EA4500 blocking one IP on its own!
Somehow my EA4500 has started blocking one specific IP .
I can access that IP if I plug into my modem directly, but not when I access the net via the rounter.
The IP is for a website I manage!
Anyone have any ideas about what to do? Do I need to reinstall the firmware? Will the config file contain the blocking if I reinstall the firmware and restore the config?
I do not have any sites blocked according to the router interface.
Any help/advice appreciated.
Dave
http://website-4-rent.com
Solved!
Go to Solution.
The ip address in question is a goodaddy shared hosting IP with over 6700 different domain names besides mine hosted on it .
I did a search for other domains on the same ip and cannot access any of the other domains either, so it is not my site blocking me.
I can ping and access and loginto the website fine when connected to the modem only, but not when the router is inline. I'm pretty sure my ip address to access the internet is the same whether I am connected to the modem directly or via the router. I would have to reboot the modem connection to get a new ip and I generally have the same ip from my isp for as long as I dont reboot the modem.
I have run through it all with godaddy support and with my isp and the router is the only variable in it.
But thanks for the suggestions.
I wonder if the firmware of the router got corrupted somehow to block one external ip? It blocks that ip for web browsers, my ftp program and the routers own ping and traceroute functions! When I do a traceroute it stops at the second hop which is an internal to the router ip address (172 block), I believe its firewall. I tried turning off the firewall, but no change.
http://website-4-rent.com
Similar Messages
-
I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference.
I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry. -
Port going into blocking mode because sees its own BPDU
Hi,
6509 trunks with Aruba 3600 controller that connects (VPN IPSec) to around 110 Aruba APs, these are usually home offices, some of which are having switches connected to the Aruba ports for switchport expension.
There is only one uplink to the controller and no alterneate path what so ever. The port is going into "Back BLK" because of seeings its own BPDU. So after working with Cisco TAC, we deterimed that there has to be a physical loop somewhere behind the 3600 controller ( hub device) or potential software bug that cauases the BPDU to turn around.
Now TAC has recommened to implement bpdu filter on the uplink trunk to help determine the source of the loop and look at MAC flaps/notification. The uplink trunk has 3 VLANs and only 956 is being affected. The senior mgmt is affraid that implementing the bpdu filter will cause more harm.
We dont't have access to all RAPs because of how big the network is, so the only place where we do configuration changes is Cisco. Aruba saying there is nothing with their software that could be casuing this.
Any advice here is highly appriciated
Attaching a hand written network diagram
VLAN0956
Spanning tree enabled protocol rstp
Root ID Priority 8192
Address x.x.x.x x.x.x.x x.x.x.x
This bridge is the root
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 8192
Address x.x.x.x x.x.x.x x.x.x.x
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300
Interface Role Sts Cost Prio.Nbr Type
Gi2/27 Back BLK 4 128.155 P2p
interface GigabitEthernet2/27
switchport
switchport trunk encapsulation dot1q
switchport trunk native vlan 955
switchport trunk allowed vlan 954-956
switchport mode trunkHi, i think your problem with aruba, you can try with disable DTP on trunk port "switchport nonegotiate"
and make sure uplink interface from both side have 1 connection with vlan 956
Regards,
Habibi -
EUL in its own schema or in each data schema?
I have a fairly basic question. In our QA environment, we have 3 schemas (QA1, QA2, QA3). data in each gets changed so the DB structure is the same but the data isn't. Our users want to be able to point the EUL at any one of the three for testing purposes easily without recreating synonyms. Does it makes sense to create the EUL tables in each schema, that way we don't have to qualify the tables in the EUL <owner>.<table>? Is there a way to work it with just 1 EUL in it's own schema?
Thanks.Hi,
It is probably easiest to create one EUL in its own schema. You can easily change which schema the EUL references by highlighting all the folders in the EUL are changing the owner property.
Rod West -
Multiple ifs services each with its own agents
I would like to be able to do the following:
Ability to run multiple ifs applications on the same box (beefy one) each with its own set of agents. Ifs 1.0 config tool (ifsconfig) always creates IfsDefault.props file. Can I rename that file to something else and use the new name as the service name in the application?
What about the agents defs? Do I need different server managers? How do I tell which service relates to which server manager?
I would like to know how to do this on both ifs 1.0 and ifs 1.1.
Thanks.
nullDoes anyone know the answer to this?
-
I have multiple phones and iPads and all are linked to one iCloud account and one iTunes Account. I want to keep the same iTunes Account so I can share music, etc., however, I want each device to have its own iCloud account. Any help on how I can I do this?
You'll need to create an Apple ID for each device. Use the new Apple ID for FaceTime, iMessage and iCloud on the device. Use the original Apple ID for Settings>iTunes & App Store.
-
i have an IPone 4, there is an add video for Capital one that keeps coming up on its own... ive deleted my history and cookies and this video keeps taking over my phone. how do i get rid of it? the video is of a man with a puppet and the puppet is singing a song while he is checking his phone. how do i get rid of it????
If it happens again the make sure that you aren't suppressing website colors.
