EA4500 Firmware Ver: 2.1.38.138880 fails to install

I have tried twice to upgrade my Firmware from Ver: 2.1.38.138827 to Ver: 2.1.38.138880 Both attempts have failed (Let them sit for over 10 Mins with the Flashing Cisco Logo).
To get my router back to a usable state (I found an unbrick thread on another forum via my Phone)
1. Hold down Reset for 30 Secs
2. While Holding Reset, unplug the Router.
3. While still holding the Reset, plug the router back in and hold the reset for an additional 10 secs.
4. Wait 10 Secs
5. Press the little blue button.
6. Wait 60 Seconds, if it doesn't come up (Logo stops flashing) Unplug the router for 30 Secs and power it back up.
After running through all this the firmware seams to be reverted back to Ver: 2.1.38.138827
Has anyone had any luck getting this installed?
Solved!
Go to Solution.

1. Download the Firmware FW_EA4500_2.1.38.138880.SSA.zip and save it my Download Directory (For me I have a Second HD where I store my files... D:\Downloads\)
2. Login to the the Router at http://192.168.1.1 via a browser (FYI, I'm using Chrome)
3. Click the "Connectivity" link on the left hand side
4. Under "Firmware Update", within the "Manual" block, click the "Choose File" button
5. Locate the File I downloaded in step 1. For me it is located at "D:\Downloads\FW_EA4500_2.1.38.138880.SSA.zip"
6. Highlight the file and click the "Open" Button
7. Click the "Start" button
It runs through an upload process and then says the Router needs to reboot and to press "OK"
8. Press "OK"
A "Wait" dialog box appears.
I have let this sit for over 10 Mins and the Cisco Logo on the router continues to just flash. Eventually the Browser will come up with a page can not be displayed error.

Similar Messages

PC Suite ver 7.0.8 update fails to install on Vist...

I have PC Suite ver 6.85 installed on an ASUS laptop running Vista Business SP1. When I try to update to the latest version of PC Suite 7.08 the installation program runs to ca. 80% and then crashes with the message "Previous version of PC Suite cannot be uninstalled"? Has anyone else encountered this and is there a work around? I have tried uninstalling 6.85 with CCleaner but the install of 7.0.8. still fails with the same message. Any help please.

Hi dingo,
Try to check this link mentioned below, check for any updates available... Its purely on your own risk you can download new patches from MS if any.
http://www.microsoft.com/downloads/details.aspx?familyid=200B2FD9-AE1A-4A14-984D-389C36F85647&displa...
If you are ready to take risk Go ahead... Hope it may help you ... Best of luck

What is new in Nokia 6500s update firmware ver. 6....

What is new in Nokia 6500s update firmware ver. 6.6?
Nokia N73. V 4.0812.4.0.1 Code: 0529786
Nokia 6500 Slide V6.6 code: 0556234

After updating mine yesterday...da screen refreshes or so flickers every say 5 seconds...plz any help
i have reinstalled it three times... ..still no solution
Message Edited by prubyholl on 04-Dec-2008 07:20 PM

Linksys EA4500 Firmware

Hi! I downloaded a new firmware EA Series Linksys Smart Wi-Fi Firmware Ver.2.1.39.144146 (10/31/2012) and I can't find the option that hides my SSID. How to select the channel? Help, please!
Solved!
Go to Solution.

Yes that is normal. I will suggest to select the channel with the less interference and does not overlap with other wireless devices available in the area.

When will firmware ver. 20 for N97 be released for...

It has been a while that firmware ver. 20 is released for N97 all over the world. Less than 24 hours after its release for the first time, it was SUDDENLY removed (by the NOKIA staff) for some product codes such as N97s with FARSI language support (product codes: 0576556 (black), and 0576575 (white)). Till now, after several weeks, there is no sign of coming back! NSU still introduces 12.0.024 as the most up-to-date version!
Most of the N97 owners with different product codes are enjoying the new firmware all over the world, while N97 owners in Iran are still using version 12! It is not fair!!!
Would you please declare the exact time that firmware 20 will be available for such product codes?
***COME ON guys! please do your best to give it out ASAP! I formatted both of the memories of my phone after the release, and since then my phone is full of nothing!

