EA4500 problem with https access

I am not able to access https sites (like banking etc.). Once I plug my old router back I have no such problem. I guess it must be router settings that I cannot figure out. Any help will be appreciated.
Jan

Secured websites use https which use Port 443. This port is being blocked by the router’s firewall by default. This link will guide you on how to open this port http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=cc6892adffa74956aaa5aeaa11e2c11b_4058.xml&pid=80&.... If it will not resolve the issue after port opening, make sure to update the router’s firmware, reset the router and reconfigure.

Similar Messages

Problem with file access in other computer in jsp

I have problem with file accessing in other computer in jsp.
The follow code
File folder=new File("Z:"+File.separator+"sharefolder");//Z is a net share driver
File[] files=folder.listFiles();
System.out.println("test");
System.out.println("length="+files.length);
will throw exception at the second print.
but it works well in main funtion.
Is anybody know what is the problem.
JSP works on windows2003 server,tomcat 5.0.28 JDK1.4 net share folder on windows2000 server

no error code for this.But when I start tomcat I get the follow error.
java.lang.IllegalArgumentException: Document base Z:\ does not exist or is not a readable directory
     at org.apache.naming.resources.FileDirContext.setDocBase(FileDirContext.java:138)
     at org.apache.catalina.core.StandardContext.resourcesStart(StandardContext.java:3910)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4138)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
     at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
     at org.apache.commons.digester.Rule.end(Rule.java:276)
     at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
     at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.apache.commons.digester.Digester.parse(Digester.java:1567)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
     at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:480)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error in resourceStart()
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error getConfigured
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Exception during cleanup after start failed
LifecycleException: Container StandardContext[msgstore] has not been started
     at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4466)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
     at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
     at org.apache.commons.digester.Rule.end(Rule.java:276)
     at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
     at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.apache.commons.digester.Digester.parse(Digester.java:1567)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
     at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:480)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)

Problem with Dynamically accessing EJB Class objects in WL 7.0 SP1

I am trying to build a component which has the ability to instantiate and execute
an known EJB method on the fly.
I have managed to build the component but when I try and execute it I get a ClassNotFoundException.
I know that the EJB I am trying to invoke is deployed and available on the server,
as I can see it in the console, I also seen to have been able to get the remote
interface of the object, my problem occurs when I try and access the class object
so I can perform a create on the object and then execute my method
The code I have written is below:
private Object getRemoteObject(Context pCtx, String pJNDIName, String pHomeBean)
throws Exception {
 String homeCreate = "create";
 Class []homeCreateParam = { };
 Object []homeCreateParamValues = {};
try {
//This call seems to work and doesn't throw an exception
Object home = pCtx.lookup(pJNDIName);
//However this call throws a java.lang.ClassNotFoundException
Class homeBean = Class.forName(pHomeBean);
Method homeCreateMethod = homeBean.getMethod(homeCreate,homeCreateParam);
return homeCreateMethod.invoke(home, homeCreateParamValues);
} catch (NamingException ne) {
logStandardErrorMessage("The client was unable to lookup the EJBHome.
Please make sure ");
logStandardErrorMessage("that you have deployed the ejb with the JNDI
name "+pJNDIName+" on the WebLogic server ");
throw ne;
} catch (Exception e) {
logStandardErrorMessage(e.toString());
throw e;
Any advice would be really appreciated, I'm fast running out of ideas, I suspect
it has something to do with the class loader but I'm not sure how to resolve it
Regards
Jo Corless

