EA4500 Router and HP OJ8600 all in one printer interface questions.

Hello- I am running IE11,WIN8.1,1TB HD,12GB memory with Linksys's EA4500 Router connected to computer via Ethernet cable. The computer is a Lenovo desktop(K430). I ran a Troubleshoot HP installation test on the interface between the computer and EA4500. I opened my Linksys's Smart Wi-FI to perform the two following tasks.The Troubleshoot HP Installation suggested that I should set MAC Address Filtering to Disabled which I did with no problems. The Troubleshoot HP installation also suggested that I find my printer's MAC address and add it to my list of devices that are allowed to access my networh. How do I do this? Thanks.
Solved!
Go to Solution.

You should do a print configuration page from the printer and that should detail you all infomration regarding MAC and IP addressing. I recommend not using Mac Filtering as it's not needed. I recommend setting up a static IP address ON the printer, 192.168.1.86 which should be outside of the main routers default DCHP pool of .100 thru .199. You'll need to refer to the Mfr help and information on how to set up networking and the configuration of the printer. Review the User Manual as well.

Similar Messages

Installing software for MAC 0S X 106.8 and ENVY 7645 all in one printer

Is there a way to download software so that my MAC OS X 10.6.8 and work with my new HP ENVY 7645 all-in-one printer?
If so, please tell me how to do that? Thanks!

Hi,
I afraid not.
The printer is only supported on 10.7 or newer OS versions, as listed within the System Requirements below:
http://support.hp.com/us-en/document/c04353671/
If your Mac support Yosemite you may upgrade your operating system to 10.10 for free:
https://www.apple.com/osx/how-to-upgrade/?
The other option os to replace the printer with another model which is compatible with your operating system.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I just upgraded to mac osx lion and my 7410 all-in-one printer will not work

I cannot get my hp officejet 7410 all-in-one printer to work with Mac OS X Lion

hi,
check this link for Mac 10.7 installation guide.
l0ri3
~Though I work with HP my posts and replies are my own and not from HP.~

Airport Express and HP F4180 All in One Printer

Hi
I just bought an Apple Airport Express to connect my F4180 to my wireless home network. This F4180 used to be connected directly via USB to my Vista PC and was available to the other laptops by sharing the printer. This worked ok, but I always had to start this specific computer to make the F4180 available for the other laptops.
After installing the Airport Express and Bonjour everything seemed perfect, but after the first print I noticed that only 60% of the page was printed and an error occured. I tried everything, installing, reinstalling, deleting, reading forums, helpdesks, etc, etc, but did not find an answer.
Does anyone have a clue?
Thanx in advance
Henri
Vista,
HP F4180 All in One printer,
Apple Airport Express (latest version),
Apple Bonjour (latest version),
Linksys E200 wireless
Apple Airport Express installed as extension of existing network

This combination SHOULD work but it often does not. I have replaced several base routers from non-Airport to Airport and resolved issues like this - USB printers, AirPlay issues, etc. Its the only way I know how to make it work, sorry.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Wireless printing with time capsule 1tb and new wireless all in one printer

I am having problems with printing wirelessly from my time capsule 1tb. I currently have a hp 5510v office all in one printer and drivers can not be found to support printing wirelessly however it can print via usb. What I need is help in picking out a new all in one printer that can print wirelessly from time capsule 1tb. Please help

Hi,
my hp photosmart C6180 all in one works flawlessly with it plugged in to my time capsule all functions.
I used to have it set up using it wirelessly from the printer however for some reason after a update (i think) it stopped working & would not print so had to plug in to time capsule.
Dave

Compatibility OS X Lion and HP 2610 all in one printer

Hi, I have an old network printer HP Photosmart 2610 and with Snow Leopard I cannot print because system tells that software is not complete. On HP there isn't drivers and software for Snow because is included in system software. Someone has this issue? Solutions? Thanks

Not only is your older printer incompatible with the Lion; but the HP all-in-one that the local Apple stores are heavily promoting at the moment with a 100% rebate are too. Imagine my surprise when after spending an hour in the Apple store where the helpful staff "upgraded" the operating system on my brand new iMac from Leopard to Lion, I returned home last evening to set up my new printer and learned that it is not compatible with OSX Lion. I called the store today and they confirmed that the printers they are pushing are incompatible with the new system. They offered to restore my computer to the Snow Leopard system if I will leave work, pack up the computer and bring it to their store.
I next tried a live chat with the Apple website. That person was unable to provide technical support. She referred me to Apple's customer service number, which I dialed. After waiting on hold for ten minutes a friendly voice inquired what was my issue. When I told her, she offered to transfer me to a technical support person only if I could tell her the Serial Number of my iMac. Unfortunately, I am at work and the computer is at home. I have not yet memorized that multi-digit number.
This is our first experience with an Apple computer. We made the change from Windows based PC with some trepidation, but also with optimism based on great recent experience with an iPhone and on recommendations of many friends. So far the experience has been incredibly poor. I used to love lions. But not anymore.
Lionhater

C5180 All-in-one Printer Feeder Question

One of the four feeders on the paper tray came off, which makes the paper feed incorrectly. Is there a way to put the black clip back on the tray? Please help. I love my printer. Is this something that can be fixed or will I have to replace the printer?

