Ea4500 and bandwidth monitoring

Hi.
I have a ea4500 router with 3 pc's, 4 iphones, 2 playstations, ipad, ps vita, house cat, and a printer all wired into the internet. There are four of us in the family all using the internet but I suspect one of us is using considerably more than the other. I live in the country and my current isp has us on the max available account - 50 gigs / month. Lately we have been hitting 45 in less than 3 weeks into the month. I would like to know which of the things connected or which person is using the most of the bandwidth up. Is there a program that doesn't require a phd in quantum physics and networking that can monitor this for me and spit out a report on who or what is the hog here?

Bandwidth monitor does not come handy with this device. However, you can dig a little deeper through Google to find third party software that could monitor bandwidth consumption for every device inside the network. I found one that monitors the bandwidth consumption of each application installed on my computer. This one only monitors one computer not the network. You might be able to find a network monitor if you dig a little dipper through the net.
How to Monitor the Bandwidth Consumption of Individual Applications
How to Monitor Your Bandwidth

Similar Messages

Network and Bandwidth Monitor Suggestion?

I was wondering if anyone had a suggestion for a network monitor application that runs well on Leopard Server. I would hope it could provide statistics on different ethernet interfaces as well as filter down to ip addresses. I've used Network Monitor (but it doesn't seem to filter down to monitoring ip addresses) and ntop but I don't know if runs on Leopard. It would be used to check for bottlenecks as well as monitor bandwidth usage for individual ip's. Thanks for any suggestions.

Solarwinds is one of the best tools our clients purchased for pinpointing issues on their LAN. All too often a tech points to the network as a problem, only to find through Solarwinds that the problem is related to CPU or memory or disk space, etc. Solarwinds is easy to use and the amount of time and trouble it saved payed for itself many times over in a very short amount of time.
Don

NetFlow and Bandwidth Monitoring on SGE2000

Hi guys,
Does anyone know if the SGE2000 supports NetFlow?
I've checked the Cisco docs and also called Cisco support to which no one has been able to answer me, either yay or nay, just no one can give me an answer which is really bizarre.
Anyhow, just in case it doesn't support NetFlow, has anyone been able to set up something that would be able to check the bandwidth usage on each port?
I've got a problem where I think the SGE2000 switch is failing when I pump around 190~200Mbps through x2 of the ports (Server A on port 1=130Mbps and Server B on port 2=60Mbps) of Multicast traffic (UDP). I can measure the output from the Streaming servers that provide the multicast content, thats how I know the input to the switch and I know that there are no packets lost or any errors departing from the servers, yet when I increase server B to say 80Mbps, I get break up and all sorts of problems on the client end STBs and it is happening on the multicast content provided by Server A too which is a different source, so I'm 99.9% sure its a SGE2000 switch problem which is why I'd like to monitor it somehow...
Can anyone help? Any suggestions? Would be appreciated.

Pietro,
The information I have found on the cisco.com site just shows net flow works with catalyst switches and certain routers. So I would say NO: SGE2000 doesn’t support Net flow
http://www.cisco.com/en/US/products/ps6601/prod_white_papers_list.html
Once you get some captured data call back into the support center @ 1-866-606-1866 and open a case to start process of obtaining a resolution.
Thanks,
Jasbryan

EA4500 and Traffic Monitoring / Logging

Hi all,
I'm thinking of switching to another ISP which is faster and cheaper than who I'm currently with.
Only problem is they have data caps.
Does anybody know of a way to log inbound/outbound traffic usage with this router so that I can make sure I'm not going to hit monthly limits?
Thank you.

It’s actually an option that you can enable on this router. You can enable the log on this router to allow you to monitor traffic between the local network and the Internet. If you are using the classic firmware, you can enable it by accessing the router page > Administration > Log. If you are using the smart wifi firmware, this link will give you the instructions:Enabling the Logs feature using your Linksys Smart Wi-Fi Account.

Inserting a Flash video and the Bandwidth Monitor

I am new to Captivate, and I want to be sure I'm following
some practical guidelines for inserting Flash video in my Captivate
slides.
I know there are quite a few variables relating to practical
bandwidth usage--basically, we are creating elearning presenations
that will have "talking head" videos embedded within. These
presentations will be available for download via our LMS site, both
within the US and overseas.
I have utilized Captivate's Bandwidth Monitor to gauge the
bandwidth hit each video slide is responsible for. However, I don't
believe the numbers I'm getting back: because I've set each
embedded video to "Pause slide till end of video", all the slides
are reporting the same length in seconds, KB per sec and Video KB
numbers.
Can someone suggest a practical method for setting up the
videos such that the Bandwidth Monitor can interpret them
correctly? Can you also suggest a rule of thumb for maximum length
for each slide with an embedded video (320 X 240) in it?
Thanks in advance,
Carl

