EA4500 on Sniper Hill ISP is not working so far, any ideas??

Hello everybody, I am deployed to Afghanistan. The ISP provided on the base is called Sniper Hill. The basic setup is there are CAT5e drops in every room. You plug in, and it is all web based to pay for and sign in to the service. Other people have successfully connected there routers made by other manufacturers, why won't the EA4500 connect? I've tried a lot of different ideas from reading different stuff round the net including the forums here. The Problem starts when after I sign in. When I open explorer I get the normal redirect to the sign in page. Once I sign in it's like the connection dies. I've seen a lot of suggestions that the server is picking up on a router on their network and blocks everything. I've tried mac addy clone, fixed IP, DMZ, NAT off, using the different connection types versus plain old Dynamic IP. Anyone got any ideas? The only thing I can tell you about the other routers people are using is they are a European version, you can tell by the plug that comes on them. I don't want to have to buy another router to use here. I'll keep this one and use it at home for sure but I'd like to use it here. Thanx

Correct me if I'm wrong, you've tried to set up the router using the CD that came w/it right? If that did not work then please try to set the router manually. Click the link below to check on how to install the router manually. http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22734

Similar Messages

After Mountain Lion download, FaceTime is not working anymore. Any ideas?

After Mountain Lion download, FaceTime is not working anymore. Any ideas?

I have reinstalled mountain Lion again . This time, Facetime works when somebody calls me, and I can do calls from my Mac again. But the problem was still that I was not able to call my iPad, what I was able to do with Lion (I had one Apple-ID and two call adresses). The solution was this time to generate a second Apple-ID from the Facetime in my Mac (this doesn't affect your main Apple-ID, it's only used for Facetime). Now, it works! ;-)

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Updated to IOS 7.2 this morning, now when I type, there is a long lag time. Phone been turned off and on, and still not working properly. Any ideas?

I updated to 7.02 this morning, and now when I go to use the keyboard, it does not respond. Then all of a sudden after a few seconds, all the typing shows. Made it very hard to put in the password, and now texts are VERY frustrating as I can not even use the backspace button.
Any ideas?

OK - I just found this and it seemed to work.
http://www.gottabemobile.com/2013/09/19/fix-keyboard-lag-ios-7-iphone-4s/
Apple needs to fix this bug - really annoying!

I just buy an iPhoto 11 version and it's not working. No import to library, no open, no slideshow, nothing.... Quit unexpected. Simply NOT working guys. :-( Any ideas? Tnx

Hi Guys
I just buy from Apple Store a iPhoto 11 version and it's not working.
No import, no open, no slideshow, nothing... It's frozen!!! Quit unexpected.... Simply not working!
Any ideas? Tnx.

What happens when you try? More information gets you better help...

HT201210 Re ISO 7.1 update. My hsbc fast balance app is not working now. Any ideas?

Updated my iphne 4s to ISO 7.1 and now my HSBC fast balance app is not working.... any ideas?

Still a problem. After activating app it was okay, but then when trying to log in using normal procedure again it's the same old problem...

Shuffle (2nd Gen) not been used for a few years - not working at all - any ideas?

My Ipod Shuffle (2nd Gen) has not been used for a long time and now will not give any reponse at all. It won't charge and it is not recognised by ITunes - is there anything I should do?

Sorry... I did not notice your reply.
The initial blinking is good. That means there is a connection between shuffle and computer. But it should continue blinking or become a solid color (ON but not blinking).
It could be a problem with the battery. If a lithium battery is left completely drained for an extended period, it can become unable to hold a charge. However, it could also be a problem with the USB port (such as not enough available power or a USB device conflict). As a test, you should try shutting down the computer and disconnecting all USB devices, including any hub, except for standard keyboard and mouse (if normally used). If your computer is a laptop, connect its power adapter (so that it's not running on battery power). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on computer.

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I am struggling to connect my macbook pro to a wireless network. Works fine with USB and my Toshiba can print wirelessly but not the MAC. Any ideas?

Hi
I cant print wirelessly on my Mac pro but can via usb. the Toshiba does work wirelessly..any ideas?

If you can use the wireless network properly (surf the web, check email, etc.) then there is probably nothing wrong with your network settings.
When you print from your Mac Pro, does the printer show up in the Printer list at all (in the Print dialog box)?
If not, have you already tried to Add Printer from the bottom of the Printer list?
If you click Add Printer and it can't see the printer, the next thing to do is probably go to the Toshiba printer web site and see if there is a Mac printer driver to download and install so that it shows up in the Printer list.

I've just changed from a PC to a mac and have a large number of downloaded WMA music files (not i-tunes purchases) which I just can't get into my i-tunes library. File converters don't seem to work either. Any ideas?

I've just changed from a PC to a mac and have a large number of downloaded WMA music files which I can't get into i-tunes. When the library was in Windows, i-tunes would convert the files automatically, but this doesn't happen now. I've downloaded a couple of file converters, but these don't seem to work either. Any ideas?

iTunes for Windows (but not iTunes for Mac) can import and convert unprotected WMA tracks. If the tracks are protected by DRM (Digital Rights Management) then it will not accept them.
One option would be to install iTunes on your PC, do the conversion, and then transfer the converted tracks from iTunes on your PC to iTunes on your Mac.

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

I bought an unlocked iphone 4s from dubai but it does not work with an indian idea sim..help

i bought an unlocked iphone 4s from dubai but it does not work with an indian idea sim..help

If you are both on the T-mobile network, the sim card should work. If you did a Erase All Content and Settings, then she should be at the point of activation as a new device...talk to T-mobile and be sure the sim she is using is a valid sim card.

I have an ipad 2, 16GB 3G WiFi, black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?

I have an ipad 2, 16GB 3G WiFi, worked perfectly, but now black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore from recovery mode, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?
I have tried multiple laptops with both units, re-installed Itunes, same error message on one of the units but ok on the other. Thinking I have a defective Ipad 2, any ideas on what to do is greatly appreciated.

Tried Google? iPad error 1600

When trying to open itunes i'm receiving a message stating "this folder is on a locked disk or you do not have write permissions" Any idea what I need to do to get it working. The issue happened after I installed DJ Software

When trying to open itunes i'm receiving a message stating "this folder is on a locked disk or you do not have write permissions" Any idea what I need to do to get it working. The issue happened after I installed DJ Software

Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

ITunes recognizes my device but the device does not show up for me to work with. Any idea where I go to access to device in iTunes. Going to File/Device is greyed out.

iTunes recognizes my device but the device does not show up for me to work with. Any idea where I go to access to device in iTunes. Going to File/Device is greyed out.

I think this article will help you.

EA4500 on Sniper Hill ISP is not working so far, any ideas??

Similar Messages

Maybe you are looking for