EA4500 - poor parental access controls.
What's great about it: Easy to setup. Fast. Good range.
What's not so great: Parental controls are limited to the point of being useless for my needs.
I love this router but it's going back. The parental access controls are extremely limited. Limited to the point of being useless IMO. For instance, I can't restrict access to Tues - Friday 3:00PM - 8:00PM. The router also predefines weekends and school days and you are limited to a time limit that begins in PM and ends in AM. Your defined end time must be after midnight because you are limited to an AM ending time. The router defines weekends as Saturday - Sunday. What about holiday weekends? No way to account for that in the access controls. It's very limiting and frustrating for a high dollar router. If you don't have use for access controls, it's a great router.
This product has...
Fast connection
Secure connection
Easy to set up
Reliable connection
No, I would not recommend this to a friend.
I use it in...:Small home
I have to agree. I set this up on Friday, gave it the weekend to run and see how it works. Tonight I read pages upon pages about how to get the parental controls to work -the number one reason I bought this one. I watched my son using skype, minecraft, facebook and youtube right under my nose while I reset and reset and reset the parental controls to block those sites on his PC.
The cloud is not there. Apps? What apps? Misleading. There is a Droid app that is almost useless as it has no parental control. And the setting for limiting access? Give me a break. Who designed that data set, a kid?
It was presented as if this device would have apps to be able to customize the operation. That would be good. Where are the apps?
Its going back by Wednesday just because I have already sold my old DGL-4300 and now I have to get another router. NetGear here I come again. Oh, please please please spare me the posting of two links to how to set up the parental controls with the web interface or Cisco Connect. The issue is NOT that I don't know how to use the feature. The issue is the feature is sufficiently lacking in scope and options. It sucks.
Similar Messages
-
Linksys ea4500 with parental control , policy , enhancement
i have EA4500 and parental control features are very limited which are very disappointing
Following features are required
in websites block there should be "websites allowed only" so i can allow 7-8 websites only to my kids to view
Keywords filtering should be available or if i may able to apply a policy for family filter like stuff
It should have domain blocking as i have to block www.youtube.com but they can open m.youtube.com and i have limitation of 8 sites only???????
The Netproofer app is bugy and doesnt help perfectly and it should either be decleared as beta and should not associated with linksys otherwise should be inproved for required level of purpose
Is there any solution or should I go to other brands ????The EA4500 and the rest of the Linksys Smart Wifi routers have a streamlined Parental Controls feature. It allows time- based restriction and website blocking per device. This feature solely restricts access and does not have the option to permit certain devices to have access to the internet (during specific times) or selected websites.
If Netproofer does quite work as it should, you can install and reinstall the app. If you're still having issues, contact the app developer. -
My kids have figured a workaround for the internet access control
I was quite happy with Network Magic until my kids rendered it fairly ineffective by a simple workaround. The internet access control seems to be tied into each PC's clock. So, my kids simply change the time on the computer and ... Voila! Internet access whenever the parents aren't around. I was kind of hoping the internet access schedule would be linked to the time on the router. I'm hoping this can be fixed.
Message Edited by molsoncdn on 12-13-2009 06:58 PMHi, set your kids user accounts to not be admins, and set the BIOS password, this will migate that workaround.
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users. -
Hi.
Is it possible to keep track of the quantity of internet content received(in bytes) on a client machine?
How does the proxy server allow or disallow internet access to a subset of clients (or one client) in the LAN to which it is connected.
Thanksmiraglia wrote:
I am using Network Magic version 5.5.9195.0-Pure0, platform version 11.2.9195.1 on a couple of Windows 7 laptops and I am finding when I set the Internet Access Control to "Prevent" that some websites like the www.yahoo.com and www.google.com can be still be accessed. I thought "Prevent" was supposed to completely turn off internet access? I also have BitDefender installed on these laptops for anti-virus and firewall and it includes parental controls, also, which I currently have set to always on for internet. Is BitDefender conflicting with Network Magic? Is there a way to get them to work together? I want to be able to turn off the internet so my kids can't get on whenever they want to. Thanks.
