EA3500, not able to access Cicso Cloud Connect

I've gone over this a couple times and I just can't seem to figure it out.
I just purchased an EA3500 because I absolutely need guest access. I set everything up through the Cisco Connect application on the CD and all was well. 
I figured it's time to get into the whole cloud connect app thing, as this is why I chose this router over another but after creating the account and activating through email, I constantly get the message that I need to associate my router with my account.
The PC I am using is directly connected to the router through a cable. I'm not sure what else I am to do at this point. The content of the entire message basically is telling me to head to ciscocloudconnect.com with the PC connected to the router that I want associated and to follow the directions. 
1. There are no directions... I get that message every time.
2. I've tried rebooting the router and then logging in to the website - that gives me a message saying there's no router detected, meaning that somehow the site IS detecting the router, I just somehow haven't associated it.
But as I mentioned, I don't see any manual steps to do so.
I could be missing something, so I just need a little help. I have changed my router ip from the defaul 192 to something else, so maybe that could be it? I have also changed the wifi from wps to manual. Those are really the only 2 things ive done that I could even think of affecting the cloud stuff.
Any help would be appreciated. If I don't have this resolved by tomorrow evening I am going to just return it and get something else.
Thanks in advance.

Update:
Fixed.
The online firmware check reported no new firmware. Went to the EA3500 downloads section and saw new firmware enabling the CCC. Flashed that and all is well now.

Similar Messages

  • Not able to access certain websites: "connection refused"

    This is a repost of:
    http://discussions.apple.com/thread.jspa?threadID=2035299&tstart=0
    I thought I had been able to resolve the problem, but it turns out that I haven't.
    When I try to load certain websites on my MacBook Pro I get a page load error. In Firefox this error states that "The connection was refused when attempting to contact www.whatever.com"; in Safari, "Safari can’t open the page “http://www.whatever.com/” because Safari can’t connect to the server “www.whatever.com”.
    This is specific to my MacBook Pro. If I use my girlfriend's Macbook or my iPhone on the same network to access the same sites, the sites load as usual.
    Also, if I perform a Safe Boot on my MacBook Pro I am able to access the sites.
    Any tips on how I can resolve this?

    Since you can connect with a Safe Boot, you'll have to resolve the conflict within the original account when 3rd-party stuff's running. Create a new admin user account, log into it, and see if the problem persists. Report back.

  • I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

    I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

    varunsharmaapplefan
    http://support.apple.com/kb/ht5209 might help you.  An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror.  If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music.  You should have no problem playing your iTunes over airplay though.
    This may also help http://support.apple.com/kb/HT4437
    Regards
    Jules 

  • I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • HT1695 My Wifi is connected however im not able to access internet nor email any help

    My Wifi is connected however im not able to access internet nor email any help

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • HT5569 how can i surf in my iphone 4s, even after connecting to wifi also i am not able to access net?

    how can i surf in my iphone 4s, even after connecting to wifi also i am not able to access net?

    i dont knw hw do u cal dis type of connection, dis s university wifi , am under dat using , here the thing s if somone want to connect wifi means they just hav to put proxy. i hav given evrything it also connected wel. i can c wifi signal fan in status bar.
    Thousands of users from all over the world read these forums hoping to find English, their second third or fourth language.  They make an effort to communicate in English. Try to join them.

  • I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

    I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

    SMS. Deggie, had them check that.  After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID.  Not impressed. I put what I've learned here in a simliar thread
    https://discussions.apple.com/message/17416082#17416082
    and this is what I've put in apple.com/feedback
    "iMessage requires internet.  SMS does not.  iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime  server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
    This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need."

  • HT204053 hi there. my phone was stolen and i have heaps of notes that i need to access, but i'm not able to access my notes via the cloud, any tips on how to do this? thanks

    hi there. my phone was stolen and i have heaps of notes that i need to access, but i'm not able to access my notes via the cloud, any tips on how to do this? thanks

    i'm not able to access my notes via the cloud
    If your notes sync with your icloud account, you can access them at www.icloud.com

  • Not able to access DB on VM after getting Reserved IP

    Hi,
    I have Reserved an Public Virtual IP for my VM 23.102.xxx.xxx  The OS WIN server 2012 R2 and and has SQL server 2012 running on it.
    Problem:
    1. I'm not able to access the DB or connect to the server form outside( from my local machine). I was able to connect when the Public Virtual IP wasn't reserved.
    2. As my website is hosted on the same VM, I use the Internal IP address as the Binding IP address, however I recently noticed that the Internal IP address has changed and my website was down.
    3. How do I prevent the Internal IP address from changing. So that I don't have to reset my webconfig and binding IP address frequently?

    Hi,
    Thanks for your question.
    1. How did you connect to the VM? I recommend you to use DNS name of the cloud service(xxx.cloudapp.net) with the public port for RDP to connect to see if the issue persists.
    2. In general, if you shut down an Azure VM to stopped (deallocated) status, the resources for the VM will be released and the internal IP address may be changed.
    3. You can assign a static internal IP address to an existing VM if it is in a virtual network. For more detailed information, please refer to the link below:
    Configure a Static Internal IP Address for a VM
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Why am i not able to install creative cloud?

