DO I VERIFY APPLE TV IS PROPERLY CONNECTED TO MY NETWORK? WHY NOT SAY, "CHECK THAT APPLE TV SHOWS UP IN THE iTUNES DEVICES LIST" AS A TROUBLESHOOTING OPTION WHEN SOMEONE SAYS THAT THEIR PROBLEM IS THAT THEIR APPLE TV DOESN'T SHOW UP IN THEIR iTUNES DEVICES LIST". THAT'D BE HELPFUL.
    Verify network connectivity on Apple TV by playing a movie trailer in Movies > Trailers. CHECK (BUT *** IS THAT "BIG MAN JAPAN" MOVIE TRAILER ABOUT?)
    Verify that the computer you are using can access the iTunes Store. CHECK!
    If you're using Apple TV in a school or office environment, make sure Apple TV is on the same network segment as your computer (check with your network administrator) or else iTunes won't see Apple TV. NOT APPLICABLE
    For more information on how to properly set up your Apple TV, see the Apple TV Users Guide. UH, I BOUGHT THIS THING 1.5 YEARS AGO. DO I NEED TO REALLY GO BACK TO THAT?
    Restart iTunes (Quit or Exit and then reopen iTunes). CHECK!
    Reconnect Apple TV to iTunes OH THANKS. THIS IS GOOD ADVICE. *** DO YOU MEAN BY RECONNECT APPLE TV TO iTunes?
    If that doesn't address the issue, then:
    Reset HOW?
    Restart your computer. CHECK!
    Rejoin network (wireless) and/or Restart your network router ***? HOW? WHERE TO I CLICK?
    Reinstall iTunes OH SNAP! I'LL DO THAT IF NOBODY HAS ANY BETTER ADVICE.
    If you have Mac OS X 10.5 (Leopard), click here for information on configuring Firewall. SHOOTSKIE, I WILL NEED TO GO BACK TO THE WEBSITE TO CLICK THAT LINK.
    For Mac OS X 10.4 and earlier, make sure UDP port 5353 (Bonjour) is open on your firewall. If you use Windows Firewall, follow the steps here. SHOOTSKIE, AGAIN, NEED TO GO TO WEBSITE TO CLICK LINK, BUT I AM HOOKED UP THROUGH A WIRED CONNECTION DO I STILL NEED THIS STUPID PORT STUFF?
    Otherwise, if you use other firewall software or hardware, check the software documentation on how to open UDP port 5353. IT IS SO COMPLETELY, RIDICULOUSLY LAME THAT "OPEN UP UDP PORT 5353" EVEN NEEDS TO BE PART OF THE INSTRUCTIONS FOR GETTING MUSIC FROM YOUR COMPUTER ONTO YOUR TV."
    If you use Windows, try disabling services and startup items that may be conflicting. UHH, WHY WOULD I EVER HAVE WINDOWS? I SPEND 10-12 HOURS A DAY ON WINDOWS AT WORK, CRASHING MAYBE ONCE EVERY FEW WEEKS. I SPEND 30-60 MINS A DAY ON MY iMAC, CRASHING 1-2 TIMES A DAY. SERIOUSLY THOUGH, WINDOWS ***** TOO. TECHNOLOGY *****. PERIOD.

