Ea3500 linksys smart wifi reboots every 5 secs

can not connect my ea3500 (v1.1.39....) with linksys smart wifi from iphone 5s iOS 7.1.2 it reboots every 2-5 secs endlessly
also can not connect it from the web via latest firefox and IE after input in my login and password the circle spins endlessly
reboot doesnt help, only restore
tired of restoring it
does anyone have this problem? maybe new sw is needed?

Ok so the router is ok but the app on your iphone reboots? Have you done a full power off on your phone lately? If that doesnt work try a reboot on your iphone. 
Begin by holding the sleep/wake button at the top right of the device and the Home button at the bottom center of the face at the same time.
Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power-off slider appears. If it appears, just keep holding it
Wait until the silver Apple logo appears.
When this happens, you can let go - the iPhone is rebooting

Similar Messages

  • Linksys smart Wifi error while deleting offline device from device list

    i have Cisco Ea4500 with linksys smart wifi, each time i try delete offline device i get error message.
    anyone can help?

    What browser did you use in deleting offline devices? Are you doing it under the Device list? If yes, normally it should be deleted because those are widgets only. Can you try your other browsers? And do it on the main computer.

  • Linksys Smart WiFi doesn't support IE11

    Has anyone had trouble accessing Linksys Smart WiFi with IE11. I keep getting browser not supported and it won't let me in. I can't even get in using the routers IP settings.

    This was my fix! I downloaded Mozilla FireFox, installed and it worked great with Smart WiFi. I then tried IE11 again and guess what? It worked like a charm and is still working. Go Figure!

  • Port used for Linksys Smart Wifi

    Good day,
    Please i would like to find out the port used for Linksys Smart Wifi Login via the Internet. I have blocked alot of ports on my router and i am not able to login via the Internet again.

    Blocking unknown isn't normally required because the router firewall does that normally. Blocking specific port is good but you need to know what they are used for. UPnP devices will open ports as needed if you have UPnP enabled on the router.
    Sorry I don't know the specific ports or process remote access uses. I sure it's a dial out feature and not a dial in.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Unable to get Linksys smart wifi to work...I NEED HELP!

    I am unable to benefit from the additional tools from Smart Wifi for EA3500. I have the the account, the password, but when I login it says you need to associate your router with your system...I've tried myrouter.local, linksyssmartwifi, enter the password and still i get your need to associate your router with your account.  NOT sure what I am doing but all I know is after 8+months of trying various things to get this to work I about to remove it and go back to just a standard router without wireless account garbage that everyone seems to have trouble connecting. My system is fairly new Lenovo only had it maybe 5 months using windows 8.1.  Any help will be most appreciated!  Please give step by step instructions, please don't assume I know computers/routers/networking because if i did i wouldn't have these problems... :-)  Pretend I am 10yrs and you have to be specific and detailed about what,where,how,etc., regarding getting smart wifi tools to work.... No offense to 10 year olds...

    Homegrown619 wrote:
    I am unable to benefit from the additional tools from Smart Wifi for EA3500. I have the the account, the password, but when I login it says you need to associate your router with your system...I've tried myrouter.local, linksyssmartwifi, enter the password and still i get your need to associate your router with your account.  NOT sure what I am doing but all I know is after 8+months of trying various things to get this to work I about to remove it and go back to just a standard router without wireless account garbage that everyone seems to have trouble connecting. My system is fairly new Lenovo only had it maybe 5 months using windows 8.1.  Any help will be most appreciated!  Please give step by step instructions, please don't assume I know computers/routers/networking because if i did i wouldn't have these problems... :-)  Pretend I am 10yrs and you have to be specific and detailed about what,where,how,etc., regarding getting smart wifi tools to work.... No offense to 10 year olds...
    Any progress on this? 

  • EA6900 Can't connect to Router error message from Linksys Smart Wifi

    Hello Everyone, I am having an issue where I cannot remotely access my router. I currently have Charter as my ISP and have internet connectivity when at home. I can also access my router through Smart Wifi when on my local connection. When I try to access remotely I get the "Can't connect to the router" error message. I believe that I have enable the correct settings on my router to provide this service. Any thoughts would be greatly appreciated! Thanks in advance. Mike Carlin

    Thanks for the reply. ISP: Charter CableModem: Wish I could tell you at this point, but not at home and can't remember specifics. I thought that I did the association.  Is this what you are talking about?http://www.linksys.com/us/support-article?articleNum=140177   

  • EA4500 - Linksys Smart WiFi Guest Features?

    I've just bought my Linksys Smart Router yesterday and enjoyed configuring it last night. I have a question about the welcome page for the Guest or Visitor network. Is it possible to customize the message of the welcome and secure page provided for the guest account when they open the web browser? It is as if I'd like to be able to warn the guest that he/she is being connected to the Guest network of the JESUS FAMILY etc... Thank you for your assistance.

    I don’t think that is possible with this router. It is not possible to customize that Guest Welcome page. I’ve been searching for ways on how to do it but so far not being successful . Anyways, there might be software we can download that can setup a guest network with customized welcome screen. I am going that route now. I am still searching for it. I will post any updates about it. Good luck to me .