This won’t work anymore since HND is obsolete and I believed it is not actively maintained anymore. http://homecommunity.cisco.com/t5/Home-Network-Defender/Is-Home-Network-Defender-still-supported/td-... -
Doubt in access control mechanisms.
Hi all,
I have a very basic doubt in access control mechansim.
Why in Java a class is not allowed to be declared as a private class?
Is there any specific reason other than that all the methods and data will become unavailable?
Thanks in advance!Object oriented world is similar to the real world. Lets say there an apple which is not accessble to any one, than what is the use of having the apple in this world.
Similar to this, private class is of no use.
But you can create inner class as private class, as this class is accessble to the parent class. -
Create user menus in hierarical tree with access control
Hi All,
I am facing problem in populating user menus in hirarical against user access control.
I have table of menus in which i populate data as:
Menu
- Sub Menu 1
-- Form 1
-- Form 2
-- Form 3
- Sub Menu 2
-- Form 4
-- Form 5
-- Form 6
Now I have created hierarical query as:
SELECT -1, LEVEL, menu_name, NULL, id
FROM menu_opt
START WITH parent_id IS NULL
CONNECT BY PRIOR menu_id = parent_id
and menu_id in
(3, 4);
Note: where menu_id 3 = Form 1, Menu_id 4 = Form 2.
If I allow only menu ID 3 and 4 (not parents menus) then Hierarchy should be completed from top to bottom. What change i have to made to achieve my target?
Thankx
Qasim JavaidHi,
Sorry, it's very unclear what you want to do.
Whenever you have a problem, please post CREATE TABLE and INSERT statements for a little sample data, and the results you want from that sample data.
Say which version of Oracle you're using, e.g. 11.2.0.2.0. This is always important, but especially so with CONNECT BY queries, because every version since Oracle 7 has had significant improvements in this area.
See the forum FAQ {message:id=9360002}
If you can show the problem using commonly available tables (such as scott.emp or hr.employees, both of which contain trees) then you don't need to post any sample data; just the results you want and an explanation of how you get those results.
For example, I think you're asking something like this:
"I want to show the hierarchy in scott.emp, but I only want to show certain nodes and their descendants. For example, if I ask for 'MILLER' and 'SCOTT', I would want to see
{code}
` EMPNO ENAME
7876 ADAMS
7788 SCOTT
7934 MILLER
{code}
(order doesn't matter). ADAMS is included because ADAMS is a child of SCOTT."
Here's one way to do that:
SELECT DISTINCT
empno, ename
FROM scott.emp
START WITH ename IN ('MILLER', 'SCOTT')
CONNECT BY mgr = PRIOR empno
;This query should work in any version of Oracle. -
Airport time access control not working for iPhones-
Hi,
I use a 3rd generation Airport Extreme base for my WiFi hme network.
For parental control, I'd like to allow one iPhone and iMac to be connected only for some hours of the day.
So I have activated the timed access control and entered the relevant MAC addresses and the time to be connected.
It seems that the iMac is well restricted as it should, but the iPhone has no limitation…
Why is it not effective for the iPhone ? The iPhone MAC address (Wi-Fi Address) doen't work in this case ?
(I have Lion up to date)
Thanks for your help
EricSorry, my fault:
I wrote the Bluetooth adress instead of the WiFi address…
It works perfectly now for me -
The access controls in the HH5 allow restrictions on a time basis - is there any way of setting different time limits on different days? Eg I want to restrict access on school days but be less constrained during the weekend. I have had other routers in the past that allow me to do this but HH5 does not appear to be as flexible. Comments appreciated.
If you are happy to apply restrictions to all devices, so they cannot access sites that would interfere with homework, then the new BT parental controls may be a better option.