Hello Joanne,
Congratulations! I'm very happy that you've managed to fix your problem. It's
always essential to understand how to package applications when deploying on BEA
WebLogic. Usually, by throwing everything into an EAR file solves just about all
the class loader problems. :-) Let us know if you have any further problems that
we can assist you with.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Joanne Corless" <[email protected]> wrote:
>
>
I've fixed it!!!!!!!!
Thanks to everyone who gave me help!!!!
The class loader was the culprit which is what I suspected all along.
As soon
as I put the 2 jar files I was using into an EAR file the problem went
away!!!!!
Thanks again
Jo Corless
"Ryan LeCompte" <[email protected]> wrote:
Hello Joanne,
As Mr. Woollen mentioned, I also believe it's a problem with the class
loader.
You need to be careful how you arrange your EJBs, because WebLogic has
a specific
method in which it loads classes in an EAR, JAR, and WAR file(s). Please
refer
to http://dev2dev.bea.com/articles/musser.jsp for more information about
BEA WebLogic
class loading mechanisms and caveats. Also, try printing out the various
methods
that are available on the object that was returned to you via reflection.
For
example, use the getMethods() method, which returns an array of Method
objects
that you can subsequently cycle through and print out the various method
names.
This way you can discover if the class found/returned to you is indeed
the one
you intend to locate.
Hope this helps,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
Rob Woollen <[email protected]> wrote:
I believe the issue is the home interface class for this EJB is not
available in the class loader which is doing the reflection.
If you do:
getClass().getClassLoader().loadClass(homeInterfaceClassName)
I suspect it will fail. Reflection still requires that the class be
loadable.
-- Rob
Joanne Corless wrote:
Hi Slava,
If I make my code look like you describe below I get a compliationerror telling
me that
home.getMethod() is not recognised (no such method)
If I change it slightly and use
Method homeCreateMethod =
home.getClass().getMethod(homeCreate,homeCreateParam);
The code will compile OK but when executed it still throws a NoSuchMethodException
Any ideas ?
Thanks for your help so far
Regards
Jo Corless
Your code should look like
Object home = pCtx.lookup(pJNDIName);
Method homeCreateMethod =
home.getMethod(homeCreate,homeCreateParam);
return homeCreateMethod.invoke(home, homeCreateParamValues);
Regards,
Slava Imeshev
"Joanne Corless" <[email protected]> wrote in message
news:[email protected]...
Hi Ryan,
I also wanted to mention that if you do a "header search" in this
particular
newsgroup
with the search query as "reflection", you will see many previousmessages
regarding
reflection and EJBs. I believe you could learn a lot from thedifficulties
that
others have faced and solved.I tried that and although there was a number of similar cases noneof them
actually
seem to fix my issue. Thanks for the suggestion though
Are the EJBs that you are trying to access accessible via your
system
classpath?
Try to avoid having them accessible via the main system classpath,and
only bundle
them in your appropriate EJB jar files (contained in an EAR file,for
example).Maybe I should have laid the problem out a little clearer.
I have a number of EJB's bundled up in a JAR file which is hot deployedto
the
server. Within this first JAR file is an EJB (SSB) component that
needs
to
be
able to invoke a known method on another EJB. This second EJB may
or
may
not be
within the first JAR file but it also will be hot deployed.
The component trying to invoke the method on the 2nd EJB has to
be
able to
create
an instance of the 2nd EJB without actually knowing anything bar
a
JNDI
Name which
is passed in at runtime.
I can get as far as doing the
Object home = pCtx.lookup(pJNDIName);
This returned a class with the name
"com.csc.edc.projects.allders.httppostoffice.postman.PostmanBean_mp8qy2_Home
Impl_WLStub"
My problem seems to occur when I try and invoke the create method
Method homeCreate = home.getClass().getMethod("create", new Class[0]);
My code throws a java.lang.NoSuchMethodException at this point so
I
am
unable
to progress to the next step of :
Object bean = homeCreate.invoke(home, null);
So I can return the instantiated bean back to the calling client.
Why am I getting the NoSuchMethodException, is is because I am gettinga
stub
back rather than the home interface and if so how do I get the truehome
interface
from the bean
Thanks in advance
Jo Corless