    Hi everyone. I am typing here on my brand new 24-inch iMac. So far it's great! However, the issue I had with the Apple TV is unrelated to the iMac itself, and I wanted to let everyone know what the solution was to my Apple TV issue.
    Until early this Sunday morning when I discovered this solution, my iMac would not sync with the Apple TV. This problem began after the most recent Apple TV software update. I neglected to mention in my previous posts that my Apple TV was connected to the Internet via an Ethernet connection.
    Prior to the most recent software update, I believe that my Apple TV communicated wirelessly with my iMac and via an Ethernet connection to the iTunes store. With the latest Apple TV update, the sync between the iMac and the Apple TV does not work if the Apple TV is connected to the Ethernet. My solution was as follows:
    1. Disconnect the Ethernet cable from the Apple TV. Do not reconnect.
    2. Restore Apple TV to the factory settings. I'm not in front of my Apple TV at the moment but navigating through the Apple TV menu to reset the settings was fairly straightforward for me.
    3. After resetting the factory settings and following the instructions, I was able to see the Apple TV in my computer's iTunes, but I was stuck with the super old software version from summer '07 when I bought this thing (i.e. before you could rent movies or watch anything in HD on the Apple TV).
    4. Look for the software update on the Apple TV (again, fairly intuitive by navigating the menu on your TV) and download/install the latest update.
    5. If your problem was due to having your Apple TV connected to the Ethernet, I think this should do the trick! It should now show up on your computer's iMac and it should automatically start syncing your iTunes content although I did have to direct it to sync my photos.
    p.s. Does anyone know how I can let Apple know that this issue exists with the latest Apple TV update? The guys at the Genius Bar at the mall I went to in Pleasanton, CA couldn't find any notes in their knowledge database about issues with the latest Apple TV software update and I think it's important that Apple knows about this.
    p.s.s. I think Apple should make all of us, their consumers, more aware of how to let Apple know about these issues because this issue was so frustrating and throughout the whole troubleshooting process I felt very helpless and would have felt so much more positive about Apple if I just had a forum in which I could let Apple know I was having this issue (above and beyond this user forum through which I ended up losing much of my iTunes album artwork after following one person’s advice).
    So if that forum exists, please let me know and let's brainstorm as to how to get more people like me to be aware of that forum so other people don't experience the same frustrations I have experienced.
    p.s.s.s. I haven't tried reconnecting my Apple TV to the Ethernet in my home. While it will probably be slower to rent and download movies wirelessly, I don't care that much as I'm thinking I will start renting movies through Netflix instead and just use the Apple TV to watch my homemade videos on my TV.
    But I am curious, why does Apple charge so frickin' much to rent a movie on the Apple TV? $4.99 for an HD movie? Everyone who has NetFlix tells me it is sooooo much cheaper and very easy to use. And to be honest, this makes me mad. Not that there is a cheaper option for renting movies/TV shows. That makes me happy. What makes me mad is that Apple charges so much to rent a movie when it doesn’t benefit them and it doesn’t benefit me. I think Apple does a lot of good things, but I think being able to rent (or even better, to subscribe to) media that you can watch (almost) instantaneously in your home is the wave of the future and still relatively new. If Apple wants to make money off of this service in the long term, they need to start by offering movies for super cheap, even taking a loss off the price they pay the production companies if they have to, because right now it's still all about adoption (i.e. getting as many people as Apple possibly can to think about renting a movie or *please please* a TV show through Apple ).
    So I guess I feel like it's a lose-lose for Apple and me. Through Apple, to rent a movie (or *please please* a TV show) I will pay much more than I would with Netflix. But if Apple can walk away with an untarnished reputation after creating a special headphone input into their original iPhone device to make extra money out of nothing, then maybe they can do no wrong and we just need to keep blindly giving them our moolah? Can somebody please let me know how I could get a better job or at least a raise so that I can give Apple all of the money they are trying to squeeze out of me?
    p.s.s.s.s. I am soooo sorry Apple, but the other day when I was at your store looking for the Firewire adaptor I needed to transfer files from my Firewire 400 on my old iMac to my new iMac via the Firewire 800 adaptor, I just couldn’t stomach the huge markup. I imagine you guys make a ton of money by ridiculously marking up your accessories over what one could pay elsewhere.
    I know the rest of your consumers are happy to pay $50 for buying the cable in your store and I would like to apologize right now for using your in-store computers to search for the alternative pricing which I found for $19.99. I don’t believe any of your other customers saw me doing this, but if they did, please accept my sincere apologies. In the current economic environment, reputation is everything and it would be unfortunate for all of us if the Apple masses felt they were being taken advantage of.
    Wow, I think I’ve got some issues with Apple that I need to work out. Anyone know a good therapist?

  • Apple TV won't connect to iTunes and does not show up in my devices list in iTunes.

    My older model Apple TV won't connect to iTunes and does not show up in my devices list in iTunes.  I have two Apple TVs in my house and I can't imagine that this is part of the problem but I mention it just in case.  My other Apple TV is brand new and it connects to iTunes just fine.  I've tried most of the "fixes" and one says to Force Sync but I can't since Apple TV isn't in my device list.  Another "Fix" said to Navigate the Apple TV to Settings --> Downloads --> Check for Downloads, but when I tried that there was no option for "Downloads" under the Settings Heading.  I'm at a loss.  Please help.  Could this be an issue with too many authorized devices?  We have three iPads, two iPhones, laptop, desktop, two Apple TVs, and an iPod and most of them are syncing the same music playlists and whatnot...  have I run out of rope?