You can set the time period when these restrictions would apply.
http://bt.custhelp.com/app/hub/c/346,6679
These are network based, so all devices including phones and tablets will be affected.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Error GRC Access Control 10.0
We have a problem when execute the next steps in GRC Access Control 10.0
SPRO-->Governance, Risk and Compliance>Access Control--> Access Risk Analysis--> Batch RisK Analysis
We applied the next note, but problem is the same.
1563583 - SYSTEM_NO_TASK_STORAGE dump on AIX
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_GRRM_DASHBOARD_MENU_AUTH===CP
Application Component GRC-RM
Date and Time
13.03.2013 11:50:04
|Short text
|
|
The ASSERT condition was violated.
|
|What happened?
|
|
In the running application program, the ASSERT statement recognized a
|
|
situation that should not have occurred.
|
|
The runtime error was triggered for one of these reasons:
|
|
- For the checkpoint group specified with the ASSERT statement, the
|
|
activation mode is set to "abort".
|
|
- Via a system variant, the activation mode is globally set to "abort"
|
|
for checkpoint groups in this system.
|
|
- The activation mode is set to "abort" on program level.
|
|
- The ASSERT statement is not assigned to any checkpoint group.
|
|What can you do?
|
|
Note down which actions and inputs caused the error.
|
|
|
|
|
|
To process the problem further, contact you SAP system
|
|
administrator.
|
|
|
|
Using Transaction ST22 for ABAP Dump Analysis, you can look
|
|
at and manage termination messages, and you can also
|
|
keep them for a long time.
|
|Error analysis
|
|
The following checkpoint group was used: "No checkpoint group specified"
|
|
|
|
If in the ASSERT statement the addition FIELDS was used, you can find
|
|
the content of the first 8 specified fields in the following overview:
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|How to correct the error
|
|
Probably the only way to eliminate the error is to correct the program.
|
|
|
|
|
|
If the error occures in a non-modified SAP program, you may be able to
|
|
find an interim solution in an SAP Note.
|
|
If you have access to SAP Notes, carry out a search with the following
|
|
keywords:
|
|
|
|
"ASSERTION_FAILED" " "
|
|
"CL_GRRM_DASHBOARD_MENU_AUTH===CP" or "CL_GRRM_DASHBOARD_MENU_AUTH===CM001"
|
|
"IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED"
|
|
|
|
If you cannot solve the problem yourself and want to send an error
|
|
notification to SAP, include the following information:
|
|
|
|
1. The description of the current problem (short dump)
|
|
|
|
To save the description, choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
2. Corresponding system log
|
|
|
|
Display the system log by calling transaction SM21.
|
|
Restrict the time interval to 10 minutes before and five minutes
|
|
after the short dump. Then choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
3. If the problem occurs in a problem of your own or a modified SAP
|
|
program: The source code of the program
|
|
In the editor, choose "Utilities->More
|
|
Utilities->Upload/Download->Download".
|
|
|
|
4. Details about the conditions under which the error occurred or which
|
|
actions and input led to the error.