Still having problems with VPN access

Hello!
I am having problems with my VPN clients getting access to the networks over a MPLS infrastruture. I can reach these resources form my Core network (172.17.1.0/24) and my Wifi (172.17.100.0/24) but not from my VPN network (172.17.200.0/24). From the VPN I can reach the Wifi network (which is behind a router) and the rule that allows that also allows access to the other networks but for some reason it is not working.
When I ping inside the core network from VPN I can connect and get responses. When I ping to the Wifi network, I can get responses and connect to resources there. A tracert to the wifi network shows it hitting the core switch (a 3750 stack) @ 172.17.1.1, then the Wifi router (172.17.1.3) and then the host. A tracert to a resource on the MPLS network from the VPN shows a single entry (the destination host) and then 29 time outs but will not ping that resource nor connect.
I've posted all the info I can think of below. Any help appreciated.
*** Here is a tracert from a core network machine to the resource we need on the MPLS:
C:\Windows\system32>tracert 10.2.0.125
Tracing route to **************** [10.2.0.125]
over a maximum of 30 hops:
1 1 ms <1 ms <1 ms 172.17.1.1
2 1 ms <1 ms <1 ms 172.17.1.10
3 5 ms 5 ms 5 ms 192.168.0.13
4 31 ms 30 ms 31 ms 192.168.0.5
5 29 ms 30 ms 29 ms 192.168.0.6
6 29 ms 29 ms 29 ms 192.168.20.4
7 29 ms 29 ms 29 ms RV-TPA-CRMPROD [10.2.0.125]
Trace complete.
172.17.1.10 is the mpls router.
**** Here is the routing table (sh ip route) from the 3750 @ 172.17.1.1
Gateway of last resort is 172.17.1.2 to network 0.0.0.0
S 192.168.30.0/24 [1/0] via 172.17.1.10
 172.17.0.0/24 is subnetted, 3 subnets
S 172.17.200.0 [1/0] via 172.17.1.2
C 172.17.1.0 is directly connected, Vlan20
S 172.17.100.0 [1/0] via 172.17.1.3
 172.18.0.0/24 is subnetted, 1 subnets
S 172.18.1.0 [1/0] via 172.17.1.10
S 192.168.11.0/24 [1/0] via 172.17.1.10
 10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S 10.2.0.0/24 [1/0] via 172.17.1.10
S 10.10.10.0/24 [1/0] via 172.17.1.10
S 10.20.0.0/24 [1/0] via 172.17.1.10
S 10.3.0.128/25 [1/0] via 172.17.1.10
S 192.168.1.0/24 [1/0] via 172.17.1.10
S* 0.0.0.0/0 [1/0] via 172.17.1.2
*** Here is the firewall config (5510):
ASA Version 8.4(1)
hostname RVGW
domain-name ************
enable password b5aqRk/6.KRmypWW encrypted
passwd 1ems91jznlfZHhfU encrypted
names
interface Ethernet0/0
nameif Outside
security-level 10
ip address 5.29.79.10 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 172.17.1.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 172.19.1.1 255.255.255.0
management-only
banner login RedV GW
ftp mode passive
dns server-group DefaultDNS
domain-name RedVector.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network WiFi
subnet 172.17.100.0 255.255.255.0
description WiFi
object network inside-net
subnet 172.17.1.0 255.255.255.0
object network NOSPAM
host 172.17.1.60
object network BH2
host 172.17.1.60
object network EX2
host 172.17.1.61
description Internal Exchange / Outbound SMTP
object network Mail2
host 5.29.79.11
description Ext EX2
object network NETWORK_OBJ_172.17.1.240_28
subnet 172.17.1.240 255.255.255.240
object network NETWORK_OBJ_172.17.200.0_24
subnet 172.17.200.0 255.255.255.0
object network VPN-CLIENT
subnet 172.17.200.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_1
network-object object BH2
network-object object NOSPAM
object-group network VPN-CLIENT-PAT-SOURCE
description VPN-CLIENT-PAT-SOURCE
network-object object VPN-CLIENT
object-group network LAN-NETWORKS
network-object 10.10.10.0 255.255.255.0
network-object 10.2.0.0 255.255.255.0
network-object 10.3.0.0 255.255.255.0
network-object 172.17.100.0 255.255.255.0
network-object 172.18.1.0 255.255.255.0
network-object 192.168.1.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 192.168.30.0 255.255.255.0
object-group network VPN-POOL
network-object 172.17.200.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
access-list Outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq smtp
access-list Outside_access_in extended permit tcp any object BH2 object-group DM_INLINE_TCP_1
access-list global_mpc extended permit ip any any
access-list Inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any
pager lines 24
logging enable
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination Inside 172.17.1.52 9996
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPN 172.17.1.240-172.17.1.250 mask 255.255.255.0
ip local pool VPN2 172.17.200.100-172.17.200.200 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (Inside,Outside) source static EX2 Mail2
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.200.0_24 NETWORK_OBJ_172.17.200.0_24
nat (Inside,Outside) source static inside-net inside-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static LAN-NETWORKS LAN-NETWORKS destination static VPN-POOL VPN-POOL
object network inside-net
nat (Inside,Outside) dynamic interface
object network NOSPAM
nat (Inside,Outside) static 5.29.79.12
nat (Outside,Outside) after-auto source dynamic VPN-CLIENT-PAT-SOURCE interface
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 5.29.79.9 1
route Inside 10.2.0.0 255.255.255.0 172.17.1.1 1
route Inside 10.3.0.0 255.255.255.128 172.17.1.1 1
route Inside 10.10.10.0 255.255.255.0 172.17.1.1 1
route Inside 172.17.100.0 255.255.255.0 172.17.1.3 1
route Inside 172.18.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.11.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.30.0 255.255.255.0 172.17.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server RedVec protocol ldap
aaa-server RedVec (Inside) host 172.17.1.41
ldap-base-dn DC=adrs1,DC=net
ldap-group-base-dn DC=adrs,DC=net
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=Hanna\, Roger,OU=Humans,OU=WPLAdministrator,DC=adrs1,DC=net
server-type microsoft
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 Inside
http 24.32.208.223 255.255.255.255 Outside
snmp-server host Inside 172.17.1.52 community *****
snmp-server location Server Room 3010
snmp-server contact Roger Hanna
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto ikev1 enable Outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
telnet 172.17.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 172.17.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
dhcpd address 172.17.1.100-172.17.1.200 Inside
dhcpd dns 172.17.1.41 172.17.1.42 interface Inside
dhcpd lease 100000 interface Inside
dhcpd domain adrs1.net interface Inside
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy RedV internal
group-policy RedV attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
default-domain value ADRS1.NET
group-policy RedV_1 internal
group-policy RedV_1 attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
default-domain value adrs1.net
username rparker password FnbvAdOZxk4r40E5 encrypted privilege 15
username rparker attributes
vpn-group-policy RedV
username mhale password 2reWKpsLC5em3o1P encrypted privilege 0
username mhale attributes
vpn-group-policy RedV
username dcoletto password g53yRiEqpcYkSyYS encrypted privilege 0
username dcoletto attributes
vpn-group-policy RedV
username rhanna password Pd3E3vqnGmV84Ds2 encrypted privilege 15
username rhanna attributes
vpn-group-policy RedV
tunnel-group RedV type remote-access
tunnel-group RedV general-attributes
address-pool VPN2
authentication-server-group RedVec
default-group-policy RedV
tunnel-group RedV ipsec-attributes
ikev1 pre-shared-key *****
class-map global-class
match access-list global_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
class global-class
flow-export event-type all destination 172.17.1.52
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:202ad58ba009fb24cbd119ed6d7237a9