    hi, just posting to everyone in general..its not you, or your apple tv, it is itunes.
    ok, ive had the exact same issues for weeks now, as with everyone i had done the lastest upgrade and no longer could see/sync my gen 1 appleTV.........so, i removed the upgrade and went back to the prev version, even though it was showing in my prefs under appleTV, it still wouldnt show in the side panel under devices....i gave up.
    This week i was determined to get it to work!  So i started from scratch, totally removed itunes and started back with version 9 and upgrade each version from there, i had no luck, ic clicked find appleTvs but it wouldnt....however i just d/l version 9.2.0.61 and BINGO!. No sooner has it opened and up popped the side panel devices list, showing my appleTV..all ready to be synced etc. I immediately panicked of course haha..and set it all up and its working perfectly.
    ...Only catch now is that this older version will not be compatiable with my iphone, which i do keep music on...seems we cant win. grrrrrrrrrrrrrrrr   this will be the same for all the latest apple products.
    Apple needs to allow more than one version of itunes per pc OR perhaps they could get their act together and include all of the millions of APPLETV GEN1  owners in there latest upgrading..after all, THEY made the product and THEY do sell the movies/tv shows, perhaps they could stop making all the upgrade all about the music only!......on which i might add why not incluse movies/tv shows in icloud! yet another upgrade that should be included in the APPLETV  GERNERATION 1!..yes we do  still exist!
    at the very least, im happy ive managed to get all my movies etc onto the apple tv, where ill keep them and from now on d/l directly onto my apple tv. I usually d/l to my laptop and then send them to the appletv but while trying to get all this sorted i did a test, i d/l a movie  using my appletv hoping it would somehow let itunes "find" it and getting it to show up in my device list, but it didnt work,  however it did sync/send the movie to itunes..  so at least i could save a back up copy.
    good luck trying, as i said this has been weeks and this is the only solution ive found so far....and going through these forums its obviouse its itunes thats the issue, NOT Our apple tvs.

  • Does anyone know how to get the ATV1 to appear in device list in iTunes?

    I have been trying for hours to get my Apple TV to appear in the device list in iTunes. Every time iTunes updates I lose the connection, however, this time it will not reconnect. I have read through many of the questions/responses and tried almost all of them but nothing has worked. The Apple TV is connected to the network and can access the iTunes store without issue.
    I just purchased $300 in iTunes cards so that I could download my duaghters favorite shows and now I have no way of playing them on my TV. I have a PC running Windows Vista, if that matters.
    I would appreciate any help/advice that can be offered.

    go to the settings menu on the appletv
    unpair chain with the computer
    let it do it's unparing stuff
    repair with the computer
    type in the code on the computer
    let it sync as it see fit

  • IPad does not appear in devices list on itunes

    When I connect iPad to laptop it does not appear in the iTunes devices list. I have tried all the recommended Apple support actions reinstalling iTunes etc but nothing seems to work. Any suggestions?

    Thanks for your tip. It didn't work in quite the way you outlined but it did help me to get my IPad recognised by ITunes. When I did what you suggested ITunes came back with something like ' can't connect to your IPad because the driver is missing, delete and reinstall ITunes to resolve this problem' . When I did that the IPad appeared in the Devices list.
    I assume from this that the device driver was defective. Many thanks.

  • Where is the "Devices" list in iTunes???

    I must be blind - but I can't find the Devices list, let alone: "Select the Apple TV icon with “Click to set up” next to it in the Devices list."
    I have iTunes 7.1.1 (5) - have downloaded and REinstalled it twice, restared computer multiple times, etc.
    TV find my network, plays movie trailers, etc. but I can't set up iTunes to sync (and, yes, in preferences "Look for Apple TV's" is checked).
    Help!