I'm in the same boat as you OM81BA - I'm on Product Code 0576500 - KSA Black, and still I can only get v12, no sign of V20. It was only released on Oct 27th, so not 'several weeks', but it does FEEL like several weeks when it the rest world seems to have it already.
I was in a telephone conversation with MENA Customer Care yesterday, and their suggestion was to take it to a Nokia Repair Centre for the latest FW upgrade.
It's either that, or just keep waiting.......and waiting.........and waiting......... for no news / dates/ firm commitment.
Silver Nokia E72-1 UK
RM 530
FW: v31.023

Thunderbolt firmware update 1.2 continues to fail on MBP

For months I have been repeatedly asked via software update to run the Thunderbolt Firmware Update 1.2. The update gray screen shows up, but before the status bar can complete, the computer restarts. Other users have gotten relief with unplugging their usb and thunderbolt devices but I have no such devices attached to my computer. Anyone else?

Hello there terrie_808,
If the update still seems to not be taking for your Thunderbolt Display, I would like to recommend the troubleshooting in the following article to help you get that resolved, named:
Thunderbolt Firmware Update 1.2: Keeps reappearing and Thunderbolt ports and Target Display Mode may not work
After installing Thunderbolt Firmware Update 1.2:
Thunderbolt ports may not work.
Target Display Mode may no longer work.
The update may keep reappearing as available for download.
This occurs when a self-powered Thunderbolt device (other than a directly-connected Thunderbolt display) is connected to a Thunderbolt port while installing the update.
To resolve this issue:
Shutdown your computer.
Disconnect all Thunderbolt devices.
Wait 10 seconds.
If you are using a Mac mini with a Thunderbolt display, reconnect the Thunderbolt display directly to your computer via the Thunderbolt port. Do not connect other Thunderbolt devices at this time.
Restart your computer.
If the Thunderbolt Firmware Update 1.2 is offered, download and install it and restart your computer when asked. If the Thunderbolt Update is not offered, the update has installed correctly.
Reconnect all Thunderbolt devices.
Thank you for using Apple Support Communities.
Take care,
Sterling

Failed to install IsKernel Files

Hi everybody,
I am trying t install BBDM ver 4.2 on my PC(OS Win Vista Home basic SP1), but its giving me the err:
1: Failed to install IsKernal Files. Make sure you have appropriate privileges on this machine..
How can I sort this problem? Plz. help.
Regards,
Kanak Sony
http://dodevelopnshare.wordpress.com/ | http://www.linkedin.com/profile/view?id=188131481&trk=tab_pro
Solved!
Go to Solution.

I got the solution for above, by disabling UAC in User Accounts. Rebooted the PC, and re-started the installation and it worked.
Regards,
Kanak Sony
http://dodevelopnshare.wordpress.com/ | http://www.linkedin.com/profile/view?id=188131481&trk=tab_pro

IOS 6 fails to install

iOS 6 fails to install when:
-Downloading & installing from the iPad itself (using 3 different WIFI connections on fully different ISP's)
-Downloading & installing from iTunes on 5 different PC's! (2x Windows PC's ; 3x Mac's)
-Using iTunes to perform a Restore FAILS! How ridiculous!!!
By the way this is a BRAND NEW iPad 3 out of the box! Before anyone asks, it was NEVER jailbroken.
I have come to the conclusion to blame Apple, Inc. for a corrupted download. Fix it now, or I will quickly return. Thank you!
Way to #fail apple!

I am also having this problem with my ipad 3. It's not brand new, but like you said I don't think it has to do with my ipad. The download doesn't even complete. neither to my ipad or even through itunes. I even tried downloading it directly from osx daily and installing it manually (much easier than it sounds) but no go. Said my firmware was not compatible.
Boo.