Hi Roger,
I bet you already checked it, but does the MPLS end router has route to VPN client subnet 172.17.200.x (or default) pointing to core rtr)?
Also, if the MPLS link has any /30 subnet assigned, you may need to include that as well in Object group LAN-NETWORKS.
Thx
MS

Problem with https internet url for Portal

Hello ,
We are running EP 7 SP 13.
We had a problem with the j2ee engine going down due to a db problem .It is ok now and and j2ee is up and running fine and the portal is accessible from the intranet.
But there is a problem with the https url that we use for internet access. It gives "page cannot be displayed error".
There is a IISproxy in place for internet access.Https certificate has not expired. Couldnt find much in the portal logs and trace or am I looking in the wrong place?
Any help would be most appreciated.
Rgds

Hi Vineeth
Check the IIS settings, , they might not have started properly.
EP5: Enabling SSL and renewing the J2EE certificate
SAP Note Number: 685306
Can you check the contents of Keystore in Visual admin,
Regards
Kaleem
Edited by: Kaleem on Aug 19, 2008 2:11 PM

EA4500 - Problem with devices - Can't modify/delete devices

Hi everyone.
I have a little problem with my router.
When I go to Device List and try to delete any device, I have an error pop-up:
I try to re-flash with the same firmware, reset, but nothing to do...
Actual firmware is: FW_EA4500_2.1.39.145204.SSA
Regards.

For the forums it seems IE 11 isn't compatible with the cloud website.
You can get access to the router using other browsers or IE versions by disconnecting the ISP device from the internet port on the router and opening http://192.168.1.1
I don't recommend using software to configure your router or the cloud. Just my opinion
I like the classic firmware anyway.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Problem with HTTP load balancing

Hello Experts
I have a problem when i do loadbalancing for links like http://1.1.1.1/site/home where 1.1.1.1 is the VIP address (i got http not found), while it is working fine when the link is http://1.1.1.1,
the link is working fine on the real servers for example when i try http://2.2.2.2/site/home it works
by the way, im not doing URL loadbalancing,
any ideas
Thank you in advance

It is generally good idea for this type of cases to get a sniffer trace (in ACE module span 10G backplane interface from supervisor or if ACE appliance take parallel span session of client and server vlan).
This case was investigated in TAC SR and this is a small summary of the traces that may help other users hitting this issue (usually it is good idea to filter by http and client IP) :
This is what we have seen for the non-working scenario.
Packet 1: Client sends HTTP GET to ACE VIP
Packet 2: ACE forwards HTTP GET to RSERVER
Packet 3: RSERVER answers ACE with HTTP 404
Packet 4: ACE forwards the real server response (HTTP 404) to the client
ACE was not changing anything in the packets that were being loadbalanced. And the HTTP 404 error sent from the server that ACE was forwarding indicates that the Web server thinks that the HTTP data stream sent by the client was correct, but simply can not provide the access to the resource specifief by URL.
Bottom line it was found that in this case the server behaves in a different way based on the hostname used to connect to the application, and this should be addressed on the application/server side. An easy way to check this is by using the server name pointing to the vip in local client hostfile.

Problem with Clean Access Agent and Windows Updater

I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
Any help is appreciated!!