I am new to Captivate, and I want to be sure I'm following
some practical guidelines for inserting Flash video in my Captivate
slides.
I know there are quite a few variables relating to practical
bandwidth usage--basically, we are creating elearning presenations
that will have "talking head" videos embedded within. These
presentations will be available for download via our LMS site, both
within the US and overseas.
I have utilized Captivate's Bandwidth Monitor to gauge the
bandwidth hit each video slide is responsible for. However, I don't
believe the numbers I'm getting back: because I've set each
embedded video to "Pause slide till end of video", all the slides
are reporting the same length in seconds, KB per sec and Video KB
numbers.
Can someone suggest a practical method for setting up the
videos such that the Bandwidth Monitor can interpret them
correctly? Can you also suggest a rule of thumb for maximum length
for each slide with an embedded video (320 X 240) in it?
Thanks in advance,
Carl

MIB Required for Bandwidth Monitoring on Cisco 3800 and 3900 series Routers

Hi Team,
Need your help here.
I am planning to do Bandwidth Monitoring on Cisco 3800 and 3900 series Routers. I want to know the exact MIB which I need to use for getting this done.
Thanks,
Karthik Anbumani

Matt, based on feature navigator GLBP is supportted on 3800 series.
Go to this link and search by feature (GLBP)
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
HTH
Jorge

Video card to run 2nd and 3rd monitors cs5.5

Hello all,
I have a powerful system with multiple hard drives that I use to cut HD DSLR footage on in CS5.5. My GTX 570 runs my 1st monitor and my 9600GT runs the 2nd and 3rd monitors with great success.
1st monitor = timeline
2nd = bins
3rd = full screen preview (Highest quality preview)
The reason I use the gtx 570 to run only the first monitor is because it idles much higher and hotter connected to two monitors. (Disables the down clocking feature on the card when connected to multiple displays).
Well the 9600gt has died.
I don't want to spend alot of money here but I am not sure what video card I require for my 2nd and 3rd monitors. Keep in mind the 3rd monitor is the full screen preview.
I know premiere pro uses my 570gtx for the MPE but I have no idea how this effects (if it does at all) my 3rd preview monitor since I have had it plugged into my 9600gt.
There for I am not sure if I can get away with a cheap card like a $50.00 Nvidia GT 610 or do I need something at least equal or greater then my old 9600gt?
Thanks!,
Kieran

Thank you for the reply Harm. I have an x79 board with a 3930k @ 4.6ghz.
I will take that advice on board.. I might have to fork out a bit of extra money. Shame I only purchased the 570 gtx a couple of months ago!
Found this card....
Gainward GTX550Ti 1G DDR5 DVI HDMI
Internet Price:    $111.00
Barcode :
426018336-2050
GPU :
GeForce GTX 550 Ti
GPU Clockspeed :
900 Mhz
Memory :
1024MB GDDR5 192bits
Memory Clockspeed :
2050 Mhz
Pixels per clock (peak) :
N/A
Bandwidth :
98.4 GB/s
Ramdac :
400 MHz
PCI-Express 2.0
Cooling :
2-Slot Fan
Video-Features :
HDMI
Connectivity :
DVI-I + VGA
Would this be sufficient??
Thanks!!
Kieran

Is Bandwidth monitoring possible?

Hi,
I wanted to monitor my internet usage. Is it possible to build a bandwidth monitoring application using ActionScript 3.0 (with AIR + Flex).
Aim:
Get total downloads and uploads going via ethernet.
(If possible display the list of ethernet cards and wifi cards and the user can select the one needed to be monitored).
Also get the time of connection.
+(optional)
Automatically monitor if any transfers goes any ethernet or the ethernet after selecting the specific one thereafter.Any resources or any ideas regarding the above.
Thanks.

Dear Siva,
we did nearly the same in LV 4.0 times where the G Webserver was not integrated into LV. The only difference is that we used a java applet instead of javascript. It was running fine with Netscape 3 and Internet Explorer 4 on Win NT 4 machines.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Nbwmon - ncurses bandwidth monitor

nbwmon - ncurses bandwidth monitor
* Print bandwidth graphs.
* Print current, average and maximum transfer speeds.
* Print total traffic.
* Scale to full window on startup and resize.
* Detect active network interface.
* Support for multiple units.
* Support for colors.
git:
https://github.com/causes-/nbwmon
screenshot:
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by defer (2014-10-03 19:15:19)

defer wrote:
nbwmon - ncurses bandwidth monitor
features:
print bandwidth graph
print bandwidth, peak and traffic
scale to full window on start and resize
support for colors
git:
https://github.com/defer-/nbwmon
screenshot: http://i.imgur.com/W1H9ZXI.png
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
The flicker was bad so I fixed it
[ nbwmon ]$
└──╼ diff ./orig.nbwmon.c ./nbwmon.c
83,86d82
< endwin();
< refresh();
< clear();
<
101d96
< endwin();
121,122d115
< clear();
<
154,155d146
<
< refresh();
183d173
< endwin();
201d190
< endwin();
248d236
< endwin();
271a260
> doupdate();

Dashboard - a memory and bandwidth hog?

