EA4500 - Problem with devices - Can't modify/delete devices

Hi everyone.
I have a little problem with my router.
When I go to Device List and try to delete any device, I have an error pop-up:
I try to re-flash with the same firmware, reset, but nothing to do...
Actual firmware is: FW_EA4500_2.1.39.145204.SSA
Regards.

For the forums it seems IE 11 isn't compatible with the cloud website.
You can get access to the router using other browsers or IE versions by disconnecting the ISP device from the internet port on the router and opening http://192.168.1.1
I don't recommend using software to configure your router or the cloud. Just my opinion
I like the classic firmware anyway.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

TS1702 I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to rein

I have contacted EA about this and can find no help. I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to reinstall it. During the process you sign in and approve the purchase KNOWING that another window will open saying that you have previously purchased it and that there is no charge. So what happened this time? It will not connect and all of my saved and current games are wiped out. I want my money back, this game interface is pretty junk and operates like some ancient DOS program,,bug,bug,buggy. I want my money back.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Pls help me. Could i get any service with my 1 month old iphone 5. My device can't recognize wifi devices.

I bought this iphone 5 in Globe Telecome in the Philippines one month ago. I amvery worried coz of all the device here in our house this just the only one who can't connect to our home wifi. Even in our neighbors wifi. All our devices ipod 4 and 4s and laptop can connect except this iphone 5. I did all the trouble shooting but still it didn't work. Pls help me. I went to globe and it seems they can't help me with it. Is this covered by my warranty? Tnx

Welcome to the Apple Support Communities
Your log shows that graphic drivers have crashed, but there aren't any third-party extensions installed on your computer, so I suspect that there's a problem with the graphic card. I recommend you to take the Mac to an Apple Store to check if there's a hardware issue

Problem with version 8.1.1 deleting photos?

Hello, I just upgraded to iPhoto 8.1.1 and am having the first problems with iPhoto I have ever experienced. When I attempt to delete certain photos, the thumbnail remains. If I highlight the thumbnail, the information box in lower left corner references information on the event the photo is in, such as total size of the event and date range. If I try to quit iPhoto after doing this, it hangs and must be force quit. When I re-open iPhoto, the photo remains as if it was never deleted.
After reading many posts, I could not locate this issue, perhaps since the update is so new? Last night I rebuilt my library, as that sounds like the answer to most problems. After the complete library re-build, I am having the exact same problem.
I have about 19,000 photos that total 60 GB and have been using iPhoto for two years on the same iMac.

Welcome to the Apple Discussions.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Can't modify/delete Outlook 2010 Contact Group

I've got a user who created a new Contact Group in Outlook 2010 and now can't modify or delete the group. Other groups she's created before or since do not exhibit this behavior. Also, when you bring up the properties of the group, the window
looks different than the other groups and the icon in the top left of the window just has the card with no people in front of it.
Thanks

Hi,
A Contact Group, known in previous Outlook versions as a distribution list, is a grouping of e-mail addresses collected under one name. A message sent to a Contact Group goes to all recipients listed in the
group. You can include Contact Groups in messages, task requests, meeting requests, and in other Contact Groups.
Refer to the link below that about
How to Create and Manage Contact Groups in Outlook 2010
Sincerely,
Harry

Can't modify/delete/replace dwg files

I'm having a really odd problem with our 10.5.8 server:
In a share point we have a ACL with owner&group allow r&w permissions inherited to the whole subfolder. So we all should be able to add, delete and modfy files we create together; and that's what the permission inspector tells too.
But:
Everything works like it's supposed to except with .dwg files. We can read dwg files, but we can't overwrite or delete existing ones. When trying to overwrite a file from a program, it just tells it can't save it. In Finder if I try to replace or delete a dwg, Finder tells it's being used. But they aren't.
So what kind of process there can be running that's keeping all our dwg files locked?

Hi,
A Contact Group, known in previous Outlook versions as a distribution list, is a grouping of e-mail addresses collected under one name. A message sent to a Contact Group goes to all recipients listed in the
group. You can include Contact Groups in messages, task requests, meeting requests, and in other Contact Groups.
Refer to the link below that about
How to Create and Manage Contact Groups in Outlook 2010
Sincerely,
Harry

Provisioning Profile - problems with installation our app build on devices

We have problems with installation our app build on few devices. There are all in Provisioning Profile, but we don't know why we can't install the build on some devices. Any ideas?

Apple products needing Apple love/support (athough using Adobe to compile to Apple-code may be an obvious concern since nothing beats native-code)
The app still however requires code-signing in the correct manner - personally, the more the merrier.

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Is there a problem with FaceTime, can not connect. When dial it connects and drops. When friends are calling me they have calling message and I have connecting but it does not connect. Need help, face time is my life line.

Face time not working. When dialled it says connecting and drops immediately. When my friends calling it show connecting but it does not.
Is there a problem with face time. I am in south Africa, it was working perfectly up to Easter. Please help this is my life line.

There is a barely acknowledged issue. For Mac users Apple has released an update to the app, but for iOS users the recommendation is for users to update their ipad to the most recent operating system.
There may be a fix coming for iOS6 users (which seem to be many of those having problems) or there may not be. If your ipad isn't up to date then you can update it and see if that helps, or if you don't want to update then you may want to wait and see if there is either a fix or if it fixes itself.