Verify the allowed hosts in CCA agent.
Try these link:
http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml

Problem With Site Access

Hi guys,
I've been trying to access the Market Place as well as my account at: www.renderosity.com, but when I click to the Market Place on the link I get the message below (included also is my correspondence with the site's admin). I can access the rest of the site with no seeming problem. And it seems to be only that site that I have been having problems with. I have Java enabled and the block pop-up is unchecked. But it is only with that site that I am having problems with. They have had no reports of any problems from their side. Thanks for any help. Please reply to my other e-mail: [email protected]
Cheers;-)
Michael
404 Not Found
http://219.235.223.223/forbid.htm
Not Found
The requested URL /forbid.htm was not found on this server.
Apache/1.3.22 Server at WebRoad Port 80
Hi Michael,
Do you have javascript enabled? Are you running any security software?
Karen
Michael Boatwright wrote:
Hi Karen,
I finally managed to get through to the Market Place, but this is how the page looked (See Attached image). Any ideas? I still cannot get into my account though.
Hi Michael,
I've never seen that url before which is why I got confused.
Try this one and let me know if you have problems.
http://market.renderosity.com/
Regards,
Debbie Montique
MarketPlace Manager
Michael Boatwright wrote:
Hi Deb,
and thanks for the quick reply. That URL is what shows up when I click on the Market Place Home. Maybe it's just temporary. I certainly hope so! I've never had this problem before. I guess time will tell. Thanks again.
Cheers,
Michael
Hi Michael,
We're not aware of any problem on the site. Can you please give me the exact URL that you are trying to access?
Additionally, it may be helpful if you log out of Renderosity, empty your cookies and cache on your browser, and then sign back in and see if that resolves the problem.
Kind regards,
Karen Janes
Renderosity Admin Team
Michael Boatwright wrote:
Hi guys,
I have never had problems before with access to any part of Rendo and even now I can access parts of your site, but I can neither access my account nor the market place. Is there something going on from your end? Here is the message that I'm getting when I try to get to those parts of the site that I just mentioned:

Hi Ayesh,
Per my test, it seems that the Site Collection Access is only available for the local group of that site collection which is used to store the site collection local term sets.
To make the site collection local group available, please refer to the steps in the link below:
http://www.dotnetsharepoint.com/2013/10/how-to-get-site-collection-local-term.html#.U-PVOvmSyd5
After that, you will see the Site Collection Access when you click the group in Term Store Management.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problems with http header "Content-Location"

Does anyone know how to override the
"Content-Location" http header. We are having issues with search engines and this header being returned from Apache/oc4j. In a nutshell, I have a site that uses the
Struts framework, where the actual urls submitted would be for example
(http://mysite/home.do), where ".do" is just a servlet mapping. When we have
tried to follow the one link that has been spidered, it actually contains
the full path that appears in the "Content-Location" header (i.e.
http://mysite/web-inf/jsps/bogus.jsp) which in this case can't even be
accessed. The feedback we get from third-party utilities that try to spider
the site is that it is stopping because it has already indexed "bogus.jsp",
which in reality will always appear since it is a template, where the actual
urls will be different as is above.
Because the "Content-Location" header is being returned to any
client hitting the site, search engine spiders stop indexing at the first page because the value in "Content-Location" is the same.
Solutions tried:
mod_headers in Apache - have tried "Header unset"
HttpServletResponse.setHeader()
Any help would be appreciated

Hi there,
i'm having a similar problem to this when trying to run some web page speed optimisation software...
i think the issue also causes problems with the Opera browser (although this may have been fixed in the latest version).
anybody any ideas how to stop the header being sent in the response?
many thanks,
Andy

I have problems with automatic accessing to a host HP ALM 11.52

I have a license for 5 jobs, and at the moment I'm using 4 machines, I can't use the fifth because I have problems with planning. I designate the start time and the status of Operations , but when the time comes I have problem with login to the system and the status changes to not operational. want to know what is the reason?
log file:
Error getting task Unauthorized <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"/> <title>Error 401 Unauthorized</title> </head> <body><h2>HTTP ERROR 401</h2> Problem accessing /qcbin/comet. Reason: <pre> Unauthorized</pre><hr />Powered by Jetty:// </body> </html>
Throwing exception: Operation <AbortRequested> requested by server on execution item type <hpalmtestexecution> was not handled, there's no such active execution item type.
Error processing new task HP.ALM.Lab.Agent.ExecutionAgentAPI.Exceptions.ExecutionItemException ---> HP.ALM.Lab.Agent.ExecutionAgentAPI.Exceptions.OperationOnIdleException: Operation <AbortRequested> requested by server on execution item type <hpalmtestexecution> was not handled because there is no such active execution item type. в HP.ALM.Lab.Agent.ExecutionManager.Task.TaskManager.UpdateTask(ExecutionItem executionItem) в HP.ALM.Lab.Agent.ExecutionManager.Activities.AsyncGetTaskActivity.HandleExecutionItem(String encryptedXmlString) --- Конец трассировки внутреннего стека исключений ---

everything worked 4 months ago, but maybe there were some updates and something has changed, and now one machine not working