  • Linksys smart wifi app

    Love the app, and all is working great on iPhone 5S jailbroken...
    Just wanted to drop my opinion on an option to add to the app..
    On the external storage wiget could you plZ add the option there to safely remove USB I hate to have to boot up a laptop just to remove my USB stick/hard drive... It would b much more convenient to do it from the iPhone app..
    Just my 2 cents thanks!!!

    I recommend letting Linksys know about this directly:[email protected]

  • Linksys Smart Wifi - Not as many useful features as the Original Interface

    The user interface requires more work. It doesn't seem to have many of the useful features that were standard in the original interface. Is there any chance of us being able to choose to go back to the original version?

    I just purchased the EA6500.  A sleek looking unit that I would sell in a heartbeat.  I had finally become quite happy with my E4200.  Well to be more precise, I was happy with the interface. The interface for the EA6500 is frustrating.  Why can’t I roll it back to the original and classic version?
    Why not add a few basic refinements to keep me (and many others I am sure) happy.
    1.            The DHCP Current Clients. 
    -              MAC ID info would be nice
    -              Not up to dated instantly if at all
    -              Some devices/clients show up while others do not or never show up
    -              Why can’t we easily copy text as before?
    2.            Router resets and temporarily disconnects ALL clients when you:-
    -              Add, move or change a DHCP reserved  client
    -              MAC Filter ID added, moved or changed
    3.            MAC Filter – Lack of info
    -              Why not show associated device information for all filtered
    -              Why not show currently connected devices and info such as IP and device name
    -              Why reset with changes
    4.            Customer support used to be available by phone. Now to cut costs, we have been reduced to communicating through a chat-window. 
    During a recent firmware upgrade, a power outage put my E4200 out of commission and reduced it from an essential part of my household, to a paper weight with a flashing light.  Online support with very little investigation told me to go out and buy a new router because  there is nothing they can do to fix it.  The E4200 is dead.
    I didn’t throw out the E4200, but I did purchase the EA6500.  I did so mainly because of my mostly positive experience with Linksys/Cisco products and customer service. I am beginning to see a change in future assessments.
    At $200 (CAN), my new EA6500 is easily the most expensive router I have EVER owned.  You’d think I’d be able to speak to customer support reps on the phone if I had a problem. Instead we get this online chat-window which is not customer-service oriented at all.
    -              There are no audible cues, so you dare not leave the PC
    -              Sit there until you see text in the Chat Window….. Cisco!....That’s PATHETIC
    And then while looking for a cisco place to vent, I had to go to Facebook.  Are you serious Cisco?
    Can you see why I might consider taking a second look at Dlink?
    Sincerely
    A disappointed, under-whelmed and potential ex-cisco customer.

  • Linksys Smart Wifi now supports Mac OS 10.8 Mountain Lion

    You can download the software here.
    http://homesupport.cisco.com/en-us/support/ccc
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

    Make sure your Mac qualifies to run Mountain Lion >  Apple - Upgrade your Mac to OS X Mountain Lion.
    Disable anti virus software then try resuming the download.
    Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading including Mountain Lion.
    Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

  • Linksys Smart-Wifi Outage [SOLVED]

    We are fully aware of the outage on our cloud service (https://linksyssmartwifi.com/ui/1.0.0.159216/dynamic/login.html). Our team is working round the clock to have this fixed as soon as possible. We have no information yet on the cause but we will update this thread as we get more information.
    Please bear with us and we apologize for the inconvenience.
    Thank you.
    EDIT: This issue has been resolved.

    Nevermind - got it fixed.

  • Linksys EA3500 Smart Wifi random disconnects

    I have been experiencing this issue for quite some time now.
    Ever since ive upgraded the firmware to the smart wifi one
    every device connected to my router (ipad, laptop by lan cable etc)
    randomly gets disconnected and then reconnects after 2-3 mins
    Its frustrating to keep experiencing this and i cant find a solid solution online
    If this still persists, im considering downgrading the firmware to the old one
    looking for experts asap.
    Thanks in advance

    Was a Factory Reset performed before and after any firmware updates then set up from scratch?
    Internet Service Provider and Modem Configurations
    What ISP Service do you have? Cable or DSL?
    What ISP Modem Mfr. and model # do you have?
    Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
    What ISP Modem service link speeds UP and Down do you have?
    Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
    Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
    What wireless modes are you using?
    2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
    Channel Width set for Auto 20/40Mhz or try 20Mhz only.
    Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
    What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
    Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
    Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
    WMM Support must be enabled for single wireless N mode to function.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
    Router Placement
    Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
    3-6' feet minimum safe distance between devices.
    Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
    http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-esse...

  • Linksys Smart Wi-Fi Firmware Upgrade: "Media prioritization Error"

    Router: Linksys EA3500 Dual-Band
    Looking for help concerning my most recent upgrade which was, cisco connect to linksys smart wifi. Keep getting same error code..

    Duplicate post #4.