|
|
|
|
|
|System environment
|
|
SAP Release..... 702
|
|
SAP Basis Level. 0012
|
|
|
|
Application server... "KIO13701"
|
|
Network address...... "172.20.1.137"
|
|
Operating system..... "AIX"
|
|
Release.............. "7.1"
|
|
Hardware type........ "00F6C78E4C00"
|
|
Character length.... 16 Bits
|
|
Pointer length....... 64 Bits
|
|
Work process number.. 10
|
|
Shortdump setting.... "full"
|
|
|
|
Database server... "KIO13701"
|
|
Database type..... "DB6"
|
|
Database name..... "DGR"
|
|
Database user ID.. "SAPDGR"
|
|
|
|
Terminal.......... "192.168.0.5"
|
|
|
|
Char.set.... "C"
|
|
|
|
SAP kernel....... 720
|
|
created (date)... "Jul 8 2012 19:43:01"
|
|
create on........ "AIX 2 5 00092901D600"
|
|
Database version. "DB6_81 "
|
|
|
|
Patch level. 300
|
|
Patch text.. " "
|
|
|
|
Database............. "DB6 08.02.*, DB6 09.*, DB6 10.*"
|
|
SAP database version. 720
|
|
Operating system..... "AIX 2 5, AIX 3 5, AIX 1 6, AIX 1 7"
|
|
|
|
Memory consumption
|
|
Roll.... 0
|
|
EM...... 8379584
|
|
Heap.... 0
|
|
Page.... 16384
|
|
MM Used. 6205712
|
|
MM Free. 2170976
|
|User and Transaction
|
|
Client.............. 100
|
|
User................ "LVELASCO"
|
|
Language key........ "E"
|
|
Transaction......... " "
|
|
Transaction ID...... "51400164B1F00C40E1008000AC140189"
|
|
|
|
EPP Whole Context ID.... "5140015EB1F00C40E1008000AC140189"
|
|
EPP Connection ID....... "5140F9B0B19C1150E1008000AC140189"
|
|
EPP Caller Counter...... 1
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
Debugger Active..... "none"
|
|Server-Side Connection Information
|
|
Information on Caller of "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource ID. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
|
|
Information on Caller ofr "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource Id. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|Information on where terminated
|
|
Termination occurred in the ABAP program "CL_GRRM_DASHBOARD_MENU_AUTH===CP" -
|
|
in "IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED".
|
|
The main program was "SAPMHTTP ".
|
|
|
|
In the source code you have the termination point in line 59
|
|
of the (Include) program "CL_GRRM_DASHBOARD_MENU_AUTH===CM001".
|
|Source Code Extract (Source code has changed)
|
|Line |SourceCde
|
| 29|
lv_dashboard = lv_value.
|
| 30|
|
| 31|
TRANSLATE lv_dashboard TO UPPER CASE.
|
| 32|
|
| 33|
CASE lv_dashboard.
|
| 34|
WHEN 'HEATMAP'.
|
| 35|
lv_report = 'GRRM_HEATMAP'.
|
| 36|
|
| 37|
WHEN 'LOSS_OVERVIEW' OR 'LOSS_STRUCTURE' OR 'OB_LOSS_OVERVIEW' OR 'OB_LOSS_STRUCTU|
| 38|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
| 39|
|
| 40|
WHEN 'OVERVIEW'.
|
| 41|
lv_report = 'GRRM_OVERVIEW'.
|
| 42|
|
| 43|
WHEN OTHERS.
|
| 44|
ASSERT 1 = 2.
|
| 45|
|
| 46|
ENDCASE.
|
| 47|
|
| 48|
EXIT.
|
| 49|
|
| 50|
ENDLOOP.
|
| 51|
|
| 52|
WHEN 'GRRM_LOSS_MATRIX' OR 'GRRM_LOSS_MATRIX_NEW'.
|
| 53|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
| 54|
|
| 55|
WHEN 'GRRM_HEATMAP_REPORT'.
|
| 56|
lv_report = 'GRRM_HEATMAP'.
|
| 57|
|
| 58|
WHEN OTHERS.
|
|>>>>>|
ASSERT 1 = 2.
|
| 60|
|
| 61| ENDCASE.
|
| 62|
|
| 63| TRY.
|
| 64|
lv_regulation_id = cl_grfn_api_regulation=>if_grfn_api_regulation~get_regulation_id( i|
| 65|
|
| 66|
ev_authorized = cl_grfn_util_rep_auth=>has_rep_auth(
|
| 67|
io_session
= io_session
|
| 68|
iv_regulation_id = lv_regulation_id
|
| 69|
iv_report
= lv_report
|
| 70|
iv_activity
= grfn0_c_activity-print
|
| 71|
|
| 72|
|
| 73|
CATCH cx_grfn_exception.
|
| 74|
ev_authorized = abap_false.
|
| 75|
|
| 76| ENDTRY.
|
| 77|
|
| 78|ENDMETHOD.
|
|Contents of system fields
|
|Name
|Val.