ACE : Stickyness problem with http cookies

Hi,
I am facing a serious problem with stickyness in a e-commerce configuration.
Here is the setup :
An ACE load balance user requests on two Apache servers
cookie-insert is used to stick a user on one Apache server
The home page is accessed via http on port 80
On the Home page, there is a link to allowing the user to login
The login process uses SSL
During the login, backend SSL is required between the ACE and the selected Apache server
The login is a POST request to the Apache server
After a successful login, the home page is reloaded on port 80 and the name of the user should appear on the top of the page
The ACE configuration :
Two sticky groups are configured : one for HTTP acess and another for HTTPS access
Two server farms are defined, both using the same real servers, but with different ports (80 and 441)
     sticky http-cookie STICKED-TO ECOM_STICKY_TEST_HTTP
       cookie insert browser-expire
       timeout 240
       replicate sticky
       serverfarm ECOM_FARM_TEST_HTTP
          sticky http-cookie STICKED-TO ECOM_STICKY_TEST_HTTPS
       cookie insert browser-expire
       timeout 240
       replicate sticky
       serverfarm ECOM_FARM_TEST_HTTPS
     serverfarm host ECOM_FARM_TEST_HTTP
       description *** e-Commerce Test Server Farm ***
       probe ECOM_PROBE_TEST
       rserver HQCHECOM01 80
        inservice
       rserver HQCHECOM02 80
        inservice
         serverfarm host ECOM_FARM_TEST_HTTPS
      description *** e-Commerce Test Server Farm ***
      probe ECOM_PROBE_TEST
      rserver HQCHECOM01 443
       inservice
      rserver HQCHECOM02 443
       inservice
The problem :
Let analyse the sequence of events and the value of the http cookie for each of them :
When the the home page is originally loaded, the ACE selects SERVER-1
The ACE inserts the cookie "A" in the server responses
The user is sticked to SERVER-1
Then, the user tries to login and an SSL session is established with the ACE
The user sends a POST request containing the cookie "A"
A backend SSL session is established with SERVER-1
The POST request is forwarded to SERVER-1
SERVER-1 responds with a 200 OK and the ACE generates another cookie "B" as it belongs to the sticky group ECOM_STICKY_TEST_HTTPS
The client browser reloads the page on port 80 and provides the cookie "B" (the last received) !!
The ACE sees the cookie "B" but does not find it in its database for the sticky group ECOM_STICKY_TEST_HTTP
The ACE perform another load balancing decision and selects SERVER-2 ! (instead of SERVER-1)
The page is reloaded, but the name of the user does not appear on it
The question :
As it is not possible to have only one sticky group in this configuration what would be the solution to make sure that the same server is selected for http and https ?
Thank you for any hints,
Yves