  • EA2700 Smart WiFi Unable to Connect

    I can't connect My EA2700 router through the Smart Wifi Utility.
    When I first turned on the router I utilized the the CD it came with and tried to set it up. Although I was in range of the router and I can see it in My wireless list, I couldn't configure it.
    I came of the utility and using the windows 7 prompts I was able to change the SSID and I received a generic password.
    I was able to connect My laptop to the router with this password and access the internet.
    When went to configure it through the Smart Wifi utility using the same password I can't access it. My laptop is connected but I can't access the router in the utillity.
    I directly connected My laptop to the router using a cat5 straight cable from My laptops Ethernet port to the router's port #1 and tried the smart wifi utillity again. Still I can't connect.
    I tried using the IP 192.168.1.1 in the browser Still can connect.
    I tried using the CCC website Still nothing.
    The prompt keeps saying invalid password, mind you at the moment I have already connected 3 more devices with the generic password.
    Any advice will be greatly appreciated.
    Solved!
    Go to Solution.

    Have your tried using "admin" instead? You did not exactly configure the router using the Cisco Connect setup wizard so the router's password is not the same as your wireless network's password. Log-in to http://192.168.1.1 or http://myrouter.local and use "admin" for password. If you have upgraded the router's firmware during setup, you may also go to http://linksyssmartwifi.com. Here, you can choose to access the page locally (use "admin" for password still) or create a Linksys Smart Wifi account for cloud- based access.

  • EA6900 After Creating the Smart WiFi Account, I get a "No Associated Networks" message

    Well, I got my new EA6900 router and set it up following the Quick Start Guide, using my laptop directly connected to the router via an Ethernet cable.
    After creating my new Smart WiFi Account and getting the router running, I took my laptop back to my desk, and connected via WiFi, using my new SSID and Wireless password. Then I checked the speed, and replied to the email to Verify my new Smart WiFi account.
    Then I used the linksyssmartwifi.com URL to log back on to the router using my new Smart WiFi Userid and Password.
    However -  I got the message "No associated networks. The Linksys Smart WiFi account specified does not have associated networks".  Huh - what does that mean?
    Fortunately I could still logon by just using the Router Password, but why didn't this new Smart WiFi account work? And where do I setup the "Associated Networks"?
    If you are getting this same "No Associated Networks" error message, then here is the answer:
    ***  You MUST remain cabled to the router via Ethernet for your INITIAL logon to your new Smart WiFi account. ***
    This will cause the all-important "Associate Router" panel to appear, where you enter the Router Password to "associate" its network with your Smart WiFi Account.   Was that little tidbit mentioned in the Quick Start Guide?  Nooooooooo!!
    Of course, then you can go searching for answers like I did, and perhaps even find the knowledge base article "Creating a Linksys Smart Wi-Fi Account". And if you work your way down thru it, all the way to Step 4, you'll see the "Associate Router" panel that didn't appear when you tried to do your first logon using a wireless connection.  An easy mistake to make.
    And if you look very carefully at the fine print of Step 4, you'll see at the end of the so-called "Quick Tips" this little tip:
    "Associating your account remotely is not possible."
    Well Thanks, Cisco! By hiding that little tidbit so well - it was like an Easter Egg hunt, trying to figure out what "No Associated Networks" really meant. Please fix the Quick Start Guide to include a Step 6 with this very necessary "Association" step in it.

    Hi Geekychix,
    No, I successfully associated - once I recabled my laptop to the router, and then signed on via the browser.
    I suspect that many of you have a computer PERMANENTLY cabled to the router, so of course you can't understand this fundamental problem of the 'Associate Router' panel not appearing at logon, when you try to logon via a WiFi connection.
    Maybe I should explain that the location of the router in a large house is crucial for good WiFI coverage.
    Because of this, the router location may not be an ideal spot to keep a computer permanently cabled to the router.
    In my case, it's quite inconvenient, which is why I made the effort to explain WHY I disconnected my cable, and logged on remotely via the WiFi connection, to complete the email validation, and make my initial logon to the account.
    As I said before, it's an easy mistake to make - but there is No Clue that you need to remain cabled for the all-important 'Associate Router' step at first logon, which isn't even mentioned in the Quick Start Guide.

Maybe you are looking for

  • Java Web Start- Cannot launch Application. Pls help

    HI Ia m beginner in java web start. I creaate a simple swing application and try to launch it through web start. But I failed. My application jar file (sample.jar)contains only class files. No menifest file. Then I sign my "sample.jar" file and place

  • Pin images in Full Screen Slideshow???

    I am using a full screen slideshow in Muse and it appears that all the images are proportionately resized with fill frame and pinned in the center. This means that if some of my images of people don't have the same general layout, some photos have he

  • Powerbook G4 video problem

    Hi there i have a costumer´s Powerbook G4 with this problem The issue is on the mainboard, flex, LCD, video card? Regards

  • "No Objects Found" in PPOME

    In tcode PPOME (Organization and Staffing Change) the user cannot view any objects. The prompt "No Objects Found" is shown. Active plan is set and the correct roles are assigned. Points to those who can help. Thanks Regards, Olekan Babatonde

  • Hi the home key is not working in my new ipad2

    Hi the home key is not working in my new ipad2