|
|SY-SUBRC|4
|
|SY-INDEX|2
|
|SY-TABIX|1
|
|SY-DBCNT|1
|
|SY-FDPOS|0
|
|SY-LSIND|0
|
|SY-PAGNO|0
|
|SY-LINNO|1
|
|SY-COLNO|1
|
|SY-PFKEY|
|
|SY-UCOMM|
|
|SY-TITLE|HTTP Control
|
|SY-MSGTY|
|
|SY-MSGID|
|
|SY-MSGNO|000
|
|SY-MSGV1|
|
|SY-MSGV2|
|
|SY-MSGV3|
|
|SY-MSGV4|
|
|SY-MODNO|0
|
|SY-DATUM|20130313
|
|SY-UZEIT|115004
|
|SY-XPROG|SAPCNVE
|
|SY-XFORM|CONVERSION_EXIT
|
|Active Calls/Events
|
|No. Ty.
Program
Include
Line |
|
Name
|
| 34 METHOD
CL_GRRM_DASHBOARD_MENU_AUTH===CP
CL_GRRM_DASHBOARD_MENU_AUTH===CM001
59 |
|
CL_GRRM_DASHBOARD_MENU_AUTH=>IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED
|
| 33 METHOD
CL_GRFN_API_MENU_ITEM_ELA=====CP
CL_GRFN_API_MENU_ITEM_ELA=====CM001 126 |
|
CL_GRFN_API_MENU_ITEM_ELA=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
| 32 METHOD
CL_GRFN_API_MENU==============CP
CL_GRFN_API_MENU==============CM003
34 |
|
CL_GRFN_API_MENU=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
| 31 METHOD
CL_GRFN_LAUNCHPAD_UIBB========CP
CL_GRFN_LAUNCHPAD_UIBB========CM006
60 |
|
CL_GRFN_LAUNCHPAD_UIBB=>IF_FPM_GUIBB_LAUNCHPAD~MODIFY
|
| 30 METHOD
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CP
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CM001
76 |
|
CL_FPM_LAUNCHPAD_UIBB_ASSIST=>INIT_FEEDER
|
| 29 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
410 |
|
CL_COMPONENTCONTROLLER_CTR=>WDDOINIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
| 28 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
181 |
|
CLF_COMPONENTCONTROLLER_CTR=>IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
| 27 METHOD
CL_WDR_DELEGATING_COMPONENT===CP
CL_WDR_DELEGATING_COMPONENT===CM004
9 |
|
CL_WDR_DELEGATING_COMPONENT=>DO_INIT
|
| 26 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM00V
3 |
|
CL_WDR_CONTROLLER=>INIT_CONTROLLER
|
| 25 METHOD
CL_WDR_COMPONENT==============CP
CL_WDR_COMPONENT==============CM019
24 |
|
CL_WDR_COMPONENT=>INIT_CONTROLLER
|
| 24 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM002
7 |
|
CL_WDR_CONTROLLER=>INIT
|
| 23 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00E
24 |
|
CL_WDR_CLIENT_COMPONENT=>INIT
|
| 22 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00A
42 |
|
CL_WDR_CLIENT_COMPONENT=>IF_WDR_COMPONENT_FACTORY~CREATE_COMPONENT
|
| 21 METHOD
CL_WDR_COMPONENT_USAGE========CP
CL_WDR_COMPONENT_USAGE========CM009
67 |
|
CL_WDR_COMPONENT_USAGE=>IF_WD_COMPONENT_USAGE~CREATE_COMPONENT
|
| 20 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM003
81 |
|
CL_FPM_COMPONENT_MANAGER=>ADD_COMPONENT
|
| 19 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM004
19 |
|
CL_FPM_COMPONENT_MANAGER=>ATTACH_COMPONENT_TO_USAGE
|
| 18 METHOD
CL_FPM========================CP
CL_FPM========================CM005
89 |
|
CL_FPM=>PROCESS_EVENT
|
| 17 METHOD
CL_FPM========================CP
CL_FPM========================CM00C
34 |
|
CL_FPM=>RUN_EVENT_LOOP
|
| 16 METHOD
CL_FPM========================CP
CL_FPM========================CM002
5 |
|
CL_FPM=>IF_FPM~RAISE_EVENT
|
| 15 METHOD
CL_FPM========================CP
CL_FPM========================CM003
11 |
|Hi Alberto,
The below Notes should resolve!