Hello everyone,
This is a general question about widgets really, concerning how much of a memory and bandwidth hog they are.
I only have a few widgets on my Dashboard, as I'm worried they'll slow my Mac down. Can this happen, and does it only happen when I 'invoke' the Dashboard?
Also, as some connect to the internet, are they a bandwidth hog? (and again, are they only 'on' when the Dashboard is invoked, or always connected in the background?).
Many thanks for any advice!
Ben

So are these things always running in the background, or only when I chose to bring Dashboard to the fore?The first time you activate Dashboard after log in. Try it. Logout then, back in and check Activity Monitor, then activate Dashboard and check AM.
With AM you can always keep an eye on your memory and quit apps, even if they may not "force quit". However, the way OS X handles memory you shouldn't have a problem unless you're doing heavy lifting like music/video edit.
-mj
[email protected]

Server bandwidth-monitoring

so..right now, I'm using ntop (http://twilightlair.net:5000) as my bandwidth-monitor for my server. The two problems I have are that:
1. When looking at traffic summaries, it lists specific hosts with how much traffic they've sent/recv'd. instead of the destinations they're going to (i.e. which subdomains and whatnot.) It does say what subdomains they've gone to when you look at detailed info but that doesn't help much if there all a million hosts to sift through.
2. Almost half my traffic is just listed as "Other TCP/UDP Ports." The only way I see to get port-info is the "last minute distribution" on the bottom of the main page, not a monthly summary or something of the like.
any ideas?

I'm not a big fan of ntop for the same reason. I'm currently evaluating bandwidth monitoring tools to see which best fits my needs. There's a great listing of bandwidth monitoring tools for linux, along with a short description on this page: http://www.ubuntugeek.com/bandwidth-mon … linux.html I've learned of a handful of tools I didn't know about that I'll be experimenting with.
My needs are slightly different than yours, however. I need to take bandwidth measurements throughout the day at sample intervals and record the results into a log file or csv. I'll combine this with a script I wrote to upload a large file during the bandwidth test. I need to know the maximum upload rate in order to dynamically adjust my traffic shaping parameters.
Let me know which tools you end up using.

What is difference between BP monitor and supplier monitor?

hi friends
what is difference between BP monitor and Supplier Monitor
what is tcode for BPmonitor
Regards
Vinny

Hi Vinny,
Please refer to the following links. These seems useful:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f051efda-bc58-2910-3785-e60d1f798c96
The specified item was not found.
New Business Process Monitoring functionalities in SAP Solution Manager ALE / IDoc Monitoring
Regards,
Saumya

Macbook Pro and External Monitor flashing?

I am using a Macbook Pro with an External Dell 1908fp 19" monitor via a Thunderbolt to DVI adaptor all fine.
However the annoying niggle I have is that the monitor which seems fine, keeps flashing intermittently on and off randomly?!?
Would anyone know why this is happening and if its the Mac's fault? I have the MBP open and the Monitor as the 2nd screen at 1440x900 which it seems to have defaulted to, and its very clear on both screens.
Is my monitor on its way out? it seems ok, and is quite new (though it was 2nd hand a couple of years ago) or is this a known Apple issue?
Thanks for any help

The graphics card in the MBP supports resolutions far greater than that of the internal display, so any modern monitor will work fine - up to and including Apple's excellent (but pricey) Thunderbolt display and Cinema display.
The MBP will detect the external display and set the image to the correct resolution automatically, or you can choose the resolution in System Preferences -> Displays, so you don't need to worry about a black border.
Most modern monitors are 1080p and this works perfectly as an external display for a MBP. You will need a mini-displayport to HDMI cable to connect the two. If you get a monitor with built in speakers then that cable will also transfer audio.

Wily Introscope is not running in Solution Manager 7.1 and tech monitoring

Hi Experts,
we are able to log in wily introscope, But metrics(values) are not coming in wily
we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
thanks in advance for you help
Best Reg

Hi Srivastav.
Actually i am new to solution manager, and we have done basic steps of solution manager like
system preparation,basic configuration,managed system configuration and technical monitoring,
in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
Best Regards,
Hanuman

Viewer and External Monitor doesn't playback at same time

When watching clips in the viewer window, they playback fine. But on my external monitor, it only shows the first frame from when it's played. when I stop playback, the external monitor then shows the last frame the Viewer window is stopped on. How can I fix it so that the viewer and external monitor playback the clip at the same time?
At the moment we're digitizing footage with the Offline RT Photo JPEG codec set to 75% quality.
A few days ago we were digitizing footage at 35% quality and that footage plays back fine. We moved to 75% quality at the editor's request. A few days ago we had created a few sample 75% quality tests for the editor to view. I loaded those clips into Final Cut right now and they playback fine as well. So it's all of a sudden just these new clips created yesterday :S.
Message was edited by: Phillip Roh

Yes.
Forgot to mention that the timeline plays all the footage back properly on both the canvas window and the external monitor. Sorry for not mentioning that sooner.
More discoveries! The playback 'freeze' only happens if I open a clip from the browser into the viewer. If I open a clip from the timeline into the viewer, it plays-back fine!
Message was edited by: Phillip Roh

Ea4500 and bandwidth monitoring

Similar Messages

Maybe you are looking for