EA3500 Smart Wi Fi - How to disable IPV6 to address Parental Control Issue

Hi
I've been reading that parental controls does not work with IPV6.
I would like to disable IPV6.
How would I do that?
P.S.: I noticed responses for EA4500 that there is a check box to disable the IPV6. Very straight forward but my interface
does not have the same layout of the GUI.
Thanks

Hi petroski1, the process of disabling IPv6 in your router depends if you’re using the Classic user interface or the Linksys Smart Wi-Fi. You may refer to this link, for instructions: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=bd520bcb07a6474596169...
If you’re using the Classic one, select IPv6 under the Setup tab and just disable it. And if you’re also using the Linksys Smart WI-Fi, go to Connectivity, select Internet settings, click on IPv6 click edit and make sure to uncheck the enable box.

Similar Messages

How to disable ipv6 address autoconfiguration ???

I am trying to disable ipv6 stateless address autoconfiguration to implement what this document describes:
http://docs.sun.com/app/docs/doc/816-4554/6maoq01o3?a=view
There are several problems though:
1)The manual says that something must be put inside the hostname6.xxx file but then goes on to give the command as it should be given from the command line instead of the content of the file. The manual should provide some form of exapmle content for the file.
2)I go to /etc/inet/ndpd.conf and put "ifdefault StatelessAddrConf false" inside, then I pkill -HUP in.ndpd and finally I issue ifconfig eri0 inet6 token fe80::c/10. However nothing happens. The interface address remains the one generated through autoconfiguration.
Could someone that has knowledge of this subject provide any help?
Thanks very much,
Thanasis

Hi,
I have a same problem, and think we didn't understand the documentation.
Here is the link of the ndpd.conf configuration page:
http://docs.sun.com/app/docs/doc/816-4554/6maoq01qt?a=view#ipv6-ref-10
I think this is the right sintax:
if
Sets per-interface parameters. Use the following syntax:
if interface [variable-value]
Table 11�3 /etc/inet/ndpd.conf Interface Configuration Variables
StatelessAddrConf
True
Controls whether the node configures its IPv6 address through stateless address autoconfiguration. If False is declared in ndpd.conf, then the address must be manually configured. For more information, refer to How to Configure a User-Specified IPv6 Token.
I think the variable is this: StatelessAddrConf
if-variable-name StatelessAddrConf false
I think: if StatelessAddrConf false
But I found the 'false' parameter with uppercase and lowercase letter.
(It is not working for me!)
And I found another configuration file, what is include the rules of the address (/usr/sbin/ipaddrsel ).
Here is the link:
http://docs.sun.com/app/docs/doc/816-5166/6mbb1kq56?a=view
Maybe, I found the solution.
http://docs.sun.com/app/docs/doc/816-4554/6maoq01qt?a=view#ipv6-ref-10
You can creat a logical interface, and you can set the IP address of this interface.
Example 11�6 Adding a Logical IPv6 Interface With the -addif Option of the ifconfig Command
The following form of the ifconfig command creates the hme0:3 logical interface:
// this is teh example, and it is not perfect on Sol10
# ifconfig hme0 inet6 addif up
Created new logical interface hme0:3
This form of ifconfig verifies the creation of the new interface:
# ifconfig hme0:3 inet6
hme0:3: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
inet6 inet6 fe80::203:baff:fe11:b321/10
Here is my solution:
ifconfig e1000g0 inet6 addif 1234:0000:0000:0000:0200:50FF:FE09:B980/10
ifconfig e1000g0:1 inet6 up
# ifconfig -a6
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
e1000g0: flags=2000840<RUNNING,MULTICAST,IPv6> mtu 1500 index 2
inet6 fe80::20d:60ff:feee:aba8/10
ether 0:d:60:ee:ab:a8
e1000g0:1: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
inet6 1234::200:50ff:fe09:b980/10
I have special IP address, but I don't know that it is working or not.
If you have any idea, please write!
Br,
Sanyi

How to disable IPv6 for loopback adapter (lo0)

I was wondering if anyone knows how to disable IPv6 for the loopback (lo0) adpater. I know how to do it for other adapters using the Network preferences pane, but lo0 doesn't appear there...
Thanks,
- alan

I need to temporary disable ipv6 address of lo0 (which by the way is not 127.0.0.1 but ::1) for testing development purpose..