Problem with validation - can this be fixed?

Hello I used an online tutorial to create an "express CSS
menu" the menu looks really good but it does not validate and in
IE7-Vista every page you try to access prompts an error that says
"Problems with this webpage may prevent it from displaying
properly.... error object expected..."
Is there anyway for me to fix this and keep this menu??
here is the link:
http://122.252.5.31/~lisa927/index.html
I did validate the menu example I used before I began but did
not realize the example used doctype html 4.01 and I am using xhtml
1.0, if I try to change my doctype to html 4.01 I get all sorts of
errors so my question is can i make this menu validate in xhtml
1.0???
shontelle

> <script type="text/javascript"
src="p7exp/p7exp.js"></script>
>
That would be correct assuming the file is IN THE TEMPLATES
FOLDER. It
should not be.
All links in the TEMPLATE file *should* be one of three kinds
1. Relative to the template file, e.g.,
<a href="../ (meaning that you must go up one level from
the template folder
to reach the root of the site, hence all other files, since
none of them
should be in the templates folder)
2. Relative to the site root, e.g.,
<a href="/ (meaning that one would begin looking for the
linked file at the
root of the site and follow the pathing from that point)
3. Absolute, e.g.,
<a href="
http:// (meaning that the link is to a page
external to the site).
If you are seeing any other kind of link, then it hasn't been
made properly.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"shonts" <[email protected]> wrote in
message
news:g16sce$a2k$[email protected]..
> HI something very strange going on.
>
> the code in my template reads : <link
href="../truestyles.css"
> rel="stylesheet" type="text/css" media="screen" />
> <script type="text/javascript"
src="p7exp/p7exp.js"></script>
>
> but when all the child pages created from the template
the code appears
> <link href="truestyles.css" rel="stylesheet"
type="text/css"
> media="screen" />
> <script type="text/javascript"
src="Templates/p7exp/p7exp.js"></script>
> <!--[if lte IE 7]>
> <style>
>
> The file "templates" is added there is nothing in my
templates folder but
> templates.
>
> if you access
http://122.252.5.31/~lisa927/p7exp/p7exp.js
where the
> template
> tells you to you will see the file has been uploaded.
>
> any ideas why the "template" is being added to the code
on child pages??
>

Lately and i dont know why i see a pop up about a problem with script. can some1 help me?

there is a pop up about a problem with script. it ask me end and contuniue the script. i didnt have that problem before. plz help me it gets really irritating. it asks a lot

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Problem with Archboot - can anyone help?

Right now there is a huge problem with Archboot's installer. During an install, packages' install scripts invariably fail to work properly. Two of them give an error about /bin/true not existing; udev's install script claims that /sbin/migrate-udev isn't there; perl's borks with a string of errors related to the symlinking it's supposed to do - it doesn't see the directories that it's supposed to create symlinks to.
This is quite a bit like what I saw with archbootstrap, so I think it may be a chroot-related issue, but if anyone has any clue as to the cause, please tell...
(And while we're at it, try Archboot when you get the chance. 8) )

My larch scripts do a very 'straight' from-nothing-up installation, as also is the case in my 'newarch' script for a sort-of bootstrap installation - see http://wiki.archlinux.org/index.php/Qui … stallation (I've just updated it).
The only really noticeable error is two "install script couldn't find /bin/true" failures, both for 'db' (its pre- and its post-install scripts, gcc hasn't got an install script), and I am pretty sure these are no problem at all.
Otherwise, the creation of kernel26.img seems not to work properly, but this is also no big deal - you can use kernel26-fallback.img and regenerate the former when you boot into the new system.
I built a larch CD a few days ago with all the latest stuff, and it works fine. Congratulations to the devs on making the recent migrations so smooth!

TS3367 FaceTime has a problem with calling (audio, video) between two devices when they are in the different networks.

Hi,
I have a problem with calling by FaceTime when me and my friend are in the different networks.
When i call to another device I see this call on that device and tap to the answer button after that i see a message "connecting" but the first device is trying to call in during about 1 minute and finish the call.
But if both of the devices have connected to the one network (wifi) it works correct.

Actually, it started working fine when I told it to capture
sound at 11kHz.. I should have tried that first, before making a
fuss here, sorry. Looks like some weird glitch, a driver problem
maybe, but anyway, switching to 11kHz seems to have solved
it.

Does anyone have problems with sending iMessages not depending on devices the last days, too?

We have 4 iPhone 4 iOS 5.1.1 and a MBP Early 2011 OS X 10.8, and there are problems sending iMessages on any of these devices the last days.
Just the red ! and "Not send" appears. Sometimes the messages is send regardless, but mostly not!

Hello
I agree with the user above. I think you have to change the power plan. If you surf in the Internet or write something in Word just switch to Power Saver power plan. This power plan will save a lot of battery power and also reduce the display brightness to enhance the battery life.
Furthermore here is an interesting article about the power management features of Windows:
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm

EA4500 - Problem with devices - Can't modify/delete devices

Similar Messages

Maybe you are looking for