    I had the same problems with mine--ATV was able to play trailers without a problem, and the Airport Extreme I was using was definitely recognizing the ATV (the MAC address showed up in the connected users list).
    I was able to get the ATV to show up in the devices list (which indeed only appears if there's an ATV or iPod connected) when I disabled my firewall. There are some Apple support articles that show specifics and step-by-step processes for doing these, which I can post later if you can't find them.
    Here's the kicker--Apple's built-in firewall protection can be completely shut off, but some Windows and third-party Apple firewalls can't be. I don't know about Windows, but if you use NetBarrier for Mac (even the most current release), you will have to completely uninstall the program using the NetBarrier installer. Even set with "no restrictions", the ATV uses so many atypical ports and connections that NetBarrier gets in the way. I am sure this would be true for other firewalls as well.
    Once you can get the ATV to show up again, then go through the tech articles to see how to configure your firewall for the ports needed to allow ATV to keep functioning with the firewall on.
    PowerBook G4   Mac OS X (10.4.9)  

  • HELP (Apple TV not showing up in Devices list)

    Has anyone resolved this issues. Like many others, i have things set up perfectly. My itunes stream, but when I go back to sync photos,etc. there is no Apple TV in the "Devices" list (as there is no devices list).
    HEEEEEEELP

    AppleTV does not show up in my Devices list unless there is a code on the screen of the AppleTV. It's not the way I understand it's supposed to work, and apparently not the way everyone's works, but it's a reasonable workaround for me. I think this is a bug in the software that's interacting with something else on my network or a QC problem with some hardware component, because it doesn't happen to every AppleTV.

  • ATV not showing in the iTunes device list? Check your HTTP proxy config

    Seems like many people are having trouble getting their ATV to show up in the iTunes Devices list. Here's my situation, and the root cause:
    1. I have a small network at home consisting of one LAN with a number of computers, and a gateway router that provides DHCP, DNS and HTTP (web) proxy services
    2. I found that my ATV would display in the Devices list only when the ATV and at least one Mac were isolated from the rest of my network; when I connected them back to the rest of the LAN the ATV disappeared from the Devices list (in the simplest case this isolation was a crossover cable between the Mac and ATV)
    3. when connected to the whole LAN, the ATV could successfully contact the iTunes Store (trailers, etc) but would not show up in the Devices list
    4. I could ping the ATV from the Mac running iTunes every time (i.e. I did not have a basic connectivity problem; e.g. "ping appletv.local." always worked)
    5. I started with my ATV on v1.1, when I upgraded to 2.0 and turned on the the iTunes' "Look for remote speakers connected with AirTunes" option ATV always appeared in the speaker list (i.e. even when it wasn't in the Devices list)
    I had gone through the Apple troubleshooting guides, with no change.
    After a lot of elimination I discovered that my problem was with my web proxy settings: my Macs were configured to use my gateway router for HTTP, and it seems that iTunes connects back to the Apple TV via HTTP - these requests were sent to the proxy and rejected (as they were for an address on the inside LAN; this is the way my proxy was configured).
    I fixed the problem by using a PAC file specifying my LAN as "DIRECT" (e.g. below). An alternative would have been to configure my proxy to allow connections from the LAN back into the LAN (but be careful about allowing access from elsewhere, e.g. the Internet).
    Here's my PAC file: my LAN is in the 10.0.0.0/8 address space, domain *.home.lan. (iTunes seems to contact the AppleTV via it's IP address, e.g. http://10.0.0.169:3689/ript/fp-setup?fairPlayID=4a5...):
    function FindProxyForURL(url, host)
    // simple hostname
    if (dnsDomainLevels(host) == 0) {return "DIRECT";}
    // match Host against local domains (w/ optional :port)
    var dom = /(127\.\d.d+.d+|.local.?|10.d+.d+.d+|.home.lan.?)(:d)?/;
    if(dom.test(host)) { return "DIRECT"; }
    // All other requests go through port 8080 of proxy
    // should that fail to respond, go directly to the WWW:
    return "PROXY proxy.home.lan:8080; DIRECT";
    The reason the ATV was successfully appearing in the Devices list when it and a Mac were isolated from the rest of the LAN was that the Mac was unable to reach the proxy, and falling back to the 'DIRECT' connection.
    Note: if you don't have basic connectivity, e.g. if ping appletv.local. doesn't work, then the above is almost certainly not your problem.
    Ben
    Message was edited by: af3556

    Hi There,
    I have the exact same issue going on that this person described in this thread, but with the EXCEPTION in my case being that, after I have plugged my device into my laptop and uplugged it (about 10 consecutive times), my iTunes FINALLY recognizes my iPod Touch.
    This is extremely frustrating to have to go through this scenerio each and every single time I want to synch and charge my Touch. Is there any way to correct it, so that the device would be recognized immediately when I first plug it in? It used to work this way (prior to the v.10 update, most likely).
    Thanks!