Hi Gilles,
I followed your recommendation to configure static cookie entries in each sticky group, but I still experience the problem of sessions getting re-load balanced to the second server when returning from HTTPS to HTTP :
It seems that the ACE ignores the static entries !
To make my question clear, I repeat hereafter the setup and the encountered problem :
Here is the setup :
An ACE load balance user requests on two Apache servers
cookie-insert is used to stick a user on one Apache server
The home page is accessed via http on port 80
On the Home page, there is a link to allowing the user to login
The login process uses SSL
During the login, backend SSL is required between the ACE and the selected Apache server
The login is a POST request to the Apache server
After a successful login, the home page is reloaded on port 80 and the name of the user should appear on the top of the page
The ACE configuration :
Two sticky groups are configured : one for HTTP acess and another for HTTPS access
Two server farms are defined, both using the same real servers, but with different ports (80 and 443)
In the ECOM_STICKY_TEST_HTTP stick group the two following cookies are automatically generated :
R105816849   for the server HQCHECOM01
R105852786   for the server HQCHECOM02
In the ECOM_STICKY_TEST_HTTPS stick group the two following cookies are automatically generated :
R355972695   for the server HQCHECOM01
R357158616   for the server HQCHECOM02
I statically configured in the each sticky group the cookies used by the other sticky group, to allow stickiness when the browser switches from HTTP to HTTPS and vice versa :
sticky http-cookie STICKED-TO ECOM_STICKY_TEST_HTTP
cookie insert browser-expire
timeout 240
replicate sticky
serverfarm ECOM_FARM_TEST_HTTP backup WEB_REDIRECT_001
56 static cookie-value "R355972695" rserver HQCHECOM01
64 static cookie-value "R357158616" rserver HQCHECOM02
sticky http-cookie STICKED-TO ECOM_STICKY_TEST_HTTPS
cookie insert browser-expire
timeout 240
replicate sticky
serverfarm ECOM_FARM_TEST_HTTPS backup WEB_REDIRECT_001
72 static cookie-value "R105816849" rserver HQCHECOM01
80 static cookie-value "R105852786" rserver HQCHECOM02
serverfarm host ECOM_FARM_TEST_HTTP
description *** e-Commerce Test Server Farm ***
probe ECOM_PROBE_TEST
rserver HQCHECOM01 80
   inservice
rserver HQCHECOM02 80
   inservice
serverfarm host ECOM_FARM_TEST_HTTPS
description *** e-Commerce Test Server Farm ***
probe ECOM_PROBE_TEST
rserver HQCHECOM01 443
   inservice
rserver HQCHECOM02 443
   inservice
The problem :
Let analyse the sequence of events and the value of the http cookie for each of them :
When the the home page is originally loaded, the ACE selects SERVER-1
The ACE inserts the cookie "A" in the server responses
The user is sticked to SERVER-1
Then, the user tries to login and an SSL session is established with the ACE
The user sends a POST request containing the cookie "A"
A backend SSL session is established with SERVER-1
The POST request is forwarded to SERVER-1
SERVER-1 responds with a 200 OK and the ACE generates another cookie "B" as it belongs to the sticky group ECOM_STICKY_TEST_HTTPS
The client browser reloads the page on port 80 and provides the cookie "B" (the last received)
The ACE sees the cookie "B" and should use the static cookie entry to select the SERVER-1
But instead, the ACE perform another load balancing decision and selects SERVER-2 !
The page is reloaded, but the name of the user does not appear on it
LiveHTTP Trace on Firefox :
GET /ecom/medias/sys_master/8800775602206/Home-page-main-banners-video.jpg HTTP/1.1
Host: ecom.test.toto.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 (CK-IBM) Firefox/3.5.8
Accept: image/png,image/*;q=0.8,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://ecom.test.toto.com/uk/en/home
Cookie: STICKED-TO=R105816849;
HTTP/1.1 200 OK
Set-Cookie: STICKED-TO=R105816849; path=/
Date: Mon, 18 Oct 2010 15:31:37 GMT
Server: Apache/2.2.13 (Red Hat)
Connection: close
Transfer-Encoding: chunked
Content-Type: image/jpeg
Here we switch on HTTPS :
https://ecom.test.toto.com/uk/en/j_spring_security_check
POST /uk/en/j_spring_security_check HTTP/1.1
Host: ecom.test.toto.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 (CK-IBM) Firefox/3.5.8
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://ecom.test.toto.com/uk/en/home
Cookie: STICKED-TO=R105816849; JSESSIONID=089DCF987DC03CAE0F516298EB886DAB.node1;
Content-Type: application/x-www-form-urlencoded
Content-Length: 75
spring-security-redirect=&j_username=yves144%40yahoo.com&j_password=junon01
Here we see cookie for the same server but for the HTTPS sticky group :
HTTP/1.1 302 Moved Temporarily
Set-Cookie: STICKED-TO=R355972695; path=/
Set-Cookie: _hybris.tenantID_=""; Expires=Thu, 01-Jan-1970 00:00:10 GMT; Path=/; HttpOnly
Date: Mon, 18 Oct 2010 15:31:39 GMT
Server: Apache/2.2.13 (Red Hat)
Location: http://ecom.test.toto.com/uk/en/home
Content-Length: 0
Connection: close
Content-Type: text/plain; charset=UTF-8
Here we switch back to HTTP :
http://ecom.test.toto.com/uk/en/home
GET /uk/en/home HTTP/1.1
Host: ecom.test.toto.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 (CK-IBM) Firefox/3.5.8
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://ecom.test.toto.com/uk/en/home
Cookie: STICKED-TO=R355972695; JSESSIONID=089DCF987DC03CAE0F516298EB886DAB.node1;
Here we see that the second server has been wrongly selected !
HTTP/1.1 200 OK
Set-Cookie: STICKED-TO=R105852786; path=/
Set-Cookie: _hybris.tenantID_=""; Expires=Thu, 01-Jan-1970 00:00:10 GMT; Path=/; HttpOnly
Set-Cookie: JSESSIONID=5A0F6EB8FBF63D5D0590FECEC62A302E.node2; Path=/; HttpOnly
Date: Mon, 18 Oct 2010 15:31:40 GMT
Server: Apache/2.2.13 (Red Hat)
Pragma: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Cache-Control: no-cache, no-store
Content-Language: en-GB
Connection: close
Transfer-Encoding: chunked
Content-Type: text/html;charset=UTF-8
http://ecom.test.toto.com/ecom/medias/sys_master/8796174057502/uk.gif
GET /ecom/medias/sys_master/8796174057502/uk.gif HTTP/1.1
Host: ecom.test.toto.com
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 (CK-IBM) Firefox/3.5.8
Accept: image/png,image/*;q=0.8,*/*;q=0.5
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://ecom.test.toto.com/uk/en/home
Cookie: STICKED-TO=R105852786; JSESSIONID=5A0F6EB8FBF63D5D0590FECEC62A302E.node2;
HTTP/1.1 200 OK
Set-Cookie: STICKED-TO=R105852786; path=/
Date: Mon, 18 Oct 2010 15:31:40 GMT
Server: Apache/2.2.13 (Red Hat)
Content-Length: 382
Connection: close
Content-Type: image/gif
Hypothesis :
It seems that the static entries are not considered by the ACE...