1428775
1744179
Hope this helps,
Luciana -
How to allow multiple domains under Access-Control-Allow-Origin
Hi,
We have a domain where will get CORS request from another domain hosted on seperate DC. We can't set
Access-Control-Allow-Origin as * due to security concerns & IIS can't take more than 1 value at a time. Kindly suggest how to pass multiple httpheader for
Access-Control-Allow-Origin.
Regards,
DhirajHello Dhiraj,
This is not the suitable forum for your question, you may post in
IIS forums for more help.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
WRT 120 Internet Access Control Problem for itouch
I've just set up my router. Cannot seem to control access to the internet for my son's itouch. The router recognizes it on the map as a wireless device part of the network, but it will not show up in the menu that allows for internet access control. My lap top shows up, but no itouch. I'm running Windows XP home premium edition - not sure if this makes a difference.
Open the linksys setup page...Under the Wireless tab,Change the Channel Width to 20MHz only,Channel to 11 and click on save settings...Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
On the I-Touch..Go to Settings>>>General>>>Reset>>>Now select Reset Network Settings.This will now reboot and restore you network connections. -
Time Capsule Access Control and Extended Network Question
I have a Time Capsule where I have set up a wireless network access list…and extended the network using an Airport Express unit. The Airport Express unit also has settings for an Access Control list. Do these need to be the same as the those for the network from TC that it is extending…or does that happen automatically…and if not what on earth are they for?
Thanks for any help…this doesn't seem clear from what I've read/seen.
JamesI have a Time Capsule where I have set up a wireless network access list…and extended the network using an Airport Express unit. The Airport Express unit also has settings for an Access Control list. Do these need to be the same as the those for the network from TC that it is extending…or does that happen automatically…and if not what on earth are they for?
Unfortunately, they are not automatically applied to each base station in an extended network. You would have to manually enter the exact same list in each base station. -
How do I set up timed access control for a time past midnight
I would like to set up timed access control for a number of my devices that would stretch past midnight... An open network from 6AM to 2AM - effectively only blocking access from 2AM tp 6AM in the morning....
Any notion on how to do this? the timed factily does not like the setting to enable 6A to 2A, says the times are invalid.
Setting up timed access from 6AM to 11:59P, then doing another from 12A to 2A causes a service "hiccup" of 1 Minute.Set up each device as follows:
Everyday........Between.......6:00 AM and 11:59 PM
Add a second rule for each device that will state....
Everyday.....Between.......12:00 AM and 2:00 AM
You might think that there would be a one minute break between 11:59 PM and 12:00 AM, but that will not be the case, at least on every AirPort that I have ever programmed.. Reason.....11:59 is really 11:59:59:59 turning off at 12:00 AM. But, you have a second rule to allow access at 12:00 AM, so the AirPort will be "on" at the same time the first rule ends, so there will be no break.
If you really want the second rule to turn the AirPort "off" at 2:00 AM.......then set that time for 1:59 AM. If you set the rule for 2:00 AM, then AirPort will really turn off at 2:01 AM. -
To run OHS at port 80 using solaris role based access control
Hi.
I already know & have done setuid root to ohs/bin/.apachectl to allow ohs to listen to port 80. Now on a new OFM 11.1.1.4 install, I want to use Solaris Role Based Access Control (RBAC) instead. Is it possible? RBAC does work as I can run a home built apache2 httpd at port 80 withOUT suid root.
On Solaris 10, I enabled oracle uid to run process below port 1024 using RBAC
/etc/user_attr:
oracle::::type=normal;defaultpriv=basic,net_privaddr
Change OHS httpd.conf Listen from port 8888 to port 80.