  • Apple TV didn't show in device list  (and how I got it back.)

    Hi all,
    I just went through a lot of work trying to figure out why itunes stopped showing my appletv in the device list and wanted to post this information in case someone else has this happen. Initially I thought it was iTunes 9 (which I ruled out because one of my old PCs still had itunes 7 or 8), but what it ended up being that when I installed Snow Leopard I did a fresh install, which erased the library the appletv was sync'd with. Basically, the appletv could not find the library it was previously associated with (why it stopped showing up in the device list for multiple computers I'm not sure.)
    The solution was to go to "Computers" under settings, and disconnect from the computer the appletv was previously syncing with (note, this does clean off the appletv, but all your settings are retained) and add it anew. (Once you get to the screen where it gives you your five digit code it should show up in the device list again.)
    So if you're seeing the behavior, you might want to try this. Hopefully this will save someone else some time.
    Justin

    the options for sycning are not under the icon they should be in the panel to the right of the screen in many tabs that contain the sync options for each media type (Movies, Music, Podcasts etc.) i.e. when you click on the appleTV icon, tabs should appear to the right (where all your movies etc in iTunes would normally appear).
    there are two options when you go into computers on the appleTV.. the one on the top i think it link to itunes library (this is the one you want as this will make it a syncing library).. the option just below this is "share iTune library" or something like that will result in that library streaming only... so hence it will not have any syncing options..since it's streaming only.
    once you press the link to... get the code, enter into iTunes.. choose custom sync in the summary tab.. uncheck show only synced items on appleTV (this will allow you the library to sync and stream... item not synced will be displayed on the appleTV and will be streamed when clicked on.. as long as iTunes is open and computer on).. the tabs i mentioned above will appear on the right hand panel on the iTunes window and in each tab you set the options for sync for that particular type of media.

  • Cannot see Device List under iTunes when my Nano is connected. Can only see the Eject for the Nano. Help

    My iPod Nano is connected to the PC since I can see the Eject icon in the Top RHS of the window.
    Apple support tells me I should be able to see the Nano under Devices - I can neither see 'Devices' nor the Nano
    The is extremely fraustrating as I just want to dump a few podcasts to the nano and get on with life ...
    Where is the Devices list mentioned in the Help - all I see is music I've uploaded and tabs for the Store and Podcasts etc.
    Thgis is my second evening I've tried to get this going - I've re-installed iTunes, reset the nano (7th Generation), taken out all other USB peripherals apart from keyboard and mouse, restarted the PC.
    Many thanks in Advance

    Never Lost at Sea,
         If you have a menu bar with buttons for file, edit, view, controls, etc., click on view and choose "show sidebar".  I was looking for the same thing until a couple of days ago when, working with an Apple tech on an unrelated song issue, he told me how to display that sidebar with the devices display.  I had to click on the little symbol, upper left corner, choose "show menu bar", which wasn't displayed up to then, and then what I just told you.  Hope that is what you're after.

Maybe you are looking for

  • Function module to convert date and time

    Hi , Requirment is i want to create a file in the application server.So the file name should be in the following format. 0XX-XXXX-YYYYMMDDHH.format. in this HH-hours.I need to take current date and time.so is there any function module to convert into

  • Getting BEA-000337 error in a TEST environment with no load at all.

    Hi, We're currently experiencing an unknown issue regarding the key BEA-000337. We've looked on the internet to understand what happens, but we are completely stuck. <Jan 30, 2009 3:23:29 PM CET> <Error> <WebLogicServer> <BEA-000337> <[STUCK] Execute

  • EJB handle containing t3://null:7001

    I'm working on a cluster, using in-memory replication, on SunOs 5.6 (WLS           5.01 sp1).           I've 102 stateless session bean, and only 1 stateful.           The stateful has in weblogic-ejb-home.xml the following:           <weblogic-ejb-j

  • Multiple Transaction Calling in BDC

    Hi Friends, The Requirement is related to MI01,MI04,MI07 BDC is required for these transactions with in a single program is it possible through CALL-TRANSACTION mothod or we have to go for the SESSION method please suggest in that way to resolve the

  • Help - option premium calculator configuration and testing

    Hi Experts, I've been reading up on Option premium calculator in saphelp.com but it doesn't give me pre-requisites that are to be maintained first before TXAK can be used perfectly. Would like to request for assistance in 1) customizing/configuring a