[SOLVED] Failed to install override security policy

Hi,
I am trying to install Arch linux in UEFI in a dual boot setup with Windows 8.1. I already have the Windows OS installed, but every time I go to boot from the Arch installation CD I made using the latest .iso download (2013.12.01), I get the following:
ERROR
Failed to install override security policy: (14) not found
I hit return on the "OK", (the only available option), and the error reappears once again. After I hit return for a second time, the installation quits and I am returned to a normal Windows boot. This error happens right at the very start, I literally tell my computer to boot from the CD drive and then straight away the error appears.
I have tried the solution suggested here:
https://bbs.archlinux.org/viewtopic.php?id=169354
(i.e. replacing the bootx64.efi with the loader.efi file (but renamed of course), in the EFI/BOOT/ directory of the iso), and I have tried using other versions of the iso (specifically 2013.10.01) as well as re downloading and re burning the most recent iso. All of these have been to no avail.
I am running an ASUS Sabbertooth 990FX (Rev 1.01), which I know to be an UEFI board. Also, I was able to install Windows 8.1 in UEFI just fine.
Any thoughts about what the problem may be?
PS: Merry Christmas to you all!
-Ryan
--- SOLUTION ---
Download the Arch Linux variant of rEFInd, from http://www.rodsbooks.com/refind/getting.html. Then, install as per the instructions for you particular operating system and needs; follow the following: http://www.rodsbooks.com/refind/installing.html.
Reboot. Next time your computer starts, after the POST is completed, instead of booting into your normal operating system/boot loader, rEFInd should load instead. It will search for bootable media and operating systems automatically, and present you with a list of options. Choose the one corresponding to your CD/DVD/flash drive (depending on your installation medium). It should then boot in UEFI.
Once you are prompted with a command shell, type the commands:
# mount -t efivarfs efivarfs /sys/firmware/efi/efivars # ignore if already mounted
# efivar -l
If a list of variables is displayed, then you know you have succeeded in booting the installation media in UEFI!
Hope this helps some people...
Last edited by Machione (2014-01-10 21:32:05)

Lone_Wolf wrote:Buckeye, Machione did you try disabling secure boot ?
Thanks for the response Lone_Wolf.
I had a good old rummage through the "UEFI BIOS setup" for my motherboard (ASUS Sabertooth 990FX rev 1.01), and found no option to either disable nor enable Secure Boot, which I found rather odd, so I did some searching online and found this quote:
"I've recently bought an ASUS Sabertooth 990FX, which is a uefi
motherboard.
Secure boot cannot be ENabled."
from: http://comments.gmane.org/gmane.linux.mageia.user/8143
Intrigued, I then done some more searching, and came to opening up Windows System Information, to see if I had Secure Boot enabled or not already. The result (as shown in the below screenshot), is that Secure Boot is "Unsupported", which means that my "PC does not support Secure Boot or is a Legacy (BIOS) installed Windows". Since I am running Windows already in UEFI, this means that my motherboard indeed does not support Secure Boot, and hence there is no need for me to disable it.
https://www.dropbox.com/s/3to4x7pcxctzz … enshot.jpg
I will send a quick email to ASUS to confirm this finding, but it certainly seems like Secure Boot is not an option that I have, and hence I have no need to disable it in the first place.
Thanks anyway for the response,
-Ryan

10.6.2 failed to install due to 'nfs error', audio no longer works

macbook pro, all other updates have installed just fine, except for 10.6.2
I get this in the log:
11/10/09 3:58:15 PM com.apple.kextcache410 Created mkext archive //System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.
11/10/09 3:58:15 PM com.apple.kextcache403 Failed to mount helper partition: error 0XF8DA000C (DA err# 0x0c).
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 4)
11/10/09 3:58:15 PM com.apple.kextcache403 /: trouble updating one or more helper partitions.
11/10/09 3:58:15 PM com.apple.kextd10 async child pid 403 exited with status 70
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 5)
11/10/09 3:58:15 PM installd376 PackageKit: Install Failed: (null)
Error Domain=PKInstallErrorDomain Code=121 UserInfo=0x104d22740 "An error occurred while updating system extension information." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=70 "The operation couldn’t be completed. Stale NFS file handle") {
NSLocalizedDescription = "An error occurred while updating system extension information.";
NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=70 \"The operation couldn\U2019t be completed. Stale NFS file handle\"";
arguments = (
"-update-volume",
nothing is mounted (i rebooted before applying). not sure why it's giving that NFS error. it's consistent tho.. if i reboot and try the manual install of the patch, I get the same error.
after the failed patch "installed" it left my sound not working... so far everything else appears to work. any thoughts on fixing this are appreciated. i ran diskutil and 'fixed perms' and 'verified disk' ... patch still fails.

Try reinstalling the patch. If you get all the way through the installation, then see if your sound works. If not, then I suggest you do a repair install of Sno by installing Sno over Sno as in an upgrade install. Such an install, while usually very safe, still is an install so be appropriated backed up if you proceed.