Problem with https

I used Firefox for a long time with no problems. I never played with the internal settings (from about:config). One day, with version 21, I found out that every time I do a image search in Google, I could see only 15 to 20 pics correctly and all the others appeared as grey boxes. I deleted cookies and cache but nothing changed. I tried to find a solution and in a Mozilla’s forum was said to reset Firefox from “Troubleshooting Information” menu. I did it and the problem disappeared. Then, another, worse problem, appeared. All sites were tried to get opened with https in front and in all cases Firefox was telling me that the connection is untrusted and can’t confirm that my connection is secure. I was selecting “I understand the risks” and the site was appeared but it was altered, it hadn’t the look that it should have. I did a google search to find a solution. Nothing really helpful came up. In your forum I found a setting, “browser.urlbar.autoFill” that should be turned to false. I did it and the problem was fixed is some pages. Now I can open google and some other pages with no problem but some others, like yahoo mail, that require secure connection (https) cannot get accessed. I tried to uninstall Firefox using Revo Uninstaller, to be sure that all data will be deleted. I reinstalled Firefox but the problem still exists. I uninstalled Firefox again and downloaded and installed version 22 beta 3 of Firefox with the same luck. So, what’s wrong? What should I do?

Check out why the site is untrusted (click "Technical Details to expand that section) and if this is caused by a missing intermediate certificate then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
Some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.
*ESET setup -> advanced setup -> extend web and email tree -> SSL
*SSL protocol: Do not scan SSL protocol

Remote Delta link setup problem with Bean / Access Service

Hello,
I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
I already have the Remote Role Assignment working without any issues.
The following have been done successfully:
1. Same user repository has been setup for both the portals
2. Setup trust between producer and consumer (SSO working fine)
3. Producer added and registered succesfully on consumer
4. Permissions setup on producer and consumer
4. pcd_service user with required UME actions setup
I am able to see all the remote content in the Consumer portal.
When I try to copy the remote content and paste it as local content, I am getting the following error:
Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
After increasing the log severity, I am able to see the following in Default Trace:
com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
AbstractAdvancedOperation.handleDirOperationException
[EXCEPTION]
com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
Could not retrieve the bean / access service to connect with producer
Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
I am stuck at this point and am not able to find any information on this.
I would really appreciate if some one can point me in the right direction.
Thank you for reading.
- Raj

Hi Raj,
Please check your config of the P4 port on the producer. Is it really 50004 (check SystemInfo of the producer)?
I do think there's a problem with the P4 communication since RDL requires P4 connection.
Do you have load balanced consumer-producer connection? Please refer to this blog for further details
Little known ways to create a load balanced Consumer Producer connection in a FPN scenario
Regards,
Dao

Problem with MS Access Files and executable files migrateds

Hi all.
We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES 2 SP2a. I already migrated one volume and in this weekend well migrate the last, and most important, volume to new OES 2 server.
The problem is about some MS Access databases that are very very used for all users and some executable applications that was writed using fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to libraries, databases, images, etc.
The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and in this time the two servers will co-exists. I want to know if it is possible redirect NCP requests to OLDSERVER to NEWSERVER without users rewrite all of MS Access and executable applications. Is it possible?
Tks
Alan Cota.

AlanCota wrote:
>
> Hi all.
>
> We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES
> 2 SP2a. I already migrated one volume and in this weekend we´ll migrate
> the last, and most important, volume to new OES 2 server.
>
> The problem is about some MS Access databases that are very very used
> for all users and some executable applications that was writed using
> fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to
> libraries, databases, images, etc.
>
> The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and
> in this time the two servers will co-exists. I want to know if it is
> possible redirect NCP requests to OLDSERVER to NEWSERVER without users
> rewrite all of MS Access and executable applications. Is it possible?
>
> Tks
>
> Alan Cota.
>
>
Have you considered trying to use a dns alias to it. I have not tested with
MS access specifically but many other apps it works perfectly for. This is
how I get around those issues. Of course your issue is that you still
havethe existing server in the tree. How much will there still be on the
old server. You could rename the old nw server and than update its info in
dns to resolve this.

EA4500 problem with https access

Similar Messages

Maybe you are looking for