How to disable IPV6 on localhost

Someone known how to disable ipv6 on the lo0 interface ?

I need to temporary disable ipv6 address of lo0 (which by the way is not 127.0.0.1 but ::1) for testing development purpose..

How do I recover a forgotten parental control password on ipod touch

how can I recover a forgotten parental control password for ipod touch 4?

Forgotten RESTRICTIONS Passcode
- Place the iOS device in Recovery Mode and restore via iTunes. For how to restore: iTunes: Restoring iOS software
You have to either:
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod

In-App Purchasing disabled. Check your parental control settings and try again

I have played games for quite a while and have used the purchased many "lives" for games, etc. For about a week now, whenever I go to purchase some like this, I receive the following error message: "In-App purchasing disabled. Check your parental control settings and try again later."
I have read the threads about this and have done everything that was said to do. I go to settings > General > Restrictions. I ensured that "enable Restrictions" is turned off.
But I still receive the same error message. I have an ipad 2 with IOS 7.1.
ANy further ideas? Is there something in the iTunes store that needs to be checked?
I've about given up. Thanks for any help

I will try doing this, but I would like to add ... if I'm playing Candy Crush and want to buy additional lives, etc., I have no problem in purchasing them. Could it be the specific game that is not allowing me to buy anything? And I know this doesn't make much sense either, but I'm grasping at anything here because I've purchased them before.
You said to turn on in app purchases .. When I go into Settings > General, I'm ensuring that Restrictions are Disabled, correct? I can see the "in-App purchases" but I'm not able to do anything with it since my restrictions are disabled ... Is this correct? I'm a little confused here.

How do I get rid of parental controls? I've unlocked them, but they keep coming back.

How do I get rid of parental controls? I've unlocked them, but they keep coming back.

Can you explain what you mean? You can't apply parental controls to your own (admin) account - only to other user accounts. Are you the admin on your computer?
Matt

HT4667 How to disable IPv6 on MAC OS X Lion?

Hi everyone,
I am using Macbook Air OS X Lion. I have been facing slow internet browsing problem from quite a while now. I checked the forums and found that lot of people are facing the same problem. Also found that disabling IPv6 or setting it to manual mode will help fixing the issue. But another big challenge is how to do it. I tried setting it to manual which would need router address, IPv6 address and prefix length which is supposed to be collected from your ISP. Unfortunately Comcast hasnt implemented IPv6 yet so couldnt find that information. Also couldnt find the disable option as mentioned in one of the Apple article.
So I am stuck with Macbook air with slow internet speed. If anybody could help, it would be much apprecaited.
Thanks,
SJ

robughblah wrote:
see https://answers.syr.edu/display/network/Disable+IPv6+on+Mac+Lion+and+Mountain+Li on
This solved my problem. Thanks

How do you disable mobile account settings/parental controls

My school had a one-to-one macbook program, but I switched schools. Now i have a heavily restricted computer. They had my account set to mobile and had parental controls enabled, so I used single user mode to create a new admin (remove /var/db/.applesetupdone and reboot) and remove them. However, even though no account has parental controls turned on, they are still enabled somewhere for all accounts, even admins. I have two questions: how do i disable mobile account settings, and where are the parental controls files located? I found some in /library/managed preferences/<account name here> , but editing these gives only temporary relief from parental controls, and they are reset when i restart. There has to be somewhere else that parental controls are flagged as on/set to sync on login. i removed the actual parental controls executables and stuff somewhere in /system but after that i couldnt open activity monitor and i didnt want to risk a reboot. please help me as this is very annoying. btw im on OS X 10.6.7