However, opmnctl startproc process-type=OHS
failed as below with nothing showing in the diag logs:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=truffle:6701
0 of 1 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=187636255,pid=25563)
failed to start a managed process after the maximum retry limit
Thx,
KenJust to add my two cents here.
The commando used on Solaris to assign the right privilege to bind TCP ports < 1024 is:
# usermod -K defaultpriv=basic,*net_privaddr* <your_user_name>
Restart the opmnctl daemond.
After that OHS/Apache user can bind to lower TCP ports.
Regards.
Edited by: Tuelho on Oct 9, 2012 6:05 AM -
Hello,
I'm attempting to get a SharePoint 2013 Provider Hosted Application working in a brand new SharePoint environment. I've created snapshots of both my dev and the sharepoint environments along the way and have meticulously documented every step of the
way. I've followed these instructions (among many other resources found along this journey) :
http://msdn.microsoft.com/en-us/library/fp179923(office.15).aspx
http://technet.microsoft.com/en-us/library/fp161236(office.15).aspx
http://msdn.microsoft.com/library/office/fp179901%28v=office.15%29
Upon package and publish of my application to SharePoint, I get a 401 Unauthorized error. I use Fiddler to obtain the SPErrorCorrelationID to ultimately obtain the following ULS Viewer Output. Please explain how to fix if you're able.
Please Note: I was under the impression that a Provider Hosted Application does not use the Azure Access Control service, so I'm confused as to why my system is attempting to make this connection?
Also Note: I've used a self signed and godday obtained certificate to successfully f5 debug my basic web.title (out of the visual studio 2012 box) sharepoint provider hosted application... so I know my certs are good.
Here's my ULS output:
03/24/2014 08:54:47.83 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://portal.cltenet.com/_layouts/15/appredirect.aspx?instance_id=22d5252f%2D392c%2D4f68%2Db820%2Da3053b9d4f24)
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.83 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request.
IsAuthenticated=True, UserIdentityName=0#.w|cltenet\sp.apps, ClaimsCount=25 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.83 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.84 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Deployment acjjg Medium The current user has System.Threading.Thread.CurrentPrincipal.Identity.Name
= 0#.w|cltenet\sp.apps, System.Security.Principal.WindowsIdentity.GetCurrent().Name = NT AUTHORITY\IUSR, System.Web.HttpContext.Current.User.Identity.Name = 0#.w|cltenet\sp.apps. 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.84 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Auth ajsrv Medium redirectLaunUrl after getting it from query
string, web or app instance: https://hightrust31.cltenetapps.com/Pages/Default.aspx?{StandardTokens} 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation General aib0n High trying to get app tokens for site: 888b71f7-51ee-40f5-8344-8de4869d37d0
Unable to load app tokens from appInstanceId: 22d5252f-392c-4f68-b820-a3053b9d4f24 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Auth ajsrw Medium redirectLaunUrl after getting token replacement:
https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fportal%2Ecltenet%2Ecom&SPLanguage=en%2DUS&SPClientTag=0&SPProductNumber=15%2E0%2E4420%2E1017 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Auth ajsry Medium m_oauthAppId after NormalizeAppIdentifier()
i:0i.t|ms.sp.ext|[email protected]8df36d5d. Now getting app principal info. 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Auth ajsr0 Medium decided that we need to do a POST to the
app. 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Auth ajsr1 Medium m_redirectMessage: EndpointAuthorityMatches
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Auth ajsr2 Medium realm matched attempting to get app token
using GetAccessToken() 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Auth advzm High Error when get token for app i:0i.t|ms.sp.ext|[email protected]8df36d5d,
exception: Microsoft.SharePoint.SPException: The Azure Access Control service is unavailable. at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)
at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext
userIdentityContext, String applicationId, Uri applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue) at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken) 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Auth ajsr3 High App token requested from appredirect.aspx
for site: 888b71f7-51ee-40f5-8344-8de4869d37d0 but there was an error in generating it. This may be a case when we do not need a token or when the app principal was not properly set up. LaunchUrl:https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http://portal.cltenet.com&SPLanguage=en-US&SPClientTag=0&SPProductNumber=15.0.4420.1017
Exception Message:The Azure Access Control service is unavailable. Stacktrace: at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)
at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext
userIdentityContext, String applicationId, Uri applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue) at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken) at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenFromThreadIdentityOrUserToken(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPApplicationContextAccessTokenType tokenType, SPAppPrincipalInfo appPrincipal, Boolean useThreadIdentity, SPUserToken userToken) at Microsoft.SharePoint.ApplicationPages.AppRedirectPage.ValidateAndProcessRequest().