Failed to install Creative Cloud desktop error code 1 Windows 8.1

I just recently tried to begin a trial of creative cloud in order to get access to photoshop. I really need photoshop for my school because of how powerful it is and the tools is offers. A couple weeks ago I tried to download and install creative cloud for windows 8 64-bit, and the download begins, but once it reaches around 50%, it raises an error message saying "We've encountered the following issues: Creative Cloud desktop failed to install (error code 1)". I was having problems with the internet at the time so I just naturally assumed it was the cause. So I went ahead and gave it a couple of days before I tried again. When I tried again I received the same error message at the same time. I continued to look around for a solution and trying it everyday but I have had absolutely no luck with it, and honestly am getting quite frustrated with it. I have looked everywhere for a solution, I tried the adobe clenup tool, I have checked to make sure I don't have any previous versions of adobe products on my computer, and even tried installing it as an admin in safe mode, and still nothing. I have no idea what to do next, but I know that I have to get ahold of photoshop, one way or another, and it must have the professional tools included in the creative cloud edition. Please tell me there is a simple solution and I have been blind this entire time. If there is no solution, can someone direct me to another software similar to photoshop that has access to the plug-in dDo? (I am in game development and have heard how powerful dDo is and have been dying to use it. I have also been anxious to get photoshop, but it doesn't appear to be possible without the creative cloud desktop app).

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

HP C1680 fails to install Software

Can you please help
I have just reinstalled my operating system Windows 7 6- bit OS and needed to reinstall my printer HP Photosmart C6180 All in One. When I first got my new PC( Dell XPS 501L windows 7 Intel core i5. 243M 2.40GHz) I originally install the whole package with no issues.
after the reinstall of the OS, this is issue I was I getting when I tried to reinstalled the HP application (AIO_CDA_FSW_Full_Win_WW_130_140.exe )
Error message:-
C:\Users\andylouey\AppData\Local\Temp\7zS4864\setup\HPzPNP.ice.
I have done the following:
Tried to install from an old download of the software. Result Failed to install message as above.
Tried the original install CD and also tried to use them in various compatibility modes. Result Failed.
Downloaded the critical updates from HP solved the above error message result the above error message was solved.
Downloaded the latest install software program for my HP printer from the HP website tried again to install failed
Ran the HP Scan doctor reported that the printer drivers are all working asked it to run the scan program it reported that it need the full install of the C1680 software to run this
I got the download again ran it. It extracts the file then just disappears and looking at the task manager there is not install running. So again failed
For the second time I downloaded the HP installer network printer wizard but this failed and just keeps going round in circles> It finishes the download gets to the extracting point and then goes back to the identify printer( which is listed) then goes back once again and downloads the install software.
Other steps I have taken. I used the old installation disk to do a complete uninstall of all the drivers and software using Utilities> CCC> Uninstall_ L2.bat . This wored and uninstalled the printer and drivers and I think any remaining software. I also deleted all the %TEMP% files that my Laptop would allow.
Then once again I I used the install wizard first without the USB cable disconnected then the wizard asked me to plug it in. I plugged it in and HP Wizard found the printer and downloaded the appropriate software completed the download and extracted it and then NOTHING.
I have also downloaded the critical update:-
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-126392-2&cc=uk&dlc=en&lc=en...
Can you suggest a solution help. In my view I need to start from scratch and remove all traces of any HP software and drivers and start over. My only issue with this I have done this and still have the same issues. If I go to Microsoft uninstall utility there isn’t anything to uninstall.
Thanks in advance for your reply.
PS. HP wizard has finished downloading for the fourth time and looping to discovering the device again :-( HELP!!!!!!!!
Thanks in adbance for your replies Andy