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*https://support.mozilla.org/kb/Options+window+-+Content+panel
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong -
One note starts on its own when I use Remote Desktop connection
Whenever I use RDC to connect to my home server, One note start and pops up totally on its own on my local computer.
Can anyone explain why, and more importantly how I can stop this behaviour?After hours of reading through forums and posts similar to this one, and knowing the proposed work-arounds were not going to be accepted by my client that was having the issue, I came to the conclusion that it had to be a print driver or the software that
gets installed along with the print driver on the server that was causing my issue.
I started searching and came across some Epson software that was installed on the remote desktop server when I was trying to get a scale house ticket printer to work as a network printer. The printer was not installed on the server but the software remained
in the add and remove programs list.
I removed the three Epson entries in the add and remove programs list and the problem stopped.
I don't know if this was mentioned above but the behavior I observed was that the print job was going to multiple printers, not just OneNote. I my case if I removed the OneNote pritner I would then get prompted by the Microsoft XPS Document Writer for a
file location to save to.
I could open the print queue for each of the printers that were getting redirected on my local machine, I would then log in to the remote desktop server that I was having the issue on. I could see the "remote desktop redirected printer doc" get
sent to each printer. If the printer was online it would flash for only a moment and the printer would ignore the job as if nothing had been sent to it. If the printer was offline the job would stay in the queue.
I think this was mentioned above so I will reiterate, don't approach the issue like it is a problem just with OneNote or with a particular driver from a particular manufacturer. We know at the very least that the problem can be caused by Samsung driver/printer
software and by Epson driver/printer software so it stands to reason that there can be other drivers/printer software packages that can cause the same problems.
I hope this helps! -
Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes
I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position). -
A new album purchase downloaded each song as an individual album, each with its own album cover. How do I consolidate all songs under just one album cover like the rest of my library? How did this happen?
Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
BTW, are you really still using Windows 2000?
tt2 -
I bought an iPhone 4 about 3 days ago at radio shack. But I didn't get any warranty on it and it seems to be restarting itself on its own. If I want a new one do I have to buy it or can I replace it?
If you bought a new iPhone, it is covered under warranty. There's nothing to get, it simply is covered.
To check the warranty and support coverage, go here and enter the device serial number. -
This is an odd one, does Logic have its own clock?
Hey all,
This is one for the books over here. Does Logic have its own clock? Not as in clocking, 44.1 48 etc. Not in that respect, but rather does Logic have its own "date and time" clock separate from OS X?
Here's what's happening...
We have two rooms here. Identical. Writing done in "A" gets sent over to "B", cleaned up, sent back over to "A" etc etc. So in the "A" room, a cue comes from "B" with a last opened time of last night at 10:00 pm. A last modified time of 10:15 pm last night. That's the data if you get info on it from a finder window. Now with Logic open if you "open" a cue from Logic, navigate to where this cue is at, it says that the cue was last opened TONIGHT at 9:40pm (which is in the FUTURE) and last modified TONIGHT at 9:55pm (also in the FUTURE). We've caught it now, and things seem to be okay if you open a cue from the finder window and not from Logic->File->Open. A cue was opened from Logic yesterday, two hours of work done, saved often, and when it was closed and then opened again after lunch, none of the work was present. And the date and time modified was again in the future. So SO weird. Cleared prefs, repaired permissions. Still happening. Anyone else experiencing this? Any tips? Advice? Does Logic have its own clock? We're baffled.
Any help is greatly appreciated as always!
Best wishes,
the Earle-Tones Music crewBrent, thanks for seconding in here. Sometimes this kind of you'd-never-expect-it-to-happen-weirdness can be easily written off as some kind of itinerant digital voodoo without this kind of corroboration.
So while we're on the subject of the finder lying... Folders are no picnic either.
If you create a folder and never open it but throw a bunch of stuff into it within the same minute that it's created, its creation date and modification date will be the same. But the simple act of opening that folder for the first time can cause its mod date to change. Or, if you go into that folder and re-organize some items, or rename some items, the folder's modification date will also change.
This means that if you have a bunch of folders contained within another folder (the "containing folder"), and you re-organize/re-name items within those folders, you can't count on the modification date of any one of the contained folders to indicate the order in which they were originally created. Because of this behavior you'll want to view by date created. But I still can't get my head around the idea that manipulation of data within a folder causes the attributes of the containing folder to change.
This may have some bearing on your current situation... or then again, maybe not LOL! : - )
-=iS=- -
Password Reverted To Old One On Its Own
My Mac Pro had the Veil Of Death crash screen earlier today for some reason. When I rebooted the computer, my primary account (which is one of two admin accounts) would not accept my login password.
I changed the password on this machine a couple of weeks ago, and on a hunch I tried my old password, which worked. How can that be?
I confirmed that the password had been changed from what I had been using by firing up the laptop and trying to access the Mac Pro machine with Apple Remote Desktop. ARD keeps the machine passwords memorized for the initial connection to be established. ARD would not connect until I edited the profile for the Mac Pro and changed the password to the old one. This confirmed in my mind that I wasn't somehow confused about the password.