    Why am i not able to install creative cloud? i paid for the package,  downloaded the installer now its been trying to connect to the server since a day..

    You can check these :
    Creative Cloud Connection Update
    Sign in, activation, or connection errors | CS5.5 and later
    CreativeCloud Manager can't connect to Internet
    Regards
    Rajshree

  • I'm not able to access to the internet with my ipod ..help! Non riesco a connettermi su internet via wi-fi !

    Salve, ho appena comprato il mio ipod di 8G..  connettendomi wi-fi al router di casa mia, aprendo safari (o le altre applicazioni che richiedono la connessione internet) spunta la finestra con scritto "Impossibile aprire pagine, Safari non può aprire la pagina perché non è connesso a Internet" Ho provato e riprovato, ma niente! Spero possiate aiutarmi, grazie! :)
    Hello, I've just bought my ipod (8Gb)... even with the wi-fi I'm not able to access to the internet, opening any app that needs internet my ipod shows this " Cannot open page, Safari cannot open the page because it is not connected to the internet"  I tried and I tried but it was useless..! I hope You can help me! Thank you and sorry if my english isn't right

    I can connect to the site using another computer on my network. It's completely isolated to my iMac.

  • BO 4.1 LCM not able to access through Web Browser

    Hello Folks,
    I installed BO 4.1 in my Vmware workstation 10. successfully. its working fine all tools and web based tools like CMC and BI launch pad.
    I have problem while connecting to LCM through below link.
    localhost:8080/BOE/LCM
    Once i get hit this link on google crome browser I'm getting below error. Please anyone suggest me how to access LCM in my local server.
    404 Missing Page
    The page you requested is not available on this web server for one of the following reasons:
    The address you typed may be inaccurate. For example, a character was missing. To correct this issue, double-check the address and make sure that it is spelled correctly.
    If you clicked on a link or button, the web application that generates this link may be experiencing a temporary problem. Close and restart your browser and try the link again at a later time.
    After verifying that the error is not the result of a bad address or web application problem, perhaps the page you tried to access may no long exist or can not be generated. Report this problem to the webmaster or the administrator.If you are the webmaster or the administrator of this web server, refer to the SAP BusinessObjects FAQ page regarding HTTP errors for more suggestions.
    If the problem still persists, please:
    Search the SAP BusinessObjects Knowledge Base Articles for similar cases.
    Contact with SAP BusinessObjects Customer Support.
    Thanks
    venkat

    Hello Jawahar,
    Thanks for your reply.
    Your right from 4.0 its a Promotion Management activity with LCM.
    Here my question is I'm not able to Access LCM thorogh Localhost:8080/BOE/LCM.
    Please anyone help me how to do rectify this.
    Thanks
    venkat

  • Not able to access the result set from one member function to another

    Im new to jdbc
    I have declared a connection object , a result set object and statement object in one member function and i am not able to access these in another member function. But both are in the same class
    Kindly help
    Thanks
    Shasi

    Kindly refrain from double-posting:
    http://forum.java.sun.com/thread.jspa?threadID=700659&tstart=0
    - Saish

  • Not able to access the multi-source universe in WebI

    Hi
    I am not able to access the multi-source universe in WebI, getting below error message.
    [Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
    And also Not able to perform anything to designing multi-source universe in business Layer.
    Universe back-end is
    Oracle 11g and
    SQL2008 DB
    Version IDT: 4.1 Support Pack 2
    SAP BusinessObjects BI Platform 4.1 Support Pack 2,

    Hi Sreeni,
    You can create a new APS in CMC containing the Data Federation Service with
    -Xmx2g -> 8g (This is the suggested range)
    Make sure you remove this service from the existing APS and then create a new one.
    You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
    Server (APS) which would assist you in sizing the APS.
    Regards,
    Manpreet

  • I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

    I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

    Hello sweetracy,
    The following article can help restore and stabilize your cellular data connection.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Cheers,
    Allen

Maybe you are looking for

  • How to use back to my mac from iOS?

    I have enabled back to my mac on my macbook running ML and have enabled the same for my user ID in the airport express router to which the macbook pro is connected. i would like t know how i can access the shared folder from my ios devices while with

  • Windows Printing to a Epson Printer on an eMac.

    I have a Windows XP computer that I am trying to get to print to an Epson printer that is connected over the network on an eMac computer. My other Mac computers can print to the eMac printer just fine, but when I try to add the printer to a Windows X

  • Illustrator not opening: I've installed Suitcase Fusion 5 on to MAC running osx 10.6.8

    After this install Adobe Illustrator no longer opens up. I've used the CC Cleaner Tool to uninstall illustrator. Moved Fonts into one library, checked they're all ok. Started up the app without any plugins. Created a new users on the Mac and the appl

  • Add optional import parameter to an EXISTING Z function module.

    Hi Guys, I want to add an OPTIONAL IMPORT parameter. What are the things I need to take care to change and activate the FM, so that the changes does not effect the other programs calling this Z function module. Thanks,

  • Creating Hyperlinks that open a new window

    Hi, I'm creating a website for an art group I belong to. On the member's gallery page  - here - I have each artists name and a link to a website if they have one. I would like the link to open the site in a new window rather than directing the visito