Hi
Thank you for your reply and your advice and help
If you look at my help request aboveI have described that I have done your suggetion and yet there are still traces of HP on my hard drive and I am still haveing the same issues.
Below are the steps you have referred to which I covered in my original request :-
Other steps I have taken. I used the old installation disk to do a complete uninstall of all the drivers using CCC> Utilities and Uninstall_L3 . I also deleted all the %TEMP% files (7z) that my Laptop would allow.
Then once again I I used the install wizard first wit the USB cable disconnected then the wizard asked me to plug it in. I plugged it in and HP Wizard found the printer and downloaded the appropriate software completed the download and extracted it and then NOTHING. Except the drivers were installed and the printer was shown in the devices and printers.
I have also downloaded the critical update:-
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-126392-2&cc=uk&dlc=en&lc=en...
Can you suggest a solution help. In my view I need to start from scratch and remove all traces of any HP software and drivers and start over. My only issue with this I have done this and still have the same issues. If I go to Microsoft uninstall utility there isn’t anything to uninstall.
I can print to the printer both wirelessly and via the USB port. But the Solution center will not install just keeps looping. ie idenifies the printer downloads the latest sofware and extracts it then just dissapears of the screen. Nothing comes up and there are no HP programs running in the applications task manager and no processes either.
Thank you in advance for your reply. Regards Andy

Kb2920189 fails to install on Windows 2012 R2 Essentials

Hello,
I have a 2012 R2 Essentials server that fails to install the UEFI KB2920189 update. All other updates installed fine. It's running two disks, one has 8.1 the other has 2012 R2 Esssentials in dual boot mode. No VM. I have heard reports
of successful installs of this kb2920189 update that basically bricks the OS on reboot. I would like to avoid this. The error code during the failed installation is 800F0922.
Thanks

Hi,
Based on your description, I understand that you failed to install KB2920189 with error 800F0922.
Please refer to following operations and check if can help you to solve this issue.
Refer to the KB (KB947821), and use the inbox Deployment Image Servicing and Management (DISM) tool. Then install
this update again.
Please
reset Windows Update components and monitor the result.
Please perform a
clean boot and check if you can install this update successfully.
If this issue still persists, please navigate to: %windir%\Windowsupdate.log and check the log file if can
find some more clues.
For more details, please refer to the following KB.
How to read the Windowsupdate.log file
Hope this helps.
Best regards,
Justin Gu

Fail to install Distibution Point on Windows Server 2012

I have been trying to install a distribution point via sccm 2012 on a windows 2012 server. I keep getting errors about the drive not found (distribution manager failed to verify drive specified by user on distribution point) and it won't install. It worked
on all the other servers I tried, but this one keeps giving trouble.
Does anyone have any idea as to the cause?
I put an extract of the log file here:
Get site system FQDN and account information from DB for ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:18 5848 (0x16D8)
Get site system FQDN and account information from DB for ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:19 5848 (0x16D8)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:20 5848 (0x16D8)
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\svc_scom_msaa SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:32 3724 (0x0E8C)
ConfigureDP SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:32 3724 (0x0E8C)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:44 1724 (0x06BC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:49 1724 (0x06BC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:54 1724 (0x06BC)
DP registry settings have been successfully updated on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:05 3724 (0x0E8C)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=3724 GMTDATE=di dec 31 12:57:05.905 2013 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:05 3724 (0x0E8C)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=3724 GMTDATE=di dec 31 12:57:05.905 2013 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:05 3724 (0x0E8C)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:05 3724 (0x0E8C)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:07 3724 (0x0E8C)
CDistributionManager::ConfigurePXE failed; 0x80041002 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:07 3724 (0x0E8C)
No need to initialize monitoring task on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:16 3724 (0x0E8C)
Creating, reading or updating IIS registry key for a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISSSLState in the SCF is 224. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
DP settings have been updated to HUSOWINFP01.sesvanderhave.net. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:21 3724 (0x0E8C)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 3724 (0x0E8C)
Sleep 1231 seconds... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 3724 (0x0E8C)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 5848 (0x16D8)
Found notification for package 'SES00003' SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Found notification for package 'SES00004' SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Package Thread Limit: 3 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Retry interval: 30 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
DP upgrade thread Limit: 5 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
DP upgrade retry interval: 20 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Starting package processing thread, thread ID = 0x2274 (8820) SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Starting package processing thread, thread ID = 0x9B8 (2488) SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 3724 (0x0E8C)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 3724 (0x0E8C)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=8820 GMTDATE=di dec 31 12:57:33.112 2013 ISTR0="SES00003" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
Retrying package SES00003 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
No action specified for the package SES00003. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=2488 GMTDATE=di dec 31 12:57:33.112 2013 ISTR0="SES00004" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
Retrying package SES00004 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
No action specified for the package SES00004. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Thread Handle = 00000000000031DC SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
DP thread with thread handle 00000000000031DC and thread ID 7936 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Thread Handle = 00000000000016A8 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
DP thread with thread handle 00000000000016A8 and thread ID 3404 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Package SES00003 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
The package and/or program properties for package SES00003 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00003, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
Package SES00004 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
The package and/or program properties for package SES00004 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00004, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
StoredPkgVersion (1) of package SES00003. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
SourceVersion (1) of package SES00003. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=8820 GMTDATE=di dec 31 12:57:36.247 2013 ISTR0="Configuration Manager Client Package" ISTR1="SES00003"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820
(0x2274)
Failed to process package SES00003 after 1 retries, will retry 99 more times SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
StoredPkgVersion (1) of package SES00004. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
SourceVersion (1) of package SES00004. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=2488 GMTDATE=di dec 31 12:57:36.282 2013 ISTR0="Configuration Manager Client Upgrade Package"
ISTR1="SES00004" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:36 2488 (0x09B8)
Failed to process package SES00004 after 1 retries, will retry 99 more times SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)