Since this is a nonfatal error, it will be sanitized and posted to the app as part of the app launch. 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException:
The Azure Access Control service is unavailable. at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext) at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext
serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext userIdentityContext, String applicationId, Uri
applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue) at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext serviceContext,
String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken) at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenFromThreadIdentityOrUserToken(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPApplicationContextAccessTokenType tokenType, SPAppPrincipalInfo appPrincipal, Boolean useThreadIdentity, SPUserToken userToken) at Microsoft.SharePoint.ApplicationPages.AppRedirectPage.ValidateAndProcessRequest()
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation App Auth aib0p Medium Doing appredirect from appredirect.aspx:
in site: 888b71f7-51ee-40f5-8344-8de4869d37d0 with RedirectLaunchUrl: https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fportal%2Ecltenet%2Ecom&SPLanguage=en%2DUS&SPClientTag=0&SPProductNumber=15%2E0%2E4420%2E1017
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85 w3wp.exe (0x1448) 0x22D8 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://portal.cltenet.com/_layouts/15/appredirect.aspx?instance_id=22d5252f%2D392c%2D4f68%2Db820%2Da3053b9d4f24)).
Execution Time=26.5933938531294 306c809c-66a1-d0d5-d8e2-89d3631ce1bf
Your help is very much appreciated.
With Respect,
LarryYes, actually - I was able to resolve it.
However I don't know how, unfortunately. I suspect it was because I needed to have the names of the certificates, defined during the certificate registration (to sharepoint) process, different.
I have a complete document that shows step by step instructions on the exact process I took to complete the provider hosted application creation, deployment and publishing. It was a daunting task, but I finished it successfully.
If there's a way to send private message on this forum, please do so and I'll respond with a way to obtain my document.
NOTE: I'm not all impressed with the way this forum works. This is supposed to be a Microsoft resource and I'll be damned if I ever get a response to highly technical questions. Completely lame. Boooooo Microsoft.
Maybe you are looking for
-
When I send PO to vendor, Attachements also to be sent along with that mail
Hi Guys, Right now, when I release a PO or issue 'mail output' in message types and save it, it sends PO priview to vendor thru email. I think its happening with config part which is done in NACE (custom message types...driver program...form routine)
-
How to include not firmed receipt elements (PRs) in the LTP
Hi Experts, I have ran the LTP MRP using a particular planning scenario, but the results doesn't show any Purchase requisitions, Planned Orders, etc in the long-term window. It shows only firm receipt elements like Purchase Orders, Production Orders
-
SAP to Data Services System (Business Objects)
Hi, Currently there is an RFC connection between Data Services and R/3 which exchange three idocs. Each idoc has an volume of 30k per day. As we are trying to introduce PI as central broker, will it be recommended to bring PI into the scope thinking
-
Playing C#4 through my Kurzweil K2600XS/MOTU MTP will not work in Logic Pro 8. I've opened different songs and get the same result. Never had this problem with Logic Pro 7. I've ruled out the K2600XS or MTP as the problem because I tested C#4 on a st
-
I'm having problems with game applications playing. Was frustrated so I deleted some and repurchased them and they still won't play!