Sure, uninstall the software and re-install from here.
There is also a patch for those who upgraded from Vista to 7, but it is not clear if this is just for those who left their HP software in place during the upgrade or if it would also apply to your situation.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT4356 Hello I have a Netgear R4500 router and connected to Dell 1720 laser printer. Question how can i print from my iphone 5?

need some in configuring to print from iphone 5 to dell 1720 using r4500 router

There shouldn't be any configuring necessary.
As long as your iPhone and printer are both connected to the same wireless network it should just work.
Go to the picture/document you want to print, select the options button (usually looks like a square with an arrow coming out of it) and you should have an option to 'print' or something along those lines.
If the option is not coming up, and you're sure they're both connected to the same network, then it's possible that Dell and apple don't like each other. I seem to remember hearing that Airprint may only work with HP printers?

I am unable to stop auto delivery of apps. on HP Photosmart 5520 all in one printer

I am unable to stop auto delivery of apps. on HP Photosmart 5520 all in one printer
This question was solved.
View Solution.

To add on to what sabertooth04 stated, here is a link to a document that addresses print apps for your model of printer. Click on the drop down titled "Managing Scheduled Delivery Print Apps" and the option to cancel or remove an app will be available for you to click on and review the steps to remove that app . I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

MacBook pro and airport extreme router. How to print wirelessly to an old HP wireless photosmart all in one printer

With MacBook pro and airport extreme router, how can I print wirelessly to an old HP wireless photosmart all in one printer? What is needed or what process?

You need to make sure that the HP has an updated printer driver that works with 10.6 for that printer. You can check here:
http://www8.hp.com/us/en/support-drivers.html

HP Deskjet 3050A All-in-one printer J611 series - mavericks and wireless set up

Hi
I have a HP Deskjet 3040A All-in-one printer J611, I have had this printer for about 2years and everything worked perfect then I bought an Apple still all was alright but when I updated my software I got Mavericks and ever since then everything went wrong....I have updated my computer and have AirPrint now and also HP ePrint(currently). How ever the printer was not working or connecting.
Problem 1:
When I tried to fix the problem I uninstalled all HP drivers to reinstall - found that you have to install the apple app Done!(Airprint)
The printer was picked up by the computer and I can scan but I can not print, I'm using the USB cable, and when I print the computer shows it is printing and the printers lights come on but nothing happens(no messages display on the printer) then the computer shows the print is done - but the printer didn't print. Scan is working fine.
Problem 2:
Because of constant problems with the wireless connection I wanted to reconnect it to the router - Restore default.
But now because I don't have the HP drivers, I have no idea how to connect it and I tried both connection ways WPS is not working when I press it on the route...nothing happens and the PIN, where are you suppose to enter the pin, nothing comes up on my computer (USB connected)
I have read the installation pages over and over but can't figure out what is wrong, any advice would be appreciated.
This question was solved.
View Solution.

Hi Lilly4,
I can certainly help you get the printer on the network and working again.
Follow the steps in this thread to put the printer on the network without using the software or the WPS button. I believe we have success doing it this way.
If you continue to experience an issue after the printer is on the network, please let me know. Thanks.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet 6500A Plus e-All-in-One Printer - E710n wireless print and web app problem

We have an HP Officejet 6500A Plus e-all-in-one Printer - E710n and run Windows 7 on our laptop.
I have run the wirelss setup wizard and have successfully connected the printer to the router, and both the laptop and printer are on the same network and have identical SSID.
However, we can not send any prints the printer wirelessly. We have to hook it up to the USB to do so. We are also unable to access our web apps; pressing the app button on the printer control panel brings up the following:
"Connection error. The printer was unable to connect to the server. Check your internet connection and try again."
I have run through the suggested solutions under "A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint" in the customer care help centre which didn't work, although when I tried to enter the IP address under IPv4 into the browser address bar it timed out. I tried the HP Print and Scan Doctor, but it returns a result that suggests everything is fine.
I turned off the firewall and tried again with no luck.
I really am at a loss now. Diagnostics say it should work, but it doesn't. Help!

Disable Bitdefender altogeher and try again.
Also, see this: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02251103
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My hp all in one printer will not link to my new router.

I have a hp all in one printer deskjet 3510 model and i just got a new belkin N600 router and they will not link for wireless printing. The printer just times out when I try to get them to link. I use the push button setup because thats what i have. How can i get them to link. I had no problem with my old router it was a linksys.

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Wireless connection between computer and HP Officejet 6600 e-All-in-One Printer.

I just bought an HP Officejet 6600 e-All-in-One Printer - H711a. I want to have a wireless connection between my computer and my printer in order to place the printer in a different room. The instructions say that I need to give the name of my wireless network. Do they mean that I need a wireless internet connection? I absolutely don't want to go wireless on the internet. How do I go about this?

Replacing your wireless router now try.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I have a hp7250 all in one printer and it just stopped printing hp printer says radio not working

i have a hp 7250 all in one printer it just stopped printing my compute says its offline but when i go to pinter and try set up it says cannoct connect then review says raido not working

If that reset did not resolve the issue, and the printout indicates that the wireless radio is not working then there are a few options that we can go through.
First, make sure that through the Setup Menu that the wireless has been enabled and turned on. If these options are not available, you may have to try a differnet reset that I will PM to you.
Also, if the wireless radio is not functional then you might consider connecting the printer directly to the router using an Ethernet cord and reinstalling the printer on your computer using that method of communication.
Let me know! Happy holiday!

EA4500 Router and HP OJ8600 all in one printer interface questions.

Similar Messages

Maybe you are looking for