What's even weirder is that after logging in, Software Update is now telling me it wants to install updates that it already has...the latest Garageband 4.1.1, Quicktime, and Security Update.
So I have a few scary things going on here:
First, a crash alters the password on the account. I can see corrupting it where you can't login at all with any password, but changing the password?
Second, how did it REVERT to an old password? When I changed the password a couple of weeks ago, shouldn't the old password have been wiped out somehow?
Third, why is software update thinking I don't have updates I already do. I know I installed these updates previously, because I made some ringtones in Garageband, which require the update it's trying to reinstall.
This is a Mac Pro with 10.5.1 and all updates applied.
I'm really freaked out about the magically changing password. Any ideas?Oh man, this gets even weirder! I just let the software updates installed, and when I tried to login to the computer, the "old" password that I had just booted and installed updates with wouldn't work!
So I tried the proper password that I had changed to a couple of weeks ago, and it worked!
This is wild. I didn't change the password in weeks, and now it's flopping back and forth on its own.
This sounds like a serious bug in the works. -
I have one Icloud account for my iPhone 6 plus and my ipad. I have no stoage left. So if I set up an Icloud account for the ipad it will have its own storage then I can take it off and open up some storage on my phone.
In case you're not clear - iPad/iPhone storage, and iCloud storage, are totally separate. Buying more iCloud storage does not give you more storage space on your device. Your device has a fixed storage space for apps and data (e.g., 16GB - which is more like 12GB in real terms). iCloud storage just allows you to store more documents, mail, photos, etc, in the cloud.
Matt -
After one year, my Droid Razr Maxx is shutting off on its own.
After one year without problems, my Droid Razr Maxx has begun to shut off and occasionally restart on its own several times a day. Sometimes when it shuts off, it can take as long as fifteen minutes before it will start again.
I have tried deleting all of the applications I've installed since recently before the problem began, but the problem persists. Is this a known issue? Have there been any recent updates that might be causing this behavior? Does anyone have any additional things I can try before sending my phone to Verizon?
Thank you.I also have this problem which occurs under two sets of conditions. First, if the device is left on charge for a couple of hours after getting to 100% it shuts down and cannot be re-started with the power button. The second is that if I take the device out of my belt holder and leave it alone for a couple of hours, it shuts down the same way,
How to re-start the phone
For both conditions, the device can be re-started by simultaneously holding the power button and the lower end of the volume button. This produces what is called a "soft boot."
It has worked every time so far since the problem cropped up earlier this year. I got the device in March 2013.
Addressing the cause
Verizon in its forums advises users to clean the cache with a complicated series of steps that drop the user into a normally hidden portion of the operating system. See URL below.
https://community.verizonwireless.com/thread/801488
I am using Easy Cache (URL below) to clean out trash files that accumulate on the device, Unlike prior versions of Android, in 4.1.2, here is no easily accessible menu option to do this. So far over a period of several months I have not had any issues with Easy Cache other than its constant promotion of additional Apps in which I have no interest.
https://play.google.com/store/apps/details?id=com.bazinga.cacheclean&hl=en
Note that trash files accumulate quickly and that a clean out at least every other day can remove several hundred megabytes of temporary files.
Theories about the cause of the problem.
The first is that in the case of leaving device on charge for too long produces a false signal to the operating system of an extremely low battery condition and the device shuts down.
The second is that in the case of leaving the device on a desk for several hours,with no detectable motion, sets off a routine in the operating system to protect the battery draining completely. This issue is a head-scratcher since there is really no difference between doing that and leaving the phone on your nightstand for 6-8 hours while you sleep.
Feedback to Verizon and Motorola.
This problem needs to be fixed. A review of various Android forums on the Internet shows a lot of traffic about it some of it going back more than a year. See this shortened version of the Google search string http://bit.ly/13Q6pkp
This is not something you can stick you heads in the sand about as disgruntled customers are reporting in this problem forums, and with increasing frequency, they are returning the phones or seeking alternatives.
Maybe you are looking for
-
Mini dvi to Component Video adapter !
Help ! Where Can I Find "mini dvi to Component Video adapter" ? Help !
-
i need help. i am currently in mexico city. i was staying at my cousins house and yesterday when we got back for going to museums we saw that the apt had been broken into and everything taken including my ipad. i have it set up with icloud so i trie
-
Boot Camp not able to install Windows 7 Ultimate 64 Bit!!???
Guys I'm using Mac OS X Lion 10.7.2 & I'm having a problem installing Windows 7 Ultimate 64 Bit through boot camp. When I insert the windows installation disc it creates the partition but as soon as it restarts to proceed the installation, it hangs u
-
Any ideas why some boxes/domains would get "access denied" on nmConnect?
I have four boxes running NodeManager, with 2-3 domains on each box. I want to be able to use WLST to connect to the NodeManager on each box, to perform certain operations. On each box, I've created each domain using the same process (it's entirely p
-
Change size of Pace Display; Pace Feedback
I already have a watch to tell the time. How can I change the nano display so that the pace numbers are the largest? Likewise, it would be good to get feedback on pace at km intervals as in a race.