I uninstalled the WDS according to the information on this site: http://myitforum.com/myitforumwp/2011/11/08/configmgr-2012-no-need-to-manually-install-wds/
But it still keeps giving me errors about the disk not being valid, it does that wether I choose a disk or leave the default values.
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\svc_scom_msaa SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:33 2964 (0x0B94)
ConfigureDP SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:33 2964 (0x0B94)
Upgrading DP with ID 16777238. Thread 0x1bdc. Used 1 threads out of 5. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7492 (0x1D44)
Processing 16777238.INS SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7132 (0x1BDC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7492 (0x1D44)
DPID 16777238 - NAL Path ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ , ServerName = HUSOWINFP01.SESVANDERHAVE.NET, DPDrive = D:, IsMulticast = 0, PXE = 1, RemoveWDS = 0 SMS_DISTRIBUTION_MANAGER 6/01/2014
8:49:50 7132 (0x1BDC)
Created policy provider trigger for ID 16777238 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7692 (0x1E0C)
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\******** SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:54 7132 (0x1BDC)
Failed to find a valid drive on the distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:55 7132 (0x1BDC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:55 7492 (0x1D44)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
Failed to install DP files on the remote DP. Error code = 15 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
Drive D: is not valid. Error = 15 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
STATMSG: ID=2360 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=7132 GMTDATE=ma jan 06 07:49:56.907 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="HUSOWINFP01.SESVANDERHAVE.NET" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014
8:49:56 7132 (0x1BDC)
Will try again after 20 mins ... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
DP registry settings have been successfully updated on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=2964 GMTDATE=ma jan 06 07:49:58.295 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964
(0x0B94)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=2964 GMTDATE=ma jan 06 07:49:58.295 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964
(0x0B94)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
CDistributionManager::ConfigurePXE failed; 0x80041002 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:00 7492 (0x1D44)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:05 7492 (0x1D44)
Initialize monitoring task on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
Failed to get object class SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
ExecStaticMethod failed (80041002) SMS_DistributionPoint, RegisterDPHealthMonTask SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
Failed to register DP health monitoring task on HUSOWINFP01.sesvanderhave.net. error = 0x80041002 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
DP settings have been updated to HUSOWINFP01.sesvanderhave.net. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
Sleep 60 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
Found notification for package 'SES00003' SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Found notification for package 'SES00004' SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Package Thread Limit: 3 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Retry interval: 30 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
DP upgrade thread Limit: 5 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
DP upgrade retry interval: 20 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Starting package processing thread, thread ID = 0x12CC (4812) SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Starting package processing thread, thread ID = 0xDD8 (3544) SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 2964 (0x0B94)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 2964 (0x0B94)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=4812 GMTDATE=ma jan 06 07:50:32.429 2014 ISTR0="SES00003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
Retrying package SES00003 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
No action specified for the package SES00003. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=3544 GMTDATE=ma jan 06 07:50:32.475 2014 ISTR0="SES00004" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
Retrying package SES00004 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
No action specified for the package SES00004. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4812 (0x12CC)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 3544 (0x0DD8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Thread Handle = 0000000000002BE0 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
DP thread with thread handle 0000000000002BE0 and thread ID 8896 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Thread Handle = 0000000000002CF0 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
DP thread with thread handle 0000000000002CF0 and thread ID 4628 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Package SES00004 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
The package and/or program properties for package SES00004 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00004, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Package SES00003 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
The package and/or program properties for package SES00003 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00003, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
StoredPkgVersion (1) of package SES00004. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
SourceVersion (1) of package SES00004. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=3544 GMTDATE=ma jan 06 07:50:35.736 2014 ISTR0="Configuration Manager Client Upgrade Package" ISTR1="SES00004" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Failed to process package SES00004 after 77 retries, will retry 23 more times SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
StoredPkgVersion (1) of package SES00003. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
SourceVersion (1) of package SES00003. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=4812 GMTDATE=ma jan 06 07:50:35.829 2014 ISTR0="Configuration Manager Client Package" ISTR1="SES00003" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Failed to process package SES00003 after 77 retries, will retry 23 more times SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:36 7492 (0x1D44)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:37 2964 (0x0B94)
Sleep 1828 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:37 2964 (0x0B94)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:41 7492 (0x1D44)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:42 2964 (0x0B94)
Sleep 1823 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:42 2964 (0x0B94)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)
Sleep 1818 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)
Sleep 1818 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)