HI,
Try this..
Open System Preferences/MobileMe and select the Sync tab.
Deselect the box where you see: Synchronize with MobileMe. The last sync will noted at the bottom left side of the window.
Carolyn

ITunes 10.5 Parental Control Issue - Cannot Disable Check for Updates

We are looking at updating to iTunes 10.5 in a large company.
Normally we add the following key to lock parental controls and disable the check for software updates.
This locked or greyed out the check for updates check box. This does not seem to work in the 10.5 release.
This did work in iTunes 10.4.1.10.
Here is the registry key we are using.
[HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls\Default]
"AdminFlags"=dword:00000101
kParentalFlags_Locked
0x00000001
1
kParentalFlags_DisableCheckForUpdates
0x00000100
256
Other parental control options seem to work.
Any suggestions?

Same problem here!
Setting the Keys in HKEY_CURRENT_USER\Software\blabla... works finde but neet to be able to set it global!

How do i take off my parental controls if i don't have the password

My mom put parental controls on my I pad but said I am old enough to take them off no but she forgot the password so how would I fix that

Remove restriction passcode
1. Restore to Factory Default
http://support.apple.com/kb/HT1414
2. You can restore from a backup that was done before you enable the Restriction Code.

How do i view websites visited parental controls on another computer

I set up parental controls on the computer and it said I was able to view what the child was looking at by another computer and I'm not sure how to do that.

slyfox4 wrote:
Is there anyway to be able to open both of my iPhoto libraries that are backed up on my hard drive with both my computers?
You can't open them with iPhoto but you can view and restore individual photos in the backups. See the gray box towards the end of Time Machine - Frequently Asked Question #15.

Disable iMac camera with parental controls

I would like to upgrade my daughters eMacs to iMacs but have real issues with them having a camera in their bedrooms. Cameras that can be exploited by them or outside user.
I am a savy Mac user since '87, I don't have Lion yet and want to get my girls basic iMacs this Christmas.
I don't see the camera in Parental Controls now, if not in Lion, how does one do this?

Hey there Heilmanmatt,
It sounds like the account that is not managed by Parental Controls is very slow when loading webpages but the Admin account is nice and speedy. I would start by loading up the kids' account and checking for any 3rd party plugins that may be installed and interfering with the application. This article will help you do that:
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Then if that is not the case, or that is not the issue I would next reset Safari on that account:
Safari 7 (Mavericks): Reset Safari
Thank you for using Apple Support Communities.
Take care,
Sterling

How to stop pop-ups from parental control

I set parental control on but every time I try to visit a site a pop-up comes saying i can not visit a site when I am not even trying to visit the site that it is saying i can not visit, so how do i keep the parental control on but stop the pop-ups?

If it is ads, download this program which was written by Thomas Reed, a long time poster.
Malware Guide – AdwareMedic – 10.7 and higher
Malware – Adware removal – Apple Support

Disable the popup stating parental controls blocked the following sites

ON OS X 10.9 with parental controls enabled when a site is blocked Firefox throws up a popup stating what sites were blocked. I would like to stop this from happening, as in our environment we bloc Facebook, twitter, and other sites, so when I go to CNN firefox pops up saying a bunch of sites have been blocked and to try allow them. This popup is awful and needs to be removed...

I haven't used this feature...
Is there an add-on in Firefox that you can configure? You can check on the Add-ons page. Either:
* Command+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions.
''If there is an extension related to this function:'' check for an Options button to see whether you can set it to silent operation.
Next, in the left column, click Plugins.
''If there is a plugin related to this function:'' you could try setting it to "Never Activate" although this might completely disable the feature... Usually configuration for a plugin is done externally to Firefox.
If there are no add-ons related to this feature, check whether you can modify the behavior in the parental control software itself.

EA3500 Smart Wi Fi - How to disable IPV6 to address Parental Control Issue

Similar Messages

Maybe you are looking for