Install of CUCM 8.6.1.10000-43 on VMWare fails on installing progmeter

Hi, Everyone
First time post here, and first time installing CUCM (any version).
I built a VM using a downloaded OVA template for CUCM 6.5.1.10000-43, and the install fails with a critical stop. Once I figured out how to dump logs to the virtual serial port, and looked at the install.log, I found the following information that looks like where the install failed (these are the only LVL::Error and LVL::Critical messages in the log).
It looks like install failed to install the progmeter application component.
Does anyone know what this app does? Any ideas on why it might have failed to install and possible workaround?
I may already have the answer to the question, as I'm attempting install on a VM running on VMWare vServer (rather than ESX/ESXi/vSphere). It is possible that simply being on an unsupported configuration is my problem. I'm trying to work with the equipment immediately available to me, but fully understand that I may have set myself up for failure by even attempting this.
Any help is appreciated greatly.
Regards,
Sean C
INSTALL LOG SNIPPET
08/17/2011 17:51:51 component_install|File:/opt/cisco/install/bin/component_install:743, Function: exec_progmeter(), /opt/cisco/install/bin/progmeter failed (1)|<LVL::Error>
08/17/2011 17:51:51 appmanager.sh|Internal Error, File:/usr/local/bin/base_scripts/appmanager.sh:155, Function: install(), failed to install application components|<LVL::Critical>
08/17/2011 17:51:51 post_install|File:/opt/cisco/install/bin/post_install:869, Function: install_applications(), /usr/local/bin/base_scripts/appmanager.sh -install failed (1)|<LVL::Error>
08/17/2011 17:51:51 post_install|Exiting with result 1|<LVL::Info>
08/17/2011 17:51:51 post_install|INSTALL_TYPE="Basic Install"|<LVL::Debug>
08/17/2011 17:51:51 post_install|File:/opt/cisco/install/bin/post_install:570, Function: check_for_critical_error(), check_for_critical_error, found /common/log/install/critical.log, exiting|<LVL::Error>
08/17/2011 17:51:52 post_install|(CAPTURE) Mail notification cancelled - smtp server address for email not found! [/usr/local/platform/conf/platformConfig.xml]|<LVL::Debug>
08/17/2011 17:51:52 display_screen|Arguments: "Critical Error" "The installation has encountered a unrecoverable internal error. For further assistance report the following information to your support provider.
"/opt/cisco/install/callmanager/scripts/cm_msa_post.sh install PostInstall 8.6.1.10000-43 8.6.1.10000-43 /usr/local/cm/ /usr/local/cm/ /common/log/install/capture.txt " terminated. Exceeded max time (360)
The system will now halt.
Continuing will allow you to dump diagnostic information before halting." "Continue"|<LVL::Debug>

Hi,
Has anyone found a fix for this?
I am trying to run call manager 8.6.1 on the following enviroment
VMware ESXI 4.1
4GB of RAM
80 GB HDD Space
I have allocated the VM one CPU
In regards to vsergeyey reponse I have checked the network adapter and this is flexible.
I have run the OVA template firstly before mounting the image
I have tried installing numerous times.
Each and every time near the "Installing Database Component" I get the following error;

EA4500 Firmware Ver: 2.1.38.138880 fails to install

Similar Messages

Maybe you are looking for